Hi, You're here because you've had issues with your implementation of Wallet Extensions for Apple Pay In-App Provisioning or In-App Verification. To prevent sending sensitive credentials in plain text, create a new report in Feedback Assistant to share the details requested below with the appropriate log profiles installed. Gathering Required Information for Troubleshooting Apple Pay In-App Provisioning or In-App Verification Issues While troubleshooting Apple Pay In-App Provisioning or In-App Verification, it is essential that the issuer is able to collect logs on their device and check those logs for error message. This is also essential when reporting issues to Apple. To gather the required data for your own debugging as well as reporting issues, please perform the following steps on the test device: Install the Apple Pay and Wallet profiles on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The bundle IDs App bundle ID Non-UI app extension bundle ID (if applicable) UI app extension bundle ID (if applicable) The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: Open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp (including timezone) of when the issue was reproduced. The type of provisioning failure (e.g., error at Terms & Conditions, error when adding a card, etc.) The issuer/network/country of the provisioned card (e.g., Mastercard – US) Last 4 digits of the FPAN Last 4 digits of the DPAN (if available) Was this test initiated from the Issuer App? (e.g., yes or no) The type of environment (e.g., sandbox or production) Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or bundle ID of your app or app extensions in the Console app. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay client. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your client, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

Hi, To ensure the issue is not caused by an error within your app or web service request, please review the Apple Pay Merchant Integration Guide. Additionally, please review the following technotes on Apple Pay: TN3173: Troubleshooting issues with your Apple Pay merchant identifier configuration TN3174: Diagnosing issues with the Apple Pay payment sheet on your website TN3175: Diagnosing issues with displaying the Apple Pay button on your website TN3176: Troubleshooting Apple Pay payment processing issues If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Apple Pay profile on your iOS or watchOS device. If the issue occurs on Mac, continue to Step 2. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device, or on macOS. Create a Feedback Assistant report with the following information: The serial number of the device. For iOS and watchOS: Open Settings > General > About > Serial Number (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > Serial Number. The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. For iOS and watchOS: open Settings > General > About > SEID (tap and hold to copy). For macOS: Open the Apple () menu > About This Mac > System Report > NVMExpress > Serial Number. The sysdiagnose gathered after reproducing the issue. The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or merchant domain in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Apple Pay website. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

I am adding In-App provisioning to my app. I am able to access the Apple Pay Sandbox and I have successfully tested adding a secure element/payment pass to Apple Wallet. However, once the pass has been added to the wallet, I can not access or retrieve the pass from my app. I have confirmed with the PNO that the PNO Pass Metadata Configuration in the testing environment include the correct metadata for "associatedApplicationIdentifiers" and "associatedStoreIdentifiers". Does anyone know why I am having this issue and how I can resolve it? Steps used to access pass in Apple Wallet I am unable to view the pass when I attempt to access it using the PKPassLibrary function as follows: let library = PKPassLibrary() if #available(iOS 13.4, *) { // This returns an empty array library.passes(of: .secureElement) } else { // This also returns an empty array library.passes(of: .payment) } // This returns an empty array too library.passes() Steps used to add pass to Apple Wallet These are the steps I follow to add the card: I create a PKAddPaymentPassRequestConfiguration I use this config to instantiate a PKAddPaymentPassViewController. I provide the nonce, nonceSignature, and certificates to my PNO along with the card data. I receive the activationData, encryptedPassData, and ephemeralPublicKey from my PNO and create a PKAddPaymentPassRequest using this data. I add the pass to Apple Wallet. In the addPaymentPassViewController callback, I am able to view the pass data from the .didFinishAdding pass: PKPaymentPass? variable. I am also able to see that the pass has been added from Apple Wallet app. I am not able to access the pass using PKPassLibrary().passes() at this point. I am not able to access the pass at any point after adding it either.

Can i use apple pay integration into my web iframe?In my situation, canMakePayment() returns null when i check browser support apple pay or not in Iframe

I've encountered an issue where we need multiple domain associations with separate Apple Pay implementations. Briefly, we have a /.well-known/apple-developer-merchantid-domain-association already setup with Stripe, and now we need another, different version of the file to get setup with FreedomPay. FreedomPay insists this file represents a three-way relationship between all parties and I have no reason to disbelieve them. I'm wondering if anyone has encountered this or if there is a standard procedure. I'm currently trying to find documentation on the exact way Apple Pay verification interacts with this file to see if we can produce it dynamically.

