Legacy Document

Inside Macintosh: Operating System Utilities /

Chapter 3 - Mathematical and Logical Utilities / Mathematical and Logical Utilities Reference

Routines / Converting Between Angle and Slope Values

AngleFromSlope

You can convert a slope value to an angle value using the AngleFromSlope function.

FUNCTION AngleFromSlope (slope: Fixed): Integer;

slope

The slope, defined as Dx/Dy, which is the horizontal change divided by the vertical change between any two points on a line with the slope.

DESCRIPTION

The AngleFromSlope function returns the angle corresponding to the slope specified in the slope parameter treated MOD 180. Angles are defined in clockwise degrees from 12 o'clock. The negative y-axis is defined as being at 12 o'clock, and the positive y-axis at 6 o'clock. The x-axis is defined as usual, with the positive side defined as being at 3 o'clock.

SPECIAL CONSIDERATIONS

The AngleFromSlope function is most useful when you require speed more than accuracy in performing the calculation. The integer result is within 1 degree of the correct answer, but not necessarily within half a degree.

SEE ALSO

For an example of the use of the AngleFromSlope function, see Figure 3-7 on page 3-13.