Hello all, As you may know, the company ProofPoint is an Apple partner, and is engaged (I think) to reduce misuse of icloud emails. We have two servers solely set up for our web-app, which is a specialised forum for apartment owners. The new servers were established about the same time, with the same provider, with clean new IP addresses - and as mentioned above, are only used for this web-app. During a testing phase a YEAR ago, we became aware that our in-house icloud emails weren't receiving notifications via the app, and further investigations revealed that the cause was that ProofPoint had placed a block on that server's IP. We immediately, via their website form initiated a Support Ticket, which, the site indicated was lodged, BUT we have never received any response to that Ticket, nor have we received any response to four subsequent Tickets we initiated - nothing. In over a year!! Yesterday, we contacted Apple support, but the devices area of support is the main section and they said it wasn't an issue they could assist with. Some relevant matters: SPF: DKIM: DMARC: are, I believe all configured correctly (and Gmail gives a PASS to all of them). The IP is not blacklisted by any list we are aware of. Our other server's IP isn't blocked by ProofPoint. So, literally at wits end, I'm reaching out to the developer subscribers here to see if they have any suggestions for us. We currently are unable to accept any new subscriber that is using an icloud email address, and that's an absurd situation to be in. Surely we don't have to go to the trouble and inconvenience of obtaining a new IP because of this!!! But when we can't get ANY response to the Support Tickets, it's really hard. Thanks

Hi everyone, We’ve recently run into an issue with Apple Pay on the web and would appreciate some clarification. Background: Previously, we integrated Apple Pay without using the Apple Pay JS SDK. We relied on ApplePaySession.canMakePayments() to check availability, and it worked fine. After Apple announced support for browsers beyond Safari, we switched to the Apple Pay JS SDK. According to Apple’s documentation, we should now use applePayCapabilities() for capability checks in third-party browsers. Our current behavior: We implemented applePayCapabilities(). Initially, it was returning either paymentCredentialStatusUnknown or paymentCredentialsUnavailable. Based on those values, we displayed the Apple Pay button. The problem: About a week ago, on the same device/browser, applePayCapabilities() started returning applePayUnsupported. Setup: MacBook Pro 13-inch (M1, 2020), Google Chrome Version 136.0.7103.93. The Apple documentation says: “Don’t show an Apple Pay button or offer Apple Pay” when the result is applePayUnsupported. However, at the same time, canMakePayments() is returning true. This creates a direct conflict between the two recommendations: canMakePayments() → true ⇒ show the button. applePayCapabilities() → applePayUnsupported ⇒ don’t show the button. Question: What’s the correct approach here? Should we prioritize applePayCapabilities() and hide the button, or is it acceptable to continue relying only on canMakePayments() as the source of truth for showing Apple Pay? Any insights from others who’ve run into this contradiction would be very helpful. Thanks in advance!

