Hi, You're here because you've had issues with your implementation of Wallet Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi, To ensure the issue is not caused by an error within your app or web service request, please review the Apple Pay Merchant Integration Guide. Additionally, please review the following technotes on Apple Pay: TN3173: Troubleshooting issues with your Apple Pay merchant identifier configuration TN3174: Diagnosing issues with the Apple Pay payment sheet on your website TN3175: Diagnosing issues with displaying the Apple Pay button on your website TN3176: Troubleshooting Apple Pay payment processing issues If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Apple Pay profile on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or merchant domain in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay website. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

I'm developing wallet extension for my app and using sandbox for testing. It was working properly on iOS 17, then I updated to iOS 18 and now the Wallet doesn't recognize my extension. It passes on 'status' method, but doesn't reach the 'passEntries' method. Does it have any solution?

We have integrated the card provisioning in Apple wallet for quite sometime now through an external processor and we got the App Entitlement for the same. Now we are building the card provisioning in Apple Wallet flow in our app. Though everything seems to work fine (including issuer certificates, nonce etc.) but when we are clicking on ADD button on card details screen, I am getting an error saying "Could Not Add Card". When I inspect the error from didFinishAddingPaymentPass, it reads "The operation couldn’t be completed. (PKPassKitErrorDomain error 2.)". Though the Apple documentation suggests it as an unsupportedVersionError but it does not say anything beyond that. I want more detailed explanation because of which I am getting this error

I am adding In-App provisioning to my app. I am able to access the Apple Pay Sandbox and I have successfully tested adding a secure element/payment pass to Apple Wallet. However, once the pass has been added to the wallet, I can not access or retrieve the pass from my app. I have confirmed with the PNO that the PNO Pass Metadata Configuration in the testing environment include the correct metadata for "associatedApplicationIdentifiers" and "associatedStoreIdentifiers". Does anyone know why I am having this issue and how I can resolve it? Steps used to access pass in Apple Wallet I am unable to view the pass when I attempt to access it using the PKPassLibrary function as follows: let library = PKPassLibrary() if #available(iOS 13.4, *) { // This returns an empty array library.passes(of: .secureElement) } else { // This also returns an empty array library.passes(of: .payment) } // This returns an empty array too library.passes() Steps used to add pass to Apple Wallet These are the steps I follow to add the card: I create a PKAddPaymentPassRequestConfiguration I use this config to instantiate a PKAddPaymentPassViewController. I provide the nonce, nonceSignature, and certificates to my PNO along with the card data. I receive the activationData, encryptedPassData, and ephemeralPublicKey from my PNO and create a PKAddPaymentPassRequest using this data. I add the pass to Apple Wallet. In the addPaymentPassViewController callback, I am able to view the pass data from the .didFinishAdding pass: PKPaymentPass? variable. I am also able to see that the pass has been added from Apple Wallet app. I am not able to access the pass using PKPassLibrary().passes() at this point. I am not able to access the pass at any point after adding it either.

I've encountered an issue where we need multiple domain associations with separate Apple Pay implementations. Briefly, we have a /.well-known/apple-developer-merchantid-domain-association already setup with Stripe, and now we need another, different version of the file to get setup with FreedomPay. FreedomPay insists this file represents a three-way relationship between all parties and I have no reason to disbelieve them. I'm wondering if anyone has encountered this or if there is a standard procedure. I'm currently trying to find documentation on the exact way Apple Pay verification interacts with this file to see if we can produce it dynamically.

I've implemented Push Provisioning, but am having trouble testing it. When I try to add a payment pass with my activationData, encryptedPassData, and ephemeralPublicKey, I see the "Add Card to Apple Pay" screen, but then when I click "Add Card", I get a "Could Not Add Card" message. When I inspect the error from didFinishAddingPaymentPass, it reads "The operation couldn’t be completed. (PKPassKitErrorDomain error 2.)". Is this error PKPassKitError.Code.unsupportedVersionError? What does this error means? Additional context: We use cordova-apple-wallet to generate certificates and add payment pass.

My account has reached it's 99 merchant ID limit and I have applied and got approval for using the API that allows me to exceed the limit. I was testing the API according to the documentation in Postman, but I am getting the following error: POST https : //apple- pay-gateway.apple.com/paymentservices/registerMerchant Error: read ECONNRESET Please find below the cURL we are using according to the docs: curl --location 'https://apple-pay-gateway.apple.com/paymentservices/registerMerchant' --header 'Content-Type: application/json' --data '{ "domainNames": "https://checkout.montypay.com", "encryptTo": "merchant.test.montypay", "partnerInternalMerchantIdentifier": "merchant.test.montypay", "partnerMerchantName": "Test" }' Please note that I tried the Live and the sandbox endpoints and both gave the same error.

