I’m unable to notarize the executable and the .app — the status has been showing “In Progress” for over an hour. Upon checking the xcrun logs, it indicates that the submission ID was not received. I also noticed there’s an Apple Developer Service outage reported since October 8, 2025. Could you please let me know when this outage is expected to be resolved? It would be very helpful.

Hi everyone, My app notarization has been stuck in the “In Progress” state for the past 4 days. Here are the details: createdDate: 2025-10-12T07:56:46.228Z id: 8f8c9a33-1c72-489e-a189-74c797a12fbc name: DevScribe.zip status: In Progress I checked the Apple System Status page and noticed that the Developer Notarization service has been showing an outage since October 8th. Could this ongoing outage be the reason my notarization is stuck? Is anyone else experiencing the same issue? Any guidance or workaround would be greatly appreciated.

The problem is the following: We create a keychain item called NotaryTool (There are multiple accounts that use Notary tool and we created it for all of them ) This is created in the following way: $ xcrun notarytool store-credentials This process stores your credentials securely in the Keychain. You reference these credentials later using a profile name. Profile name: NotaryTool We recommend using App Store Connect API keys for authentication. If you'd like to authenticate with an Apple ID and app-specific password instead, leave this unspecified. Path to App Store Connect API private key: //AuthKey_ABCDEFGH.p8 App Store Connect API Key ID: <ABCDEFGH> App Store Connect API Issuer ID: ABCDEF-ABCD-1234-1234-1234567 Validating your credentials... Success. Credentials validated. Credentials saved to Keychain. To use them, specify `--keychain-profile "NotaryTool"` The key is downloaded from Apple and some other IDs are provided alongside. These should remain in the keychain for as long as the user process is running (just like any other process) A few runs are successful when we run with the profile that was created. After a few runs we start seeing a failure. Now we are seeing the following issue where the keychain item just vanishes: Error: No Keychain password item found for profile: NotaryTool\n\nRun 'notarytool store-credentials' to create another credential profile.\nError during the not process\nTue Aug 26 06:02:09 2025 Notarization failed with notarytool with exit code 17664: \nTue Aug 26 06:02:09 2025 could not upload for notarization!!!

Hello Colleagues, We have been seeing a delay in our Apple notarization submission that hangs for hours "in progress" without completing: This issue has been occurring since Friday, October 17th. We have also checked the Apple System Status page and there is no indication of any outage for Apple notarization.

Hello Quinn and Apple Developer Support, We are encountering an issue where our notarization queue appears to be stuck, and we would greatly appreciate your help. A few days ago, we assisted another team by submitting their app for notarization using our own Apple Developer account, because their own notarization attempts were getting stuck. However, the submission we made for them under our account has now been stuck in the “In Progress” state for about 5 days. Later, their own submission (using their account) was rejected after 2–3 days, but our submission for them (under our account) has never completed. Since then, all our subsequent notarization requests have also remained “In Progress”, which strongly suggests that the stuck submission is blocking our entire notarization queue. Here are the details from our submission history: xcrun notarytool history --apple-id "xxx" --team-id "xxx" --password "xxx" Partial results: id: 0bafa66f-4f47-4327-811f-a05481be5d0b status: In Progress id: 2d00b75a-a17a-44fc-afa1-71e0e39ec2cd status: In Progress The first ID is our own app’s submission. The second ID belongs to the submission we made for the other team. Both have been stuck in “In Progress” for several days, which seems abnormal. Could you please help us clear or reset the notarization queue for our account so that we can continue submitting our own apps? Thank you very much for your time and assistance! Best regards, gongcj

Hi everyone, I’m trying to notarize a macOS app for direct distribution in Xcode. The upload finished, but the notarization has been stuck on “In Progress” for hours. I’m not getting any emails or errors, and the status log in Organizer only shows the same “In Progress” message without any extra details. I tried reopening Organizer and creating a new archive, but it always ends up in the same state. Is this normal, or is there something I should check on my side? Any help would be appreciated. Thanks!

