After replacing Big Sur OSX 11.0 with the latest 11.5, my app's AXObserverAddNotification methods fails. Here is sample code I tested from StackOverflow: https://stackoverflow.com/questions/853833/how-can-my-app-detect-a-change-to-another-apps-window AXUIElementRef app = AXUIElementCreateApplication(82695); // the pid for front-running Xcode 12.5.1 CFTypeRef frontWindow = NULL; AXError err = AXUIElementCopyAttributeValue( app, kAXFocusedWindowAttribute, &frontWindow );     if ( err != kAXErrorSuccess ){         NSLog(@"failed with error: %i",err);     } NSLog(@"app: %@  frontWindow: %@",app,frontWindow); 'frontWindow' reference is never created and I get the error number -25204. It seems like the latest Big Sur 11.5 has revised the Accessibility API or perhaps there is some permission switch I am unaware of that would make things work. What am I doing wrong?

Looking to begin an accessibility vision app and I’m not having any luck locating properties or code that allows access to the display zoom. Has anyone worked with these areas before?

I’ve noticed that the VoiceOver reads currency amounts correctly when they are below thousand. Then, for higher amounts, for example 12.225,34 € VoiceOver reads ‘twelve point two two five thirty four euros’ If the amount is formatted without the thousand separator (12225,34 €) this problem doesn’t exist. (VO reads twelve thousand two hundred and twenty five euros and thirty four cents) Why is the thousand separator a problem for VoiceOver if this formatting is coming from the currency and locale? This issue exists in English. I changed my device language to Italian and German and in both cases the number was read correctly even with the separator. Is there a way to make it work in English?

accessibilityUserInputLabels is working fine with any view I tried this on. Meaning that the control can be toggled with the provided alternative names when using Voice Control. When setting this property on any UIBarButtonItem though, it seems Voice Control ignores the alternative names provided by setting accessibilityUserInputLabels. For comparison, accessibilityLabel works perfectly when set on UIBarButtonItem. Is anyone facing the same issue? Using Xcode 16.0 (16A242) on iOS 18

I am working on capturing 48MP images using the iPhone 16 Pro Max with the Ultra-wide camera. I’ve updated the code to capture the maximum supported dimensions with the following snippet: if #available(iOS 16.0, *) { photoOutput.maxPhotoDimensions = device.activeFormat.supportedMaxPhotoDimensions.last! photoSettings.maxPhotoDimensions = .init(width: 5712, height: 4284) } However, I’m still not getting the expected results. My goal is to capture 48MP images, and I want to confirm if the Ultra-wide camera supports this resolution or if I’m missing any other configuration. Any guidance would be appreciated!

When my app is in the background, I create a Live Activity through a push notification with token get from pushToStartTokenUpdates, and this process works fine. However, without opening the app, how can I retrieve the new push token for this Live Activity again and use it for subsequent updates to the Live Activity content?

I am getting this issue when trying to accept an invite to a new test version of our app. ****Unable to Accept invite This invitation cannot be accepted because your Apple Account, xxxxxxxx.me.com, has already been associated to this app.**** Can you help please?

Hello, I have the following problem. I’m developing a NoCode app using the FlutterFlow platform and have been working on it for over a year. This time, after publishing a new version of the app through FlutterFlow, I tried logging into Apple Store Connect, but I got an error saying that I had made too many login attempts and needed to try again later. However, I hadn’t attempted to log in before that at all. No matter how long I wait—24 hours, 48 hours—the same error keeps appearing, meaning I still can’t access my account. Apple Support hasn’t responded for 4 days, and in total, I’ve been locked out of my account for over 9 days. Please help me understand what might be causing this issue. Apple Store Connect refuses to send me an SMS with the login code.

