I have noticed a problem when a PHAsset creation request is made with the resource type PHAssetResourceType.photoProxy. let creationRequest = PHAssetCreationRequest.forAsset() creationRequest.addResource(with: .photoProxy, data: photoData, options: nil) creationRequest.location = location creationRequest.isFavorite = true After successfully saving the resulting asset through PHPhotoLibrary.shared().performChanges, I could verify it in the Photos app. I noticed that the created photo was initially marked as Favorite and that the location was added to the info as expected. The title of the image changes from "Today" to "" too. Next, the photo was refreshed, and location data was purged. However, the title remains unchanged and displays the . This refresh was also observed in the code. PHPhotoLibraryChangeObserver protocols func photoLibraryDidChange(_ changeInstance: PHChange) receives a change notification. The same asset has been changed, and there is no location information anymore. isFavorite information persists correctly. After debugging for a few hours, I discovered that changing the resource type to .photo fixes this issue. Location data is not removed in the Photos app, and no refresh callback is seen in func photoLibraryDidChange(_ changeInstance: PHChange). I initially used .photoProxy because in the AVCapturePhotoCaptureDelegate implementation class, I always get the call in func photoOutput(_ output: AVCapturePhotoOutput, didFinishCapturingDeferredPhotoProxy deferredPhotoProxy: AVCaptureDeferredPhotoProxy?, error: Error?). So here is where I am capturing the photo data as photoData = deferredPhotoProxy?.fileDataRepresentation().

A very common use case in our iOS app is that users take a large number of pictures (about 30) in low-light conditions using the camera app, and immediately after, they try to upload them to our servers. We measured the time to load photos from the PHPickerResult. For most photos, it takes less than 100 milliseconds, but for some of them, it takes several seconds—we even saw minutes in some extreme cases. We believe this started happening with iOS 17, when deferred photo processing was introduced. If users take the pictures using our in-app camera experience, the options to customize the camera are enough to avoid the long waiting times. However, the majority of our users still prefer to take the photos with the camera app, and there is little we can do about that. In the past few weeks, we tried many combinations: Without asking for permissions, we tried loadFileRepresentation, loadData, and loadObject. We explored the PHImageManager route, asking permissions and with different options for deliveryMode, resizeMode, version, isSynchronous, and allowSecondaryDegradedImage. We also tried fetching the photos in parallel, with very bad results. In summary, nothing helped the long waiting times—minutes in some cases. The first question is then, is there anything we can do to ignore the post-processing of the photos and get them fast? We could accept the unprocessed images. At a minimum, we would like to show our users what we are doing and why we are taking so much time. We tried to load thumbnails with loadPreviewImage and put a progress indicator on top. This method consistently gives us an error for all photos: (lldb) p error.localizedDescription (String) "Cannot load preview." We can load thumbnails with the PHImageManager option, but it seems excessive to need to get permissions only for that. Second question would be then, what can we do to load thumbnails without asking for permission? I created a feedback report with a video and sample code to reproduce -> FB15493683

Hello! I'm getting crash reports in PHPickerViewController for iOS 17 users only. Can someone point me into the right direction what could be the root cause in my case since it's related to PHPickerViewController? Thread 0 name: Thread 0 Crashed: 0 libsystem_kernel.dylib 0x00000001e7e9342c __pthread_kill + 8 (:-1) 1 libsystem_pthread.dylib 0x00000001fbc32c0c pthread_kill + 268 (pthread.c:1721) 2 libsystem_c.dylib 0x00000001a6d36ba0 abort + 180 (abort.c:118) 3 PhotoFoundation 0x00000001d2420280 -[PFAssertionPolicyAbort notifyAssertion:] + 68 (PFAssert.m:432) 4 PhotoFoundation 0x00000001d2420068 -[PFAssertionPolicyComposite notifyAssertion:] + 160 (PFAssert.m:259) 5 PhotoFoundation 0x00000001d242061c -[PFAssertionPolicyUnique notifyAssertion:] + 176 (PFAssert.m:292) 6 PhotoFoundation 0x00000001d241f7f4 -[PFAssertionHandler handleFailureInFunction:file:lineNumber:description:arguments:] + 140 (PFAssert.m:169) 7 PhotoFoundation 0x00000001d2420c74 _PFAssertFailHandler + 148 (PFAssert.m:127) 8 PhotosUI 0x0000000216b59e30 -[PHPickerViewController _handleRemoteViewControllerConnection:extension:extensionRequestIdentifier:error:completionHandler:] + 1356 (PHPicker.m:1502) 9 PhotosUI 0x0000000216b5a954 __66-[PHPickerViewController _setupExtension:error:completionHandler:]_block_invoke_3 + 52 (PHPicker.m:1454) Crash report: 2024-09-05_18-27-56.7526_+0500-a953eaee085338a690ac1604a78de86e3e49d182.crash