Hi Team, i'm running into same issue with notarization time. I create new, small app for a customer but however the notarization is running since this morning, so almost a few hours. This isn't normal or ? Is there anything what i can do ? Best regard, Lars

I want to distribute a macOS application created with Electron to third parties, but I am currently unable to do so because the code signing is not working correctly. From the following response, it appears that the code signing itself was successful: $ codesign -dvvv dist/mac-arm64/AnySticky.app Executable=/Users/myname/dev/electron-tutorial/dist/mac-arm64/AnySticky.app/Contents/MacOS/AnySticky Identifier=com.electron.electron-tutorial Format=app bundle with Mach-O thin (arm64) CodeDirectory v=20500 size=778 flags=0x10000(runtime) hashes=13+7 location=embedded Hash type=sha256 size=32 CandidateCDHash sha256=e105ecd3c2051554239df404c185f00fca5900de CandidateCDHashFull sha256=e105ecd3c2051554239df404c185f00fca5900de742e572c154aa889e9929186 Hash choices=sha256 CMSDigest=e105ecd3c2051554239df404c185f00fca5900de742e572c154aa889e9929186 CMSDigestType=2 CDHash=e105ecd3c2051554239df404c185f00fca5900de Signature size=9083 Authority=Apple Development: MY NAME (66MDM239Z8) Authority=Apple Worldwide Developer Relations Certification Authority Authority=Apple Root CA Timestamp=Dec 18, 2024 at 20:26:03 Info.plist entries=30 TeamIdentifier=9C8S7XP2UN Runtime Version=14.0.0 Sealed Resources version=2 rules=13 files=11 Internal requirements count=1 size=192 However, when I attempt to notarize the app, I receive an error stating that the app is not signed with a valid Developer ID certificate: $ xcrun notarytool submit dist/mac-arm64/AnySticky.zip --keychain-profile "AnySticky" --wait Excerpt from the error message: { "severity": "error", "code": null, "path": "AnySticky.zip/AnySticky.app/Contents/MacOS/AnySticky", "message": "The binary is not signed with a valid Developer ID certificate.", "docUrl": "https://developer.apple.com/documentation/security/notarizing_macos_software_before_distribution/resolving_common_notarization_issues#3087721", "architecture": "arm64" }, { "severity": "error", "code": null, "path": "AnySticky.zip/AnySticky.app/Contents/Frameworks/AnySticky Helper (Renderer).app/Contents/MacOS/AnySticky Helper (Renderer)", "message": "The binary is not signed with a valid Developer ID certificate.", "docUrl": "https://developer.apple.com/documentation/security/notarizing_macos_software_before_distribution/resolving_common_notarization_issues#3087721", "architecture": "arm64" }, ... I would greatly appreciate any guidance on how to resolve this issue. Thanks.

