Adding Text

The canvas element supports basic text rendering on a line-by-line basis. Just enter a line of text and an x,y coordinate for the text box using the fillText("text", x, y) or strokeText("text", x, y) method. The text is rendered using the current stroke or fill style, which can be a color, gradient, or pattern.

You can specify a number of text settings, such as the font family, size, and weight, and the text alignment and baseline.

For example, the following snippet prints “Figure 1” on the canvas at coordinates 10, 250 in 24-point Helvetica. The default alignment and baseline are used.

function drawText() {
    ctx.fillStyle = "blue";
    ctx.font = "24pt Helvetica";
    ctx.fillText("Figure 1", 10, 250);

Text is not word-wrapped at the boundaries of the canvas. The text box extends automatically to hold the specified text on a single line. You need to create a separate text box for each line of text.

Text Settings

Before you add text to the canvas, you need to set either the fill or stroke style (see Set the Stroke and Fill Styles for details). You probably also want to specify text settings, unless you want to use the browser’s default settings.

Font Settings

You can specify font settings by setting the context’s font property. The font property is set using the same syntax as the all-in-one CSS font property. You can specify any or all of the font settings, space or comma delimited, as appropriate. For example:

ctx.font = "24pt Helvetica bold, sans-serif"

specifies a preference for 24-point, bold Helvetica, falling back to a generic sans-serif font if Helvetica is unavailable.

You are not limited to the fonts the user has installed on the host device. The canvas has access to any fonts loaded in your webpage using the CSS @font-face property, once the fonts have loaded.

Text Direction

The default text direction is left-to-right. You can change this by setting the canvas dir property to rtl.

For example, document.getElementsByTagName('canvas')[0].dir = 'rtl'; would change the text direction of the first canvas element to right-to-left.

Possible values for dir are rtl and ltr.

Note that text direction is a standard HTML property, not specific to the canvas, and can be inherited from parent elements such as the document body.

Text Alignment

Set the text alignment (sometimes called justification) by setting the context’s textAlign property. Possible values are start, end, left, right, and center.

The start and end values are the same as the left and right values, but are dependent on the text direction. If the text direction is left-to-right, start is the same as left, and if the text direction is right-to-left, start is the same as right.

The textAlign property changes the meaning of the x-coordinate specified in strokeText("text", x,y) or fillText("text", x,y). The x-coordinate specifies the left, right, or center of text box, depending on the textAlign setting.

Figure 5-1 shows the different text alignment settings applied to text drawn at the same x-coordinate, shown by the red line.

Figure 5-1  Text alignment

Text Baseline

The text baseline is specified by the y-coordinate in fillText(text, x,y) or strokeText(text, x,y).

The default text baseline is the alphabetic baseline—the bottom of most letters in the roman alphabet (the descender of a lowercase y, p, or q drops below it).

You can change the text baseline by setting the context’s textBaseline property. Legal values are:

  • top

  • hanging

  • middle

  • alphabetic

  • ideographic

  • bottom

The position of each baseline value, relative to the bounding box, is shown in Figure 5-2.

Figure 5-2  Text baselines

The following snippet positions the text baseline so the text is vertically centered in the bounding box.

ctx.textBaseline = "middle";

Bounding Box Width

Suppose that your canvas needs to include text that’s supplied at runtime. You might want to break the text into multiple lines, or scale the text, depending on its length, or you might need to position the text relative to a graphic element. To do any of these things, you need to know how large the bounding box for the text would be.

The measureText() method takes a string as an argument and returns a metric. The width property of the metric is the width in pixels of the needed bounding box with the current font settings.

The following snippet iterates through an array of player names, measures the width of the bounding box needed to hold each name, prints the name, and positions an image ten pixels to the right of the bounding box.

for (var i = 0; i < players; i++) {
   var name = playerName[i];
   var metric = measureText(name);
   var edge = metric.width;
   ctx.fillText(name, 0, 50 * i);
   ctx.drawImage(playerIcon, edge + 10, 50 * i);

Drawing Text

The context has two methods for drawing a line of text. Both methods define a text box.

The fillText(text, x, y [,maxWidth]) method fills the text in the current fill style. The strokeText(text, x, y [,maxWidth]) method outlines the text in the current stroke style. Both methods accept the same arguments.

The text parameter must be a string, and can contain Unicode characters.

The x parameter is the alignment point for the text box, as set in the context’s textAlign property. The default is the left edge of the text box.

The y parameter is the text baseline within the bounding box, as set in the context’s textBaseline property. The default setting is alphabetic—in line with the bottom of roman letters without descenders.

You can pass in an optional maxWidth value, which scales the text, if needed, to fit in a text box no wider than maxWidth.

Listing 5-1 displays the text “Hello, world.” in 24-point Helvetica, centered horizontally and vertically, filled in blue on a white background. The result is shown in Figure 5-3.

Figure 5-3  Hello world

Listing 5-1  Drawing “Hello, world.”

    <title>Hello world</title>
    <script type="text/javascript">
        var can, ctx;
        function init() {
            can = document.getElementById("can");
            ctx = can.getContext("2d");
        function drawText() {
            ctx.fillStyle = "blue";
            ctx.font = "24pt Helvetica";
            ctx.textAlign = "center";
            ctx.textBaseline = "middle";
            ctx.fillText("Hello, world.", can.width / 2 , can.height / 2);
<body onload="init()" style="background-color:#000">
    <canvas id="can" height="200" width="400" style="backgroundcolor:#fff">

Animating Text

Like any other visual element, text can be rotated, scaled, transformed, and animated.

The usual sequence for animation applies:

  1. Clear the canvas.

  2. Save the context.

  3. Change the context settings.

  4. Draw the next frame.

  5. Restore the context.

To repeat the animation, the steps are grouped into a function, and the function is called periodically after a suitable delay—using setInterval() for endless animations, or setTimeout() for animations that repeat conditionally.

When rotating an element, the simplest approach is to follow these steps:

  1. Translate the context to the x and y coordinates of the element.

  2. Rotate the context.

  3. Draw the element, centered at 0,0.

    (For a detailed explanation of why you should follow these steps, see Rotation.)

Listing 5-2, displays the string “Hello, world!” in 48 point Helvetica, filled in blue. The text spins in, starting small and growing to its full size as it spins, as illustrated in Figure 5-4.

Figure 5-4  Animated text

To achieve this effect, the text is scaled and rotated repeatedly. The rotation goes from 0 to 2 x Pi radians (0-360°). The animation takes place over a fixed number of steps, so a rotation increment of 2 * Pi / steps is calculated. A scale increment of 1 / steps is calculated, so the scale will grow to 1 in steps.

Listing 5-2  Animating text

    <title>Hello world!</title>
    <script type="text/javascript">
        var can, ctx, addAngle, addScale,
            step, steps = 50, delay = 20;
        function init() {
            can = document.getElementById("can");
            ctx = can.getContext("2d");
            addAngle = Math.PI * 2 / steps;
            addScale = 1 / steps;
            step = 0;
            ctx.fillStyle = "blue";
            ctx.font = "48pt Helvetica";
            ctx.textAlign = "center";
            ctx.textBaseline = "middle";
        function spinText() {
            ctx.clearRect(0,0, can.width, can.height);
            ctx.translate(can.width / 2, can.height / 2);
            ctx.scale(addScale * step, addScale * step);
            ctx.rotate(addAngle * step);
            ctx.fillText("Hello, world!", 0, 0);
            if (step < steps)
                var t = setTimeout('spinText()', delay);
<body onload="init()">
    <canvas id="can" height="200" width="400">