I am trying to find solutions past 4 days. but not getting any reference about NFC implementation in my app to read Debit/Credit card upon user consent? Can you confirm apple is provided any api for read Debit/Credit card using NFC or not. Tried with normal NFCReader but it reads only for normal tags but nothing with Visa/ MasterCard cards. Looking forward some help from you. Thanks

This error occurs in Apple Pay Wallet In-App Provisioning Flow for Credit / Debit Cards When the data received from the PNO (Visa) is passed to PKAddPaymentPassRequest this error is seen in addPaymentPassViewController, in the finalize stage. Docs provide no clue as to what could be wrong. iOS 18.2.1 XCode 15.2 Error description mentions "unsupportedVersionError" Is the pass version not supported? Is the wallet version not supported? Is it an app implementation error or error in the data received from the PNO?

We rely on ApplePaySession.applePayCapabilities() to decide whether to show the Apple Pay button. We use two different merchant IDs for non-prod/prod environments, and encountered a change in behavior where this API now returns different results. These merchant IDs are generated from a third-party provider Adyen. However, Adyen has informed us that they are unable to identify the root cause of the issue and advised us to seek assistance directly from Apple Pay support. Timeline Last known working date: 13/08/2025 Issue first noticed: 18/08/2025 Environment Details Apple Pay JS API version 1.latest Browsers Tested: Third party browsers including Chrome/139.0.0.0, Firefox/141.0 Browsers with ApplePaySession built-in (like iOS Chrome, iOS Safari, and macOS Safari) are working fine Framework Stack: Angular v18.1.3 (important) no configuration setup in Apple dev account, merchantId is generated from a third-party provider Adyen. Current Execution Flow: Apple Pay JS API script element is injected <script type="text/javascript" async="" src="https://applepay.cdn-apple.com/jsapi/1.latest/apple-pay-sdk.js"></script> Triggers below to check apple pay readiness, different ${merchantId_credential} is used: await window.ApplePaySession.applePayCapabilities(`${merchantId_credential}`); (**ApplePaySession is a valid object at this point) Observed that different paymentCredentialStatus is returned // nonprod env { "paymentCredentialStatus": "applePayUnsupported" // unexpected } // prod env { "paymentCredentialStatus": "paymentCredentialStatusUnknown" } The same code is executed in each environment and the behaviour was also the same, but has changed since then. Side notes By checking the SDK’s internal code, we saw that in third-party browsers it makes an extra call to the following endpoint. Responses from this call also come back differently depending on the merchantId. When invoking below: curl -X POST \ https://smp-paymentservices.apple.com/paymentservices/v3/checkStatus/merchant/{merchantId} \ -H 'Content-Type: application/json' \ -d '{ "initiative": "web", "initiativeContext": "env_specific_domain" }' Our non-prod environment returns {"registered":false} while using prod's merchantId and domain it returns {"registered":true}. We thought the issue might be domain-related since the environments are on different domains, but so far, no luck. The main questions we're looking to resolve are: Why did the behavior change at a certain point despite no code changes? How should we approach this investigation, and what specific requests should we be making to the Adyen team? Why does the response from the call to https://smp-paymentservices.apple.com/paymentservices/v3/checkStatus/merchant/{merchantId} return different results? Perhaps this could provide a clue regarding the question above? We noticed that canMakePayments() is returning true, so we could consider using that as a workaround. Would it be safe to change the source of truth relying on canMakePayments() for displaying Apple Pay? There is a concern that this issue may also occur in our production environment, so we would appreciate assistance in understanding what is happening and finding a resolution.