I'm having issues with notarizing my Electron app using electron-builder. The build process works, but notarization gets hung up on submitting to Apple. Versions electron: 33.2.1 electron-builder: 24.9.1 @electron/notarize: 2.3.2 macOS runner: macos-latest Current Setup Using GitHub Actions for CI/CD Developer ID Application certificate is properly installed and verified Apple ID credentials are confirmed working (verified via altool) Notarization is configured in both package.json and build arguments Logs 2024-12-29T18:56:37.198Z electron-notarize:spawn spawning cmd: xcrun args: [ '--find', 'notarytool' ] opts: {} 2024-12-29T18:56:38.652Z electron-notarize:spawn cmd xcrun terminated with code: 0 2024-12-29T18:56:38.653Z electron-notarize:notarytool starting notarize process for app: /Users/runner/work/***/***/dist/mac-arm64/***.app 2024-12-29T18:56:38.653Z electron-notarize:helpers doing work inside temp dir: /var/folders/95/0ydz4d79163427j3k5crp3fh0000gn/T/electron-notarize-KxNa7e 2024-12-29T18:56:38.653Z electron-notarize:notarytool zipping application to: /var/folders/95/0ydz4d79163427j3k5crp3fh0000gn/T/electron-notarize-KxNa7e/***.zip 2024-12-29T18:56:38.654Z electron-notarize:spawn spawning cmd: ditto args: [ '-c', '-k', '--sequesterRsrc', '--keepParent', '***.app', '/var/folders/95/0ydz4d79163427j3k5crp3fh0000gn/T/electron-notarize-KxNa7e/***.zip' ] opts: { cwd: '/Users/runner/work/***/***/dist/mac-arm64' } 2024-12-29T18:56:47.906Z electron-notarize:spawn cmd ditto terminated with code: 0 2024-12-29T18:56:47.906Z electron-notarize:notarytool zip succeeded, attempting to upload to Apple 2024-12-29T18:56:47.906Z electron-notarize:spawn spawning cmd: xcrun args: [ 'notarytool', 'submit', '/var/folders/95/0ydz4d79163427j3k5crp3fh0000gn/T/electron-notarize-KxNa7e/***.zip', '--apple-id', '*********', '--password', '*********', '--team-id', '*********', '--wait', '--output-format', 'json' ] opts: {} This is the farthest I've been able to get after pushing through many errors.. I set a timeout of 3 hours and this will now be my 4th time attempting I believe. Configuration package.json json "mac": { "hardenedRuntime": true, "gatekeeperAssess": false, "entitlements": "build/entitlements.mac.plist", "entitlementsInherit": "build/entitlements.mac.plist", "notarize": { "teamId": "APPLE_TEAM_ID WAS MANUALLY PUT HERE AFTER ISSUES WITH SECRETS" } } GitHub Actions Workflow Using samuelmeuli/action-electron-builder@v1 with proper environment variables for APPLE_ID, APPLE_TEAM_ID, and APPLE_APP_SPECIFIC_PASSWORD. What I've Tried Verified Apple Developer account access and Team ID Confirmed certificate installation works Tested credentials using altool (successfully lists providers) Added explicit notarization environment variables Any help would be appreciated!

Hi at all, we started a notarization process and after 3 hours is still in progress.

I have built a flutter desktop app and I notarized it. I have to distribute it directly as I cannot turn on App Sandboxing due to the functions included in the application. I created a build of the app from Xcode and then uploaded it for notarization and it was successfully notarized. If I compress that app into a .zip and share it over the internet, it successfully opens on any computer. But when I create a dmg using appdmg from npm and I try to distribute it, it does not open and shows me the option to either move to bin or cancel. When I notarize the dmg using the command: xcrun notarytool submit "YourApp.dmg" --apple-id "email" --password "app-specific-password" --team-id "YOUR_TEAM_ID" --wait It notarizes successfully. I have also done: xcrun stapler staple "YourApp.dmg" And validated it but it does not seem to work when I distribute it over the internet by uploading on my website. It is a bit strange that when I distribute the notarized app, it does not show any error when distributed over the internet by uploading on my website and then downloading but for a notarized dmg, which is properly signed, it gives that error that wether move to bin or do nothing. Would love someone's help on this!

Hello Apple Developer Community, I’m encountering an issue where my macOS app (signed with a valid ‘Developer ID Application’ certificate and accepted by Apple’s notary service) fails when I attempt to staple the notarization ticket. The Apple notary service reports ‘Accepted’ each time, but xcrun stapler staple always returns Error 65, with the local check (spctl -a -vvv) showing ‘Unnotarized Developer ID.’ Here are some key points: Certificate: I have a valid ‘Developer ID Application’ certificate (unexpired) in my login and system keychains, with Apple’s intermediate certificates also installed and set to System Defaults or Always Trust. Notarization: Regardless of whether I submit a .zip of the .app or the final .dmg for notarization, notarytool reports ‘Accepted.’ Stapling: xcrun stapler staple (or notarytool staple) on the exact file I uploaded fails with Error 65, claiming it can’t validate the downloaded ticket. Environment Checks: Checked for duplicate or outdated certificates—only one Developer ID remains. Repeated on multiple code-signed builds (both .app and .dmg) with the same result. Manually tested code-signing the .app with entitlements (for the hardened runtime) and then signing the .dmg without entitlements. Logs: The relevant excerpt from stapler indicates “Could not validate ticket for [app]. The staple and validate action failed! Error 65,” even though Apple’s notary service claims success. Could you please advise any additional troubleshooting steps or possible causes for local validation failure after a successful notarization? I’ve already ensured the environment is up to date with valid intermediates, only one Developer ID certificate. Any insight on diagnosing ticket mismatch or known tool bugs with Error 65 would be appreciated. Thank you!

