New to iOS development and I've been trying to make heads or tails of the documentation. I know there is a difference between the data fields returned from songs from the user library and from the category, but whenever I search on the apple site I can't find a list of each. For example, Im trying to get the releaseDate of a song in my library, but it seems I'll have to cross-query either the catalog entry for the using song.catalogID or the song.irsc but when I try to use them I can't find a cross reference between the two. I'm totally turned around. Also trying to determine if a song in my library has been favorited or not? isFavorited (or something similar) doesn't seem to be a thing. Using this code and trying to find a way to display a solid star if the song has been favorited or an empty one if it's not. Seems like a basic request but I can't find anything on how to do it. I've searched docs, googled, tried. Does apple want us to query the user's Favorited Songs playlist or something? How do I know which playlist that is? I know isFavorited isn't a thing, just using it here so you can see what my intension is: HStack(spacing: 10) { Image(systemName: song.isFavorited ? "star.fill" : "star") .foregroundColor(song.isFavorited ? .yellow : .gray) Image(systemName: "magnifyingglass") }

The AVB AVnu MILAN Convention has a groweing Population. Many big companies (Cisco, Meyer Sound, d&b Audio, l‘acoustics, Presonus, digico etc.) implements the AVB AVnu Milan Standards. Is there a plan on the Apple side to also implement AVnu Milan on top of the AVB Protocol? The advantage for Apple Sound would be a great Integration in the professionell Audio market and a more stable intergration on top of the AVB protocol. The atdecc work, but Not that stable.

I'm using a 4 channel USB Audio interface, with 4 microphones, and want to process them through 4 independent effect chains. However the output from AVAudioInputNode is a single 4 channel bus. How can I split this into 4 mono busses? The following code splits the input into 4 copies, and routes them through the effects, but each bus contains all four channels. How can I remap the channels to remove the unwanted channels from the bus? I tried using channelMap on the mixer node but that had no effect. I'm currently using this code primarily on iOS but it should be portable between iOS and MacOS. It would be possible to do this through a Matrix Mixer Node, but that seems completely overkill, for such a basic operation. I'm already using a Matrix Mixer to combine the inputs, and it's not well supported in AVAudioEngine. AVAudioInputNode *inputNode=[engine inputNode]; [inputNode setVoiceProcessingEnabled:NO error:nil]; NSMutableArray *micDestinations=[NSMutableArray arrayWithCapacity:trackCount]; for(i=0;i<trackCount;i++) { fixMicFormat[i]=[AVAudioMixerNode new]; [engine attachNode:fixMicFormat[i]]; // And create reverb/compressor and eq the same way... [engine connect:reverb[i] to:matrixMixerNode fromBus:0 toBus:i format:nil]; [engine connect:eq[i] to:reverb[i] fromBus:0 toBus:0 format:nil]; [engine connect:compressor[i] to:eq[i] fromBus:0 toBus:0 format:nil]; [engine connect:fixMicFormat[i] to:compressor[i] fromBus:0 toBus:0 format:nil]; [micDestinations addObject:[[AVAudioConnectionPoint alloc] initWithNode:fixMicFormat[i] bus:0] ]; } AVAudioFormat *inputFormat = [inputNode outputFormatForBus: 1]; [engine connect:inputNode toConnectionPoints:micDestinations fromBus:1 format:inputFormat];

Hi, I'm still stuck getting a basic record-with-playthrouh pipeline to work. Has anyone a sample of setting up a AVAudioEngine pipeline for recording with playthrough? Plkaythrough works with AVPlayerNode as input but not with any microphone input. The docs mention the "enabled state" of the outputNode of the engine without explaining the concept, i.e. how to enable an output. When the engine renders to and from an audio device, the AVAudioSession category and the availability of hardware determines whether an app performs output. Check the output node’s output format (specifically, the hardware format) for a nonzero sample rate and channel count to see if output is in an enabled state. Well, in my setup the output is NOT enabled, and any attempt to switch (e.g. audioEngine.outputNode.auAudioUnit.setDeviceID(deviceID) )/ attach a dedicated device / ... results in exceptions / errors

