Mac Developer Library Developer


This manual page is part of Xcode Tools version 5.0

To obtain these tools:

If you are running a version of Xcode Tools other than 5.0, view the documentation locally:

  • In Xcode

  • In Terminal, using the man(1) command

Reading manual pages

Manual pages are intended as a quick reference for people who already understand a technology.

  • To learn how the manual is organized or to learn about command syntax, read the manual page for manpages(5).

  • For more information about this technology, look for other documentation in the Apple Developer Library.

  • For general information about writing shell scripts, read Shell Scripting Primer.

GIT-ADD(1)                                       Git Manual                                       GIT-ADD(1)

       git-add - Add file contents to the index

       git add [-n] [-v] [--force | -f] [--interactive | -i] [--patch | -p]
                 [--edit | -e] [--[no-]all | --[no-]ignore-removal | [--update | -u]]
                 [--intent-to-add | -N] [--refresh] [--ignore-errors] [--ignore-missing]
                 [--] [<pathspec>...]

       This command updates the index using the current content found in the working tree, to prepare the
       content staged for the next commit. It typically adds the current content of existing paths as a
       whole, but with some options it can also be used to add content with only part of the changes made to
       the working tree files applied, or remove paths that do not exist in the working tree anymore.

       The "index" holds a snapshot of the content of the working tree, and it is this snapshot that is
       taken as the contents of the next commit. Thus after making any changes to the working directory, and
       before running the commit command, you must use the add command to add any new or modified files to
       the index.

       This command can be performed multiple times before a commit. It only adds the content of the
       specified file(s) at the time the add command is run; if you want subsequent changes included in the
       next commit, then you must run git add again to add the new content to the index.

       The git status command can be used to obtain a summary of which files have changes that are staged
       for the next commit.

       The git add command will not add ignored files by default. If any ignored files were explicitly
       specified on the command line, git add will fail with a list of ignored files. Ignored files reached
       by directory recursion or filename globbing performed by Git (quote your globs before the shell) will
       be silently ignored. The git add command can be used to add ignored files with the -f (force) option.

       Please see git-commit(1) for alternative ways to add content to a commit.

           Files to add content from. Fileglobs (e.g.  *.c) can be given to add all matching files. Also a
           leading directory name (e.g.  dir to add dir/file1 and dir/file2) can be given to add all files
           in the directory, recursively.

       -n, --dry-run
           Don't actually add the file(s), just show if they exist and/or will be ignored.

       -v, --verbose
           Be verbose.

       -f, --force
           Allow adding otherwise ignored files.

       -i, --interactive
           Add modified contents in the working tree interactively to the index. Optional path arguments may
           be supplied to limit operation to a subset of the working tree. See "Interactive mode" for

       -p, --patch
           Interactively choose hunks of patch between the index and the work tree and add them to the
           index. This gives the user a chance to review the difference before adding modified contents to
           the index.

           This effectively runs add --interactive, but bypasses the initial command menu and directly jumps
           to the patch subcommand. See "Interactive mode" for details.

       -e, --edit
           Open the diff vs. the index in an editor and let the user edit it. After the editor was closed,
           adjust the hunk headers and apply the patch to the index.

           The intent of this option is to pick and choose lines of the patch to apply, or even to modify
           the contents of lines to be staged. This can be quicker and more flexible than using the
           interactive hunk selector. However, it is easy to confuse oneself and create a patch that does
           not apply to the index. See EDITING PATCHES below.

       -u, --update
           Update the index just where it already has an entry matching <pathspec>. This removes as well as
           modifies index entries to match the working tree, but adds no new files.

           If no <pathspec> is given, the current version of Git defaults to "."; in other words, update all
           tracked files in the current directory and its subdirectories. This default will change in a
           future version of Git, hence the form without <pathspec> should not be used.

       -A, --all, --no-ignore-removal
           Update the index not only where the working tree has a file matching <pathspec> but also where
           the index already has an entry. This adds, modifies, and removes index entries to match the
           working tree.

