Hello all, I have a food delivery app that I am beginning to implement CarPlay support in. Route picking, navigation, turn-by-turn guidance features all work perfectly on iPhone, and on CarPlay while the iPhone is unlocked, or locked but screen on. However, when the iPhone is locked and the screen is off, the CarPlay map view stops following the user's location and appears to be frozen. When this happens, the other "map buttons" that are part of the CPMapTemplate continue to accept user input (I can enter and exit the map panning mode for example), the user's location continues to update, and the turn-by-turn guidance continues as normal. It appears to be just the map view (which is drawn on the window and is not part of the CPMapTemplate) that stops updating in this state. I've been through every page of Apple documentation on CarPlay but nothing references or addresses how to keep the CarPlay session active while the iPhone is locked. I'm not sure where else to look for answers and I'm out of theories as to why this might happen. Any guidance around this would be greatly appreciated.

Greetings, I recently submitted a request for the Location Push Service Extension Entitlement. Does anybody have insight into how long I would have to wait until Apple responds? Thanks

We’re building a new subway/bus app at the MTA. Our system includes roughly 300 underground stations, around 150 elevated stations (i.e., above street level), and about 5 at-grade stations (i.e., at street level). We serve roughly 5 million riders a day. We’re diving deep into Core Location on iOS and have found that the altitude values returned from two fields we’re testing aren’t accurate enough for our use case: CLLocation.altitude CMAbsoluteAltitudeData.altitude We need to reliably distinguish whether a user is: At street level On an elevated platform (see attached picture) On any platform in an underground station — most have a single platform level, but some, like 59 St (see attached), have multiple platforms at different elevations. These levels typically differ by at least 15 feet, which should in theory be well within the precision range of a properly calibrated barometric pressure sensor. However, the absolute altitude values we’re seeing from these APIs are often inaccurate and inconsistent — not only compared to ground truth, but also across devices. For example, holding two phones side-by-side frequently yields altitude readings that differ by more than 15 feet. That level of variation makes the data unreliable for our needs. Please see the below photos for more context. URLs.md

Dear Apple Developer Support, I am reaching out for guidance on implementing continuous directional and location updates in a watchOS app designed as part of a mapping/navigation solution. Current Scenario: We send continuous location and direction updates from our iOS app to the watchOS companion app. When viewing directions on the Apple Watch, the screen dims after a short period, and the live data stops updating consistently, even though the user is actively looking at the screen. This negatively impacts the usability of real-time navigation on watchOS. Our Objective: Prevent screen dimming (or extend screen-on time) while the user is viewing navigation directions. Ensure reliable, continuous data updates on the watch screen during active navigation sessions. Request: We would appreciate your guidance on: The recommended method to keep the watchOS screen active while displaying real-time navigation data. Proper use of APIs such as WKExtendedRuntimeSession, WorkoutSession, or any other mechanism suitable for this use case. Any best practices or App Store review considerations for apps that require extended screen time and continuous updates. How such use cases were traditionally handled on watchOS and what has or hasn’t worked. We want to ensure we're implementing this in a battery-efficient, user-respectful, and Apple-compliant manner. Thank you for your assistance and guidance.

Hey All, Seem to be in a loop and unable to proceed. New app specific for iOS being built on xCode. Project is configured only to deploy and use iOS, not macOS or anything else. Trying to create a new App iD always see it default to all platforms which means "Background Modes" is not visible or available. Automatic signing etc in xcode can't seem to get around this and just continues to flag I'm missing the entitlement for locations.background. Not sure what I am missing as I cannot manually configure the ID for iOS only and xcode is also generating new ID's with the same platform structure and constraints. Any thoughts or insights here please?