Hello, Starting in iOS 17, our application started having some issue publishing to our video session. More specifically the video capture seems to be broken in some, but not all sessions. What's troubling is that we're seeing that it fails consistently every 4 sessions. It also fails silently, without reporting any problems to the app. We only notice that there are no frames being rendered or sent to the remote devices. Here's what shows-up in the console: <<<< FigCaptureSourceRemote >>>> Fig assert: "! storage->connectionDied" at bail (FigCaptureSourceRemote.m:235) - (err=0) <<<< FigCaptureSourceRemote >>>> Fig assert: "err == 0 " at bail (FigCaptureSourceRemote.m:253) - (err=-16453) Anyone seeing this? Any idea what could be the cause? Our sessions work perfectly on iOS16 and below. Thanks

I have both apple devices, AirPods Pro 3 is up to date and Ultra 3 is on watch os 26.1 latest public beta. Each morning when I would go on my mindfulness app and start a meditation or listen to Apple Music on my watch and AirPods Pro 3, it will play for a few seconds then disconnects. My bluetooth settings on my watch says my AirPods is connected to my watch. I also have removed the tick about connecting automatically to iPhone on the AirPods setting in my iPhone. To fix this I invariably turn off my Apple Watch Ultra 3 and turn it on again. Then the connection becomes stable. I am not sure why I have to do this each morning. It is frustrating. I am not sure why this fix does not last long? Is there something wrong with my AirPods? Has anyone encountered this before?

Hi everyone, I’m working on an iOS MusicKit app that overlays a metronome on top of Apple Music playback. To line the clicks up perfectly I’d like access to low-level audio analysis data—ideally a waveform / spectrogram or beat grid—while the track is playing. I’ve noticed that several approved DJ apps (e.g. djay, Serato, rekordbox) can already: • Display detailed scrolling waveforms of Apple Music songs • Scratch, loop or time-stretch those tracks in real time That implies they receive decoded PCM frames or at least high-resolution analysis data from Apple Music under a special entitlement. My questions: 1. Does MusicKit (or any public framework) expose real-time audio buffers, FFT bins, or beat markers for streaming Apple Music content? 2. If not, is there an Apple program or entitlement that developers can apply for—similar to the “DJ with Apple Music” initiative—to gain that deeper access? 3. Where can I find official documentation or a point of contact for this kind of request? I’ve searched the docs and forums but only see standard MusicKit playback APIs, which don’t appear to expose raw audio for DRM-protected songs. Any guidance, links or insider tips on the proper application process would be hugely appreciated! Thanks in advance.

Hi everyone, I’m working on an iOS MusicKit app that overlays a metronome on top of Apple Music playback. To line the clicks up perfectly I’d like access to low-level audio analysis data—ideally a waveform / spectrogram or beat grid—while the track is playing. I’ve noticed that several approved DJ apps (e.g. djay, Serato, rekordbox) can already: • Display detailed scrolling waveforms of Apple Music songs • Scratch, loop or time-stretch those tracks in real time That implies they receive decoded PCM frames or at least high-resolution analysis data from Apple Music under a special entitlement. My questions: 1. Does MusicKit (or any public framework) expose real-time audio buffers, FFT bins, or beat markers for streaming Apple Music content? 2. If not, is there an Apple program or entitlement that developers can apply for—similar to the “DJ with Apple Music” initiative—to gain that deeper access? 3. Where can I find official documentation or a point of contact for this kind of request? I’ve searched the docs and forums but only see standard MusicKit playback APIs, which don’t appear to expose raw audio for DRM-protected songs. Any guidance, links or insider tips on the proper application process would be hugely appreciated! Thanks in advance.

Hi everyone, I’m working on an iOS MusicKit app that overlays a metronome on top of Apple Music playback. To line the clicks up perfectly I’d like access to low-level audio analysis data—ideally a waveform / spectrogram or beat grid—while the track is playing. I’ve noticed that several approved DJ apps (e.g. djay, Serato, rekordbox) can already: • Display detailed scrolling waveforms of Apple Music songs • Scratch, loop or time-stretch those tracks in real time That implies they receive decoded PCM frames or at least high-resolution analysis data from Apple Music under a special entitlement. My questions: 1. Does MusicKit (or any public framework) expose real-time audio buffers, FFT bins, or beat markers for streaming Apple Music content? 2. If not, is there an Apple program or entitlement that developers can apply for—similar to the “DJ with Apple Music” initiative—to gain that deeper access? 3. Where can I find official documentation or a point of contact for this kind of request? I’ve searched the docs and forums but only see standard MusicKit playback APIs, which don’t appear to expose raw audio for DRM-protected songs. Any guidance, links or insider tips on the proper application process would be hugely appreciated! Thanks in advance.