Hello developer community. I purchase recently my new iPhone 16 Pro Max; it is a premium device with great quality overall. However, I am having a big trouble shotting in ProRaw MAX (48 mode) with native camera. Just to be clear, the problem that i will describe do not happen in 3rd apps, such as ProCam; only with native camera. When I use ProRaw Max, and take the photo, and watch the photo in the gallery the image can’t load and render properly. Even, when I maximize the image to the maximum I can see pixelated portions, defects and super low resolution and excessive denoise. For comparison, this not occur with my previous iPhone 15 PM and/or when I capture photos from ProCam (same settings and configurations) in the 16PM. I proceed to take the photo, open the gallery and I see full of details, when zoomed to 100%. I tried to format the phone, reinstall the software via my mac. Tried even to look at some forums to find if there’s someone with the same issue, the information available so far is very low. I’m in contact with apple assistant from my country (Portugal), and they escalated this problem to the engineers. (that’s what I’ve been told). They did all the tests remotely (via analysis and improvement’s) and they told me that my phone is perfect in the hardware department. I will wait for the next days to be contacted again. I’m on iOS 18.0.1. (The last software available at this time). I tried multiple 16PM, from friends, family and stores (more or less 10 units), and they all showed the exact same problematic. I’m a professional photographer, so I find this frustrating and unacceptable. I would appreciate any additional suggestion or information. Thank you! Cannot add photos or files because they are bigger than 5Mb.

Hey, I have an app that user selects wallpaper for iPhone. I want a feature that user can set wallpaper direct from app itself for lock screen and home screen not download the image and manually set the wallpaper. As my research there was a PhotoLibrary api that contains PLWallpaperImageViewController.h which allows you to set wallpaper directly. Thank You!

In a photo editing extension, is it possible to display the photo in HDR? In this context you only have a placeholder UIImage and a PHContentEditingInput which has a displaySizeImage and fullSizeImageURL. The displaySizeImage has isHighDynamicRange false.

I'm updating my Photo Editing Extension to support HDR. To do this I set imageView.preferredImageDynamicRange = .high. But you can turn off the option to view HDR photos in the complete dynamic range in Settings > Photos. When you do that, open a photo, and tap the edit button, it does not appear in the full range as expected, but when you select my app from More > Extensions, it does appear in the complete dynamic range unexpectedly. I need to set imageView.preferredImageDynamicRange = .standard when View Full HDR is off, but I don't see any way to get that in my PHContentEditingController.

[[PHImageManager defaultManager] requestAVAssetForVideo:asset options:videoOptions resultHandler:^(AVAsset *_Nullable avAsset, AVAudioMix *_Nullable audioMix, NSDictionary *_Nullable info) { if ([avAsset isKindOfClass:[AVURLAsset class]]) { AVURLAsset *urlAsset = (AVURLAsset *)avAsset; NSURL *videoURL = urlAsset.URL; mediaInfo[@"path"] = videoURL.absoluteString; } else { // Failed to get video asset completion(nil); } }];``` Before iOS 18, i could able access AVAsset video using the method mentioned above with the url, but starting from the iOS 18 version, the following error appears 'You don’t have permission. - The AVPlayerItem instance has failed with the error code 257 and domain "NSCocoaErrorDomain".'