I have an error issue that I haven’t been able to solve despite doing extensive research. In fact the similar examples I have found so far have been educational but I have not been able to make work. The example below I am hoping will be easy to fix as it is only producing errors with one line of code… import SwiftUI import CoreLocation var currentLon = Double() var currentLat = Double() extension CLLocation { class func distance(from: CLLocationCoordinate2D, to: CLLocationCoordinate2D) -> CLLocationDistance { let from = CLLocation(latitude: from.latitude, longitude: from.longitude) let to = CLLocation(latitude: to.latitude, longitude: to.longitude) return from.distance(from: to) } func locationManager(_ manager: CLLocationManager, didUpdateLocations locations: [CLLocation]) { currentLon = (locations.last?.coordinate.longitude)! currentLat = (locations.last?.coordinate.latitude)! }/*⚠️ Not sure if this function will work? (Update User Location coordinates on the move?)*/ } struct Positions: Identifiable { let id = UUID() let name: String let latitude: Double let longitude: Double var coordinate: CLLocationCoordinate2D { CLLocationCoordinate2D(latitude: latitude, longitude: longitude) } } struct GameMapView: View { let from = CLLocationCoordinate2D(latitude: currentLon, longitude: currentLat) let to = CLLocationCoordinate2D(latitude: thisCardPositionLongitude, longitude: thisCardPositionLongitude) let distanceFrom = from.distance(from: to) /*⚠️ ERRORS: 1. Cannot use instance member 'from' within property initializer; property initializers run before 'self' is available. 2. Cannot use instance member 'to' within property initializer; property initializers run before 'self' is available. 3. Value of type 'CLLocationCoordinate2D' has no member 'distance'. */ @State private var region = MKCoordinateRegion( center: CLLocationCoordinate2D( latitude: thisCardPositionLatitude, longitude: thisCardPositionLongitude), span: MKCoordinateSpan( latitudeDelta: 0.0001, longitudeDelta: 0.0001) ) var body: some View { Map(coordinateRegion: $region, showsUserLocation: true, annotationItems: locations){ place in MapMarker(coordinate: place.coordinate,tint: Color.accentColor) } .edgesIgnoringSafeArea(.all) VStack { Print("Distance from Location: \(distanceFrom)") font(.largeTitle) padding() }

Waze is not available in the home screen icons for selection in CarPlay. I just reloaded Waze when it disappeared as a selectable icon. How can it be restored?

Hello, Is it possible to retrieve URLs (the URL associated for the specified location) for the Place object when you query the Apple Maps Server APIs? They are available when you make a MKLocalSearch.Request() directly in Swift. We have both iOS and Android apps, and it's not currently possible to get the URLs on Android. Thanks!

I'm working on an app that uses MapKit and CoreLocation. Is there a way to specify what location is simulated for a Preview, or create a preview that behaves as if the user denied location permissions, so that I can easily test my app's behavior in different scenarios? I know that you can simulate different locations in the Simulator, but haven't been able to get the previews within Xcode to have a location other than the center of Apple Park.

Hi everyone! I’m a new developer diving into my first Apple Watch project, and I’m really excited to get started! This app relies heavily on using the most precise location data possible. Could anyone point me to some official documentation or helpful resources on how to achieve high-accuracy location tracking specifically for watchOS? Any tips or best practices would also be greatly appreciated! Thanks in advance for your help!

Description of the Bug: Core Location intermittently reports inaccurate location updates, albeit with a high accuracy value. This problem occurs almost exclusively while travelling in metros underground affecting the ability to rely on the framework effectively. Steps to Reproduce: The user starts travelling on ground level at point A The user continues travelling and, after some time, is now underground at point B. A stationary beacon scanned at point B confirms this. Core Location is observed to deliver a location update with a high-accuracy value but with the coordinates around point A when the user is actually around point B. Expected Behaviour: Accurate locations should be delivered at all times. In other words, Core Location should not report location updates with high accuracy when its certainty is low.

Hello everyone, I'm doing some work on validating some data to do with the zpseed functionality around corelocations, i've read up on the speedaccuracy field but the wording doesn't make sense to me. It says if its a positive number it is plus or minus the value in the zspeed column so would this be for example zspeed of 35 mps with an accuracy of 3 mps would it be 32 mps 38 mps or is it a range? so would it be anywhere between 32-38 mps. Or is it just plus or minus the 3mps and if this is the case how would it be worked out if its plus or minus when all the numbers will be a positive numbers as any negative numbers are deemed inaccurate ?

