how do I put the app i am developing on my apple th for testing?my apple tv is the latest 4K model.

I tried to run multiple demos utilising spatial audio. However no matter what I do, I only get 2 channel output. Which is also confirmed by calling:       let numHardwareOutputChannels = gameView.audioEngine.outputNode.outputFormat(forBus: 0).channelCount My appleTV is connected to DolbyAtmos capable audio system which works just fine. So my question is more less - how to convince TVOS app that my appleTV has multichannel output ?!

Hi all, I've been using a Robin ProLine Doorbell for almost 1 year now. It allows me to see a live video from my doorbell and start a live conversation with a visitor, right from the Apple Home app. Prior to the launch of Logitech Circle View Doorbell, it was the only doorbell officially supporting HomeKit Secure Video. My setup: I'm subscribed to iCloud+ (the 2TB plan), so I've set the Robin ProLine Doorbell to record video when specific motion is detected and store in iCloud. Excellent feature, and I've used it a lot. I have an Apple TV device with Doorbell Notifications enabled, meaning that is shows a Live video pop-up in the top-right corner of my TV, whenever a visitor rings the doorbell. Great feature as well. I have a few HomePod mini devices in my home, which all make a Doorbell Chime sound when a visitor rings the doorbell. And of course, my iPhone and iPad show a notification with a still photo, when a visitor rings the doorbell. Recently however, not sure since when, I‘ve been unable to see a live video from my doorbell (and start a live conversation) in the Apple Home app, right after a visitor rings the doorbell. These are the steps to reproduce the problem: A visitor rings the doorbell. My HomePod minis all make a chime sound. My Apple TV shows a pop-up notification (including a live video of the visitor). My iPhone and iPad show a notification (including a still photo of my visitor). I open the Apple Home app, on my iPhone, and open the doorbell camera. After step 5, I expect to see a live video from my doorbell and to be able to start a live conversation with my visitor. However, I always get the same error message. The Apple Home app says: „Camera not available – Wait until someone else in this home stops viewing this camera and try again.“ Note that I am the only user in my Home, so no one else is viewing my camera. Also note that the problem does not occur, if I turn off my Apple TV notifications, which includes a live video of my visitor. Therefore, I'm convinced that my Apple TV notification is this „someone else“ that I am asked to wait for, in the error message in the Apple Home app. I just spoke to Robin support about this problem and here's their reply: Hi Atli, HomeKit support for doorbells started with the requirements of two simultaneous video streams. In that time, notifications over AppleTV were not supported, recording was also not introduced. So two people could simultaneously see and talk to a person at the door. Our Robin doorbell is able to deliver two simultaneous audio/video streams in custom resolutions. We can still do that this day. Apple introduced a new feature HomeKit Secure Video after this. Enabling this feature automatically use one of these two streams. So only one is left. Recently Apple updated the AppleTV software and introduced the live video preview that is started automatically when someone rings the doorbell. If recording is also enabled, the last available video stream is used for this. To be clear, this is a design decision of Apple, not the companies creating the HomeKit doorbell. So we as hardware and software manufacturer can’t do anything to change this. So unfortunately no firmware will fix this. The fix has to come from Apple in their AppleTV HomeKit implementation. That is the reason why I asked you to talk to Apple support about this. Best Regards, So my questions are: Does the Logitech Circle View Doorbell support 3 (or more) continuous video streams; one for iCloud recording, one for Apple TV notification, and one for a Home user to speak to visitor? Who's to blame for this ***** up? Robin hardware or Apple software? How (and where) do I report this to Apple?

