While setting up the MDM server, I got the following error: Please tell me what the error is and how to fix it. ProfileConnection Error com.apple.ManagedConfiguration 12:33:23.432323+0900 ManagedConfiguration PerfPowerServices MDM profile installation check failed with error:NSError. Desc : Connectiong process 'com.apple.managedconfiguration.profiled-access' lacks permission US Desc: Calling process lacks 'com.apple.managedconfiguration.profiled-access' entitlement Domain : MCXPCErrorDomain Code : 39000 Type : MCFatalError Params : ( "com.apple.managedconfiguration.profiled-access" )

Dear Community, We are in the process of developing a mobile banking application and have a key requirement related to NFC-based peer-to-peer (P2P) transactions. Our goal is to enable secure and seamless money transfers between two devices using NFC. Business Requirement: The application will provide a feature where users can initiate money transfers via NFC. The sender starts an NFC payment session from their device. Simultaneously, the receiver starts an NFC session to accept the payment. The sender's device should be able to detect the receiver’s NFC tag and process the transaction securely. We would like to confirm whether iOS supports such a use case. Your guidance on the feasibility of this feature, along with any technical or policy-related considerations, would be highly valuable. Looking forward to your response.

We are in the process of developing a mobile banking application and have a key requirement related to NFC-based peer-to-peer (P2P) transactions. Our goal is to enable secure and seamless money transfers between two devices using NFC. Business Requirement: The application will provide a feature where users can initiate money transfers via NFC. The sender starts an NFC payment session from their device. Simultaneously, the receiver starts an NFC session to accept the payment. The sender's device should be able to detect the receiver’s NFC tag and process the transaction securely.

In our iOS app we have added example.com in associated domains from the very beginning With no AASA file hosted at example.com domain Now we need a subdomain app.example.com to be intercepted in our app, so for the same, we are thinking to host AASA at app.example.com and add app.example.com in associated domains too. so my question is will hosting AASA at sub domain works? If yes, will it affect older apps where app.example.com is not handled. In short we only want the links with app.example.com to be open in our app not the example.com links

Возможно ли сделать из iPhone мини квадрокоптер. Встроить маленькие пропеллеры , выдвижные естественно и с подвижной камерой, если это возможно ) или тогда просто неподвижной но зато летучим iPhone. На счет пульта не известно. Наверно такой телефон не будет стандартного размера, наверно как caterpillar, но я бы купил )

Hello, I am building a workout app that has an option to add segments to differentiate different stages of the training session. Segments are added the following way: func saveSegment(eventType: HKWorkoutEventType, startDate: Date, endDate: Date, inSeg: Int) async throws { let dateInterval = DateInterval(start: startDate, end: endDate) let event = HKWorkoutEvent(type: eventType, dateInterval: dateInterval, metadata: metadata) try await builder?.addWorkoutEvents([event]) } Inside Health -> Workouts -> Show All Data, the segments appear, but in Fitness app there are no segments. The workout is .paddleSports. I thought that maybe the workout type was the problem, but when I start the sessions from the native workout app, segments are added and shown in the Fitness app: In other posts I saw suggested to add an event as .marker instead of .segment, but the result is the same, it does not appear. Is there something I am doing wrong? How can I show the segments into the Fitness app? Another question, I would like to add stroke rate and stroke count to my paddling session, is there a way to add it? Paddle Sports workout was recently introduced and it would be great to have the option to add those values. Thank you in advance. Inaki

Why is the language character obtained by NSLocale.preferred Languages sometimes zh Han HK and sometimes zh HK? What kind of setting determines the value of this character

[https://vimeo.com/manage/videos/1051990313) We are experiencing an issue where a user is unable to open our app on their iPhone 16 Pro Max running iOS 18.3. When the user selects the app, it begins to scale to screen size but then fades away without fully opening. It is unclear whether this is a crash or another issue. To troubleshoot, we created a simplified version of the app containing only a single screen displaying "Hello, World." The user experiences the same issue with this version, leading us to believe there may be a device-specific setting or compatibility issue at play. Steps the User Has Tried: Checked device storage – over 200GB available Offloaded and reinstalled the app Deleted and reinstalled the app Updated to iOS 18.3 Forced restart of the device Reset network settings Turned off VPN Despite these steps, the issue persists. We would appreciate any guidance on potential causes or troubleshooting steps to resolve this issue.

