So I've been trying out GPTK with Elite Dangerous Horizons game and it looks like from what I can tell. The VRAM keeps going up until it goes over the limit where it drops the FPS to 1-3 FPS and then crashes the game. From the Performance HUD I can see that it looks like when using GPTK, the VRAM usage just keeps climbing and I never saw it drop down at all. I did some limited testing, and from that I think I can conclude that it is probably not a VRAM leak, but it might be caching it. The reason for this is because I noticed that if I went back to the area that I've been before. It won't increase the VRAM usage. So either there is something wrong with the freeing VRAM memory part, or it could be that GPTK might not be reporting the right amount of VRAM available to use? So maybe that's why it keeps allocating VRAM until it went out of memory and crashed the game. Just to test, I did try running the game with DXVK+MoltenVK combo, and I can see that it works just fine. VRAM is being freed up when it's no longer used. Is this a known issue in some games?

Hello! I'm currently porting a videogame console emulator to iOS and I'm trying to make the renderer (tested on MacOS) work on iOS as well. The emulator core is written in C++ and uses metal-cpp for rendering, whereas the iOS frontend is written in Swift with SwiftUI. I have an Objective-C++ bridging header for bridging the Swift and C++ sides. On the Swift side, I create an MTKView. Inside the MTKView delegate, I run the emulator for 1 video frame and pass it the view's backing layer for it to render the final output image with. The emulator runs and returns, but when it returns I get a crash in Swift land (callstack attached below), inside objc_release, which indicates I'm doing something wrong with memory management. My bridging interface (ios_driver.h): #pragma once #include <Foundation/Foundation.h> #include <QuartzCore/QuartzCore.h> void iosCreateEmulator(); void iosRunFrame(CAMetalLayer* layer); Bridge implementation (ios_driver.mm): #import <Foundation/Foundation.h> extern "C" { #include "ios_driver.h" } <...> #define IOS_EXPORT extern "C" __attribute__((visibility("default"))) std::unique_ptr<Emulator> emulator = nullptr; IOS_EXPORT void iosCreateEmulator() { ... } // Runs 1 video frame of the emulator and IOS_EXPORT void iosRunFrame(CAMetalLayer* layer) { void* layerBridged = (__bridge void*)layer; // Pass the CAMetalLayer to the emulator emulator->getRenderer()->setMTKLayer(layerBridged); // Runs the emulator for 1 frame and renders the output image using our layer emulator->runFrame(); } My MTKView delegate: class Renderer: NSObject, MTKViewDelegate { var parent: ContentView var device: MTLDevice! init(_ parent: ContentView) { self.parent = parent if let device = MTLCreateSystemDefaultDevice() { self.device = device } super.init() } func mtkView(_ view: MTKView, drawableSizeWillChange size: CGSize) {} func draw(in view: MTKView) { var metalLayer = view.layer as! CAMetalLayer // Run the emulator for 1 frame & display the output image iosRunFrame(metalLayer) } } Finally, the emulator's render function that interacts with the layer: void RendererMTL::setMTKLayer(void* layer) { metalLayer = (CA::MetalLayer*)layer; } void RendererMTL::display() { CA::MetalDrawable* drawable = metalLayer->nextDrawable(); if (!drawable) { return; } MTL::Texture* texture = drawable->texture(); <rest of rendering follows here using the drawable & its texture> } This is the Swift callstack at the time of the crash: To my understanding, I shouldn't be violating ARC rules as my bridging header uses CAMetalLayer* instead of void* and Swift will automatically account for ARC when passing CoreFoundation objects to Objective-C. However I don't have any other idea as to what might be causing this. I've been trying to debug this code for a couple of days without much success. If you need more info, the emulator code is also on Github Metal renderer: https://github.com/wheremyfoodat/Panda3DS/blob/ios/src/core/renderer_mtl/renderer_mtl.cpp#L58-L68 Bridge implementation: https://github.com/wheremyfoodat/Panda3DS/blob/ios/src/ios_driver.mm Bridging header: https://github.com/wheremyfoodat/Panda3DS/blob/ios/include/ios_driver.h Any help is more than appreciated. Thank you for your time in advance.