We are encountering an issue where the Safari extension we are developing stops working while in use on relatively new iOS versions (confirmed on 17.5.1, 17.6.1, and 18). Upon checking the Safari console, the content script is displayed in the extension script, so the background script or Service Worker must be stopping. The time until it stops is about 1 minute on 17.5.1 and about one day on 17.6.1 or 18. When it stops, we would like to find a way to restart the Service Worker from the extension side, but we have not found a method to do so yet. To restart the extension, the user needs to turn off the corresponding extension in the iPhone settings and then turn it back on. As mentioned in the following thread, it is written that the above bug was fixed in 17.6, but we recognize that it has not been fixed. https://forums.developer.apple.com/forums/thread/758346 On 17.5.1, adding the following process to the background script prevents it from stopping for about the same time as on 17.6 and above. // Will be passed into runtime.onConnect for processes that are listening for the connection event const INTERNAL_STAYALIVE_PORT = "port.connect"; // Try wake up every 9S const INTERVAL_WAKE_UP = 9000; // Alive port var alivePort = null; // Call the function at SW(service worker) start StayAlive(); async function StayAlive() { var wakeup = setInterval(() => { if (alivePort == null) { alivePort = browser.runtime.connect({ name: INTERNAL_STAYALIVE_PORT }); alivePort.onDisconnect.addListener((p) => { alivePort = null; }); } if (alivePort) { alivePort.postMessage({ content: "ping" }); } }, INTERVAL_WAKE_UP); } Additionally, we considered methods to revive the Service Worker when it stops, which are listed below. None of the methods listed below resolved the issue. ① Implemented a process to create a connection again if the return value of sendMessage is null. The determination of whether the Service Worker has stopped is made by sending a message from the content script to the background script and checking whether the message return value is null as follows. sendMessageToBackground.js let infoFromBackground = await browser.runtime.sendMessage(sendParam); if (!infoFromBackground) { // If infoFromBackground is null, Service Worker should have stopped. browser.runtime.connect({name: 'reconnect'}); // ← reconnection process // Sending message again infoFromBackground = await browser.runtime.sendMessage(sendParam); } return infoFromBackground.message; Background script browser.runtime.onConnect.addListener((port) => { if (port.name !== 'reconnect') return; port.onMessage.addListener(async (request, sender, sendResponse) => { sendResponse({ response: "response form background", message: "reconnect.", }); }); ② Verified whether the service worker could be restarted by regenerating Background.js and content.js. sendMessageToBackground.js export async function sendMessageToBackground(sendParam) { let infoFromBackground = await browser.runtime.sendMessage(sendParam); if (!infoFromBackground) { executeContentScript(); // ← executeScript infoFromBackground = await browser.runtime.sendMessage(sendParam); } return infoFromBackground.message; } async function executeContentScript() { browser.webNavigation.onDOMContentLoaded.addListener((details) => { browser.scripting.executeScript({ target: { tabId: details.tabId }, files: ["./content.js"] }); }); } However, browser.webNavigation.onDOMContentLoaded.addListener was not executed due to the following error. @webkit-masked-url://hidden/:2:58295 @webkit-masked-url://hidden/:2:58539 @webkit-masked-url://hidden/:2:58539 ③ Verify that ServiceWorker restarts by updating ContentScripts async function updateContentScripts() { try { const scripts = await browser.scripting.getRegisteredContentScripts(); const scriptIds = scripts.map(script => script.id); await browser.scripting.updateContentScripts(scriptIds);//update content } catch (e) { await errorLogger(e.stack); } } However, scripting.getRegisteredContentScripts was not executed due to the same error as in 2. @webkit-masked-url://hidden/:2:58359 @webkit-masked-url://hidden/:2:58456 @webkit-masked-url://hidden/:2:58456 @webkit-masked-url://hidden/:2:58549 @webkit-masked-url://hidden/:2:58549 These are the methods we have considered. If anyone knows a solution, please let us know.

Hi everyone, i'm running into a problem with my personal domain being flagged as 'deceptive website' in safari, and i can't figure out how to fix it Domain: neon0404.space This is just my personal domain - i use it for adguard home, vaultwarden, some test stuff, sometimes small web tools for friends or family Nothing illegal or malicious has ever been hosted there On july 6, i launched a very simple web utility for a friend when he opened it on ios safari, he got the red 'deceptive website warning' I checked this on other different devices - all got the same warning The next day (july 7) i submitted a review request via websitereview.apple.com, but got no reply I did some digging and found that safari safe browsing daemon pulls data from google safe browsing, tencent safe browsing, and some apple's internal lists So, going one-by-one https://transparencyreport.google.com/safe-browsing/search showed up that domain is flagged for something shady Signed up in google search console and saw my domain was flagged for 'malware links' (with no related urls listed), so looked like a false positive I audited everything related to this domain on august 5 - nothing suspicious Next day i requested a review in Google Search Console, just next day Google confirmed that everything is ok and removed the flag So, i thought, maybe this was the key and requested another review via websitereview.apple.com (august 7) No reply, domain still flagged While i was waiting, i checked domain in Tencent (https://urlsec.qq.com/check.html) - no issues Other services like VirusTotal, Norton and Sucuri showed up same result - no issues I attempted to contact regular support (even though it's not their area of responsibility), but just in case They, as expected, couldn't do anything At this point it feels like a dead end, so i'm here Has anyone been through this before? Is there any other way to escalate the review process with apple? Really appreciate any advice, as this domain is personal and linked to my username, which i want to use later