On wake from sleep the Mac Studio's Desktop picture is shown in actual resolution instead of stretched to fit screen. For example, a picture which is 2059 × 1371 is shown at that resolution on a 5K Retina screen and so only fills about 60% of the screen area. It starts with the picture positioned in the top left corner but sometimes moves down the screen. This behaviour does not change if the screen is scaled up or down – the picture size is also scaled. Notice that icons on the Desktop are displayed in the correct position. At the same time, the Dock is shown at the bottom of the picture instead of at the bottom of the screen. Usually, the Desktop redisplays correctly. But increasingly, the only solution is to log out and in again. This might be related to my other question on the Desktop picture Pref Pane. See attached example which is a full screen capture i.e. command-shift-3 (with my personal details obscured):

Open an existing contact Click Edit —> Add Birthday Select Date and Save Close the contact app Come back to the same contact, the birthday is gone.

Each time I try to start Signal. It immediately crashes.

I want the wkwebview to revert to its previous state when I restart it.

Hello, One of our apps has been rejected under Guideline 4.3 for spam. Our studio has been on the App Store for 10+ years and this particular app has been available for over two years without previous issue. We have submitted a couple responses to the original rejection outlining why we think our app is unique and not spam and unfortunately we have been rejected. I have also submitted an appeal and requested a phone call. This is compounded by a live issue happening in our app right now that requires a build to unblock. I added that to our review notes for submission but was rejected. We believe we have been flagged as spam in error and would like to release builds to our active players ASAP to get them unblocked and provide further value to them. Beyond submitting an appeal and requesting a call is there anything else I can do?

help me how to fix this issue !!

I have a Logitech Yeti GX microphone, which is working, but i am unable to fully use all its features because of a driver issue. Logitech states the following to resolve "The program Logitech G Hub Driver installer tried to load a new driver extension. To enable this extension, open Systems Settings>General>Login Items & Extensions>Logitech G Hub HID Driver Extension> Toggle on.... that appears to be simple enough... only problem is that Driver Extension doesnt exist as an option for me. Any thoughts as to why not? Thanks for your help.

Please provide me with an access code to TestFlight

Apple has a massive opportunity to improve iOS for business users with ARM (Apple Relationship Manager)—a built-in tool that allows professionals to log, summarize, and integrate calls & messages into CRM workflows. Many professionals (salespeople, executives, entrepreneurs) use iPhones for business, but there’s no easy way to track conversations, categorize interactions, or integrate messages with a CRM. ARM would solve this by allowing: ✅ AI-powered call summaries (users get a suggested summary after each call, which can be reviewed and tagged). ✅ iMessage/SMS tagging (users can hold down messages to assign a sentiment or create a follow-up). ✅ CRM Integration (ARM logs could sync with HubSpot, Salesforce, etc.). How ARM Would Work: • Users could tap an “ARM Accept” (green accept button with the ARM logo instead of white phone symbol) button before a call to activate AI-powered summarization. • After the call, users would review/edit the summary and log a sentiment (e.g., “Needs Follow-Up”). • In iMessage, users could long-press messages to summarize conversations and tag key interactions for both blue and green messages. • ARM would keep everything on-device, ensuring privacy and security. Since Apple Intelligence is already introducing AI-powered features, ARM could make iPhones the ultimate business communication tool while keeping everything private and secure. If you also want Apple to build this, submit feedback at Apple Feedback and comment here to show support!

Background: We are using Apple WeatherKit for an app to fetch future weather data specialty cloudCover and condition and pretipitationChance from the Overnightforecast data from weatherResponse.dailyForecast.forecast array object. Code Sample: On xcode on Swift and Swift UI using Apple WeatherKit task{ do{ let weatherResponse= try await self.weatherService.forecast(for: latLong) let cloudCover = weatherResponse.dailyForecast.forecast[0].overnightforecast.cloudCover Issue: While we are on debug mode, we can literally see overnightforecast.cloudCover data (as well as condition and pretipitationChance) is available under from index 0 to index 10 of weatherResponse.dailyForecast.forecast array object but when we are trying to assign this property, its throwing error as "overnightforecast object not present under weatherResponse.dailyForecast.forecast array object" Attachment:

Hi - I've been using logic for a few years now. Three days ago I whilst opening it, a pop up said MIDICORE was not working and I haven't been able to fix it since. I read online that booting up in safe mode + opening audio MIDI set up would fix it, thing is audio MIDI set up wont load up. Anyone knows how I can fix it? I am on the verge of tears as I cannot seam to find any information online about audio MIDI set up not opening. And I cannot seam to fix the MIDI issue without it. Thanks!

As explained above only ended up being about to use voice and text