I am building an app about photos and I want to create a photo sharing feature like Apple's Photos App. Please see Steps to Reproduce and attached project. The current share method has the following issues The file name of the shared photo changes to “FullSizeRender”. The creation and update dates of shared photos will change to the date they were edited or shared. I want to ensure that the following conditions are definitely met Share the latest edited version. The creation date should be when the original photo was first created. How can I improve the code? STEPS TO REPRODUCE class PHAssetShareManager { static func shareAssets(_ assets: [PHAsset], from viewController: UIViewController, sourceView: UIView) { let manager = PHAssetResourceManager.default() var filesToShare: [URL] = [] let group = DispatchGroup() for asset in assets { group.enter() getAssetFile(asset, resourceManager: manager) { fileURL in if let fileURL = fileURL { filesToShare.append(fileURL) } group.leave() } } group.notify(queue: .main) { self.presentShareSheet(filesToShare, from: viewController, sourceView: sourceView) } } private static func getAssetFile(_ asset: PHAsset, resourceManager: PHAssetResourceManager, completion: @escaping (URL?) -> Void) { print("getAssetFile") let resources: [PHAssetResource] switch asset.mediaType { case .image: if asset.mediaSubtypes.contains(.photoLive) { // let editedResources = PHAssetResource.assetResources(for: asset).filter { $0.type == .fullSizePairedVideo } // let originalResources = PHAssetResource.assetResources(for: asset).filter { $0.type == .pairedVideo } let editedResources = PHAssetResource.assetResources(for: asset).filter { $0.type == .fullSizePhoto } let originalResources = PHAssetResource.assetResources(for: asset).filter { $0.type == .photo } resources = editedResources.isEmpty ? originalResources : editedResources } else { let editedResources = PHAssetResource.assetResources(for: asset).filter { $0.type == .fullSizePhoto } let originalResources = PHAssetResource.assetResources(for: asset).filter { $0.type == .photo } resources = editedResources.isEmpty ? originalResources : editedResources } case .video: let editedResources = PHAssetResource.assetResources(for: asset).filter { $0.type == .fullSizeVideo } let originalResources = PHAssetResource.assetResources(for: asset).filter { $0.type == .video } resources = editedResources.isEmpty ? originalResources : editedResources default: print("Unsupported media type") completion(nil) return } guard let resource = resources.first else { print("No resource found") completion(nil) return } let fileName = resource.originalFilename let tempDirectoryURL = FileManager.default.temporaryDirectory let localURL = tempDirectoryURL.appendingPathComponent(fileName) // Delete existing files and reset cache if FileManager.default.fileExists(atPath: localURL.path) { do { try FileManager.default.removeItem(at: localURL) } catch { print("Error removing existing file: \(error)") } } let options = PHAssetResourceRequestOptions() options.isNetworkAccessAllowed = true resourceManager.writeData(for: resource, toFile: localURL, options: options) { (error) in if let error = error { print("Error writing asset data: \(error)") completion(nil) } else { completion(localURL) } } } private static func presentShareSheet(_ items: [Any], from viewController: UIViewController, sourceView: UIView) { print("presentShareSheet") let activityViewController = UIActivityViewController(activityItems: items, applicationActivities: nil) if UIDevice.current.userInterfaceIdiom == .pad { activityViewController.popoverPresentationController?.sourceView = sourceView activityViewController.popoverPresentationController?.sourceRect = sourceView.bounds } viewController.present(activityViewController, animated: true, completion: nil) } }```

I have a user who keeps crashing on his iOS 18 device, I need some help~ Exception 1, Code 26, Subcode 8 > Attempted to dereference garbage pointer 0x1a. 0 ImageIO IIOScanner::getVal32() + 36 1 ImageIO PSDReadPlugin::initialize(IIODictionary*) + 620 2 ImageIO PSDReadPlugin::initialize(IIODictionary*) + 620 3 ImageIO IIOReadPlugin::callInitialize() + 400 4 ImageIO IIO_Reader::initImageAtOffset(CGImagePlugin*, unsigned long, unsigned long, unsigned long) + 164 5 ImageIO IIOImageSource::makeImagePlus(unsigned long, IIODictionary*) + 832 6 ImageIO IIOImageSource::getPropertiesAtIndexInternal(unsigned long, IIODictionary*) + 72 7 ImageIO IIOImageSource::createThumbnailAtIndex(unsigned long, IIODictionary*, int*) + 1352 8 ImageIO CGImageSourceCreateThumbnailAtIndex + 740 9 Photos _createDecodedImageUsingImageIOWithFileUrlOrData + 856 10 Photos __91-[PHImageIODecoder decodeImageFromData:orFileURL:options:existingRequestHandle:completion:]_block_invoke_2 + 176 11 libdispatch.dylib _dispatch_call_block_and_release + 32 12 libdispatch.dylib _dispatch_client_callout + 20 13 libdispatch.dylib _dispatch_continuation_pop + 596 14 libdispatch.dylib _dispatch_async_redirect_invoke + 580 15 libdispatch.dylib _dispatch_root_queue_drain + 392 16 libdispatch.dylib _dispatch_worker_thread2 + 156 17 libsystem_pthread.dylib _pthread_wqthread + 228