I notice some metal-cpp classes have static funtion like static URL* fileURLWithPath(const class String* pPath); static class ComputePassDescriptor* computePassDescriptor(); static class AccelerationStructurePassDescriptor* accelerationStructurePassDescriptor(); which return a new object. these classes also provide 'alloc' and 'init' function to create object by default. for object created by 'alloc' and 'init', I use something like NS::Shaderd_Ptr or call release directly to free memory. Because 'alloc' and 'init' not explicit call on these static function. I wonder how to correctly free object created by these static function? did they managed by autorelease pool?

After following the instructions here: https://developer.apple.com/metal/cpp/ I attempted building my project and Xcode presented several errors. In essence it's complaining about some redeclarations in the Metal-CPP headers. NSBundle.hpp and NSError.hpp are included in the metal-cpp/foundation directory from the metal-cpp download. Any help in getting these issues resolved is appreciated. Thanks!

I am trying to learn Metal development on my MacBook Pro M1 Pro (Sequoia 15.3.1) on Xcode Playground, but when I write these two lines of code: import Metal let device = MTLCreateSystemDefaultDevice()! I get the error The LLDB RPC server has crashed. Any ideas as to what I can do to solve this? I have rebooted the machine and reinstalled Xcode...

Hey all! I'm got my hands on a refurbished mac mini m1 and already diving into metal. At the moment, i'm currently studying graphics programming with opengl and got to a point where I can almost create a 3d cube. However, I noticed there aren't many tutorials for metal cpp but rather demos. One thing I love about graphic programming, is skinning/skeletal animation. At the moment, I can't find any sources or tutorials on how to load skeletal animations into metal-cpp. So, if I create my character in blender and had all types of animations all loaded into a .FBX or maybe .DAE and load this into metal api with metal-cpp, how can I go on about how this works?

*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[NSBundle allFrameworks]: unrecognized selector sent to instance NS::Bundle* Bundle = NS::Bundle::mainBundle(); Bundle->allFrameworks(); call to allFrameworks() and allBundles() will throw exception, but other functions work well.

My app is running Compute Shaders that use non-uniform thread groups. When I run the app in the debugger with a simulator target the app crashes on encoder.dispatchThreads and the error message is: Dispatch Threads with Non-Uniform Threadgroup Size is not supported on this device. Previously the log output states that: Metal Shader Validation is unsupported for Simulator. However: When I stop the debugger and just run the app in the simulator without the debugger attached, the app just runs fine and does not crash. The SwiftUI Preview that also triggers the Compute Shader when preparing data also just runs fine without a crash. I can run and debug on a real device no problem - I just don't have all sizes available. Is there anything I need to check in my lldb/simulator configuration? It obviously does work, just the debugger cannot really deal with it? Any input would be nice as this really slows my down as I have to be extremely careful when debugging on the simulator.

Hello ladies and gentlemen, I'm writing a simple renderer on the main actor using Metal and Swift 6. I am at the stage now where I want to create a render pipeline state using asynchronous API: @MainActor class Renderer { let opaqueMeshRPS: MTLRenderPipelineState init(/*...*/) async throws { let descriptor = MTLRenderPipelineDescriptor() // ... opaqueMeshRPS = try await device.makeRenderPipelineState(descriptor: descriptor) } } I get a compilation error if try to use the asynchronous version of the makeRenderPipelineState method: Non-sendable type 'any MTLRenderPipelineState' returned by implicitly asynchronous call to nonisolated function cannot cross actor boundary Which is understandable, since MTLRenderPipelineState is not Sendable. But it looks like no matter where or how I try to access this method, I just can't do it - you have this API, but you can't use it, you can only use the synchronous versions. Am I missing something or is Metal just not usable with Swift 6 right now?

Hi, Apple’s documentation on Order-Independent Transparency (OIT) describes an approach using image blocks, where an array of size 4 is allocated per fragment to store depth and color in a tile shading compute pass. However, when increasing the scene’s depth complexity by adding more overlapping quads, the OIT implementation fails due to the fixed array size. Is there a way to dynamically allocate storage for fragments based on actual depth complexity encountered during rasterization, rather than using a fixed-size array? Specifically, can an adaptive array of fragments be maintained and sorted by depth, where the size grows as needed instead of being limited to 4 entries? Any insights or alternative approaches would be greatly appreciated. Thank you!