I have an app that only crashes once it's been notarised. I read a few posts that essentially said before trying to identify issues by reviewing the crash report I should ensure signing and notarisation has happened correctly. I've worked through the document "Resolving common notarization issues" spctl -vvv --assess --type exec: gives no errors and correctly returns my developer id. codesign -dvv: returns a timestamp My app uses a hardened runtime. My app shows up in Xcode as a macOS Archive (e.g not a Generic Xcode Archive) Here is the crash report. Translated Report (Full Report Below) Process: Scene Finder [44479] Path: /Users/USER/Downloads/Scene Finder.app/Contents/MacOS/Scene Finder Identifier: Version: 0.9 (20250206.1) Code Type: ARM-64 (Native) Parent Process: launchd [1] User ID: 501 Date/Time: 2025-02-11 13:09:03.7786 +1000 OS Version: macOS 15.3 (24D60) Report Version: 12 Anonymous UUID: EE8B1269-0A8A-3AB6-516B-C752E8A18B5A Sleep/Wake UUID: 436CD7CF-7B13-4A9C-9425-7EF94CC007A9 Time Awake Since Boot: 98000 seconds Time Since Wake: 9524 seconds System Integrity Protection: enabled Crashed Thread: 0 Dispatch queue: com.apple.main-thread Exception Type: EXC_CRASH (SIGABRT) Exception Codes: 0x0000000000000000, 0x0000000000000000 Termination Reason: Namespace SIGNAL, Code 6 Abort trap: 6 Terminating Process: Scene Finder [44479]