We have an application. We are monitoring the fence event. We are using 'startMonitoringForRegion' API. but we are not getting any fence event. Steps Create a fence using 'startMonitoringForRegion' API BG on APNS trigger. initial fence state 'didDetermineState' not received. From Syslogs we can see OS has detected but event is not given to Application We are compiling code using SDK18.0 Error ** locationd Fence: LAC monitoring is not sufficient for / ocationd Fence: no allowing wifi monitor for, 400.0, fence Feedback Ticket ID: FB17250308 Syslogs Snippet: debug 2025-04-15 12:45:40.890193 -0500 locationd FenceCal: combine non-fine non-large fence, distance, 0.0, / //OS detetected fence state default 2025-04-15 12:45:44.706232 -0500 locationd Fence: fenceUpdate, , bundle, , type, GPS , loc, 33.1171776, -96.6606076, acc, 19, distance, 17, tech, LC...+, trans, 0, state, 0, cont, 1, fence, 33.11728835, -96.66048288, 1011.0, 766431742.6, sCount, 0, 0, trig, 0, 3, sinceLastLoc, 10.0, events, 0x00001810, status, (Inside) => (Inside) , settled state, (Unknown) ==> (Unknown), cantShiftButNeedTo, 0, sinceLastTransition, -1.0, significant, 0, loi, 0, lastProximityStateTimestamp, -1.000000, lastProximityState, 0, lastApproachingState, 0 // debug 2025-04-15 12:45:44.706247 -0500 locationd Fence: LAC monitoring is not sufficient for / // debug 2025-04-15 12:45:44.706263 -0500 locationd Fence: no allowing wifi monitor for, 400.0, fence, Fence, []//, latitude, 33.11728835, longitude, -96.66048288, refFrame, 0, distance, 1011.0, eFistance, 1011.0, lDown, -1.0, time, 766431742.6, ctime, -1.0, flags, EX------, key, -1506186373, throttled, N, polygon, 0, envType, 2, locType, 0

I have a marine navigation app which displays GPS quality information when receiving NMEA message from an external GPS. These include the number of satellites and Horizontal Dilution of Precision (HDOP). As far as I can see, the only additional information available through location services (for devices with built in GPS) is horizontal and vertical accuracy. Am I missing anything? Also does anyone know how horizontal accuracy is derived from HDOP?