I used xcode gpu capture to profile render pipeline's bandwidth of my game.Then i found depth buffer and stencil buffer use the same buffer whitch it's format is Depth32Float_Stencil8. But why in a single pass of pipeline, this buffer was loaded twice, and the Load Attachment Size of Encoder Statistics was double. Is there any bug with xcode gpu capture?Or the pass really loaded the buffer twice times?

Our app uses Metal for image processing. We have found that if our app (and its possible intensive image processing) is started quickly after user is logged in, then calls to Metal may be hanging/stuck for a good while. Example: it can take 1-2 minutes for something that usually takes 3-5 seconds! Metal threads are just hanging in a memmove... In Activity Monitor we see a lot of things are happening right after log-in. But why Metal calls are blocking for so long is unknown to us... The workaround is to wait a minute before we start our app and start intensive image processing using Metal. But hard to explain this workaround to end-users... It doesn't happen on all computers but fairly easy to reproduce on some computers. We are using macOS 15.3.1. M1/M3 Max. Any good ideas for how to proceed with this problem and possible reach out to Apple engineers? Thanks! :)

Hey everyone, I’m trying to run Kingdom Come: Deliverance 2 using the Game Porting Toolkit, but I’m encountering a black screen when launching the game. From what I know about the game’s requirements, it might be using Shader Model 6.5, which supports advanced features like DirectX Raytracing (DXR) Tier 1.1. This leads me to suspect that the issue could be related to missing support for DirectX 12.1 Features or Shader Model 6.5 in GPTK. Does anyone know if these features are currently supported by GPTK? If not, are there any plans to implement them in future updates? Alternatively, is there any workaround for games that rely on Shader Model 6.5 and ray tracing? Thanks a lot for your help!

When inspecting the geometry in Xcode's metal debugger, I noticed that the shown "frustrum box" didn't make sense. Since Metal uses depth range 0,1 in NDC space, I would expect a vertex that is projected to z:0 to be on the front clipping plane of the frustrum shown in the geometry inspector. This is however not the case. A vertex with ndc z:0 is shown halfway inside the frustrum. Vertices with ndc z less than 0 are correctly culled during rendering, while the geometry inspector's frustrum shows that the vertex is stil inside the frustrum. The image shows vertices that are visually in the middle of the frustrum on z axis, but at the same time the out position shows that they are projected to z:0. How is this possible, unless there's a bug in the geometry inspector?

Hello! I need to "draw" a set of particles into the texture. It would be trivial in render encoder of course. However, I would like to implement the task in compute kernel. Every particle draw operation is expected to set 5 texels - "center" one and left/right/upper/lower. Particles can and will overlap, so concurrent draws are to be expected. I tried using texture atomics - atomic_store() to be more precise. This worked, albeit pretty slowly - too slow for my purpose. Just to test what would happen, I tried using normal texture write(). I was expecting to see some kind of visual artefacts, but to my surprise, it worked very well (and much faster). My question: is it safe? I understand that calling write() doesn't guarantee any ordering of the operations, so if multiple threads write to the same texel, the final value may come from any of those threads. But suppose all the threads were to write the very same color? Can I assume that the texel in question will have said color after the compute kernel finishes? I am using M2 Pro MacBook, but ideally I would love to get the answer for the all Apple Silicon devices. My texture format is R32Int (so as to be able to use atomics), but I could do with any single-channel format, the purpose of the texture is to be binary mask of sorts. Thanks!

I am interested in learning the Metal framework for rendering development. However, most of Apple’s official documentation uses Objective-C code. Therefore, I am seeking guidance on whether it is more advantageous for me to focus solely on learning Swift to gain proficiency in Metal.