           If no <pathspec> is given, the current version of Git defaults to "."; in other words, update all
           files in the current directory and its subdirectories. This default will change in a future
           version of Git, hence the form without <pathspec> should not be used.

       --no-all, --ignore-removal
           Update the index by adding new files that are unknown to the index and files modified in the
           working tree, but ignore files that have been removed from the working tree. This option is a
           no-op when no <pathspec> is used.

           This option is primarily to help the current users of Git, whose "git add <pathspec>..." ignores
           removed files. In future versions of Git, "git add <pathspec>..." will be a synonym to "git add
           -A <pathspec>..." and "git add --ignore-removal <pathspec>..." will behave like today's "git add
           <pathspec>...", ignoring removed files.

       -N, --intent-to-add
           Record only the fact that the path will be added later. An entry for the path is placed in the
           index with no content. This is useful for, among other things, showing the unstaged content of
           such files with git diff and committing them with git commit -a.

           Don't add the file(s), but only refresh their stat() information in the index.

           If some files could not be added because of errors indexing them, do not abort the operation, but
           continue adding the others. The command shall still exit with non-zero status. The configuration
           variable add.ignoreErrors can be set to true to make this the default behaviour.

           This option can only be used together with --dry-run. By using this option the user can check if
           any of the given files would be ignored, no matter if they are already present in the work tree
           or not.

       --This -This
           This option can be used to separate command-line options from the list of files, (useful when
           filenames might be mistaken for command-line options).

       The optional configuration variable core.excludesfile indicates a path to a file containing patterns
       of file names to exclude from git-add, similar to $GIT_DIR/info/exclude. Patterns in the exclude file
       are used in addition to those in info/exclude. See gitignore(5).

          Adds content from all *.txt files under Documentation directory and its subdirectories:

               $ git add Documentation/\*.txt

           Note that the asterisk * is quoted from the shell in this example; this lets the command include
           the files from subdirectories of Documentation/ directory.

          Considers adding content from all git-*.sh scripts:

               $ git add git-*.sh

           Because this example lets the shell expand the asterisk (i.e. you are listing the files
           explicitly), it does not consider subdir/

       When the command enters the interactive mode, it shows the output of the status subcommand, and then
       goes into its interactive command loop.

       The command loop shows the list of subcommands available, and gives a prompt "What now> ". In
       general, when the prompt ends with a single >, you can pick only one of the choices given and type
       return, like this:

               *** Commands ***
                 1: status       2: update       3: revert       4: add untracked
                 5: patch        6: diff         7: quit         8: help
               What now> 1

       You also could say s or sta or status above as long as the choice is unique.

       The main command loop has 6 subcommands (plus help and quit).

           This shows the change between HEAD and index (i.e. what will be committed if you say git commit),
           and between index and working tree files (i.e. what you could stage further before git commit
           using git add) for each path. A sample output looks like this:

                             staged     unstaged path
                    1:       binary      nothing foo.png
                    2:     +403/-35        +1/-1 git-add--interactive.perl

           It shows that foo.png has differences from HEAD (but that is binary so line count cannot be
           shown) and there is no difference between indexed copy and the working tree version (if the
           working tree version were also different, binary would have been shown in place of nothing). The
           other file, git-add--interactive.perl, has 403 lines added and 35 lines deleted if you commit
           what is in the index, but working tree file has further modifications (one addition and one

           This shows the status information and issues an "Update>>" prompt. When the prompt ends with
           double >>, you can make more than one selection, concatenated with whitespace or comma. Also you
           can say ranges. E.g. "2-5 7,9" to choose 2,3,4,5,7,9 from the list. If the second number in a
           range is omitted, all remaining patches are taken. E.g. "7-" to choose 7,8,9 from the list. You
           can say * to choose everything.

           What you chose are then highlighted with *, like this:

                          staged     unstaged path
                 1:       binary      nothing foo.png
               * 2:     +403/-35        +1/-1 git-add--interactive.perl

           To remove selection, prefix the input with - like this:

               Update>> -2

           After making the selection, answer with an empty line to stage the contents of working tree files
           for selected paths in the index.