I'm about at my wit's end trying to figure out why I can sign and notarize code, but am unable to staple the notarization, no matter what I do. I've reinstalled Xcode, reinstalled certificates, and tried about every suggestion that I can find, but still no luck. 2023 M3 MacBook Pro, OS X 15.3.1, Xcode 16.2. I have created a very basic Xcode app to test this with. I am building the project: codegen generate && xcodebuild -project SimpleNotarizationTest.xcodeproj -scheme SimpleNotarizationTest -configuration Release clean build (see attached file for build log) build-log.txt The signature and entitlements verify: codesign -d --entitlements :- ~/Library/Developer/Xcode/DerivedData/SimpleNotarizationTest-*/Build/Products/Release/SimpleNotarizationTest.app Output: Executable=/Users/minter/Library/Developer/Xcode/DerivedData/SimpleNotarizationTest-ecqihdiubptfnldimmjgnqpjr xun/Build/Products/Release/SimpleNotarizationTest.app/Contents/MacOS/SimpleNotarizationTest warning: Specifying ':' in the path is deprecated and will not work in a future release <?xml version="1.0" encoding="UTF-8"?><!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "https://www.apple .com/DTDs/PropertyList-1.0.dtd"><plist version="1.0"><dict><key>com.apple.security.app-sandbox</key><true/><k ey>com.apple.security.files.user-selected.read-only</key><true/></dict></plist> I created a zip file: ditto -c -k --keepParent ~/Library/Developer/Xcode/DerivedData/SimpleNotarizationTest-*/Build/Products/Release/SimpleNotarizationTest.app SimpleNotarizationTest.zip I submitted the app for notarization and it was approved: xcrun notarytool submit SimpleNotarizationTest.zip --apple-id "$APPLE_ID" --password "$APPLE_APP_SPECIFIC_PASSWORD" --team-id "$APPLE_TEAM_ID" --wait Output: Conducting pre-submission checks for SimpleNotarizationTest.zip and initiating connection to the Apple notary service... Submission ID received id: d2c0d6b0-cd55-4fa6-b958-09767d562a33 Upload progress: 100.00% (23.6 KB of 23.6 KB) Successfully uploaded file id: d2c0d6b0-cd55-4fa6-b958-09767d562a33 path: /Users/minter/tmp/simple-app-stapling/SimpleNotarizationTest.zip Waiting for processing to complete. Current status: Accepted......... Processing complete id: d2c0d6b0-cd55-4fa6-b958-09767d562a33 status: Accepted I attempt to staple the app: xcrun stapler staple -v ~/Library/Developer/Xcode/DerivedData/SimpleNotarizationTest-*/Build/Products/Release/SimpleNotarizationTest.app And it fails. See verbose stapling log. verbose-stapling-log.txt The top line is that it finds and downloads the ticket, but can't/won't staple. Downloaded ticket has been stored at file:///var/folders/dd/cgm9_v3n399_zqqsphgzs5jh0000gn/T/1b7cb7d8-9a9e-462c-831b-09de1b896d9e.ticket. Could not validate ticket for /Users/minter/Library/Developer/Xcode/DerivedData/SimpleNotarizationTest-ecqihdiubptfnldimmjgnqpjrxun/Build/Products/Release/SimpleNotarizationTest.app The staple and validate action failed! Error 65. Wade-Minter~/tmp/simple-app-stapling(:|✔) % From my debugging, I can say: The code signature appears valid and includes a secure timestamp from Feb 23, 2025 The app is properly signed with Developer ID Application The notarization ticket is being successfully retrieved from Apple's servers (as shown in the verbose output) The ticket is being downloaded to a temporary location, but the stapler is failing to validate it with error 65 The app bundle structure appears complete with all required components The CDHash matches between the code signature and the notarization ticket: 604544b32d7074dd77e2e6f2070f6e2d41f6368d If I run: spctl -a -vv ~/Library/Developer/Xcode/DerivedData/SimpleNotarizationTest-*/Build/Products/Release/SimpleNotarizationTest.app The output is: Wade-Minter~/tmp/simple-app-stapling(:|✔) % spctl -a -vv ~/Library/Developer/Xcode/DerivedData/SimpleNotarizationTest-*/Build/Products/Release/SimpleNotaspctlionTest.app /Users/minter/Library/Developer/Xcode/DerivedData/SimpleNotarizationTest-ecqihdiubptfnldimmjgnqpjrxun/Build/Products/Release/SimpleNotarizationTest.app: rejected source=Unnotarized Developer ID origin=Developer ID Application: Fourth Line LLC (6U2KJ5KDT4) To summarize: The app is being recognized as "Unnotarized Developer ID" despite successful notarization The stapler is able to retrieve the ticket but fails during validation The error code 65 consistently appears during stapling attempts All code signing and bundle integrity checks pass The notarization ticket is being successfully downloaded but not successfully attached Any insight will be appreciated, since I've exhausted every option that I can find.

Hello everyone, I’m currently developing an Electron application, and I’m trying to properly sign and notarize it for macOS. The notarization process itself seems to complete successfully—the file is accepted without issues. However, when I attempt to staple the notarization ticket to the executable, I consistently get Error 65 with TheStableAndValidateActionFailed. The issue is puzzling because the executable does not change at any point during the process. After facing this issue multiple times in my own project, I decided to test it on a more controlled setup. I followed the steps from this https://www.youtube.com/watch?v=hYBLfjT57hU and the instructions from this macos-code-signing-example which have previously worked for others. Yet, even with this setup, I still get the same Error 65. Below, I have attached the verbose logs for reference. I’m trying to understand what could be causing this issue—whether it’s related to certificates, the signing process, or something else entirely. Has anyone encountered a similar problem, and if so, how did you resolve it? Any insights would be greatly appreciated!

