Is there a way to destroy MIDIUMPMutableEndpoint again? In my app, the user has a setting to enable and disable MIDI 2.0. If MIDI 2.0 should not be supported (or if iOS version < 18), it creates a virtual destination and a virtual source. And if MIDI 2.0 should be enabled, it instead creates a MIDIUMPMutableEndpoint, which itself creates the virtual destination and source automatically. So here is my problem: I didn't find any way to destroy the MIDIUMPMutableEndpoint again. There is a method to disable it (setEnabled:NO), but that doesn't destroy or hide the virtual destination and source. So when the user turns MIDI 2.0 support off, I will have two virtual destinations and sources, and cannot get rid of the 2.0 ones. What is the correct way to get rid of the MIDIUMPMutableEndpoint once it is created?

I am developing an app with transcription and I am exploring ways to improve the transcription from the SpeechAnalyzer/Transcriber for technical terms. SFSpeech... recognition had the capability of being augmented by contextualStrings. Does something similar exist for SpeechAnalyzer/Transcriber? If so please point me towards the documentation and any sample code that may exist for this. If there are other options, please let me know.

I have some tried-and-tested code that records and plays back audio via AUHAL which breaks on Tahoe on Intel. The same code works fine on Sequioa and also works on Tahoe on Apple Silicon. To start with something simple, the following code to request access to the Microphone doesn't work as it should: bool RequestMicrophoneAccess () { __block AVAuthorizationStatus status = [AVCaptureDevice authorizationStatusForMediaType: AVMediaTypeAudio]; if (status == AVAuthorizationStatusAuthorized) return true; __block bool done = false; [AVCaptureDevice requestAccessForMediaType: AVMediaTypeAudio completionHandler: ^ (BOOL granted) { status = (granted) ? AVAuthorizationStatusAuthorized : AVAuthorizationStatusDenied; done = true; }]; while (!done) CFRunLoopRunInMode (kCFRunLoopDefaultMode, 2.0, true); return status == AVAuthorizationStatusAuthorized; } On Tahoe on Intel, the code runs to completion but granted is always returned as NO. Tellingly, the popup to ask the user to grant microphone access is never displayed, even though the app is not present in the Privacy pane and never appears there. On Apple Silicon, everything works fine. There are some other problems, but I'm hoping they have a common underlying cause and that the Apple guys can figure out what's wrong from the information in this post. I'd be happy to test any potential fix. Thanks.

Is there a recommended way on macOS 26 Tahoe to take a CoreAudio AudioObjectID and use it to lookup the underlying USB LocationID? I previously used AudioObjectID to query the corresponding DeviceUID with kAudioDevicePropertyDeviceUID. Then I queried for the IOService matching kIOAudioEngineClassName with property kIOAudioEngineGlobalUniqueIDKey matching DeviceUID, and I loaded kUSBDevicePropertyLocationID from the result. This fails on macOS 26, because the IO Registry for the device has an entry for usbaudiod rather than AppleUSBAudioEngine, and usbaudiod does not include a kIOAudioEngineGlobalUniqueIDKey property (or any other property to map it to a CoreAudio DeviceUID). My use-case here is a piece of audio recording software that allows configuring a set of supported audio devices via USB HID prior to recording. I present the user with a list of CoreAudio devices to use, but without a way to lookup the underlying USB LocationID, I cannot guarantee that the configured device matches the selected device (e.g. if the user plugged in two identical microphones).

Hey there, I just upgraded to Mac OS Tahoe ,son an apple MacBook Pro 2019 16inch. am using IntellijIDEA and Flutter to develop a mobile app which I test on the simulator app running iOS 18.4 . the issue: when I start the simulator app. ( while in the loading phase and in the operation phase as well ), the audio from an already open YouTube tab on safari (this happens on chrome browser as well). the sound glitches and becomes Noise. a fix I found online is to kill the audio deamon on Mac OS, This works using the command: "sudo killall coreaudiod" this kills the audio process, (while the emulator is operational), then the macOS restarts the audio deamon then the audio works fine alongside with the simulator being open. I just want to ask is there a permanent fix for this? is Apple working on a fix for this in the upcoming update?