We are integrating iOS 16 recurring payments in our app, everything works fine but we have a few questions Question 1 let recurringPaymentRequest = PKRecurringPaymentRequest(         paymentDescription: "Pro Membership",         regularBilling: regularBilling,         managementURL: url       ) we assume managementURL is supposed to come in the user's wallet where he/she can tap to change the recurring payment option to our backend, but in the wallet, the transaction appears without this URL and have no indication that it is a recurring payment, Can someone guide what we missed Question 2 For apps that only have apple pay on mobile, managementURL can open the app as a deep link from the Wallet app and the user can update or delete the payment method for the automatic reload payment from the app directly, Question 3 For cancellation, the recurring payment app should have some UI where the user can tap which hit our backend and remove the apple pay merchant token from our system and apply cancellation business logic, no apple API involves in the cancellation of recurring payment

I'm encountering an issue with the Apple Pass Store card type backfield hyperlink not working when opened from double-clicking the power button. The value contains an HTML tag with a reference to our webpage. Everything works fine when we open it from the Wallet app, but the hyperlink doesn't seem to work when opened from the power button double-click. Has anyone else experienced this issue or have any suggestions for troubleshooting? Any help would be greatly appreciated. Thank you!

Hi, We are trying to make the PKAddPaymentPassViewController to show the correct list of devices to where the pass can be added. We have analysed the documentation and we are using the PrimaryAccountIdentifier field which is the field that supposedly controls this behavior but the list of devices presented in the view controller always include one iPhone and one Apple Watch, regardless of where the card has been already added. We are initializing the PKAddPaymentPassRequestConfiguration object with: PKEncryptionScheme PrimaryAccountIdentifier CardholderName PrimaryAccountSuffix LocalizedDescription PaymentNetwork PrimaryAccountIdentifier CardholderName PrimaryAccountSuffix LocalizedDescription We have also verified the configuration in our payment pass processor and everything should be ok. We would like to have some help on achieving the desired flow for Apple Pay, which is to present the PKAddPaymentPassViewController with the correct list of available devices and not the full list. Thank you.

Hello. we are looking in adding an additional verification method as part of our in app provisioning to apple wallet. the method is called app to app verification method where basically when the customer adds their card (debit or credit) on apple wallet they can be verified through a third party app. does apple support this? where can i find any material related to this?

I am trying to do a mass enablement of a merchant ids for a psp. The ids have been approved by apple. I am attempting to add more using the Post Request: https://apple-pay-gateway.apple.com/paymentservices/registerMerchant (https://developer.apple.com/documentation/applepaywebmerchantregistrationapi/register_merchant) but am always getting a Refuse to connect error. What authentication is required to get a 200 successful response?

We’ve an implementation of apple pay with asia pay as gateway . We want to access that from external iframe . although we’ve been able to load the apple pay widget not able to validate merchant and tokenize in iframe. Please let us know if apple pay with asia pay is available to be used within iframe.

The Shortcuts app offers the possibility to trigger shortcuts/intends when a wallet credit card is used and a new transaction is created. I would like to add transaction details to one of my apps and use such a shortcut for it. Other apps do the exact same thing, so this should not be a problem. Adding a shortcut to my app was not a big deal. However, how can this be tested on simulator? When trying to add a new automatization in the Shortcuts app using a wallet transaction as trigger I cannot finish the setup dialog since the Next button is disabled. I assume this is because no card is configured. When trying to add a card in Wallet I just receive that this was not successful. I have connected the simulator to a Sandbox Apple ID account using a region which supports Apple Pay (US). Using a real account does not solve the problem. Any idea how to get this working? Using real transaction within a store could obviously not be the solution for debugging.

I'm trying to upload my app with Tap to Pay on iPhone functionality. However, I'm getting error message "Profile doesn't include com.apple.developer.proximity-reader.payment.acceptance entitlement." I've confirmed many times that I have the distribution profile with this capability. Any idea what might be the issue? The development environment works perfectly.

Hello forum, Hope all is great! I have a shortcut automation which uses the transaction trigger. Since updating to ios 18 the transaction trigger does not work anymore. Whenever a transaction is done, the “Running your automation” notification does not show up and the automation does not work. To share with you the steps I’ve done so far: 1.Remove the automation and do it again 2.Remove the card from apple pay 3. Delete and install again the shortcut app 4. Turned on and off the phone I can confirm the automation works on my other iPhone with the latest version of IOS 17. Would really appreciate if anyone has any insights about that, or if this happened to you as well. Cheers! Dorin

Apple pay on checkout in iframe is working with test cards while in Private window. However when we go into normal browsing the Apple Pay button is greyed out. Real cards will ask for fingerprint and then decline with "Payment Not Completed". What is the issue?