After upgrading to Xcode16RC, in an old project based on ObjC, I directly used the following controller code in AppDelegate: - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view. UIButton *b = [[UIButton alloc]initWithFrame:CGRectMake(100, 100, 44, 44)]; [b setTitle:@"title" forState:UIControlStateNormal]; [self.view addSubview:b]; [b addTarget:self action:@selector(onB:) forControlEvents:UIControlEventTouchUpInside]; } - (IBAction)onB:(id)sender{ PHPickerConfiguration *config = [[PHPickerConfiguration alloc]initWithPhotoLibrary:PHPhotoLibrary.sharedPhotoLibrary]; config.preferredAssetRepresentationMode = PHPickerConfigurationAssetRepresentationModeCurrent; config.selectionLimit = 1; config.filter = nil; PHPickerViewController *picker = [[PHPickerViewController alloc]initWithConfiguration:config]; picker.modalPresentationStyle = UIModalPresentationFullScreen; picker.delegate = self; [self presentViewController:picker animated:true completion:nil]; } - (void)picker:(PHPickerViewController *)picker didFinishPicking:(NSArray<PHPickerResult *> *)results{ } Environment: Simulator iPhone 15 Pro (iOS18) Before this version (iOS17.4), clicking the button to pop up the system photo picker interface was normal (the top boundary was within the SafeAreaGuide area), but now the top boundary of the interface aligns directly to the top of the window, and clicking the photo cell is unresponsive. If I create a new Target, using the same codes, the photo picker page does not have the above problem. Therefore, I suspect it may be due to the old project’s .proj file’s info.plist, buildSetting, or buildPhase lacking some default configuration key value required by the new version, (My project was built years ago may be from iOS13 or earlier ) but I cannot confirm the final cause. iOS18.0 has the additional messages: objc[79039]: Class UIAccessibilityLoaderWebShared is implemented in both /Library/Developer/CoreSimulator/Volumes/iOS_22A3351/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 18.0.simruntime/Contents/Resources/RuntimeRoot/System/Library/AccessibilityBundles/WebCore.axbundle/WebCore (0x198028328) and /Library/Developer/CoreSimulator/Volumes/iOS_22A3351/Library/Developer/CoreSimulator/Profiles/Runtimes/iOS 18.0.simruntime/Contents/Resources/RuntimeRoot/System/Library/AccessibilityBundles/WebKit.axbundle/WebKit (0x1980fc398). One of the two will be used. Which one is undefined. AX Safe category class 'SLHighlightDisambiguationPillViewAccessibility' was not found! Has anyone encountered the same issue as me?

Hello, I am using the below code to request for video to be downloaded from iCloud. But the downloaded video size does not match with the original size of video. PHVideoRequestOptions *options = [[PHVideoRequestOptions alloc] init]; options.version = PHVideoRequestOptionsVersionOriginal; options.deliveryMode = PHVideoRequestOptionsDeliveryModeHighQualityFormat; [options setNetworkAccessAllowed:YES]; [[PHImageManager defaultManager] requestAVAssetForVideo:asset options:options resultHandler: ^(AVAsset *avAsset, AVAudioMix *audioMix, NSDictionary *info) { } Original size of video, getting it from below code NSArray *resources = [PHAssetResource assetResourcesForAsset:asset]; for (PHAssetResource *resource in resources) { if ((resource.type == PHAssetResourceTypeVideo) || (resource.type== PHAssetResourceTypePhoto)){ return resource; } } [resource valueForKey:@"fileSize"] The original Size and the downloaded size of video is not matching. Can anyone help me to debug what is the issue here

We are seeing how most of the images loaded from the PHPickerViewController with: result.itemProvider.loadFileRepresentation(forTypeIdentifier: imageType.identifier) take a fraction of a second to load. However, since a few weeks ago, we are seeing more a more images that take minutes, 10 minutes in some cases. This images shouldn't be in iCloud, they are recently taken, the devices have enough free space and we are trying with good network conditions. Are others out there experiencing the same? Any tips to prevent these long times?

