Hi, You're here because you've had issues with your implementation of In-App Provisioning Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi, To ensure the issue is not caused by an error within your app or web service request, please review the Apple Pay Merchant Integration Guide. Additionally, please review the following technotes on Apple Pay: TN3173: Troubleshooting issues with your Apple Pay merchant identifier configuration TN3174: Diagnosing issues with the Apple Pay payment sheet on your website TN3175: Diagnosing issues with displaying the Apple Pay button on your website TN3176: Troubleshooting Apple Pay payment processing issues TN3206: Updating Apple Pay certificates If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Apple Pay profile on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or merchant domain in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay website. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

iOS 16 and earlier On iOS 16 and earlier, Apple Pay on the Web required Safari—and all interactions with the Apple Pay API to come from the parent/top level page. In order to facilitate the Apple Pay button in an HTML inline frame (iframe), there will need to be cross frame communication between the child and parent pages. Cross frame communication should be secure and robust, therefore the use of postMessage for this purpose is recommended. The expectation is for all communication with Apple Pay to occur from the parent page, so the iframe must relay all Apple Pay related events to the parent to handle. Some examples: Apple Pay availability: The parent calls applePayCapabilities, then sends the message of the response to the iframe, which then uses the value to toggle the visibility of the Apple Pay button. Apple Pay session: The iframe receives an onclick() event when the Apple Pay button is clicked and sends the message to the parent (providing details about the transaction). The parent create the payment request to obtain the session validation URL, and eventually receive session credentials and invokes completeMerchantValidation() to prevent the payment sheet. After the payment is authorized by the Payment Service Provider (PSP), the parent either: Redirects the parent page to a payment success page; or Sends a message to the iframe to complete the transaction flow itself. iOS 17 and later On IOS 17 and later, the iframe HTML element should include the allow="payment" attribute, which should facilitate the cross frame communications instead of needing a dedicated JavaScript library. This means all of the Apple Pay code/calls can reside in the iframe page—which is typically a hosted page from a Payment Service Provider (PSP), all the parent page—typically a merchant—has to do is add the attribute mentioned above to the iframe element. Important: Regardless of the iOS version, the PSP/merchant always needs to make sure the parent page domain is the one registered in the Developer portal, and used in the request to generate a merchant session via ApplePaySession. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hello we are trying to renew our certificates. We are trying to extend the dates of verified domains following the docs https://developer.apple.com/documentation/applepayontheweb/maintaining-your-environment#Renew-Your-Domain-Verification and configure our server with https://developer.apple.com/documentation/ApplePayontheWeb/setting-up-your-server We've downloaded the apple-developer-merchantid-domain-association.txt and update it on their respective locations, click 'ok' button but we get redirected to the main page of the information of the merchant, and it shows the domains without the extending period of time. No popup showing what has failed or what could be the reason of this error, we only get a redirection to the main page.

Hello, we are trying to extend the dates of verified domains following the docs of https://developer.apple.com/documentation/applepayontheweb/maintaining-your-environment#Renew-Your-Domain-Verification and configured the server following https://developer.apple.com/documentation/ApplePayontheWeb/setting-up-your-server we've download the apple-developer-merchantid-domain-association.txt and update them on their respective locations, click 'ok' button and we get redirected to the main page of the merchant certificate, but the expiration dates have not been extended, we can see on our web crawler that Apple Requested the file and it return a 200. No popup errors are shown, no console developer error we only get redirected to the merchant certificate information page.

We’ve integrated in-app card provisioning into our application. All required configurations have been completed, including: Token Service Provider (TSP) setup Certificates uploaded to the Apple Developer portal While the card is successfully added to the Wallet app, our application is currently unable to retrieve or read the added passes.

Hello! We use Apple's "master account" scheme to register new clients trough API due to the fact that the number of merchant IDs in a developer account cannot exceed 100 records. It's been almost a year since we successfully used the master account ( ex. "merchant.com.xxx") and register clients via Postman. At the moment, the certificates for the master merchant ID start to expire on July 11 which will affect all customers which is under Master ID. We know that when updating certificates at the identifier level(our master id), new universal identity certificate files that we use to send to the merchants (merchant_id.pem, privkey.key) will be generated for authentication on the merchant side, as well as a new keystore. Since many of our clients are integrated with current files and keystores and have live traffic, we would like to know—is it possible to update certificates on the master account without changing the keystores and certificate identities? The impossibility of this will entail a large gap when switching to new certificates. Thanks in advance for your answer.

Hello, On my website, I have a button to make a payment via Apple Pay. When I click on it, the Touch ID window opens correctly. However, when I place my finger on the Touch ID, I get a payment error. This issue only occurs in production mode. In sandbox mode, everything works perfectly. Here is a log file : log.txt Thank you in advance for your help.