On macOS Sequoia, I'm having the hardest time getting this basic audio output to work correctly. I'm compiling in XCode using C99, and when I run this, I get audio for a split second, and then nothing, indefinitely. Any ideas what could be going wrong? Here's a minimum code example to demonstrate: #include &lt;AudioToolbox/AudioToolbox.h&gt; #include &lt;stdint.h&gt; #define RENDER_BUFFER_COUNT 2 #define RENDER_FRAMES_PER_BUFFER 128 // mono linear PCM audio data at 48kHz #define RENDER_SAMPLE_RATE 48000 #define RENDER_CHANNEL_COUNT 1 #define RENDER_BUFFER_BYTE_COUNT (RENDER_FRAMES_PER_BUFFER * RENDER_CHANNEL_COUNT * sizeof(f32)) void RenderAudioSaw(float* outBuffer, uint32_t frameCount, uint32_t channelCount) { static bool isInverted = false; float scalar = isInverted ? -1.f : 1.f; for (uint32_t frame = 0; frame &lt; frameCount; ++frame) { for (uint32_t channel = 0; channel &lt; channelCount; ++channel) { // series of ramps, alternating up and down. outBuffer[frame * channelCount + channel] = 0.1f * scalar * ((float)frame / frameCount); } } isInverted = !isInverted; } AudioStreamBasicDescription coreAudioDesc = { 0 }; AudioQueueRef coreAudioQueue = NULL; AudioQueueBufferRef coreAudioBuffers[RENDER_BUFFER_COUNT] = { NULL }; void coreAudioCallback(void* unused, AudioQueueRef queue, AudioQueueBufferRef buffer) { // 0's here indicate no fancy packet magic AudioQueueEnqueueBuffer(queue, buffer, 0, 0); } int main(void) { const UInt32 BytesPerSample = sizeof(float); coreAudioDesc.mSampleRate = RENDER_SAMPLE_RATE; coreAudioDesc.mFormatID = kAudioFormatLinearPCM; coreAudioDesc.mFormatFlags = kLinearPCMFormatFlagIsFloat | kLinearPCMFormatFlagIsPacked; coreAudioDesc.mBytesPerPacket = RENDER_CHANNEL_COUNT * BytesPerSample; coreAudioDesc.mFramesPerPacket = 1; coreAudioDesc.mBytesPerFrame = RENDER_CHANNEL_COUNT * BytesPerSample; coreAudioDesc.mChannelsPerFrame = RENDER_CHANNEL_COUNT; coreAudioDesc.mBitsPerChannel = BytesPerSample * 8; coreAudioQueue = NULL; OSStatus result; // most of the 0 and NULL params here are for compressed sound formats etc. result = AudioQueueNewOutput(&amp;coreAudioDesc, &amp;coreAudioCallback, NULL, 0, 0, 0, &amp;coreAudioQueue); if (result != noErr) { assert(false == "AudioQueueNewOutput failed!"); abort(); } for (int i = 0; i &lt; RENDER_BUFFER_COUNT; ++i) { uint32_t bufferSize = coreAudioDesc.mBytesPerFrame * RENDER_FRAMES_PER_BUFFER; result = AudioQueueAllocateBuffer(coreAudioQueue, bufferSize, &amp;(coreAudioBuffers[i])); if (result != noErr) { assert(false == "AudioQueueAllocateBuffer failed!"); abort(); } } for (int i = 0; i &lt; RENDER_BUFFER_COUNT; ++i) { RenderAudioSaw(coreAudioBuffers[i]-&gt;mAudioData, RENDER_FRAMES_PER_BUFFER, RENDER_CHANNEL_COUNT); coreAudioBuffers[i]-&gt;mAudioDataByteSize = coreAudioBuffers[i]-&gt;mAudioDataBytesCapacity; AudioQueueEnqueueBuffer(coreAudioQueue, coreAudioBuffers[i], 0, 0); } AudioQueueStart(coreAudioQueue, NULL); sleep(10); // some time to hear the audio AudioQueueStop(coreAudioQueue, true); AudioQueueDispose(coreAudioQueue, true); return 0; }

