Legacy Document

Important: The information in this document is obsolete and should not be used for new development.

Inside Macintosh: Devices /: Chapter 3 - SCSI Manager

Summary of the SCSI Manager

Pascal Summary

Constants

CONST
   scInc       = 1;     {transfer data, increment buffer pointer}
   scNoInc     = 2;     {transfer data, don't increment pointer}
   scAdd       = 3;     {add long to address}
   scMove      = 4;     {move long to address}
   scLoop      = 5;     {decrement counter and loop if > 0}
   scNop       = 6;     {no operation}
   scStop      = 7;     {stop TIB execution}
   scComp      = 8;     {compare SCSI data with memory}
   {signature values}
   sbSIGWord   = $4552;    {driver descriptor map signature}
   pMapSIG     = $504D;    {partition map signature}

Data Types

TYPE SCSIInstr =
   RECORD
      scOpcode:         Integer;    {operation code}
      scParam1:         LongInt;    {first parameter}
      scParam2:         LongInt;    {second parameter}
   END;
   Block0 = 
   PACKED RECORD
      sbSig:         Integer;    {device signature}
      sbBlkSize:     Integer;    {block size of the device}
      sbBlkCount:    LongInt;    {number of blocks on the device}
      sbDevType:     Integer;    {reserved}
      sbDevId:       Integer;    {reserved}
      sbData:        LongInt;    {reserved}
      sbDrvrCount:   Integer;    {number of driver descriptor entries}
      ddBlock:       LongInt;    {first driver's starting block}
      ddSize:        Integer;    {size of the driver, in 512-byte blocks}
      ddType:        Integer;    {operating system type (MacOS = 1)}
      ddPad:         ARRAY [0..242] OF Integer; {additional drivers, if any}
   END;
   Partition = 
   RECORD
      pmSig:         Integer;    {partition signature}
      pmSigPad:      Integer;    {reserved}
      pmMapBlkCnt:   LongInt;    {number of blocks in partition map}
      pmPyPartStart: LongInt;    {first physical block of partition}
      pmPartBlkCnt:  LongInt;    {number of blocks in partition}
      pmPartName:    PACKED ARRAY [0..31] OF Char; {partition name}
      pmParType:     PACKED ARRAY [0..31] OF Char; {partition type}
      pmLgDataStart: LongInt;    {first logical block of data area}
      pmDataCnt:     LongInt;    {number of blocks in data area}
      pmPartStatus:  LongInt;    {partition status information}
      pmLgBootStart: LongInt;    {first logical block of boot code}
      pmBootSize:    LongInt;    {size of boot code, in bytes}
      pmBootAddr:    LongInt;    {boot code load address}
      pmBootAddr2:   LongInt;    {reserved}
      pmBootEntry:   LongInt;    {boot code entry point}
      pmBootEntry2:  LongInt;    {reserved}
      pmBootCksum:   LongInt;    {boot code checksum}
      pmProcessor:   PACKED ARRAY [0..15] OF Char; {processor type}
      pmPad:         ARRAY [0..187] OF Integer;    {reserved}
   END;

Routines

FUNCTION SCSIReset		: OSErr;
FUNCTION SCSIGet		: OSErr;
FUNCTION SCSISelect		(targetID: Integer): OSErr;
FUNCTION SCSISelAtn		(targetID: Integer): OSErr;
FUNCTION SCSICmd		(buffer: Ptr; count: Integer): OSErr;
FUNCTION SCSIMsgIn		(VAR message: Integer): OSErr;
FUNCTION SCSIMsgOut		(message: Integer): OSErr;
FUNCTION SCSIRead		(tibPtr: Ptr): OSErr;
FUNCTION SCSIRBlind		(tibPtr: Ptr): OSErr;
FUNCTION SCSIWrite		(tibPtr: Ptr): OSErr;
FUNCTION SCSIWBlind		(tibPtr: Ptr): OSErr;
FUNCTION SCSIComplete		(VAR stat: Integer; VAR message: Integer; 
				wait: LongInt): OSErr;
FUNCTION SCSIStat		: Integer;

C Summary

Constants

enum {
   /* TIB instruction opcodes */
   scInc       = 1,        /* transfer data, increment buffer pointer */
   scNoInc     = 2,        /* transfer data, don't increment pointer */
   scAdd       = 3,        /* add long to address */
   scMove      = 4,        /* move long to address */
   scLoop      = 5,        /* decrement counter and loop if > 0 */
   scNop       = 6,        /* no operation */
   scStop      = 7,        /* stop TIB execution */
   scComp      = 8,        /* compare SCSI data with memory */
   /* signature values */
   sbSIGWord   = 0x4552,   /* driver descriptor map signature */
   pMapSIG     = 0x504D    /* partition map signature */
};