When I try to import mapkitjs using HTML, I use the correct token, but the error token is invalid. <!DOCTYPE html> <html lang="zh-CN"> <head> <meta charset="UTF-8"> <meta name="viewport" content="width=device-width, initial-scale=1.0"> <title>地点信息查询</title> <style> body { font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, Oxygen, Ubuntu, Cantarell, 'Open Sans', 'Helvetica Neue', sans-serif; margin: 0; padding: 20px; background-color: #f5f5f7; } .container { max-width: 800px; margin: 0 auto; } .search-box { width: 100%; padding: 10px; margin-bottom: 20px; border: 1px solid #ccc; border-radius: 8px; font-size: 16px; } .result-container { background: white; padding: 20px; border-radius: 12px; box-shadow: 0 2px 4px rgba(0,0,0,0.1); } .place-image { width: 100%; max-height: 300px; object-fit: cover; border-radius: 8px; margin-bottom: 15px; } .place-info { margin-top: 15px; } .place-info h2 { margin-top: 0; color: #1d1d1f; } .info-item { margin: 10px 0; color: #515154; } #map { width: 100%; height: 300px; border-radius: 8px; margin-top: 20px; } </style> </head> <body> <div class="container"> <h1>地点信息查询</h1> <input type="text" id="searchInput" class="search-box" placeholder="请输入地点名称（如：北京故宫）"> <div class="result-container"> <div id="placeImage"></div> <div class="place-info"> <h2 id="placeName"></h2> <div id="placeDetails"></div> </div> <div id="map"></div> </div> </div> <script src="https://cdn.apple-mapkit.com/mk/5.x.x/mapkit.js"></script> <script> // 初始化 MapKit mapkit.init({ authorizationCallback: function(done) { done('mytoken'); }, language: 'zh-CN', region: 'CN', callback: function(error) { if (error) { console.error('MapKit 初始化错误:', error); alert('地图服务初始化失败，请检查网络连接和授权设置'); } else { console.log('MapKit 初始化成功'); } } }); // 添加错误处理 window.addEventListener('error', function(event) { console.error('MapKit 错误:', event.error); }); const searchInput = document.getElementById('searchInput'); const placeImage = document.getElementById('placeImage'); const placeName = document.getElementById('placeName'); const placeDetails = document.getElementById('placeDetails'); const mapDiv = document.getElementById('map'); let map; searchInput.addEventListener('input', debounce(searchPlace, 500)); function debounce(func, wait) { let timeout; return function executedFunction(...args) { const later = () => { clearTimeout(timeout); func(...args); }; clearTimeout(timeout); timeout = setTimeout(later, wait); }; } async function searchPlace() { console.log('搜索'); const query = searchInput.value; if (!query) return; try { // 使用 MapKit 搜索地点 const search = new mapkit.Search({ region: new mapkit.CoordinateRegion( new mapkit.Coordinate(39.9042, 116.4074), // 默认北京坐标 new mapkit.CoordinateSpan(0.1, 0.1) ) }); search.search(query, (error, data) => { if (error) { console.error('搜索错误:', error); return; } if (data.places.length > 0) { const place = data.places[0]; displayPlaceInfo(place); showMap(place); } }); } catch (error) { console.error('获取地点信息失败:', error); } } function displayPlaceInfo(place) { placeName.textContent = place.name; let detailsHTML = ''; if (place.address) { detailsHTML += `<p class="info-item">地址: ${place.address}</p>`; } if (place.phoneNumber) { detailsHTML += `<p class="info-item">电话: ${place.phoneNumber}</p>`; } if (place.url) { detailsHTML += `<p class="info-item">网址: <a href="${place.url}" target="_blank">${place.url}</a></p>`; } placeDetails.innerHTML = detailsHTML; // 获取地点图片 if (place.pointOfInterestCategory) { // 这里可以调用其他图片API来获取地点图片 // 示例使用占位图片 placeImage.innerHTML = `<img src="https://source.unsplash.com/800x400/?${encodeURIComponent(place.name)}" class="place-image" alt="${place.name}">`; } } function showMap(place) { if (map) { map.remove(); } map = new mapkit.Map(mapDiv, { region: new mapkit.CoordinateRegion( place.coordinate, new mapkit.CoordinateSpan(0.01, 0.01) ) }); const annotation = new mapkit.MarkerAnnotation(place.coordinate, { title: place.name, data: { place: place } }); map.addAnnotation(annotation); } </script> </body> </html>

Hello (: I have a question regarding the current pricing model for Apple Maps APIs, specifically MapKitJS, the Maps Snapshot API, and the Maps Server API. Previously, the documentation and my understanding indicated that the usage limits were defined per day — for example, 250,000 map loads per day for MapKitJS and 25,000 snapshots per day. However, in the Apple Developer Dashboard, I’m now seeing these limits shown on a per-month basis, such as only 25,000 snapshots per-month. This appears to contradict the publicly available information on the official website, which still states daily limits. Has the pricing model officially changed, or is this just a display issue in the dashboard? I need to know this because we're going into release soon, and then we might have thousands of users.