Hello, I'm trying to determine the best/recommended AVAudioSession configuration (i.e category, mode, and options) for the following use-case. Essentially, I'd like to switch between periods of playing an audio file and then recognizing speech. The audio file is typically speech and I don't intend for playback and speech recognition to occur simultaneously. I'd like for the user to sill be able to interact with Siri and I'd like for it to work with CarPlay where navigation prompts can occur. I would assume the category to use is 'playAndRecord', but I'm not sure if it's better to just set that once for the entire lifecycle, or set to 'playback' for audio file playback and then switch to 'playAndRecord' for speech recognition . I'm also not sure on the best 'mode' and 'options' to set. Any suggestions would be appreciated. Thanks.

I am trying to debug the AAX version of my plugin (MIDI effect) on Pro Tools, but I am getting the following error (Mac console) when attempting to load it: dlsym cannot find symbol g_dwILResult in CFBundle etc.. I used Xcode 16.4 to build the plugin. Has anybody come across the same or a similar message? Best, Achillefs Axart Labs

hi, Is there an Audio Unit logo I can show on my website? I would love to show that my application is able to host Audio Unit plugins. regards, Joël

I’m using the shared instance of AVAudioSession. After activating it with .setActive(true), I observe the outputVolume, and it correctly reports the device’s volume. However, after deactivating the session using .setActive(false), changing the volume, and then reactivating it again, the outputVolume returns the previous volume (before deactivation), not the current device volume. The correct volume is only reported after the user manually changes it again using physical buttons or Control Center, which triggers the observer. What I need is a way to retrieve the actual current device volume immediately after reactivating the audio session, even on the second and subsequent activations. Disabling and re-enabling the audio session is essential to how my application functions. I’ve tested this behavior with my colleagues, and the issue is consistently reproducible on iOS 18.0.1, iOS 18.1, iOS 18.3, iOS 18.5 and iOS 18.6.2. On devices running iOS 17.6.1 and iOS 16.0.3, outputVolume correctly reflects the current volume immediately after calling .setActive(true) multiple times.

Hi, I believe I've found a potential error in the sample code on the documentation page for creating and using a process tap with an aggregate device. The issue is in the section explaining how to add a tap to the aggregate device. I have already filed a Feedback Assistant ticket on this (ID: FB17411663) but haven't heard back for months. Capturing system audio with Core Audio taps The sample code for modifying the kAudioAggregateDevicePropertyTapList incorrectly uses the tapID as the target AudioObjectID when calling AudioObjectSetPropertyData. // (Code to get the list and potentially modify listAsArray) if var listAsArray = list as? [CFString] { // ... (modification logic) ... // Set the list back on the aggregate device. <--- The comment is correct list = listAsArray as CFArray _ = withUnsafeMutablePointer(to: &list) { list in // INCORRECT: This call uses tapID as the target object. AudioObjectSetPropertyData(tapID, &propertyAddress, 0, nil, propertySize, list) } } The kAudioAggregateDevicePropertyTapList is a property that belongs to the aggregate device, not the individual tap. Therefore, to set this property, the AudioObjectSetPropertyData function must target the AudioObjectID of the aggregate device itself. Using tapID as the first argument is logically incorrect for this operation and will not update the aggregate device as intended. Furthermore, the preceding AudioObjectGetPropertyData call to fetch the list also appears to use the incorrect tapID as its target in the sample. The AudioObjectID for both getting and setting this property should be the ID of the aggregate device. _ = AudioObjectGetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, &propertySize, &list) _ = AudioObjectSetPropertyData(aggregateDeviceID, &propertyAddress, 0, nil, propertySize, newList) Thank you!