Data Types

struct SCSIInstr {
   unsigned short    scOpcode;      /* operation code */
   unsigned long     scParam1;      /* first parameter */
   unsigned long     scParam2;      /* second parameter */
};
typedef struct SCSIInstr SCSIInstr;
struct Block0 {
   unsigned short    sbSig;         /* device signature */
   unsigned short    sbBlkSize;     /* block size of the device*/
   unsigned long     sbBlkCount;    /* number of blocks on the device*/
   unsigned short    sbDevType;     /* reserved */
   unsigned short    sbDevId;       /* reserved */
   unsigned long     sbData;        /* reserved */
   unsigned short    sbDrvrCount;   /* number of driver descriptor entries */
   unsigned long     ddBlock;       /* first driver's starting block */
   unsigned short    ddSize;        /* driver's size, in 512-byte blocks */
   unsigned short    ddType;        /* operating system type (MacOS = 1) */
   unsigned short    ddPad[243];    /* additional drivers, if any */
};
typedef struct Block0 Block0;
Partition {
   unsigned short    pmSig;         /* partition signature */
   unsigned short    pmSigPad;      /* reserved */
   unsigned long     pmMapBlkCnt;   /* number of blocks in partition map */
   unsigned long     pmPyPartStart; /* first physical block of partition */
   unsigned long     pmPartBlkCnt;  /* number of blocks in partition */
   unsigned char     pmPartName[32];/* partition name */
   unsigned char     pmParType[32]; /* partition type */
   unsigned long     pmLgDataStart; /* first logical block of data area */
   unsigned long     pmDataCnt;     /* number of blocks in data area */
   unsigned long     pmPartStatus;  /* partition status information */
   unsigned long     pmLgBootStart; /* first logical block of boot code */
   unsigned long     pmBootSize;    /* size of boot code, in bytes */
   unsigned long     pmBootAddr;    /* boot code load address */
   unsigned long     pmBootAddr2;   /* reserved */
   unsigned long     pmBootEntry;   /* boot code entry point */
   unsigned long     pmBootEntry2;  /* reserved */
   unsigned long     pmBootCksum;   /* boot code checksum */
   unsigned char     pmProcessor[16];  /* processor type */
   unsigned short    pmPad[188];    /* reserved */
};
typedef struct Partition Partition;

Functions

pascal OSErr SCSIReset     (void);
pascal OSErr SCSIGet       (void);
pascal OSErr SCSISelect    (short targetID);
pascal OSErr SCSISelAtn    (short targetID);
pascal OSErr SCSICmd       (Ptr buffer, short count);
pascal OSErr SCSIMsgIn     (short *message);
pascal OSErr SCSIMsgOut    (short message);
pascal OSErr SCSIRead      (Ptr tibPtr);
pascal OSErr SCSIRBlind    (Ptr tibPtr);
pascal OSErr SCSIWrite     (Ptr tibPtr);
pascal OSErr SCSIWBlind    (Ptr tibPtr);
pascal OSErr SCSIComplete  (short *stat, short *message, 
                            unsigned long wait);
pascal short SCSIStat      (void);

Assembly-Language Summary

Data Structures

Transfer Instruction Block
0 scOpcode word operation code
2 scParam1 long first parameter
6 scParam2 long second parameter

Driver Descriptor Record
0 sbSig word device signature
2 sbBlkSize word block size of the device
4 sbBlkCount long number of blocks on the device
8 sbDevType word reserved
10 sbDevId word reserved
12 sbData long reserved
16 sbDrvrCount word number of driver descriptor entries
18 ddBlock long first driver's starting block
22 ddSize word driver's size, in 512-byte blocks
24 ddType word operating system type (MacOS = 1)
26 ddPad 486 bytes additional drivers, if any

