ADC Home > Reference Library > Technical Q&As > Legacy Documents > QuickTime >
Legacy Document
Important: This document is part of the Legacy section of the ADC Reference Library. This information should not be used for new development.
Current information on this Reference Library topic can be found here:
|
|
Q How do I place blue screen video over a panorama? A For starters, you need to know the exact view over which you want to place video. Note that if you are only warping in one dimension, things may be a bit tricky. To get a very close match, take the following steps: 1. Push each individual frame of the motion sequence through the Stitcher (assuming that the motion fits within a single photograph) with -wrap turned off, and the same -vfov set as for the panorama. The resulting images will be warped into the same space as your complete panorama. 2. Either turn your single frame image into a partial panoramic movie or replace the appropriate part in your background panorama with the single frame. 3. p2mv and msnm it and use VR to dewarp it with warpMode 1 with the precise hpan, vpan and zoom data set. You may want to p2mv with the "raw " compressor in order to maximize your image quality. 4. Capture the image from the screen. 5. If you do this for every image (this can be automated with scripting), you should get a completely matched motion sequence which you can turn into a QuickTime movie with standard tools. This is where you should do your compression (not at Step 3). This should mostly take machine time, not your time. Step 1 can be scripted in MPW. Step 2 can be scripted in AppleScript using PhotoFlash, or in DeBabelizer. Step 3 can be scripted in MPW. Step 4 can be scripted in HyperCard or Director. Step 5 uses ConvertToMovie. Once you develop these scripting tools the first time, each sequence should be pretty quick to fire up. [Sep 01 1995] |