We have verified our domain but if the file is removed from the deployed site after verification will this impact using ApplePaySession.applePayCapabilities in real time? We use that method from the JS api in our React app to determine whether or not to show the apple pay button. When that function is called in the browser, do the apple servers ping the https://our.domain.com/.well-known/apple-developer-merchantid-domain-association URL at that time? Or do they check for it periodically? The reason for asking is that with our many environments we wonder if we can verify each environment's domain by adding the file once. The file will be wiped out by our CICD process as it goes up the environment stack through our development workflow. Or do we need to maintain that file for each environment and add something to our build process?

We plan to set Manual PAN Entry Allowed = N and accept only issuer push provisioning (PKAddPaymentPass). Is there any Apple Pay programme rule that obliges us to keep MANUAL_ENTRY enabled? Will disabling it affect “Participating Issuer” listing?

My Raiffeisen ELBA-App doesnt work anymorw since i downloaded ios 26 beta 3 i cant open the app pls fix it because its my only banking app

Hello! We are using "Apple Pay Web Merchant Registration API" https://developer.apple.com/documentation/applepaywebmerchantregistrationapi Recently we successfully updated the Payment/identity certificates at our main merchant ID And we have a few questions: Do we need make the Domain verification for all of our sub-merchants again after the Certificates update? How we can check the expiration of domain verification of merchants that we integrate trough API endpoint (https://apple-pay-gateway.apple.com/paymentservices/registerMerchant), and do verified domains via API have an expiration date??? How we can understand does the our universal domain verification file (apple-developer-merchantid-domain-association) have expiration too? Thanks in advance!

We are developing a native iOS financial application called Tradu: Stocks, Forex, and CFDs (Apple ID: 6473443264), which embeds a WKWebView to render all user-facing logic. All user interactions—including authentication with MFA—occur inside this WKWebView. To access native functionality, we use postMessage() to communicate between the web and native layers. This approach has worked successfully for biometric authentication, for example. We are currently integrating Apple Pay In-App Provisioning and have a few questions regarding compliance with the documentation provided by our Issuer Host (Modulr). In the document titled Getting Started with Apple Pay: In-App Provisioning, Verification, Security, and Wallet Extensions (Version 4.0, February 2023), all examples are based on a fully native application. We’ve managed to integrate most of the In-App Provisioning flow via postMessage() up to the point of passing encryptedData to the Payment View. Apple Pay button inside WKWebView In Section 7: Frontend Overview, the user initiates the provisioning by tapping a native PKPaymentButton (SwiftUI example). In our case, this button is rendered inside the WKWebView, styled according to the Apple Style Guide. While the document references this approach as a “raw mark text supplement,” is this method acceptable and compliant with Apple’s UX and technical guidelines? MFA requirement before provisioning In Section 4: Security Guidelines, it is stated that the user must have passed MFA at least once before starting the provisioning flow. In our implementation, users must complete MFA on every login (including on recognized devices) before the provisioning UI becomes available. Even though this is not tied specifically to “unrecognized devices,” is our MFA requirement sufficient to satisfy Section 4.2? Summary: Is using a web-rendered Apple Pay button inside WKWebView (instead of a native PKPaymentButton) considered compliant? Is our MFA enforcement model (required on every login) aligned with the security requirements outlined in Section 4.2 of the Apple Pay In-App Provisioning documentation?

In the docs, I see a button type with label "Pay With [apple logo]. https://developer.apple.com/design/human-interface-guidelines/apple-pay Although I don't see this type as an option here: https://developer.apple.com/documentation/PassKit/PKPaymentButtonType Wondering if I'm looking in the right place and if this button type is still available?

We are trying to develop a coupon/offer code module where our app users can avail a free trail offer for 2 months period after applying the code. We already had a subscription module with monthly & yearly subscriptions with 7 day free trial period. Now, we want to implement a offer/coupon module, where, a user can either select monthly or yearly subscription, and upon entering the offer/coupon code, they will get 2 months free trial (or) a discount on the chosen subscription. (this will overwrite the existing 7 day free trial). We are confused on choosing the type of “offer/coupon” from AppStore connect. In App Store connect, we have introductory offers, promotional offer & Offer codes. Based on our requirements, we have done research and found that we cannot implement the offer code & promotional codes in the develop environment as there is no possibility to test in Sandbox environment. We observed that we need to push the app to App store and upon approval, we need to implement “offer/coupon” module. Can some one please suggest or guide us on choosing the best solution for our requirement? Thanks in advance.