Hi all, I’ve got a usability question about accessibility navigation. My app has a lot of carousels (horizontally scrolling lists of content with far more elements than can fit on the screen). Often, these are just images, but sometimes, they’re cards with multiple subelements. In our previous implementation, each card was a single accessibility element, and we exposed the subelements as accessibility custom actions. Despite this, users frequently mentioned navigating with VoiceOver as a pain point. It takes a long time to navigate through and navigate past these carousels. To solve this, I converted my carousels into a single adjustable element, so users can navigate through it with one swipe, and they can still access the elements by adjusting the values up and down. I got this advice from this 2018 WWDC talk. Is this still the recommended advice? Or is there a new, preferred way to do this? Additionally, I had to get a little creative with the second carousel, the one with multiple subelements. Some of these were interactive (imagine a card with a description, an upvote button, and a downvote button). Adjustable elements override the accessibility custom actions VoiceOver gesture, so I can’t expose the individual buttons as actions. Instead, I made each subelement in each card in the carousel one of the adjustable values. Swiping up would go from description 1 to upvote button 1 to downvote button 1 to description 2, etc. Double tapping with VoiceOver would perform whatever action the carousel is currently on. So if I adjust the value to the element at index 2 (say, downvote 1), double tapping would trigger the downvote button’s action. Does this make sense? Is there a better way to do this? This seemed to be the best compromise between screenreader navigation speed, exposing all actions, and the existing UI.

In the app I'm working on, I have a SwiftUI View embedded in a UIKit Storyboard. The SwiftUI View holds a menu with a list of payment tools, and the ForEach loop looks like this: ForEach(self.paymentToolsVM.paymentToolsItems, id: \.self) { paymentTool in Button { navigationCallback(paymentTool.segueID) } label: { PaymentToolsRow(paymentToolName: paymentTool.title, imageName: paymentTool.imageName) .accessibilityElement() .accessibilityIdentifier("Billing_\(paymentTool.title.replacingOccurrences(of: " ", with: ""))") } if paymentTool != self.paymentToolsVM.paymentToolsItems.last { Divider() } } So you can see the accessibility ID is there, and it shows up properly when I open up Accessibility Inspector with the simulator, but the testing script isn't picking up on it, and it doesn't show up when the view is inspected in Appium. I have other SwiftUI views embedded in the UIKit view, and the script picks up the buttons on those, so I'm not sure what's different about this one. If it helps, the script is written in Java with the BDD framework. I can try to get the relevant part of the script if anyone thinks that would be helpful. Otherwise, is there anything else I can try?

I have more than 1000 notes classified in parent/child folders up to 5 levels. From the 5th level of files I can no longer share the note. The note is not shared. It is that of the parent file that is shared. Thank you very much Good to you Christophe

I’m requesting access to the Family Controls API for an iOS app currently in development. I’ve submitted the request through the official form here: https://developer.apple.com/contact/request/family-controls-distribution However, after submitting, I receive no confirmation email or support ticket ID. The page only shows a “Thank you for requesting the API” message, and I’m left without a way to track or confirm the request. This entitlement is essential for my app’s functionality, and I need to move forward with development and testing. Can someone from the Apple team please confirm receipt of the request and provide guidance on the next steps or estimated timelines?

I'm developing a document editor for macOS using AppKit, which supports structured content such as titles and multiple heading levels—similar to what you see in the Pages app. I'm looking for a way to programmatically mark a specific substring within an NSTextView as a heading, so that VoiceOver can recognize it and announce it appropriately (e.g., by saying “heading” before reading the text). This would be similar in spirit to how NSAccessibilityLinkTextAttribute works for links. Is there an existing accessibility text attribute or recommended approach to achieve this behavior for headings? If not, I’d appreciate any guidance or suggestions on how best to implement this in a VoiceOver-friendly way. Thank you in advance for your help! Best regards,

I have screen in my app that can represented by following layout, I would like this screen to be possible to navigate with full keyboard access but there is unexpected behavior: Path: Tap "Tab" on keyboard -> whole scrollview is targeted and inside the first button1 is selected. Arrow down -> selection changes to button3 Arrow up -> selection changes back to button1 So button2 is always skipped, there is no way to navigate to it by arrows left/right. Using Tab+F and searching "button2", button2 is correctly selected, so it's selectable but for some reason not findable by going through elements. Putting empty text in Text views cause buttons to be vertically aligned and then everything works correctly but it is not an option. public struct BugReportView: View { public var body: some View { ScrollView { VStack(spacing: .zero) { Button("button1", action: { }) HStack { Text("some text") Text("some text2") Button("button2", action: { }) } Button("button3", action: { }) } } } }