Hi,
 We’re implementing Apple Pay on the Web for a multi-tenant platform via a PSP. The PSP operates multiple HSM/clusters and gave us multiple CSRs, asking us to register all.
Our understanding: a Merchant ID can hold several PPCs over time, but only one is active at once. Questions Is there any supported way to keep more than one PPC active simultaneously for the same Merchant ID? If not, what does Apple recommend for web-only, multi-tenant setups: a single MID with PSP-side decryption & sub-merchant separation, or separate MIDs per brand/region? Any official guidance on PPC rotation and handling many domains for Apple Pay on the Web? links to official docs or prior Apple responses would be appreciated.

ios26beta8 mesh不切换

Hello, We are setting up Apple Sign In in one of our non production websites but we keep getting a "oauth code says expired or revoked" error. We have created a brand new service ID and key for this but are still getting this error.

Area: WebKit (Safari) Description: I am reporting an issue where our application's core functionality is being broken by Safari's Intelligent Tracking Prevention (ITP). ITP's "Link Tracking Protection" feature automatically strips specific query parameters from URLs. We understand this is an intentional privacy feature. However, our application requires these query parameters to carry essential, non-tracking data, such as authentication tokens or specific app-state information to function correctly. When a user navigates to our site, Safari strips these parameters, this means our client-side application never receives the necessary data, which breaks core features and leads to a failed user experience. This is a significant issue for our application as it prevents users from accessing their content. We are seeking guidance on how to resolve this. Questions for Apple: Is there a recommended way to identify and flag essential, non-tracking query parameters so that Safari's ITP does not strip them? Our parameters are critical for app functionality, not for third-party tracking. What is the recommended best practice for building web applications that rely on URL parameters while adhering to ITP's privacy-first model? We want to ensure our application is compatible with modern browser privacy features without compromising functionality. Could you provide a detailed explanation of what criteria ITP uses to decide which parameters to strip? Understanding the underlying logic would help us restructure our URLs to avoid this issue. Device Information: Operating System: iOS and macOS Safari Version: Latest stable versions on both platforms Device Models: All relevant models and device types

As you see in the image, when I fullscreen in WKWebView, it shows black instead of the webpage in full screen. It works fine in Sequoia. It has happened to me since beta 1, but I post it now, because we’re in beta 8 and it’s not fixed. What’s going on? Can somebody tell me if they have the same issue?

WebAuthn can be used in Safari, but when using it with WKWebView, you need to set the default browser definition (com.apple.developer.web-browser). Is this correct? Also, is it possible that the terms of use will change or that it will no longer be available in WKWebView in the future?

Hey, very strange problem I have on iOS when shared web as an app (pwa) to home screen. Whenever I use it via safari browser on iPhone, it works 100% fine every time. However, when I put it as an app on home screen, first time I open it it works fine, when i close it and reopen again, it just doesnt start recording. I have to restart my phone for it to work. So it works one time, I guess somehow it doesnt end stream or something, but in code I've tried all the possible ways to close and clean the track. tried GPT, Claude, Gemini solutions. nothing worked, it just works 1 time as PWA. my last hope is someone else encountered this issue and may try to help me ? https://pastebin.com/85i2L2vH

I'm creating an iPad app using Xcode 26 Beta 6. I have the following simple code and web page, but when I tap the file selection button, nothing appears. Do I need to add any additional code? code struct SwiftUIWebView: View { @State private var webPage = WebPage() private let url = URL(string: "https://www.xxxx.com/")! var body: some View { WebView(webPage) .onAppear { webPage.load(URLRequest(url: url)) } } } web page <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title>Test</title> </style> </head> <body> <div id="container"> <input type="file" /> </div> </body> </html>

If we use webView.loadFileURL(indexURL, allowingReadAccessTo: readAccessURL) on an iPad it loads the data and navigation works. But if we place two hands on top of the screen and move a bit, all click events are not working anymore. It works again if we call loadFileURL again. We filled a bug report: FB19812304

Can someone please tell me which experimental WebKit feature would cause safari to keep timing out on certain sites with a lot of Java script due to heavy cpu drainage. I can provide analytics data if this helps.

