Good afternoon, I am working on a workout tracking app. So far everything is working as expected. However, I note that when my workout saves and is visible within the Fitness App, the workout duration is displayed rather than the kCal burned. What changes are required to be made in order for this to display the kCal in the list of workouts in Fitness rather than duration? For reference https://developer.apple.com/videos/play/wwdc2021/10009 this was my reference source for workout functionality.

Hi everyone, I’m developing a health-related mobile app and considering using EAS Update to deliver over-the-air (OTA) updates for JavaScript code and assets. Before implementing this, I want to ensure that this approach complies with Apple App Store policies, especially given the sensitivity of health-related apps. Here are my concerns: Does using EAS Update (OTA) align with Apple’s guidelines regarding app updates and dynamic behavior changes? Are there specific rules or restrictions for health apps using OTA updates that I should be cautious of? Could this approach be flagged as violating Apple’s policies on app integrity, especially those requiring updates to go through the App Store review process? I’d greatly appreciate any insights, advice, or references to Apple’s official documentation regarding OTA updates for apps distributed through the App Store. Thanks in advance for your help!

We currently use the HKCategoryValueMenstrualFlow enum to determine the type of menstrual flow: light, medium, etc. a user is having. We also use this enum in determining if it's an actual period day. The Problem I see HKCategoryValueMenstrualFlow was recently deprecated but has not been replaced by another data type. Are there plans to replace/update it with another data type? When or at what point in the future will this deprecation cause a problem in my code?

We have working code to fetch step data from HealthKit after requesting the necessary permissions. However, we’ve encountered an issue specific to one device, the iPhone 16 Pro Max. When querying the data, we do not receive a response, and the code enters an infinite loading state without completing the request. The user who is facing this issue has tried logging in on another device, and it works fine. On the problematic device (iPhone 16 Pro Max), the request does not complete. For reference, I’ve included the code below. Resolving this issue is crucial, so we would appreciate any guidance on what steps we can take to troubleshoot or resolve the problem on this specific device. Please note that the device has granted permission to access HealthKit data. static let healthStore = HKHealthStore() static func limitReadFromHealthKitBetweenDates(fromDate: Date, toDate: Date = Date(), completion: @escaping ([HKStatistics]) -> Void) { guard let stepsQuantityType = HKQuantityType.quantityType(forIdentifier: .stepCount) else { return } let ignoreUserEntered = HKQuery.predicateForObjects(withMetadataKey: HKMetadataKeyWasUserEntered, operatorType: .notEqualTo, value: true) let now = toDate var interval = DateComponents() interval.day = 1 var calendar = Calendar.current calendar.locale = Locale(identifier: "en_US_POSIX") var anchorComponents = calendar.dateComponents([.day, .month, .year], from: now) anchorComponents.hour = 0 let anchorDate = calendar.date(from: anchorComponents) ?? Date() let query = HKStatisticsCollectionQuery(quantityType: stepsQuantityType, quantitySamplePredicate: ignoreUserEntered, options: [.cumulativeSum], anchorDate: anchorDate, intervalComponents: interval) query.initialResultsHandler = { _, results, error in guard let results = results else { print("Error returned from resultHandler: \(String(describing: error?.localizedDescription))") return } print(results) var statisticsArray: [HKStatistics] = [] results.enumerateStatistics(from: fromDate, to: now) { statistics, _ in statisticsArray.append(statistics) if statistics.endDate.getddmmyyyyslashGMT == now.getddmmyyyyslashGMT { completion(statisticsArray) } } } healthStore.execute(query) } Please note that the code works on all devices except the problematic one. Could you please guide me on the next steps to resolve this issue?

For a given date, there are discrepancies between the step counts obtained from HealthKit and those displayed in the Health app. Is it possible for such discrepancies to occur even if step counts are not manually entered and multiple devices are not being used?

We are seeing an issue where sending data using the asynchronous method HKWorkoutSession.sendToRemoteWorkoutSession(data: Data) will never return in some cases (no success nor failure). This issue is happening for roughly 5% of Workouts started and will stay broken for the whole workout. The other 95% of the workouts, the connection works flawlessly. This happens on both watchOS 10 and 11, and with phones running iOS 17 or 18. The issue is quite random and not reproducible. Our app has thousands of workouts a day that use the workout session workout data send, with constant messages being send every few seconds. In some of those 5% cases the "sendToRemoteWorkoutSession" will throw way later, like 30+ minutes later, if the watch app is awake long enough to capture a log of a failure. Our code uses the same flow as in the sample project: https://developer.apple.com/documentation/healthkit/workouts_and_activity_rings/building_a_multidevice_workout_app Here is some sample code, which is pretty simple. Setup code: let workoutSession = try HKWorkoutSession(healthStore: healthStore, configuration: configuration) workoutSession.delegate = self activeWorkoutSession?.startMirroringToCompanionDevice { success, error in print("Mirroring started on companion device: \(success), error: \(error)") } workoutSession?.prepare() then later we send data using the workout session: do { print("Will send data") try await workoutSession.sendToRemoteWorkoutSession(data: data) print("Successfully sent data") // This nor the error may be called after waiting extensive amounts of time } catch { print("Failed to send data, error: \(error)") // This nor the success may be called after waiting extensive amounts of time } So far, the only fix is to restart the phone and watch at the same time, which is not a great user experience. Is anyone else seeing this issue? or know how to fix this issue?