Ohai everyone, I am the developer of Stress Ball Breaker, a little breakout game. The three versions are compatible with game controllers, these are required on the tvOS version and remain optional on others versions. The game is available on the App Store for iOS, macOS and tvOS. On Wednesday, I have submitted an update on the App Store. The iOS and macOS versions were quickly accepted, but the tvOS version was suddenly rejected. Previous builds were accepted without any problem. The build was "out of compliance with Guideline 2.1 - Performance - App Completeness", because my app would not respond when user attempts to start game. When I'm testing it on my Apple TV and a game controller connected to it, everything works like a charm. The game controller I am using is a Nimbus Steelseries controller and is MFI-compliant. I have submitted two more builds of the tvOS version with little changes (I have made game controllers working on tvOS simulator). Both builds were rejected too. Now, I am asked to provide additional informations and to "update my plist to include the appropriate External Protocols for the associated MFi accessory. Accessories that use an External Accessory protocol [...] must complete the MFi self-certification process, under the MFi Program". I am also asked to join the MFI program, as if my app was only compatible with a custom game controller of which I would be the manufacturer! My app uses the GameController framework, which is part of the public APIs, so my app can use any Bluetooth gamepad connected to an iPhone, iPad, MacBook or Apple TV. The only thing I have to do is to check the "Extended Gamepad" option on Xcode under the "Signing and Capabilities" tab in my project settings. That's all! I don't know why my app is rejected. I have submitted an appeal, which was closed. The App Store Review requests additional information I can't provide! I don't see any other solution than to cancel my app submission and to remove the tvOS version from the App Store, because future builds will be probably rejected for the same reason. Can someone help me to solve this issue? Thanks in advance! Best regards, Frédéric

I wan't to use local UDP server. when i use apple tv simulation device has no problem,but occur err ' listen udp :53: bind: address already in use. ' with real device. Is there a way to close or change the other local DNS service?

We, (the registered Apple Developer, let us say Organisation X with team ID A1B2C3D4E) have two apps, let us call them A and B (bundle IDs com.organisation.project.appa and com.organisation.project.appb respectively). A has both an iOS and a tvOS version. B presently has an iOS version only. App A has Universal Search for Apple's TV app implemented and it works fine. We want to migrate our users from A to B over a few months' time with both apps being available to users. We want Universal Search to work with app B as-well and are preparing the requisite feeds for it. As per Apple's developer documentation, we must have our app ready on both iOS and tvOS. However, we would like to use app A's tvOS version on, well, tvOS, instead of developing a new tvOS extension for app B. So, if a user is on iOS, they are taken to app B when searching within Apple's TV app. But when they are on tvOS, they are taken to app A from the TV app search results. If we update our feeds such that the iOS deeplinks point to app B and tvOS deeplinks point to app A, would this approach work, as-in, will Apple allow this? Another question is that is the assumption that 'in this situation (two apps from one developer working in unison for Universal Search functionality) we will need to have a single feed as it seems to be mapped to the team ID and not the app', correct?

I am developing a tvOS application and I wanted to use a view like split-screen of course I need focus management in it. I've seen a video from WWDC and my research that this can be done with the prefersDefaultFocus(_:in:)modifier. I even made a little demo. While it works fine if TabView is not used on the screen, prefersDefaultFocus(_:in:) does not work when TabView is added. Have any of you encountered this situation? How can it be overcome? Here is my code sample, you can test both cases; @main struct MyApp: App { var body: some Scene { WindowGroup { //ContentView() ContentWithTabView() } } } struct ContentView: View { @Environment(\.resetFocus) var resetFocus @Namespace private var namespace var body: some View { HStack(spacing: 100) { Group { VStack { Button ("1") {} .prefersDefaultFocus(in: namespace) Button ("2") {} Button ("3") {} }} Group{ VStack { Button ("1") {} Button ("2") {} Button ("3") {} Button ("Reset to default focus") { resetFocus(in: namespace) } } } } .focusScope(namespace) } } struct ContentWithTabView: View { var body: some View { NavigationView { TabView { ContentView() .tabItem { Image(systemName: "house.fill") Text("Home") } ContentView() .tabItem { Image(systemName: "house.fill") Text("Home") } } } } }

Hello, every time I run my tvOS app there is a message in the console: [APPNAME] buildPluginList:872: *** ERROR: failed to load 'RawCamera' bundle: 'dlopen(/System/Library/CoreServices/RawCamera.bundle/RawCamera, 0x0101): tried: '/Users/aridea/Library/Developer/Xcode/DerivedData/APPNAME-blgkajfaodntqofyapsedvglgjjp/Build/Products/Debug-appletvsimulator/RawCamera' (no such file), '/Applications/Xcode.app/Contents/Developer/Platforms/AppleTVOS.platform/Library/Developer/CoreSimulator/Profiles/Runtimes/tvOS.simruntime/Contents/Resources/RuntimeRoot/usr/lib/system/introspection/RawCamera' (no such file), '/Applications/Xcode.app/Contents/Developer/Platforms/AppleTVOS.platform/Library/Developer/CoreSimulator/Profiles/Runtimes/tvOS.simruntime/Contents/Resources/RuntimeRoot/System/Library/CoreServices/RawCamera.bundle/RawCamera' (no such file), '/System/Library/CoreServices/RawCamera.bundle/RawCamera' (no such file), '/usr/lib/RawCamera' (no such file)' what is causing this error?