Partition Map Entry
0 pmSig word partition signature
2 pmSigPad word reserved
4 pmMapBlkCnt long number of blocks in partition map
8 pmPyPartStart long first physical block of partition
12 pmPartBlkCnt long number of blocks in partition
16 pmPartName 32 bytes partition name
48 PmParType 32 bytes partition type
80 pmLgDataStart long first logical block of data area
84 pmDataCnt long number of blocks in data area
88 pmPartStatus long partition status information
92 pmLgBootStart long first logical block of boot code
96 pmBootSize long size of boot code, in bytes
100 pmBootAddr long boot code load address
104 pmBootAddr2 long reserved
108 pmBootEntry long boot code entry point
112 pmBootEntry2 long reserved
116 pmBootCksum long boot code checksum
120 pmProcessor 16 bytes processor type
136 pmPad 376 bytes reserved
Record

Trap Macros

Trap Macros Requiring Routine Selectors

_SCSIDispatch

Selector	Routine
$00	`SCSIReset`
$01	`SCSIGet`
$02	`SCSISelect`
$03	`SCSICmd`
$04	`SCSIComplete`
$05	`SCSIRead`
$06	`SCSIWrite`
$08	`SCSIRBlind`
$09	`SCSIWBlind`
$0A	`SCSIStat`
$0B	`SCSISelAtn`
$0C	`SCSIMsgIn`
$0D	`SCSIMsgOut`

Result Codes
`noErr` 0 No error
`scCommErr` 2 Communications error, operation timeout
`scArbNBErr` 3 Bus busy, arbitration timeout
`scBadParmsErr` 4 Bad parameter or unrecognized TIB instruction
`scPhaseErr` X Phase error on the SCSI bus
`scCompareErr` 6 Comparison error from `scComp` instruction
`scMgrBusyErr` 7 SCSI Manager busy
scSequenceErr 8 Attempted operation is out of sequence
scBusTOErr 9 Bus timeout during blind transfer
scComplPhaseErr 10 SCSI bus was not in status phase on entry to `SCSIComplete`

Shop the Apple Online Store (1-800-MY-APPLE), visit an Apple Retail Store, or find a reseller.

0	scOpcode	word	operation code
2	scParam1	long	first parameter
6	scParam2	long	second parameter

0	sbSig	word	device signature
2	sbBlkSize	word	block size of the device
4	sbBlkCount	long	number of blocks on the device
8	sbDevType	word	reserved
10	sbDevId	word	reserved
12	sbData	long	reserved
16	sbDrvrCount	word	number of driver descriptor entries
18	ddBlock	long	first driver's starting block
22	ddSize	word	driver's size, in 512-byte blocks
24	ddType	word	operating system type (MacOS = 1)
26	ddPad	486 bytes	additional drivers, if any

0	pmSig	word	partition signature
2	pmSigPad	word	reserved
4	pmMapBlkCnt	long	number of blocks in partition map
8	pmPyPartStart	long	first physical block of partition
12	pmPartBlkCnt	long	number of blocks in partition
16	pmPartName	32 bytes	partition name
48	PmParType	32 bytes	partition type
80	pmLgDataStart	long	first logical block of data area
84	pmDataCnt	long	number of blocks in data area
88	pmPartStatus	long	partition status information
92	pmLgBootStart	long	first logical block of boot code
96	pmBootSize	long	size of boot code, in bytes
100	pmBootAddr	long	boot code load address
104	pmBootAddr2	long	reserved
108	pmBootEntry	long	boot code entry point
112	pmBootEntry2	long	reserved
116	pmBootCksum	long	boot code checksum
120	pmProcessor	16 bytes	processor type
136	pmPad	376 bytes	reserved

`noErr`	0	No error
`scCommErr`	2	Communications error, operation timeout
`scArbNBErr`	3	Bus busy, arbitration timeout
`scBadParmsErr`	4	Bad parameter or unrecognized TIB instruction
`scPhaseErr`	X	Phase error on the SCSI bus
`scCompareErr`	6	Comparison error from `scComp` instruction
`scMgrBusyErr`	7	SCSI Manager busy
scSequenceErr	8	Attempted operation is out of sequence
scBusTOErr	9	Bus timeout during blind transfer
scComplPhaseErr	10	SCSI bus was not in status phase on entry to `SCSIComplete`

Legacy Document

Summary of the SCSI Manager

Pascal Summary

Constants

Data Types

Routines

C Summary

Constants

Data Types

Functions

Assembly-Language Summary

Data Structures

Transfer Instruction Block 0scOpcodewordoperation code 2scParam1longfirst parameter 6scParam2longsecond parameter

Trap Macros

Trap Macros Requiring Routine Selectors

Transfer Instruction Block
0 scOpcode word operation code
2 scParam1 long first parameter
6 scParam2 long second parameter