In the documentation for the example Live Caller ID server (https://swiftpackageindex.com/apple/live-caller-id-lookup-example/main/documentation/pirservice/testinginstructions) there is an example service-config.json. file shown (without thorough documentation). That config file, and the whole of the instructions, center around there being two datasets of numbers: block and identity. My question is - is it possible for more than one dataset to be specified i.e. for block1 and block2 to be specified? The use case for this would be - suppose the Live Caller ID server has a set of numbers it has identified as being nuisance callers and so it lists these in the block section. However user A might want all these nuisance callers to be blocked but user B does not. Therefore the Live Caller ID extension on the handset would need to use a different dataset on the server so that user A's calls from a set of numbers is blocked, but user B's are not. Note that I'm not suggesting that the Caller ID server should be capable of storing individual user's preferences. All that would be required would be two data sets: one where blocked content is none and and one where blocked content is some. Then a user/app could switch between them as indicated by the user. Is that possible? If the database structure and service-config.json etc. is not configured to permit that, then could two different servers be set up to achieve this instead? i.e. so the server url specified in the app's extension can be set at run time and not at compile time?

With the Live Caller ID example server, the caller lookup dataset is defined in an input.txtpd and processed by running a ConstructDatabase command which creates a block.binpb and an identity.binpb file. In other words, a static input file is being processed into static block and identity files. However, in the real world, the data content for identified and blocked numbers is something which is in a constant state of flux and evolution, as new numbers becoming available, old ones become stale, numbers which were initially considered safe change into being considered malicious etc. etc. Is the example server just that, merely an example using fixed datasets, and an actual production server is able to use live every changing data to formulate its response back to the iPhone OS query? Here's a concrete use case - suppose it's a requirement to permit US nanp numbers but to block anything else. The total number of non US nanp numbers is so large and ever changing that it would be unfeasible to attempt to capture them in an input.txtpd file and then process that, and then to re-capture and re-process it endlessly. Instead what would be required is the ability for the Live Caller ID server to evaluate at query time, using a regular expressions for example, if a number is nanp or not. Is this possible?

I've got an existing app which is using some 3rd party xcframeworks within its app extensions (for example within a Notification Service Extension). Within the target for the app extensions there is a Frameworks and Libraries section where the xcframework was dragged and dropped into. However now I want to create a new project and do a similar thing, within the app's target there is a Frameworks and Libraries section, but when an app extension target is created, Xcode is not adding a Frameworks and Libraries section. There is a Link Library with Binary section, however this doesn't have an embed section (where you can select to embed, don't embed, embed without signing etc.) and I get build error trying to drag and drop the xcframework in here. Where id the Framewoks and Libraries section go for app extensions for projects created with Xcode 16? How can this section be added?

I have a question regarding specifying URLs for a Message Filter App Extension. https://developer.apple.com/documentation/identitylookup/creating-a-message-filter-app-extension The documentation states “If you have servers that can help your app extension determine how to handle a message, you must add the Associated Domains capability to your Xcode project and specify those domains.” The term servers and domains is specified in the plural, and adding two occurrences of ILMessageFilterExtensionNetworkURL to the info.plist doesn’t cause a build error. So the first question is: 1.What is the behaviour of the OS when two instances of ILMessageFilterExtensionNetworkURL but specifying different urls is defined? Does the OS, for example always try one url first, and if that doesn’t respond after N seconds, it attempts the second one? Can the Message Filter Extension indicate which of multiple defined ILMessageFilterExtensionNetworkURL should be used at run time? 3.How does the OS behave if a URL specified for ILMessageFilterExtensionNetworkURL resolves to two VIPs? Will the OS retry if the first VIP is not accessible (similar to any typical browser or web application behavior). Thank you

I want to set the minimum deployment to 16.0, however Xcode (16.2) won't let me select that. In the drop down box it shows 18,17,16,15, however if any of these is selected it sets them as 18.6, 17.6, 16.6 or 15.6 (see image) If an attempt is made to edit the value manually, to 16.0, then after change it, Xcode just deletes that value and sets it to nothing. What's going on here? Why is Xcode only allowing the version other than be something.6 and why will it not let you manually edit it?

I'm trying to diagnose an issue with a Message Filtering Extension not working. The associated domain for the server is not currently publicly hosted, so the associated domains specified for the app are postpended with ?mode=developer On application installation I filtered OS logging by the swcd process and saw this logged: debug 08:40:01.125071-0800 swcd Skipping domain vz….qa….cl….ce….com?mode=developer because developer mode is disabled But developer mode IS enabled on the phone (Settings/Privacy & Security/Developer Mode is set to On). Therefore why is swcd saying developer mode is disabled? Is the developer mode mentioned in the documentation not actually the Developer Mode in the iPhone's setting but something else? That wouldn't appear to be the case because the documentation explicitly states "Specifies that only devices in developer mode can access the domain." Full Documentation: https://developer.apple.com/documentation/BundleResources/Entitlements/com.apple.developer.associated-domains If you use a private web server, which is unreachable from the public internet, while developing your app, enable the alternate mode feature to bypass the CDN and connect directly to your server. To do this, add a query string to your associated domains entitlement, as shown in the following example: :?mode= developer Specifies that only devices in developer mode can access the domain. So I've: turned developer mode on for the device have added ?mode=developer to the domain am building/running using a developer certificate. But why does swcd log that developer mode is disabled?