Hello (: I’m working with MapKitJS and would like to render polylines that follow roads — similar to the behavior seen on maps.apple.com. While I can align polylines to roads manually, I haven’t found a way to render them below street names and road shields. Currently, all polylines appear above labels, which reduces readability when displaying routes in urban areas. On maps.apple.com, polylines are rendered under street labels, which provides a much cleaner appearance. Is there a way to achieve this layering behavior in MapKitJS? If not, are there plans to support this kind of layer control in the future? Thanks in advance! MapKitJS (5.45.0): maps.apple.com:

Hello, I have noticed that some users have modified their real location through an app called "MGU" to bypass my app's security checks. I want to know how to protect my app and detect users using virtual location. I have reproduced the process of virtual positioning here: Insert a plug-in through the interface at the bottom of the phone and connect it via Bluetooth on the phone Set the desired positioning target on the "MGU" app Turn off your phone's WiFi, network, and location for 10 seconds, then turn it back on At this point, virtual positioning is successful. Please assist me in troubleshooting this issue and inform me of the principle of implementing virtual positioning in this app and how to prevent it. The following is the screen recording of virtual positioning operation: https://flowus.cn/share/145b3232-26c3-4ea3-b3ff-4aad1495eb4d

Hello, I'm encountering a runtime crash when building my visionOS app with Xcode 16.3 for visionOS 2.5. Our existing AppStore/Testflight app is also instantly crashing on visionOS 2.5 when opened but works fine on e.g visionOS 2.4. The app builds successfully but crashes on launch with this symbol lookup error (slightly adjusted because the forum complained regarding sensitive data): Symbol not found: _$sSo22CLLocationCoordinate2DVSE12CoreLocationMc Referenced from: <XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX> /private/var/containers/Bundle/Application/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/MyApp.app/MyApp.debug.dylib Expected in: <XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX> /usr/lib/swift/libswiftCoreLocation.dylib dyld config: DYLD_LIBRARY_PATH=/usr/lib/system/introspection DYLD_INSERT_LIBRARIES=/usr/lib/libLogRedirect.dylib:/usr/lib/libBacktraceRecording.dylib:/usr/lib/libMainThreadChecker.dylib:/System/Library/PrivateFrameworks/GPUToolsCapture.framework/GPUToolsCapture:/usr/lib/libViewDebuggerSupport.dylib I've already implemented my own Codable conformance for CLLocationCoordinate2D: extension CLLocationCoordinate2D: Codable { // implementation details... } This worked fine on previous visionOS/Xcode versions. Has anyone encountered this issue or found a solution? System details: macOS version: 15.3.2 Xcode version: 16.3 visionOS target: 2.5 Thank you!

We have a setup that's really close to the one used in the example project - Monitoring location changes with Core Location. In short, we have a flag that indicates whether or not we should start background location monitoring. If the flag is on, after the app starts, we Create a CLServiceSession with authorization: .always Create a CLBackgroundActivitySession The user can perform an action (press a button) to toggle the flag off, in which case we invalidate and dispose of the CLServiceSession and CLBackgroundActivitySession instances and cancel any liveUpdates observation. So far, so good, everything works as expected. However, we're experiencing a weird behavior on iPhones with Dynamic Island after there's an app update. When the user is on the same app version, the behavior is correct. have the flag on, background location monitoring works fine, when the app is in the the background, there's correctly a location indicator in Dynamic Island the user can go back to the app and turn the flag off (disposing of instances, cancelling location observation), and when the app is in the background, there is no location indicator in Dynamic Island The problem arises when the user updates the app open version 1.0 of the app have the flag on, background location monitoring works fine, when the app is in the the background, there's correctly a location indicator in Dynamic Island download an app update - version 2.0 the app restarts, didFinishLaunchingWithOptions gets called again and we start the background services dynamic island indicator is correctly showing a location indicator the user goes into the app, toggles the flag off - turning location observation off, we dispose of everything now, when the app is moved to the background, there's still a location indicator in the Dynamic Island, even though we're no longer observing location The indicator is hard to get rid of, there are only 2 ways we've found restart the device, or uninstall the app The question is - is this a bug in the system? Or is there anything we should be doing actively after an app update? Thank you!