Apple Watch SE 3 fails to pair with Xcode Device Hub: protocol_shoes does not support endpoint type 3

Hi all,

I cannot pair a physical Apple Watch SE 3 with Xcode, and I would like to know if anyone else sees this or has found a workaround.

Environment

  • Apple Watch SE 3 (GPS, Watch7,13), watchOS 27.2.1 (24S132)
  • Companion iPhone 15 Plus, iOS 27.2 (24B119)
  • Tested on two different Macs: a MacBook Air (macOS 27.2.1, Xcode 27.2) and an iMac
  • Developer Mode is enabled on both the iPhone and the Watch
  • The iPhone is trusted, connects to the Mac, and appears in Device Hub

Problem
The Watch shows “Pair with <Mac name>” in its Developer Mode settings. When I tap it, pairing does not complete and the Watch does not appear in Device Hub.

Watch log (remotepairingdeviced). The sysdiagnose shows the pairing request failing within about 20 ms. Log prefixes and the endpoint address are omitted:

Received request to wirelessly pair from peer
Path is satisfied; interface: ipsec2; uses wifi, proxy
Endpoint type is not an address or host, cannot synthesize URL
protocol_shoes does not support endpoint type 3
Failed to attach application protocol shoes
Received pairing outcome failure (errorCode: -1, "An unknown error occurred.")

What I tried

  • Restarted the Watch, iPhone and Mac
  • Tested on two Macs and on different Wi-Fi networks
  • Turning Bluetooth off on the iPhone: the Watch then no longer discovers the Mac at all

The same failure appears in the Watch sysdiagnoses for all attempts. I filed a report in Feedback Assistant: FB25623613

Has anyone seen this error or found a workaround?

Thanks