           This has a very similar UI to update, and the staged information for selected paths are reverted
           to that of the HEAD version. Reverting new paths makes them untracked.

       add untracked
           This has a very similar UI to update and revert, and lets you add untracked paths to the index.

           This lets you choose one path out of a status like selection. After choosing the path, it
           presents the diff between the index and the working tree file and asks you if you want to stage
           the change of each hunk. You can select one of the following options and type return:

               y - stage this hunk
               n - do not stage this hunk
               q - quit; do not stage this hunk nor any of the remaining ones
               a - stage this hunk and all later hunks in the file
               d - do not stage this hunk nor any of the later hunks in the file
               g - select a hunk to go to
               / - search for a hunk matching the given regex
               j - leave this hunk undecided, see next undecided hunk
               J - leave this hunk undecided, see next hunk
               k - leave this hunk undecided, see previous undecided hunk
               K - leave this hunk undecided, see previous hunk
               s - split the current hunk into smaller hunks
               e - manually edit the current hunk
               ? - print help

           After deciding the fate for all hunks, if there is any hunk that was chosen, the index is updated
           with the selected hunks.

           You can omit having to type return here, by setting the configuration variable
           interactive.singlekey to true.

           This lets you review what will be committed (i.e. between HEAD and index).

       Invoking git add -e or selecting e from the interactive hunk selector will open a patch in your
       editor; after the editor exits, the result is applied to the index. You are free to make arbitrary
       changes to the patch, but note that some changes may have confusing results, or even result in a
       patch that cannot be applied. If you want to abort the operation entirely (i.e., stage nothing new in
       the index), simply delete all lines of the patch. The list below describes some common things you may
       see in a patch, and which editing operations make sense on them.

       added content
           Added content is represented by lines beginning with "+". You can prevent staging any addition
           lines by deleting them.

       removed content
           Removed content is represented by lines beginning with "-". You can prevent staging their removal
           by converting the "-" to a " " (space).

       modified content
           Modified content is represented by "-" lines (removing the old content) followed by "+" lines
           (adding the replacement content). You can prevent staging the modification by converting "-"
           lines to " ", and removing "+" lines. Beware that modifying only half of the pair is likely to
           introduce confusing changes to the index.

       There are also more complex operations that can be performed. But beware that because the patch is
       applied only to the index and not the working tree, the working tree will appear to "undo" the change
       in the index. For example, introducing a new line into the index that is in neither the HEAD nor the
       working tree will stage the new line for commit, but the line will appear to be reverted in the
       working tree.

       Avoid using these constructs, or do so with extreme caution.

       removing untouched content
           Content which does not differ between the index and working tree may be shown on context lines,
           beginning with a " " (space). You can stage context lines for removal by converting the space to
           a "-". The resulting working tree file will appear to re-add the content.

       modifying existing content
           One can also modify context lines by staging them for removal (by converting " " to "-") and
           adding a "+" line with the new content. Similarly, one can modify "+" lines for existing
           additions or modifications. In all cases, the new modification will appear reverted in the
           working tree.

       new content
           You may also add new content that does not exist in the patch; simply add new lines, each
           starting with "+". The addition will appear reverted in the working tree.

       There are also several operations which should be avoided entirely, as they will make the patch
       impossible to apply:

          adding context (" ") or removal ("-") lines

          deleting context or removal lines

          modifying the contents of context or removal lines

       git-status(1) git-rm(1) git-reset(1) git-mv(1) git-commit(1) git-update-index(1)

       Part of the git(1) suite

Git 1.8.3                                        05/24/2013                                       GIT-ADD(1)

Reporting Problems

The way to report a problem with this manual page depends on the type of problem:

Content errors
Report errors in the content of this documentation with the feedback links below.
Bug reports
Report bugs in the functionality of the described tool or API through Bug Reporter.
Formatting problems
Report formatting mistakes in the online version of these pages with the feedback links below.