Hi, I have an account that is only a few days old. My first notary went smooth and was done within minutes. Every subsequent notary has been stuck pending. The oldest one being a day or so.

Hey everyone, I've been trying to notarize my Electron macOS app for the past two days without any success. My longest attempt took nearly 4 hours, and my current attempt has already been running for 2 hours and 26 minutes. From what I can see in the logs, the signing step has completed successfully, and the app is currently in the notarization stage. But it's been stuck there with no real updates or progress indicators. Is this kind of delay normal? Has anyone else experienced such long notarization times? Any help or insight would be greatly appreciated! Thanks in advance.

I started the notarization process for my electron app (just a browser window loading a URL) yesterday (26/03/2025) at around 05:23 GMT. I noticed in a couple of posts here in the forum that it may sometimes take a day to notarize the first app submitted by a team, but it has been over 30 hours now. Here's the log from xcrun notarytool history. createdDate: 2025-03-26T05:23:11.102Z id: ddcb3fca-4667-4acb-8fd1-3298a7c244cc name: xolock-browser.zip status: In Progress Do help me out here, I have zero idea why this is taking so long. Thanks in advance!

I have been trying to notarize my application for about a month via this command - xcrun notarytool submit "Backlsh.zip" --apple-id "" --password "" --team-id "" but it throws error - { "logFormatVersion": 1, "jobId": "c8173ee6-edd2-4c51-a86b-8f3b8dea0a84", "status": "Rejected", "statusSummary": "Team is not yet configured for notarization. Please contact Developer Programs Support at developer.apple.com under the topic Development and Technical / Other Development or Technical Questions.", "statusCode": 7000, "archiveFilename": "Backlsh.zip", "uploadDate": "2025-03-06T05:33:56.287Z", "sha256": "b45e579f0c47070b55d74ac49e49c81d32f2315bd290ca5592f71f314018c44d", "ticketContents": null, "issues": null } I have raised ticket to apple support but i havent received any help yet ! I have tried to submit 5 times. Kindly help !

Hi All. I'm having a notarization issue trying to get a product built. Starting around the beginning of April, I have a notarization process failing every time with an invalid server certificate. The returned error is: Error: HTTPError(statusCode: nil, error: Error Domain=NSURLErrorDomain Code=-1202 "The certificate for this server is invalid. You might be connecting to a server that is pretending to be “notary-artifacts-prod.s3.amazonaws.com” which could put your confidential information at risk." UserInfo={NSLocalizedRecoverySuggestion=Would you like to connect to the server anyway?, _kCFStreamErrorDomainKey=3, NSErrorPeerCertificateChainKey=( "<cert(0x107810200) s: *.s3.amazonaws.com i: Amazon RSA 2048 M01>", "<cert(0x107810c00) s: Amazon RSA 2048 M01 i: Amazon Root CA 1>", "<cert(0x107811400) s: Amazon Root CA 1 i: Starfield Services Root Certificate Authority - G2>", "<cert(0x107811c00) s: Starfield Services Root Certificate Authority - G2 i: Starfield Class 2 Certification Authority>" The problem certificate appears to be "Amazon RSA 2048 M01" which appears to be expired. The error fires in response to an 'xcrun notarytool log' command. The initial ' xcrun notarytool submit' has already worked. The build server in this case is running Jenkins, with a Makefile driven notarization stage. It all worked perfectly until a build on April 3rd, all builds have failed since. I have tried using '--no-s3-acceleration'. But that fails even faster with: Conducting pre-submission checks for ICFA.zip and initiating connection to the Apple notary service... Submission ID received id: d50a2157-7acb-4bd6-b1d1-6d0b1d52d5c9 Error: The operation couldn’t be completed. (Network.NWError error 2.) Any help or suggestions would be appreciated. Right now I have folks needing a valid build. Thanks in advance.