{ "aps": { "content-available": 1 }, "audio_file_name": "ding.caf", "audio_url": "https://example.com/audio.mp3" } When the app is in the background or killed, it receives a remote APNs push. The data format is roughly as shown above. How can I play the MP3 audio file at the specified "audio_url"? The user does not need to interact with the device when receiving the APNs. How can I play the audio file immediately after receiving it?

I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.

I've been wondering if there is a way to modify or even disable tones for indicating channel states. The behaviour regarding tones seems like a black box with little documentation. During migration to Apple's PT Framework we've noticed that there are few scenarios where a tone is played which doesn't match certain certifications. For example; moving from a channel to another produces a tone which would fail a test case. I understand the reasoning fully, as it marks that the channel is ready to transmit or receive, but this doesn't mirror the behaviour of TETRA which would be wanted in this case. I'm also wondering if there would be any way to directly communicate feedback regarding PT Framework?

Hi, I try to record audio on the iPhone with the AVAudioRecorder and Xcode 26.0.1. Maybe the problem is that I can not record audio with the simulator. But there's a menu for audio. In the plist I added 'Privacy - Microphone Usage Description' and I ask for permission before recording. if await AVAudioApplication.requestRecordPermission() { print("permission granted") recordPermission = true } else { print("permission denied") } Permission is granted. let settings: [String : Any] = [ AVFormatIDKey: kAudioFormatMPEG4AAC, AVSampleRateKey: 12000, AVNumberOfChannelsKey: 1, AVEncoderAudioQualityKey: AVAudioQuality.high.rawValue ] recorder = try AVAudioRecorder(url: filename, settings: settings) let prepared = recorder.prepareToRecord() print("prepared started: \(prepared)") let started = recorder.record() print("recording started: \(started)") started is always false and I tried many settings. Error messages AddInstanceForFactory: No factory registered for id <CFUUID 0x600000211480> F8BB1C28-BAE8-11D6-9C31-00039315CD46 AudioConverter.cpp:1052 Failed to create a new in process converter -> from 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame, with status -50 AudioQueueObject.cpp:1892 BuildConverter: AudioConverterNew returned -50 from: 0 ch, 12000 Hz, .... (0x00000000) 0 bits/channel, 0 bytes/packet, 0 frames/packet, 0 bytes/frame to: 1 ch, 12000 Hz, aac (0x00000000) 0 bits/channel, 0 bytes/packet, 1024 frames/packet, 0 bytes/frame prepared started: true AudioQueueObject.cpp:7581 ConvertInput: aq@0x10381be00: AudioConverterFillComplexBuffer returned -50, packetCount 5 recording started: false All examples I find are the same, but apparently there must be something different.

After update,WeChat voice chatting no sounds, please help

Hi everyone 👋 I’m building an iOS app in Swift where I want to do the following: Record the user’s voice Transcribe the spoken sentence (speech-to-text) Auto-detect the spoken language Translate it to another language selected by the user (e.g., English → Spanish or Hindi → English) Speak back (text-to-speech) the translated text on the same device Is this possible to record via phone mic and play the transcribe voice into headphone's audio?

Hi, I'm trying to setup a AVAudioEngine for USB Audio recording and monitoring playthrough. As soon as I try to setup playthough I get an error in the console: AVAEInternal.h:83 required condition is false: [AVAudioEngineGraph.mm:1361:Initialize: (IsFormatSampleRateAndChannelCountValid(outputHWFormat))] Any ideas how to fix it? // Input-Device setzen try? setupInputDevice(deviceID: inputDevice) let input = audioEngine.inputNode // Stereo-Format erzwingen let inputHWFormat = input.inputFormat(forBus: 0) let stereoFormat = AVAudioFormat(commonFormat: inputHWFormat.commonFormat, sampleRate: inputHWFormat.sampleRate, channels: 2, interleaved: inputHWFormat.isInterleaved) guard let format = stereoFormat else { throw AudioError.deviceSetupFailed(-1) } print("Input format: \(inputHWFormat)") print("Forced stereo format: \(format)") audioEngine.attach(monitorMixer) audioEngine.connect(input, to: monitorMixer, format: format) // MonitorMixer -> MainMixer (Output) // Problem here, format: format also breaks. audioEngine.connect(monitorMixer, to: audioEngine.mainMixerNode, format: nil)