I have a bare-bones Metal app setup where I attach a CAMetalLayer to a window that inherits from a NSWindow with a custom delegate. Everything else is vanilla. I'm also using metal-cpp and metal shader converter. I'm running into a issue where the application runs fine in the beginning, but once I resize the window, it starts hitching. It turns out that [CAMetalLayer nextDrawable:] frequently (but not always) takes around a full second (plus or minus a few milliseconds) to return once drawableSize has been updated. I've tried setting allowsNextDrawableTimeout to false which doesn't work; it returns a valid drawable after a second instead of nil. Setting displaySyncEnabled to false reduces the likelihood of this happening to around 50% from 90%+ but does not eliminate it. Setting maximumDrawableCount to 2 or 3 does not seem to make a difference. By dumping the resource IDs of the returned textures I've noticed something interesting: Before resizing, the layer seems to shuffle between 2 textures or at least 2 resource IDs, but after resizing it starts to create new textures for each returned drawable. Occasionally it seems to reuse a previous resource ID, but it does not seem to have anything to do with whether the method returns quickly or not. Why does this happen, and how can I fix it? Should I create a new CAMetalLayer when resizing the window instead of updating drawableSize?

I am working on a custom resolve tile shader for a client. I see a big difference in performance depending on where we write to: 1- the resolve texture of the color attachment 2- a rw tile shader texture set via [renderEncoder setTileTexture: myResolvedTexture] Option 2 is more than twice as slow than option 1. Our compute shader writes to 4 UAVs so just using the resolve texture entry is not possible. Why such a difference as there is no more data being written? Can option 2 be as fast as option 1? I can demonstrate the issue in a modified version of the Multisample code sample.

I am trying to load some PNG data with MTKTextureLoader newTextureWithData，but the result shows wrong at the alpha area. Here is the code. I have an image URL, after it downloads successfully, I try to use the data or UIImagePNGRepresentation (image), they all show wrong. UIImage *tempImg = [UIImage imageWithData:data]; CGImageRef cgRef = tempImg.CGImage; MTKTextureLoader *loader = [[MTKTextureLoader alloc] initWithDevice:device]; id<MTLTexture> temp1 = [loader newTextureWithData:data options:@{MTKTextureLoaderOptionSRGB: @(NO), MTKTextureLoaderOptionTextureUsage: @(MTLTextureUsageShaderRead), MTKTextureLoaderOptionTextureCPUCacheMode: @(MTLCPUCacheModeWriteCombined)} error:nil]; NSData *tempData = UIImagePNGRepresentation(tempImg); id<MTLTexture> temp2 = [loader newTextureWithData:tempData options:@{MTKTextureLoaderOptionSRGB: @(NO), MTKTextureLoaderOptionTextureUsage: @(MTLTextureUsageShaderRead), MTKTextureLoaderOptionTextureCPUCacheMode: @(MTLCPUCacheModeWriteCombined)} error:nil]; id<MTLTexture> temp3 = [loader newTextureWithCGImage:cgRef options:@{MTKTextureLoaderOptionSRGB: @(NO), MTKTextureLoaderOptionTextureUsage: @(MTLTextureUsageShaderRead), MTKTextureLoaderOptionTextureCPUCacheMode: @(MTLCPUCacheModeWriteCombined)} error:nil]; }] resume];

I am making a framework in C++ using metal-cpp, basically a small game engine. I am also consequently using metal-cpp-extensions provided in LearnMetalCPP to make applications work. For one of my classes, I needed to add AppKit.hpp inside a public header file, so I moved it and its associate headers(NSApplication.hpp, NSMenu.hpp, etc.) from Project headers to Public in Build Phases' Headers, however, it started giving me the error "cast of C pointer type 'void *' to Objective-C pointer type 'Class' requires a bridged cast" at several points in the AppKit headers. They don't appear when AppKit and its associates are in the Project headers, or when they are in the Private headers and no headers import it. I imagined that disabling Objective-C ARC and Using __bridge casts outside of ARC in Build Settings would solve it, but it didn't budge. I imagined it wouldn't involve actively changing the headers would be the answer, but even if I try to put __bridge before the problematic casts, it didn't recognize __bridge. How do I solve this? And why is it only happening in Public and not Project headers?