Hey, I paired an Apple TV 4K with my Mac Pro. From Xcode, I tried running the test directly on the device, the test executes. When I try to trigger the same test through command line, it fails with xcodebuild: error: Unable to find a destination matching the provided destination specifier The test works fine for an Apple TV and only fails for Apple TV 4K. I have added the command and complete output in the file attached below log.txt Here are a few additional questions apart from the test not running through command line What is "Transient Testing Scheme", and how can this be refreshed or deleted? Basically, it shows many other devices as well which are connected to Xcode currently but were connected in the past. Why is this happening only for Apple TV 4K? When I execute the test through GUI, it passes. Is there a way to know which command X code is running behind the scenes?

I want implement a UI in tvOS. The hierarchy is like this: App -> Tab Bar -> <Home, Search, Settings> When I'm in Home and want to play a VOD, I want to hide tab bar (top menu) so the video is playing without overlay. Using .isHidden on TabView result in hiding eveything because of the hierarchy. Using .focused also do nothing. How to achieve it?

While playing apple music playlist on apple tv, there is no sound output for random songs in the playlist. Lyrics just scrolls without audio. Occurs more frequently, even with latest TV OS update.

I have a game with SpriteKit for iPhone, iPad and Mac. I am gonna make for Apple TV. But I take it override func touchesBegan(_ touches: Set<UITouch>, with event: UIEvent?) { doesn't work for tvOS. Then what I am supposed to use to make my buttons selectable and I can press ones?

About 5 years ago my wife and I purchased an Apple TV , (4th gen, model A 1625); it ended up getting put aside, and lost in the shuffle until this week the she found it. We have been attempting to set it up, but it has been unable to connect to Apple servers to activate; we have tried to connect with a device (iPad Pro, with working wifi connection, and manually. We thought maybe there was a problem on Apple's end, so we decided to try again the next day, but now we've tried everyday for 3 days without success. Tonight I decided to try and do a restore by connecting it to my Mac Book Pro (mid 2014 Retina 15 inch, w/ Big Sur), and it does show up, and the Mac Book offers to upgrade and restore it, but when I attempted to do so, after downloading the software, when it attempts to install, it stops and gives a message that says "The Apple TV “Apple TV” could not be restored because the firmware file was corrupt.". The Apple TV shows it is currently running tvOS 9.0. It is a 5 year old device, but was never taken out of the box until this week.

Any insight on how I can add support for the Outer Ring "jog" gesture that is new on the Apple TV 4K Siri Remote? This was demo'd during the Apple Special event earlier this year. I do know that access to taps on the TouchPad is a little esoteric so curious if anybody's figured this out. Haven't seen it documented anywhere.

I can use Xcode 13.1 to install/run my tvOS App on an Apple TV Device (with tvOS 15.1.1) (i.e. Xcode has paired with my Apple TV wirelessly), but the instrument tool (13.0) can't detect my Apple TV and only shows my Mac and my iPhone (which is connected via cable). Anyone has any idea whether wireless instrumentation is supported or not? If not supported, any alternative hack? Thx ahead.

"Notification Center" is not registered on tvos Even if you "get PendingNotificationRequests" after registering "Notification Center" on tvos, the value remains 0. No Error is issued when "add" is done, and the cause is unknown. It is strange that information such as "title", "subtitle", and "body" cannot be registered in "Notification Content" in the first place. If anyone knows how to deal with it, please do so.

I have a view controller with a text field on it. In general, it works fine. But when this view controller is presented from a search results view controller the text field doesn't react on taps. The results controller is wrapped in UISearchController and at the same time, UISearchController is placed to UISearchContainerViewController. let resultsController = SearchResultsViewController() let searchController = UISearchController(searchResultsController: resultsController) let container = UISearchContainerViewController( searchController: searchController) container.view.backgroundColor = .black present(container, animated: true) I pushed a small example on GitHub. There is a workaround to make the text field work: add UISearchContainerViewController as a child controller on some dummy view controller and present it. But such an approach involves weird memory leaks which I'd like to avoid.