Hey there, I just upgraded to Mac OS Tahoe ,son an apple MacBook Pro 2019 16inch. am using IntellijIDEA and Flutter to develop a mobile app which I test on the simulator app running iOS 18.4 . the issue: when I start the simulator app. ( while in the loading phase and in the operation phase as well ), the audio from an already open YouTube tab on safari (this happens on chrome browser as well). the sound glitches and becomes Noise. a fix I found online is to kill the audio deamon on Mac OS, This works using the command: "sudo killall coreaudiod" this kills the audio process, (while the emulator is operational), then the macOS restarts the audio deamon then the audio works fine alongside with the simulator being open. I just want to ask is there a permanent fix for this? is Apple working on a fix for this in the upcoming update?

Hi all, I have been quite stumped on this behavior for a little bit now, so thought it best to share here and see if someone more experience with AVAudioEngine / AVAudioSession can weigh in. Right now I have a AVAudioEngine that I am using to perform some voice chat with and give buffers to play. This works perfectly until route changes start to occur, which causes the AVAudioEngine to reset itself, which then causes all players attached to this engine to be stopped. Once a AVPlayerNode gets stopped due to this (but also any other time), all samples that were scheduled to be played then get purged. Where this becomes confusing for me is the completion handler gets called every time regardless of the sound actually being played. Is there a reliable way to know if a sample needs to be rescheduled after a player has been reset? I am not quite sure in my case what my observer of AVAudioEngineConfigurationChange needs to be doing, as this engine only handles output. All input is through a separate engine for simplicity. Currently I am storing a queue of samples as they get sent to the AVPlayerNode for playback, and after that completion checking if the player isPlaying or not. If it's playing I assume that the sound actually was played- and if not then I leave it in the queue and assume that an observer on the route change or the configuration change will realize there are samples in the queue and reset them Thanks for any feedback!

I have a PCM audio buffer (AVAudioPCMFormatInt16). When I try to play it using AVPlayerNode / AVAudioEngine an exception is thrown: "[[busArray objectAtIndexedSubscript:(NSUInteger)element] setFormat:format error:&nsErr]: returned false, error Error Domain=NSOSStatusErrorDomain Code=-10868 (related thread https://forums.developer.apple.com/forums/thread/700497?answerId=780530022#780530022) If I convert the buffer to AVAudioPCMFormatFloat32 playback works. My questions are: Does AVAudioEngine / AVPlayerNode require AVAudioPCMBuffer to be in the Float32 format? Is there a way I can configure it to accept another format instead for my application? If 1 is YES is this documented anywhere? If 1 is YES is this required format subject to change at any point? Thanks! I was looking to watch the "AVAudioEngine in Practice" session video from WWDC 2014 but I can't find it anywhere (https://forums.developer.apple.com/forums/thread/747008).

I want the audio session to always use the built-in microphone. However, when using the setPreferredInput() method like in this example private func enableBuiltInMic() { // Get the shared audio session. let session = AVAudioSession.sharedInstance() // Find the built-in microphone input. guard let availableInputs = session.availableInputs, let builtInMicInput = availableInputs.first(where: { $0.portType == .builtInMic }) else { print("The device must have a built-in microphone.") return } // Make the built-in microphone input the preferred input. do { try session.setPreferredInput(builtInMicInput) } catch { print("Unable to set the built-in mic as the preferred input.") } } and calling that function once in the initializer, the audio session still switches to the external microphone once one is plugged in. The session's preferredInput is nil again at that point, even if the built-in microphone is still listed in availableInputs. So, why is the preferredInput suddenly reset? when would be the appropriate time to set the preferredInput again? Observing the session’s availableInputs did not work and setting the preferredInput again in the routeChangeNotification handler seems a bad choice as it’s already a bit too late then.