When using PhotosPicker in SwiftUI to let users pick a photo, it will fail to load after switching to the "Collections" tab on iOS 18. This issue doesn't occur on iOS 17. Additionally, using PHPickerViewController will still have the same issue. The code is pretty simple: struct ContentView: View { @State private var selection: PhotosPickerItem? = nil var body: some View { VStack { PhotosPicker("Pick photo", selection: $selection) } .padding() } } And I create a repo for this code: https://github.com/JuniperPhoton/PhotosPickerIssueiOS18 This issue has been reported via Feedback app, and the report ID is FB15069998. I tested in the Xcode 16 Beta 6 and iOS 18 Beta 8. However with the Xcode 16 RC and the iOS 18 RC, this issue still exists. Hoping to find out any workaround to resolve this issue. Thanks.

I have an Electron app built for macOS, and it was distributed via 'Developer ID' for years, it worked well and I was able to access the photos in the system Photos library. Surely I already have the 'NSPhotoLibraryUsageDescription' key in Info.plist. Recently we are trying to publish this app to Mac App Store, so I have to turn on the sandbox, after that the app starts giving XPC errors while accessing the Photos library. The errors look like: PHAuthorizationStatus: Authorized CoreData: XPC: sendMessage: failed #0 CoreData: XPC: Unable to sendMessage: to server ... CoreData: XPC: sendMessage: failed #7 CoreData: XPC: Unable to connect to server with options { NSPersistentHistoryTrackingKey = 1; NSXPCStoreServerEndpointFactory = "<PLXPCPhotoLibraryStoreEndpointFactory: 0x7fc67e8af370>"; skipModelCheck = 1; } CoreData: XPC: Unable to load metadata: Error Domain=NSCocoaErrorDomain Code=134060 "A Core Data error occurred." UserInfo={Problem=Unable to send to server; failed after 8 attempts.} CoreData: fault: Unable to create token NSXPCConnection. NSXPCStoreServerEndpointFactory 0x7fc67e8af370 -newEndpoint returned nil CoreData: error: Failed to create NSXPCConnection It seems the app could detect the current PHAuthorizationStatus which is Authorized, but it can't fetch the photos from the Photos library (using PhotoKit). I learned from here that I could look for errors from the sandboxd daemon, so I did that, here is what I saw: Sandbox: Picture Keeper(32625) deny(1) mach-lookup com.apple.photos.service Violation: deny(1) mach-lookup com.apple.photos.service Process: Picture Keeper [32625] Path: /Applications/Picture Keeper.app/Contents/MacOS/Picture Keeper Load Address: 0x103bd3000 Identifier: com.simplifieditproducts.picturekeepermas Version: 4575 (4.5.75) Code Type: x86_64 (Native) Parent Process: Picture Keeper [1] Responsible: /Applications/Picture Keeper.app/Contents/MacOS/Picture Keeper User ID: 501 Date/Time: 2024-08-26 16:16:14.645 EDT OS Version: macOS 14.5 (23F79) Release Type: User Report Version: 8 MetaData: {"process_path":["Users","Kevin","Projects","Electron","picturekeeper-electron","dist","picturekeeper","mas-dev","Picture Keeper.app","Contents","MacOS","Picture Keeper"],"apple-internal":false,"primary-filter":"global-name","policy-description":"Sandbox","flags":5,"platform-policy":false,"build":"macOS 14.5 (23F79)","process-path":"\/Applications\/Picture Keeper.app\/Contents\/MacOS\/Picture Keeper","responsible-process-path":"\/Applications\/Picture Keeper.app\/Contents\/MacOS\/Picture Keeper","primary-filter-value":"com.apple.photos.service","platform_binary":"no","responsible-process-signing-id":"com.simplifieditproducts.picturekeepermas","hardware":"Mac","target":"com.apple.photos.service","action":"deny","mach_namespace":1,"checker-pid":1,"container":"\/Users\/Kevin\/Library\/Containers\/com.simplifieditproducts.picturekeepermas\/Data","binary-in-trust-cache":false,"team-id":"LU744924UY","process":"Picture Keeper","global-name":"com.apple.photos.service","platform-binary":false,"pid":32625,"summary":"deny(1) mach-lookup com.apple.photos.service","checker":"launchd","responsible-process-team-id":"xxxxx","operation":"mach-lookup","normalized_target":["com.apple.photos.service"],"errno":1,"uid":501,"profile-flags":0,"profile-in-collection":false,"sandbox_checker":"launchd","signing-id":"com.simplifieditproducts.picturekeepermas","release-type":"User"} I believe I already have the necessary entitlements for the Photos library, see: codesign -d --entitlements - /Applications/Picture\ Keeper.app/Contents/MacOS/Picture\ Keeper [Dict] [Key] com.apple.application-identifier [Value] [String] xxxx.com.simplifieditproducts.picturekeepermas [Key] com.apple.developer.team-identifier [Value] [String] xxxx [Key] com.apple.security.app-sandbox [Value] [Bool] true [Key] com.apple.security.application-groups [Value] [Array] [String] xxxx.com.simplifieditproducts.picturekeepermas [Key] com.apple.security.assets.movies.read-only [Value] [Bool] true [Key] com.apple.security.assets.music.read-only [Value] [Bool] true [Key] com.apple.security.assets.pictures.read-write [Value] [Bool] true [Key] com.apple.security.cs.allow-dyld-environment-variables [Value] [Bool] true [Key] com.apple.security.cs.allow-jit [Value] [Bool] true [Key] com.apple.security.cs.allow-unsigned-executable-memory [Value] [Bool] true [Key] com.apple.security.cs.disable-executable-page-protection [Value] [Bool] true [Key] com.apple.security.cs.disable-library-validation [Value] [Bool] true [Key] com.apple.security.device.usb [Value] [Bool] true [Key] com.apple.security.files.bookmarks.app-scope [Value] [Bool] true [Key] com.apple.security.files.bookmarks.document-scope [Value] [Bool] true [Key] com.apple.security.files.downloads.read-only [Value] [Bool] true [Key] com.apple.security.files.user-selected.read-write [Value] [Bool] true [Key] com.apple.security.network.client [Value] [Bool] true [Key] com.apple.security.network.server [Value] [Bool] true [Key] com.apple.security.personal-information.location [Value] [Bool] true [Key] com.apple.security.personal-information.photos-library [Value] [Bool] true By the way, the Photos library related code was built into a .node file (which is a dylib), and it will be loaded by the main executable during runtime. Anything I missed? Thank you!