Can anyone of Apple give a status update whats planed with CC module scripts? Issue: https://bugs.webkit.org/show_bug.cgi?id=227967

I’m experiencing a crash in WKWebView on iOS 26 Developer Beta 5 and Beta 6 with the following exception: CALayer position contains NaN: [nan 65] The crash occurs when the following CSS properties are applied to content displayed in WKWebView: -webkit-user-select: none; -webkit-touch-callout: none; This issue happens consistently whenever these styles are set, leading to the crash inside WKWebView. Is this a known bug in the current iOS 26 betas, or is there a recommended workaround?

I recently noticed that putting the app on background for some time, then switching back to it again causes the WKWebView to reload the current page, same with just hitting f5 on it. How do we disable this behavior?

Our UI-less share extension (com.apple.services) appears in Safari and Chrome. We raise a popup "Open in (app)..." via the Action.js script document.location.href = urlScheme://... in Safari. However, in Chrome, while our extension executes, parses the URL item attachment from Chrome, it never triggers that popup or opens our app. How can a UI-less share extension open our app from Chrome? Is the accepted practice, despite guidelines, turning the com.apple.ui-services view controller invisible and auto-openURLing? Several apps on the store appear to do this, immediately popping their app without any confirmation dialog or UI in both Safari and Chrome. https://stackoverflow.com/a/79369242

I have a Net8 Maui WebView app and whenever I use magnifier, it crashes. The magnifier works on iOS18 and lower but crashes on iOS26+ Exception **Type:** CALayerInvalidGeometry **Value:** CALayer position contains NaN: [nan 65]. Layer: <CALayer:0x123e88e40; position = CGPoint (0 0); bounds = CGRect (0 0; 0 48); delegate = <_UIEditMenuListView: 0x116f2f200; frame = (nan 0; 0 48); anchorPoint = (inf, 0); alpha = 0; layer = <CALayer: 0x123e88e40>>; sublayers = (<CALayer: 0x125232df0>, <CALayer: 0x123e88e70>); opaque = YES; allowsGroupOpacity = YES; anchorPoint = CGPoint (inf 0); opacity = 0> Stacktrace __exceptionPreprocess in unknown file [Line null, column null] (Not in app) objc_exception_throw in unknown file [Line null, column null] (Not in app) +[NSException raise:format:] in unknown file [Line null, column null] (Not in app) CA::Layer::set_position in unknown file [Line null, column null] (Not in app) -[CALayer setPosition:] in unknown file [Line null, column null] (Not in app) -[UIView _backing_setPosition:] in unknown file [Line null, column null] (Not in app) -[UIView setCenter:] in unknown file [Line null, column null] (Not in app) -[_UIEditMenuContentPresentation _displayPreparedMenu:titleView:reason:didDismissMenu:configuration:] in unknown file [Line null, column null] (Not in app) __54-[_UIEditMenuContentPresentation _displayMenu:reason:]_block_invoke in unknown file [Line null, column null] (Not in app) -[UIEditMenuInteraction _editMenuPresentation:preparedMenuForDisplay:completion:] in unknown file [Line null, column null] (Not in app) -[_UIEditMenuContentPresentation _displayMenu:reason:] in unknown file [Line null, column null] (Not in app) -[_UIEditMenuContentPresentation displayMenu:configuration:] in unknown file [Line null, column null] (Not in app) __58-[UIEditMenuInteraction presentEditMenuWithConfiguration:]_block_invoke in unknown file [Line null, column null] (Not in app) __80-[UIEditMenuInteraction _prepareMenuAtLocation:configuration:completionHandler:]_block_invoke in unknown file [Line null, column null] (Not in app) __109-[UITextContextMenuInteraction _editMenuInteraction:menuForConfiguration:suggestedActions:completionHandler:]_block_invoke in unknown file [Line null, column null] (Not in app) __107-[UITextContextMenuInteraction _querySelectionCommandsForConfiguration:suggestedActions:completionHandler:]_block_invoke in unknown file [Line null, column null] (Not in app)

Hello, I am experiencing an issue when trying to open the browser on my Apple Watch SE 2 running the latest version, watchOS 11.6. When I attempt to visit any website, the browser opens and displays the URL at the top as if it is loading, but the screen remains black and no content is displayed. The internet connection is available, and all other apps on the watch work normally. This issue occurs only with the browser. I would appreciate any guidance or solution to resolve this problem. Thank you for your assistance.