I have FB12696743 open since July 21, 2023 and this happened again today. I get home at approx 10 mins after the hour, walk appox 50 ft across my yard, up 5 steps into my house, let the dog out and pace on my deck watching the dog, go back in the house walk around the kitchen while preparing dinner. A total of about 200 ft. I sit down about 35 past the hour and start to eat and at 10 mins to the next our and I get the reminder to stand. On the other side I wake up at 5 mins to hour. Walk 8 steps to the bathroom and successfully achieve the stand for that hour. WHY!?!?!? 😁🤣

I'm trying to hook into the new workoutEffort score supported in iOS 18, I am collecting this information from users when they submit their workout and trying to add a sample to the HKWorkout in the same manner as I've been adding other samples like bodyweight, calories burned, etc. I'm receiving the error: HKWorkout: Sample of type HKQuantityTypeIdentifierWorkoutEffortScore must be related to a workout I tried adding the samples using HKWorkoutBuilder.add([samples]) as which has been working perfectly for calories burned & bodyweight, but I am receiving the above error for workoutEffortScore As a second approach, I tried adding the sample after I called finishWorkout on the HKWorkoutBuilder and received back the HKWorkout object using HKHealthStore.add([samples], to: HKWorkout) and am still receiving the same error! I don't know otherwise how to relate a sample to a workout, I thought those were the APIs to do so? I'm using Xcode 16.0 RC (16A242) and testing on an iOS 16 Pro simulator

Hi! I am using the HKAnchoredObjectQuery to first get a snapshot of the initial results, and then trigger an updateHandler. I need to handle the initial results and the updates separately, which is why I implemented two completions. When I test the code, it works for a while. New and deleted samples trigger the updateHandler. However, after a while there appears an error: [connection] nw_read_request_report [C2] Receive failed with error "Software caused connection abort" Followingly, the updateHandler will stop getting triggered when I add updates in Apple health. Anyone have experience with this? func getMostRecentSample(for sampleType: HKSampleType, anchorKey: String, completion: @escaping (HKQuantitySample?, Error?) -> Swift.Void, updateHandler: @escaping (HKQuantitySample, Error?) -> Swift.Void) {     // If it is the first initialization, anchor is passed as nil     var anchor: HKQueryAnchor? = nil // Check for previous saved anchor in userdefaults     if UserDefaults.standard.object(forKey: anchorKey) != nil {       let data = UserDefaults.standard.object(forKey: anchorKey) as! Data       do {         guard let newAnchor = try NSKeyedUnarchiver.unarchivedObject(ofClass: HKQueryAnchor.self, from: data) else {           print("Could not parse anchor to HKQueryAnchor type")           return         }         anchor = newAnchor       } catch {         print("Error retreiving anchor from UserDefaults")       }     }     let query = HKAnchoredObjectQuery(type: sampleType,                      predicate: nil,                      anchor: anchor,                      limit: HKObjectQueryNoLimit                       ) { (query, samplesOrNil, _, newAnchor, errorOrNil) in       guard let samples = samplesOrNil as? [HKQuantitySample] else {         fatalError("*** An error occurred during the initial query: \(errorOrNil!.localizedDescription) ***")       }       if let anchor = newAnchor {         do {           let data = try NSKeyedArchiver.archivedData(withRootObject: anchor as Any, requiringSecureCoding: false)           UserDefaults.standard.set(data, forKey: anchorKey)         } catch {           print("Error retreiving anchor from UserDefaults")         }       }       completion(samples.last, nil)     }           // Setting up long-running query     query.updateHandler = { (query, samplesOrNil, _, newAnchor, errorOrNil) in       guard let samples = samplesOrNil as? [HKQuantitySample] else {         fatalError("*** An error occurred during an update: \(errorOrNil!.localizedDescription) ***")       }       if let anchor = newAnchor {         do {           let data = try NSKeyedArchiver.archivedData(withRootObject: anchor as Any, requiringSecureCoding: false)           UserDefaults.standard.set(data, forKey: anchorKey)         } catch {           print("Error retreiving anchor from UserDefaults")         }       }       if let sample = samples.last {         updateHandler(sample, nil)       }     }     self.healthStore.execute(query)   }