Is there a way to make a subscription's auto-renewal fail in sandbox environment? Currently, I see no such options (screenshot)

Hi, I’ve been trying to integrate Apple Pay, but for some reason, the payment button is not showing up. The project is built with Laravel 11 and Vue. I imported the script as follows: <script crossorigin crossorigin src="https://applepay.cdn-apple.com/jsapi/1.latest/apple-pay-sdk.js" ></script> Then I added the following the steps: <style> apple-pay-button {{ --apple-pay-button-width: --apple-pay-button-width: 150px;; --apple-pay-button-height: --apple-pay-button-height: 30px;; --apple-pay-button-border-radius: --apple-pay-button-border-radius: 3px;; --apple-pay-button-padding: --apple-pay-button-padding: 0px 0px;; --apple-pay-button-box-sizing: border-box; } </style> <apple-pay-button buttonstyle="black" type="plain" locale="en-US"></apple-pay-button> I followed all the steps from the official Apple Pay demo: https://applepaydemo.apple.com/ I also configured the Content Security Policy (CSP) to allow all necessary resources. However, when I test my integration, the button doesn’t appear. I’ve checked the console, but there are no errors. At the same time, I have my certificate imported into the Keychain, and I’ve completed the entire process of creating both the certificate and the private key. However, when I try to validate the session using the certificate and key with Apple’s API, I get an error: 400 The SSL certificate error https://apple-pay-gateway-cert.apple.com/paymentservices/

I'm successfully using Apple subscriptions in my app, but I'm encountering SKErrorCodeDomain error 18 when trying to apply a subscription offer. I want apply offer code first time only for subscription. Below are details of what i set in appstore and what i have tested. Subscription Offer Details Offer Type: For the first month Customer Eligibility: New, Existing, and Expired Subscribers Code Status: Active Offer Code Creation Steps: App Store Connect → App → Subscription → Select Subscription Product → Offer Codes → Add → Add Custom Codes Signature Generation for Promotional Offers I'm following Apple's documentation to generate a signature: https://developer.apple.com/documentation/storekit/generating-a-signature-for-promotional-offers I’ve constructed the payload as instructed: appBundleId + '\u2063' + keyIdentifier + '\u2063' + productIdentifier + '\u2063' + offerIdentifier + '\u2063' + appAccountToken + '\u2063' + nonce + '\u2063' + timestamp Keys and Identifiers keyIdentifier, issuerId, and .p8 file are obtained from: App Store Connect → Users and Access → Integrations → In-App Purchase Test user created under: App Store Connect → Users and Access → Sandbox → Test Accounts Logged in with this account on the iPhone What I’ve Tried Verified all values used in the payload are correct Tried both seconds and milliseconds for the timestamp (as per documentation, it should be in milliseconds) Tried setting appAccountToken to: a valid UUID an empty string not setting it at all Used Apple’s sample code to generate a signature: https://developer.apple.com/documentation/storekit/generating-a-promotional-offer-signature-on-the-server Verified the generated signature locally, and it validated successfully: https://developer.apple.com/documentation/storekit/generating-a-signature-for-promotional-offers#Validate-locally-and-encode-the-signature Apple’s sample code to generate a signature Downloaded from const express = require('express'); const router = express.Router(); const crypto = require('crypto'); const ECKey = require('ec-key'); const secp256k1 = require('secp256k1'); const uuidv4 = require('uuid/v4'); const KeyEncoder = require('key-encoder'); const keyEncoder = new KeyEncoder('secp256k1'); const fs = require('fs'); function getKeyID() { return "KEYIDXXXXX"; } router.post('/offer', function(req, res) { const appBundleID = req.body.appBundleID; const productIdentifier = req.body.productIdentifier; const subscriptionOfferID = req.body.offerID; const applicationUsername = req.body.applicationUsername; const nonce = uuidv4(); const currentDate = new Date(); const timestamp = currentDate.getTime(); const keyID = getKeyID(); const payload = appBundleID + '\u2063' + keyID + '\u2063' + productIdentifier + '\u2063' + subscriptionOfferID + '\u2063' + applicationUsername + '\u2063'+ nonce + '\u2063' + timestamp; // Get the PEM-formatted private key string associated with the Key ID. // const keyString = getKeyStringForID(keyID); // Read the .p8 file const keyString = fs.readFileSync('./SubscriptionKey_47J5826J8W.p8', 'utf8'); // Create an Elliptic Curve Digital Signature Algorithm (ECDSA) object using the private key. const key = new ECKey(keyString, 'pem'); // Set up the cryptographic format used to sign the key with the SHA-256 hashing algorithm. const cryptoSign = key.createSign('SHA256'); // Add the payload string to sign. cryptoSign.update(payload); /* The Node.js crypto library creates a DER-formatted binary value signature, and then base-64 encodes it to create the string that you will use in StoreKit. */ const signature = cryptoSign.sign('base64'); /* Check that the signature passes verification by using the ec-key library. The verification process is similar to creating the signature, except it uses 'createVerify' instead of 'createSign', and after updating it with the payload, it uses `verify` to pass in the signature and encoding, instead of `sign` to get the signature. This step is not required, but it's useful to check when implementing your signature code. This helps debug issues with signing before sending transactions to Apple. If verification succeeds, the next recommended testing step is attempting a purchase in the Sandbox environment. */ const verificationResult = key.createVerify('SHA256').update(payload).verify(signature, 'base64'); console.log("Verification result: " + verificationResult) // Send the response. res.setHeader('Content-Type', 'application/json'); res.json({ 'keyID': keyID, 'nonce': nonce, 'timestamp': timestamp, 'signature': signature }); }); module.exports = router; Postman request and response Request URL: http://192.168.1.141:3004/offer Request JSON: { "appBundleID":"com.app.bundleid", "productIdentifier":"subscription.product.id", "offerID":"OFFERCODE1", "applicationUsername":"01234b43791ea309a1c3003412bcdaaa09d39a615c379cc246f5f479760629a1" } Response JSON: { "keyID": "KEYIDXXXXX", "nonce": "f98f2cda-c7a6-492f-9f92-e24a6122c0c9", "timestamp": 1753510571664, "signature": "MEYCIQCnA8UGWhTiCF+F6S55Zl6hpjnm7SC3aAgvmTBmQDnsAgIhAP6xIeRuREyxxx69Ve/qjnONq7pF1cK8TDn82fyePcqz" } Xcode Code func buy(_ product: SKProduct) { let discountOffer = SKPaymentDiscount( identifier: "OFFERCODE1", keyIdentifier: "KEYIDXXXXX", nonce: UUID(uuidString: "f98f2cda-c7a6-492f-9f92-e24a6122c0c9")!, signature: "MEYCIQCnA8UGWhTiCF+F6S55Zl6hpjnm7SC3aAgvmTBmQDnsAgIhAP6xIeRuREyxxx69Ve/qjnONq7pF1cK8TDn82fyePcqz", timestamp: 1753510571664) let payment = SKMutablePayment(product: product) payment.applicationUsername = "01234b43791ea309a1c3003412bcdaaa09d39a615c379cc246f5f479760629a1" payment.paymentDiscount = discountOffer SKPaymentQueue.default().add(payment) } Issue Even following instructions to the documentation and attempting various combinations, the offer keeps failing with SKErrorCodeDomain error 18. Has anyone else experienced this? Any suggestions as to what may be amiss or how it can be corrected?