As part of apple pay implementation we are trying to create a merchant session by trying to connect to apple endpoint https://apple-pay-gateway-cert.apple.com/paymentservices/startSession. While trying to do so we are facing an error “An error occurred while sending the request. The request was aborted: Could not create SSL/TLS secure channel.” . I call the validation url by passing to a C# .Net Framework 4.8 Web API. The API setups an HttpClient with the Merchant Identity Validation Certificate found in my apple account and calls the validation url passing in the required Json Validation Object. When I call PostAsync() I get an exception with the above error message Code is working successfully on my local machine but facing this issue while deployed on Dev / Model environment for testing. We have used Azure app service for deployment and TLS version 1.2 already present here. We have used the Merchant Identity certificate that was issued and have also checked with networking and infrastructure team to make its not an issue from our side. Does anyone have any other idea what could be causing this error. Thank you, Supriya

When I try to get the frames of a AXUIElementRef using AXUIElementCopyAttributeValue(element, (CFStringRef)attribute, &result) the frames are shifted and rotated on the iOS simulator. I get the same frames when using the Accessibility Inspector when the Max is selected as the host. When I switch the host to the iOS simulator the frames are correct. How is the Accessibility Inspector getting the correct frames? And how can I do the same in my app?

Added a view controller in the storyboard, added a tableview in this view, and added a cell under the table, when I run the APP to jump to the page, when using the narration function, I find that when I use three fingers to swipe up or down, a sentence will be broadcast in English, I want to no longer change the accessiblity of the cell, when I perform the behavior of swiping up or down with three fingers, Broadcast how Chinese should be implemented.

Even though navigationBarBackButtonHidden is set, the back button appears when you swipe slightly.

Hi! I'm working on an application where I'd like VoiceOver to give each element of a tab bar the "Tab" trait. I'm testing this using the Accessibility Inspector. Essentially, I'd like to replicate the behavior of how Safari identifies each of its tabs as a "Tab" (I've attached a photo below). How exactly is this accomplished? I've tried using the .isTabBar trait to designate the child objects as "Tabs", but this doesn't seem to be working and I've struggled to find documentation about this. For additional context, these child items are Buttons, and I would like to have the .isButton trait essentially replaced by something like an .isTab trait. Not sure if this is actually possible or not, but curious how the Accessibility Inspector recognizes this in Safari.

Hello everyone, I’d like to report an issue I’ve encountered when using a Bluetooth mouse together with AssistiveTouch on iPhone running iOS 16.5. This has also been reported via Feedback Assistant with Feedback ID: FB17806167 Description: When using a Bluetooth mouse together with AssistiveTouch on iPhone (iOS), the pointer behaves incorrectly in landscape orientation. Specifically: The pointer cannot move past the center of the screen Horizontal and vertical (X/Y) movements appear to be swapped or misaligned Natural movement of the pointer is not possible It seems as if the internal coordinate mapping remains locked in portrait orientation, even when the device is physically rotated to landscape. This issue occurs system-wide, regardless of the current app. It is observable in Settings, on the Home screen, and in third-party apps. Steps to Reproduce: Enable AssistiveTouch Connect a Bluetooth mouse to the iPhone Rotate the device to landscape orientation Try moving the mouse pointer across the screen → Notice that: Pointer cannot move past the center Horizontal/vertical input is interpreted incorrectly (as if still in portrait) Expected Behavior: The mouse pointer should move across the entire screen correctly, regardless of device orientation. Actual Behavior: In landscape orientation, the pointer is either restricted to part of the screen or misaligned. It behaves as if the device is still in portrait. Horizontal mouse movement causes vertical pointer movement, and vice versa User experience feels broken and unintuitive Feature Suggestion: Please improve the synchronization between physical device orientation and AssistiveTouch pointer mapping on iOS. I also suggest exposing AssistiveTouch orientation control via a public API, so developers can help maintain consistent pointer behavior. Thanks in advance for any insights or suggestions. Best regards, Jannis