Hi, I’m encountering an issue in my app’s Wallet Extension, specifically within the Non-UI Extension, where we are unable to retrieve payment passes bound to a user’s account. The same code that successfully retrieves these bound cards in the main app does not work when used in the Non-UI Extension. Case-ID: 8932090 Steps to Reproduce: Set up In-App Provisioning: Ensure that the app has the necessary In-App Provisioning permissions. This functionality works correctly in the main app, confirming that the permissions are properly configured. Configure Wallet Extensions: Follow the Wallet Extensions documentation to configure the app, including all required settings for the Non-UI Extension. Add Code to Retrieve Payment Passes: In the main app’s LoginView, implement the following code in the handleLogin() method to retrieve payment passes: // Get the identifiers of payment passes that already exist in Apple Pay. paymentPassLibrary = self.passLibrary.passes(of: .secureElement) for pass in paymentPassLibrary { if let identifier = pass.secureElementPass?.primaryAccountIdentifier { if pass.isRemotePass && pass.deviceName.localizedCaseInsensitiveContains("Apple Watch") { remotePassIdentifiers.insert(identifier) } else if !pass.isRemotePass { passIdentifiers.insert(identifier) } } } Verify Functionality in Main App: Run the app and verify that the code successfully retrieves the payment passes bound to the user’s account. Implement Code in Non-UI Extension: Add the same code to the Non-UI Extension, specifically in the WNonUIExtHandler class within the override func status(completion: @escaping (PKIssuerProvisioningExtensionStatus) -> Void) method. Test in Wallet Extension: Run the Wallet Extension and observe that the payment passes are not retrieved when the code is executed in the Non-UI Extension. Has anyone encountered a similar issue or can provide insight into why the code might not work in the Non-UI Extension compared to the main app? Support Information: iOS Version: 17.5.1 Development environment: Xcode 15.4 (15F31d), macOS 14.3 (23D56) Any help or suggestions would be greatly appreciated. Thank you!

I've implemented Push Provisioning, but am having trouble testing it. When I try to add a payment pass with my activationData, encryptedPassData, and ephemeralPublicKey, I see the "Add Card to Apple Pay" screen, but then when I click "Add Card", I get a "Could Not Add Card" message. When I inspect the error from didFinishAddingPaymentPass, it reads "The operation couldn’t be completed. (PKPassKitErrorDomain error 2.)". Is this error PKPassKitError.Code.unsupportedVersionError? What does this error means? Additional context: We use cordova-apple-wallet to generate certificates and add payment pass.

I am trying to find solutions past 4 days. but not getting any reference about NFC implementation in my app to read Debit/Credit card upon user consent? Can you confirm apple is provided any api for read Debit/Credit card using NFC or not. Tried with normal NFCReader but it reads only for normal tags but nothing with Visa/ MasterCard cards. Looking forward some help from you. Thanks

Hi, To ensure the issue is not caused by an error within your app or web service request, please review the following documentation: Wallet Passes Wallet Developer Guide If the resources above don’t help identify the cause of the error, please provide more information about your app or web services to get started. To prevent sending sensitive credentials in plain text, create a report in Feedback Assistant to share the details requested below. Additionally, if the error is something we need to investigate further, the appropriate engineering teams also have access to the same information and can communicate with you directly within Feedback Assistant for more information, as needed. Please follow the instructions below to submit your report. For issues occurring with your native app or web service, perform the following steps: Install the Wallet profile on your iOS or watchOS device. Reproduce the issue and make a note of the timestamp when the issue occurred, while optionally capturing screenshots or video. Gather a sysdiagnose on the same iOS or watchOS device. Create a Feedback Assistant report with the following information: The serial number of the device. Open Settings > General > About > Serial Number (tap and hold to copy). The SEID (Secure Element Identifier) of the device, represented as a HEX encoded string. Open Settings > General > About > SEID (tap and hold to copy). The sysdiagnose gathered after reproducing the issue. The .pkpass file(s), pass signing certificate(s) and pass type identiifier(s) (optional). The timestamp of when the issue was reproduced. Screenshots or videos of errors and unexpected behaviors (optional). Important: From the logs gathered above, you should be able to determine the cause of the failure from PassbookUIService, PassKit or PassKitCore, and by filtering for your SEID or pass type identifier in the Safari Web Inspector. See Inspecting Safari on macOS to learn more. Submitting your feedback Before you submit to Feedback Assistant, please confirm the requested information above is included in your feedback. Failure to provide the requested information will only delay my investigation into the reported issue within your Wallet pass implementation. After your submission to Feedback Assistant is complete, please respond in your existing Developer Forums post with the Feedback ID. Once received, I can begin my investigation and determine if this issue is caused by an error within your web implementation, a configuration issue within your developer account, or an underlying system bug. Cheers, Paris X Pinkney |  WWDR | DTS Engineer

I'm developing wallet extension for my app and using sandbox for testing. It was working properly on iOS 17, then I updated to iOS 18 and now the Wallet doesn't recognize my extension. It passes on 'status' method, but doesn't reach the 'passEntries' method. Does it have any solution?

I’m trying to test an AMEX card in the sandbox environment, but it’s not getting added. I have followed and verified the checks below to add the card to Wallet: Sandbox account is active. Sandbox user region is set to the US. Device region is also set to the US. AMEX card from the provided list is being added. Tested on iOS version 17.6.1 Devices tested include iPhone 13 and others. Steps followed to add the card to Wallet: Open Wallet and tap on "Add Card." Entered the required test data. Tapped "Agree" and waited. Received error: "Issuer does not support this card." Please let me know if you have any solutions.

I have implemented push provisioning, but I’ve encountered issues while testing it. I have tried with builds both in Xcode and TestFlight. According to the sysdiagnose, I can see the following: { statusCode = 500; statusMessage = 'Broker Service Response exception'; } I reported the error in Feedback Assistant: ID: FB15689064 (Error during the In-App Provisioning process)