Description: I’m integrating Apple Pay JS (version 3) into an Angular application. Here are the key details: Environment: Angular (latest) Apple Pay JS v3 Chrome (confirmed window.ApplePaySession is available) application region is in US. I'm in Taiwan and using my iPhone Taiwan account to scan the QR Code/ Implemented Handlers: onvalidatemerchant onpaymentmethodselected onpaymentauthorized oncancel Observed Behavior: When I click the Apple Pay button, the console logs: Failed to execute 'postMessage' on 'DOMWindow': The target origin provided ('https://applepay.cdn-apple.com') does not match the recipient window's origin ('https://{our-domain-name}') Despite this, the QR code still appears. Scanning the QR code with an iPhone 13 Pro running iOS 18.4.1 brings up the Apple Pay sheet with the correct amount, but payment never completes. In the browser, none of my Angular event handlers fire except oncancel. Questions: What causes the postMessage origin mismatch with Apple’s CDN frame, and how should my application handle it? Why doesn’t onpaymentauthorized ever fire, and how can I complete the payment flow so that session.completePayment() succeeds? Any guidance or sample code snippets for a proper merchant-validation and payment-completion sequence in this setup would be greatly appreciated. my code onApplePayButtonClicked() { if (!ApplePaySession) { console.error('[ApplePay] ApplePaySession is not supported'); return; } // Define ApplePayPaymentRequest const request : ApplePayJS.ApplePayPaymentRequest = { countryCode: this.currencyCode, currencyCode: Constants.CountryCodeUS, merchantCapabilities: this.merchantCapabilities, supportedNetworks: this.supportedNetworks, total: { label: this.label, type: "final" as ApplePayJS.ApplePayLineItemType, amount: this.orderAmount.toString(), }, }; // Create ApplePaySession const session = new ApplePaySession(3, request); session.onvalidatemerchant = async event => { console.info('[ApplePay] onvalidatemerchant', event); try { const merchantSession = await fetch(`${this.paymentUrl}/api/applepay/validatemerchant`, { method: 'POST', headers: { 'Content-Type': 'application/json', }, body: JSON.stringify({ PKeyCompany: this.paymentAppleMerchantId, ValidationUrl: event.validationURL }) }).then((r) => r.json()); session.completeMerchantValidation(merchantSession); } catch (error) { console.error('[ApplePay] onvalidatemerchant MerchantValidation error', error); session.abort(); } }; session.onpaymentauthorized = (event) => { console.info('[ApplePay] paymentauthorized', event); const token = event.payment.token; this.paymentTokenEmitted.emit({ token: JSON.stringify(token), paymentType: PaymentOptionType.ApplePay }); session.completePayment(ApplePaySession.STATUS_SUCCESS); }; session.onpaymentmethodselected = (event) => { console.info('[ApplePay] paymentmethodselected', event); const update: ApplePayJS.ApplePayPaymentMethodUpdate = { newTotal: request.total }; session.completePaymentMethodSelection(update); }; session.oncancel = (event) => { console.error('[ApplePay] oncancel', event); this.errorEmitted.emit({ error: 'Apple Pay cancel' }); }; session.begin(); }

We are writing to report a recurring stability issue with the Apple Pay sandbox environment. We are using the official sandbox test cards provided on the Apple Developer website for our testing: https://developer.apple.com/apple-pay/sandbox-testing/ We are experiencing frequent, intermittent failures when attempting to add these sandbox cards to the Wallet for testing purposes. The issue typically occurs a couple of times per day. When the failure occurs, the card provisioning process fails unexpectedly. The issue is not limited to a single card; we have observed this behavior across all available card networks. In some instances, all cards (Visa, Mastercard, Discover, Amex) fail to provision simultaneously. At other times, the issue appears to be isolated to specific networks while others work correctly. Crucially, the issue appears to be temporary. After some time passes (ranging from minutes to an hour), we are able to add the exact same card successfully without making any changes to our test environment or configuration. We have diligently checked our setup to rule out configuration errors on our end. This includes verifying: The device is set to a supported region. We are signed in with a valid sandbox tester Apple ID. All other prerequisites for sandbox testing are met. The fact that the process works correctly at other times strongly suggests that this is a server-side stability issue within the Apple Pay sandbox environment rather than a persistent misconfiguration on our part. To help with your investigation, we have attached an image that demonstrates a failed attempt to add a card. Could you please investigate the stability of the sandbox card provisioning service? Please let us know if this is a known issue or if there is any further information we can provide. Thank you for your time and assistance.

Does anyone know how to register as a psp for apple pay. My psp is based in the UAE and I cant seem to find an easy way to enroll the psp to apple pay

We’re building a usage-based rental flow. The final charge is only known after the session ends (like gas pumps). We want the same Apple Pay UX that gas stations like at a gas station has: the user does not see a pre-authorization amount up front; they only see “approved” and later the final posted amount on the statement. What we observe (gas stations / desired UX) When paying at gas station with Apple Pay (card-present), the user confirms their card (double-tap) but no pre-auth amount is shown in Wallet/notification UI. The small notification is from the bank (not the merchant) and shows only bank + merchant name, no total. After fueling ends, the final amount appears on the statement from the merchant. What happens in our flow (current behavior) Platform: Apple Pay via Stripe (Apple Pay on the Web with QR → mobile Safari Wallet sheet). When a user confirms payment, the pre-authorization amount is shown immediately to the user (appears like a charge from the user’s perspective). We want to avoid showing that amount, matching the pay-at-pump experience.

