[Engineering Request] iPad Pro M2 USB-PD Charging Regression in iPadOS 27 PB2 (FB24178289)

Hello Apple Engineering Team,

I'm submitting a detailed technical report regarding a USB-PD charging regression affecting the iPad Pro 12.9" (M2) in iPadOS 27 Public Beta 2. This appears to be a recurring firmware-level issue across multiple beta cycles.

TECHNICAL SPECIFICATION: • Device: iPad Pro 12.9" (A2766 / M2 SoC) • Storage Configuration: 512GB NAND • Current Build: iPadOS 27 PB2 (24A5390f) • Feedback ID: FB24178289

PHENOMENOLOGY:

  1. USB-C port fails to negotiate Power Delivery after beta installation
  2. Device draws minimal standby current (charging icon appears but doesn't stabilize)
  3. Flashing red battery icon persists through extended cold charging (>10 hours)
  4. Force restart does not clear the USB controller state
  5. Battery management subsystem appears functional but USB-PD handshake blocked

ISOLATION TESTING: • Hardware elimination: 16 USB-C ports across 7 chargers tested (UGREEN, Anker certified) • Cable verification: 60W and 100W USB-C cables confirmed working on companion devices • Cross-platform validation: iPhone 12 and iPhone 14 Plus on identical iOS 27 beta charge without issue • Network connectivity: WiFi/BT functional when device can boot (pre-brick state) • Conclusion: Fault localized to M2 power management firmware, not peripherals or general OS stack

RECURSION HISTORY: • iPadOS 18 Beta 2: Similar USB-C charging failures on M2 devices (public reports on r/iPadOS) • iPadOS 26 Beta 9: USB-C completely disabled for charging/connecting (Facebook iOS Beta community) • iPadOS 27 Public Beta 2: Recurrence of identical symptom set

POWER MANAGEMENT SUBSYSTEM ANALYSIS: The M2 architecture implements USB-C PD negotiation at the S0ix power state transition layer. The fact that minimal standby current flows but full PD handshakes fail suggests a firmware-state corruption in the power delivery controller that survives normal reboot sequences but may require full power-cycle or firmware rewrite to restore.

REQUESTED ACTION ITEMS:

  1. Firmware diagnostics on affected M2 power management subsystem
  2. DFU-mode USB controller reinitialization protocol verification
  3. Engineering acknowledgment of Feedback ID FB24178289
  4. Prioritized investigation of recurring M2 USB-PD regressions across beta cycles
  5. Interim recovery guidance for affected users pending permanent fix

USER IMPACT CONTEXT: This failure renders the device nonfunctional for users reliant on specific hardware configurations. In this case: religious observance apps requiring 512GB local storage + academic workload starting August 26. No alternative device available for equivalent functionality.

I am available for additional diagnostic cooperation or test build evaluation as needed.

Respectfully, Jason Bulnes Feedback ID: FB24178289

[Engineering Request] iPad Pro M2 USB-PD Charging Regression in iPadOS 27 PB2 (FB24178289)
 
 
Q