I am trying to retrieve all PHAssets from the Photos Library that have been edited. PHAsset contains the "hasAdjustments" boolean variable but I cannot use that in an NSPredicate to filter for edited photos. What is the proper mechanism to filter out non-edited photos? Here is the code I have written that crashes: let formatString = "mediaType = %d && hasAdjustments == YES" let allPhotosOptions = PHFetchOptions() allPhotosOptions.sortDescriptors = [NSSortDescriptor(key: "creationDate", ascending: true)] allPhotosOptions.predicate = NSPredicate(format: formatString, PHAssetMediaType.image.rawValue) allPhotosOptions.includeAssetSourceTypes = [.typeUserLibrary, .typeiTunesSynced, .typeCloudShared] return PHAsset.fetchAssets(with: allPhotosOptions) Thanks, Rick

I am using PHPickerViewController to get assets from the photo library. It works fine, but it presents the images so that the newest is first. I would like to choose the order. In some cases I prefer the oldest image to be first. I have checked in PHPickerConfiguration with no success. I am just wondering if it is possible.

MacBook Air black screen

Dear Experts, When I use PHImageManager's requestImageDataAndOrientationForAsset method I always seem to get JPEG data, even when the original items in the photo library are PNGs (such as screenshots) or HEICs. Have I missed a setting somewhere that determines whether or not a "most compatible" format is used in this API? Thanks.

I have the Facebook SDK version 17.0.2 and xcode 15. Sharing photos and links work fine but when I try sharing videos, I get the following error: Failed to log access with error: access=<PATCCAccess 0x301d12b20> accessor:<<PAApplication 0x301d27e30 identifierType:auditToken identifier:{pid:18440, version:47210}>> identifier:A9159DCD-76B1-4C77-A01E-DA611929B50B kind:intervalEvent timestampAdjustment:0 visibilityState:0 assetIdentifierCount:0 accessCount:0 tccService:kTCCServicePhotos, error=Error Domain=NSCocoaErrorDomain Code=4097 "connection to service with pid 15679 named com.apple.privacyaccountingd" UserInfo={NSDebugDescription=connection to service with pid 15679 named com.apple.privacyaccountingd}