I tried to test In-App Provisioning in Production for our whitelisted app through TestFlight (Internal Testing Track) and we received the following error response from PassBook during the provisioning attempt, Could you please guide us? Error Response from sysdiagnose PassBookUIService during In-App Provisioning attempt: { statusCode = 500; statusMessage = "Broker Service Response exception"; } I reported the error in Feedback Assistant: ID: FB16112348 (500 Broker Service Response exception during Apple Pay In-App Provisioning ). Note:- I am reffering to Getting Started with Apple Pay: In-App Provisioning, Verification, Security, and Wallet Extensions

Hello My app has implementation of In App Provisioning which is working fine. We have now added Wallet Extensions to it, but my App is not shown in Apple Wallet "From apps on your iphone" I have uploaded Feedback (FB16450547) at https://feedbackassistant.apple.com/feedback/16450547 Kindly request for your advice

Hi guys, We are trying to implement a solution that would allow users to subscribe to other users in our app. The system should work the same way as Twitch's subscription model works. Users should be able to subscribe to anyone and each subscription should have different tiers. From what we were able to gather, users cannot have multiples of the same subscription on applestoreconnect. Meaning that we would probably need to make a custom subscription per every user? Here we have also learned that there is a limit of 10 000 types of subscriptions and that it is not possible to dynamically create/delete them for users. (correct me if I am wrong) Is there a solution for handling this type of a scenario? Appreciate all answers.

So we are developing an NFC reader for a client and one of the requirements was Apple ECP. We submitted a product plan and it was approved and we were given access to the specific documentation for ECP. We are looking to only use Loyalty passes via NFC. Not Apple Pay. We wish to develop passes that have NFC capability and apparently you need another approval for NFC Entitlement. Apple just denied our application. No reason given, just denied. How are we suppose to develop a solution when we can only do one side of the development? Also we are seeing VAS mentioned and believe we also need access to this documentation as well, but no idea where to request it. Nothing in our developer portal or wpc portal. Can someone from Apple please steer us in the right direction. As we understand it we need: Approved hardware product plan (which we have) Access to ECP 2.0 documentation (which we have) Access to VAS protocol documentation (we don't have) NFC entitlement to be able to create NFC enabled passes. Let me know what we need to do or if I am not understanding things correctly. Thanks

I'm implementing Apple Pay for our application via the Apple Pay JS API, and everything works as expected when initiating a session from a Safari browser. However, when attempting to start a session in a non-Safari browser (Chrome in this case), I see the following behavior: The "Scan Code with iPhone" popup appears I scan the code with my device (9th gen iPad running iPadOS 18.5 if that matters) The Apple Pay view does not appear on the device, and the "Scan Code" popup closes on the browser without any further information given. I can see the messages being passed in the network tab, with the final message being a "getPaymentRequestResponse" message appearing at the time the code is scanned. I suspect merchant validation is failing since that should be the next step, but that's just an educated guess at this point. I would appreciate any help getting this issue resolved.

I'm facing problem with in-app-provisioning in production application. When we try to tokenize (before T&C step) we are getting error from topic. I've also posted this in Feedback Assistant: FB18403577. I'll be very happy if someone could help me to get what is wrong with data or configuration of application.

Hello all, I’m helping a customer integrate Apple Pay, and I’m seeing a behavior I can’t fully explain. I hope someone here can help clarify whether this is expected or whether it’s a bug / misconfiguration on my side. Currency: RSD (Serbian Dinar) Amount: 3.45 RSD (two decimals) Result: Apple Pay cancels the payment automatically when the amount includes decimals, without even displaying the paymentsheet. Things I have checked: ISO 4217 defines RSD with 2 minor units, so fractional amounts like 3.45 should be valid. Processors treat RSD as a two-decimal currency. Apple’s documentation does not provide a per-currency decimal rule table. In testing, whole-number RSD amounts succeed, while fractional amounts (e.g. 3.45 RSD) fail. I did not encounter this problem with other currencies like EUR, USD. Has anyone encountered this issue before?