The documentation for adding a Message Filter Extension states that the Associated Domains capability should be added to the Xcode project. But what does that mean, should it be added to the app extension, to the app, or to both the app extension and the app? The documentation doesn't say which exactly.

I experimented a lot with Live Caller ID when it first appeared with iOS 18 Beta. Now I'm starting to pick it up again and have immediately noticed some detrimental differences between the behavior observed when it was in beta status to how it currently behaves with iOS 18.3. The main difference is caching - if a call is made and data from a live call id lookup displayed on the call screen, then if the call is made again immediately then that data is re-fetched from the server. And it takes a long time too, about 5 or 6 seconds before the data is displayed in the call screen (with the beta it took about 3 seconds). In the data set cache_expiry_minutes is set to 50, yet it's not being honored, there's no caching occurring at all. Yet this did used to occur several months ago when the feature was in beta. What's happened to caching, why is it no longer working when it used to? Another change is there used to be a notification displayed when a call was blocked, this no longer is displayed. Is this an intentional change or a bug?

The BUNDLE_DISPLAY_NAME of my app changes (between Testing, Staging, Production) so that it's obvious to testers etc. which varian they are using. The name contains unicode space to ensure the OS doesn't apply kerning to the spacing within the app name. If this is put directly into the info.plist then on the iPhone desktop it's displayed as desired i.e. if the info.plist contains My Application Name Then on the iPhone desktop it displays as: My Application Name However if the name is defined in an .xcconfig file as BUNDLE_DISPLAY_NAME = Xfinity Call Guard And the info.plist contains $(BUNDLE_DISPLAY_NAME) Then the name is displayed on the iPhone desktop as My Application N.... Is there a way to specify the name with the unicode characters within an .xcconfig and get that to appear as spaces on the desktop?

I've got some materials in an app's bundle (some info.plist values, and some images in .xcassets files etc.) If I access them from within an app extension (a notification service extension, notification content extension for example), then it appears to work. However while running the extensions in the debugger, there were some messages in the console saying the app bundle wasn't loaded. So despite it working, this message made me wonder if its not a safe practice and it working was luck and/or timing etc. and if the materials should instead be duplicated within the extension bundle and obtained from there instead of accessing them from the app bundle?

I can sucessfully send pushes to an app (which has been installed/run via Xcode) when the pushes are going through the Apple sandbox server. However I want to test the server is configured correctly to send them through the Apple production server. In the Xcode scheme I tried to change the build configuration to release (and ticked debug executable off) ,however the pushes still only work when sent through the sandbox. Is there a way of installing/running the app using Xcode such that its compatible with the push production environment? Does the APS Environment entitlement come into play here? this only ever says development. (The app is on behalf of a 3rd party company, they've added me to their apple developer account but with limited powers, I can't upload to Testflight nor make an ad-hoc release with with to test with)

I'm attempting make to make a distribution build of an app. In the Xcode target the supported destinations has only iPhone and build active architectures only is set to NO. I created an archive, then selected Distribute App/ Debugging, but then got this error: Provisioning profile "iOS Team Provisioning Profile: com.abc.def" doesn't include the currently selected device "DT-iPad-XXXX" (identifier YYYY-YYYYYY). I've no idea what this device is, it's nothing to do with me, somebody must have added it to the provisioning profile. But that should be beside the point shouldn't it? Because this device has never ever been connected to my Mac/Xcode and so can't be "the currently selected device". So I tried again. I changed build active architectures to YES and connected an iPhone to the Mac/Xcode and created an archive again. But it was the exact same error. What's going on, why is Xcode saying this iPad is the currently selected device when attempting to make a distribution?

We have an app which is using CTSubscriber.simInserted (using the carrier entitlement com.apple.CommCenter.fine-grained). In iOS 18, simInserted returns false for every sim (where it should instead be returning true). Presumably this just is a temporary bug in 18 beta?

In the documentation for a Message Filter Extension it states: If you have servers that can help your app extension determine how to handle a message, you must add the Associated Domains capability to your Xcode project and specify those domains. (https://developer.apple.com/documentation/sms_and_call_reporting/sms_and_mms_message_filtering/creating_a_message_filter_app_extension) The words servers and domains are in the plural. If it's possible to specify multiple servers/domains for a Message Filter Extension then how is that done? There's no documentation nor reference for that. If multiple domains can be added to the info.plist then what is the iOS behavior in that case? Can the extension supply/change which domain is used at run time?

One of the questions Apple ask regarding iOS apps is "Does your app provide end-to-end encryption?" But without defining exactly what they mean by end-to-end encryption specifically. Isn't HTTPS basically etee? Therefore any app that contacts a server using https provides end-to-end encryption? Or does the question mean something additional above and beyond https?