Hi, I am the developer of this app and I was shared this receipt which strangely does not list my name as the merchant but instead says "The flow network" as you can see below: What is going on?

To perform the integration, it must be done under the same domain that has been validated. Is it not possible to do it in a local environment? Could that be the reason why I can't display the button or complete the validation with the API?

Hello, We are experiencing an issue with Apple Pay integration in our application. We are using WKWebView to handle various payment methods, but we are unable to complete payments via Apple Pay. Upon debugging the WKWebView, we received the following error message: "400 No required SSL certificate was sent" when attempting to process the payment. Currently, we are using a Let's Encrypt SSL certificate. Could you please confirm whether this certificate is suitable for Apple Pay, or if we should be using a different SSL certificate?

we are currently using the requestAutomaticPassPresentationSuppression API in my app. to prevent the Wallet interface from appearing when an NFC/RF reader is detected during active app usage. Recently, a new transit card supporting Express Mode (T-money Transit Card) was released in Korea, and we are seeing an increasing number of users enabling Express Mode. However, this has introduced an issue where users are unable to use the BLE-based functionality we provide via our widget. Specifically, when the user taps our widget, it triggers a BLE signal broadcast for approximately 10 seconds. In this scenario, when the user brings their iPhone close to our reader, Express Mode is activated before the BLE interaction can be established. This prevents the BLE signal from being successfully received and processed. We would like to ask: Is it possible to suppress Express Mode behavior (similar to requestAutomaticPassPresentationSuppression) even when the app is launched via a widget interaction? Alternatively, is there any way to delay or defer Express Mode activation temporarily when launching from a widget or during BLE communication? We would appreciate any guidance or best practices you can share regarding this scenario. Thank you.

During the development of our 3D game project, we encountered high memory usage requirements. To address this, we enabled Apple’s Extended Virtual Addressing (EVA) and Increased Memory Limit services. We have confirmed that both services were enabled in the developer backend as well as in Xcode, and we also used updated development and distribution certificates when building the app. However, in our validation process, it seems that EVA and Increased Memory Limit are not taking effect — the game still experiences memory overflow and crashes. Could you please advise: The correct steps to properly use Extended Virtual Addressing and Increased Memory Limit; How we can confirm whether these services are functioning as expected?