Get Wi-Fi Aware demo app working

Hello,

I have searched here on the forums for "WiFi Aware" and have read through just about every post. In a lot of them the person says they were able to get the example app https://developer.apple.com/documentation/wifiaware/building-peer-to-peer-apps working with their iOS devices. I, for some reason, am not able to get the example app to fully work.

I am able to build the app and load the app onto two physical iPhone 12 minis (both are running iOS 26.0.1). I follow the steps shown at the link share above but I get stuck because I can't get past the "enter this pin code to connect" step. I make one device be a host of a simulation and the other device the viewer of a simulation. On each device I tap the "+" button. On the viewer device I tap the discovered device. On the host device I then see the pin. I then enter the pin on the viewer device. After this step nothing happens. My only choice on the viewer device is to tap "cancel" and exit the "enter the pin step". If I go into the actual device settings (Settings -> Privacy & Security -> Paired Devices) I see that the devices are "paired" but the app doesn't seem to think so.

Are there some special settings I need to turn on for the app to work properly?

In an attempt to figure out what was going wrong I took the example app and paired it down to just send back simple messages based on user button taps.

These are my logs from when I start up the app and start one device as the hoster and one as the viewer.

	Selected Mode: Hoster
	Start NetworkListener
	[L1 ready, local endpoint: <NULL>, parameters: udp, traffic class: 700, interface: nan0, local: ::.0, definite, attribution: developer, server, port: 62182, path satisfied (Path is satisfied), interface: nan0[802.11], ipv4, uses wifi, LQM: unknown, service: com.example.apple-samplecode.Wi-FiAwareSample8B4DX93M9J._sat-simulation._udp scope:0 route:0 custom:107]: waiting(POSIXErrorCode(rawValue: 50): Network is down)
	[L1 ready, local endpoint: <NULL>, parameters: udp, traffic class: 700, interface: nan0, local: ::.0, definite, attribution: developer, server, port: 62182, path satisfied (Path is satisfied), interface: nan0[802.11], ipv4, uses wifi, LQM: unknown, service: com.example.apple-samplecode.Wi-FiAwareSample8B4DX93M9J._sat-simulation._udp scope:0 route:0 custom:107]: ready
	[L1 failed, local endpoint: <NULL>, parameters: udp, traffic class: 700, interface: nan0, local: ::.0, definite, attribution: developer, server, port: 62182, path satisfied (Path is satisfied), interface: nan0[802.11], ipv4, uses wifi, LQM: unknown, service: com.example.apple-samplecode.Wi-FiAwareSample8B4DX93M9J._sat-simulation._udp scope:0 route:0 custom:107]: failed(-11992: Wi-Fi Aware)
	nw_listener_cancel_block_invoke [L1] Listener is already cancelled, ignoring cancel
	nw_listener_cancel_block_invoke [L1] Listener is already cancelled, ignoring cancel
	nw_listener_cancel_block_invoke [L1] Listener is already cancelled, ignoring cancel
	Networking failed: -11992: Wi-Fi Aware
	Error acquiring assertion: <Error Domain=RBSAssertionErrorDomain Code=2 "Could not find attribute name in domain plist" UserInfo={NSLocalizedFailureReason=Could not find attribute name in domain plist}>
	<0x105e35400> Gesture: System gesture gate timed out.

	Selected Mode: Viewer
	Start NetworkBrowser
	[B1 <nw_browse_descriptor application_service _sat-simulation._udp bundle_id=com.example.apple-samplecode.Wi-FiAwareSample8B4DX93M9J device_types=7f device_scope=ff custom:109>, generic, interface: nan0, attribution: developer]: ready
	nw_browser_update_path_browser_locked Received browser Wi-Fi Aware
	nw_browser_cancel [B1] The browser has already been cancelled, ignoring nw_browser_cancel().
	[B1 <nw_browse_descriptor application_service _sat-simulation._udp bundle_id=com.example.apple-samplecode.Wi-FiAwareSample8B4DX93M9J device_types=7f device_scope=ff custom:109>, generic, interface: nan0, attribution: developer]: failed(-11992: Wi-Fi Aware)
	nw_browser_cancel [B1] The browser has already been cancelled, ignoring nw_browser_cancel().
	Networking failed: -11992: Wi-Fi Aware
	Error acquiring assertion: <Error Domain=RBSAssertionErrorDomain Code=2 "Could not find attribute name in domain plist" UserInfo={NSLocalizedFailureReason=Could not find attribute name in domain plist}>

This guy stands out to me Networking failed: -11992: Wi-Fi Aware but I can't find any info on what it means.

Thank you