Hi everyone, I’m testing audio recording on an iPhone 15 Plus using AVFoundation. Here’s a simplified version of my setup: let settings: [String: Any] = [ AVFormatIDKey: Int(kAudioFormatLinearPCM), AVSampleRateKey: 8000, AVNumberOfChannelsKey: 1, AVLinearPCMBitDepthKey: 16, AVLinearPCMIsFloatKey: false ] audioRecorder = try AVAudioRecorder(url: fileURL, settings: settings) audioRecorder?.record() When I check the recorded file’s sample rate, it logs: Actual sample rate: 8000.0 However, when I inspect the hardware sample rate: try session.setCategory(.playAndRecord, mode: .default) try session.setActive(true) print("Hardware sample rate:", session.sampleRate) I consistently get: `Hardware sample rate: 48000.0 My questions are: Is the iPhone mic actually capturing at 8 kHz, or is it recording at 48 kHz and then downsampling to 8 kHz internally? Is there any way to force the hardware to record natively at 8 kHz? If not, what’s the recommended approach for telephony-quality audio (true 8 kHz) on iOS devices? Thanks in advance for your guidance!

3 I am working on an application to get when input audio device is being used. Basically I want to know the application using the microphone (built-in or external) This app runs on macOS. For Mac versions starting from Sonoma I can use this code: int getAudioProcessPID(AudioObjectID process) { pid_t pid; if (@available(macOS 14.0, *)) { constexpr AudioObjectPropertyAddress prop { kAudioProcessPropertyPID, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMain }; UInt32 dataSize = sizeof(pid); OSStatus error = AudioObjectGetPropertyData(process, &amp;prop, 0, nullptr, &amp;dataSize, &amp;pid); if (error != noErr) { return -1; } } else { // Pre sonoma code goes here } return pid; } which works. However, kAudioProcessPropertyPID was added in macOS SDK 14.0. Does anyone know how to achieve the same functionality on previous versions?

I’m running HomePod OS 26 on two HomePod minis and OS 18.6 on main HomePod (original) I’ve enabled Crossfade in the Home app. I’m playing Apple Music directly in the HomePod mini. Crossfade just doesn’t work on any HomePod. I can understand it not working on the HomePod - but why isn’t it working on the minis running OS 26? I’ve tried disabling and enabling Crossfade, rebooting HomePods etc but nothing?!

Hello, I'm evaluating the Apple Music Feed dataset and I noticed that the total number of songs available in the feed is too small. As of today, the number of objects returned in each feed is: 51,198,712 albums 23,093,698 artists 173,235,315 songs This gives an average of 3.38 songs per album which is quite low. Also, iterating on the data I see that there are albums referencing songs that don't exist in the songs feed. I would like to know: Is the feed data incomplete? If so, in what situations an object may be missing from the feed? Thank you in advance!

Session player regions populate blank, with no sound media when tracks or regions are created.

Hi, I've had a new deck installed in my car for about 1.5 weeks. I'm having compatibility issues with my 15PM. It happens both wired and wirelessly, I get the error "Accessory not supported by this device". It used to happen all the time, now it's 50/50. Sometimes it works. I've removed and added Bluetooth multiple times on phone and deck, I bought a belkin usb-c to usb-a cable today and it seems to fix it but the problem comes back. I've changed the setting "FaceID and passcode-allow access when locked-accessories." The car stereo guy reckons it's definitely an issue with the phone not the deck, I'm inclined to believe him since the error states "by this device". Any advice appreciated.

Hi, I have just implemented an Audio Unit v3 host. AgsAudioUnitPlugin *audio_unit_plugin; AVAudioUnitComponentManager *audio_unit_component_manager; NSArray<AVAudioUnitComponent *> *av_component_arr; AudioComponentDescription description; guint i, i_stop; if(!AGS_AUDIO_UNIT_MANAGER(audio_unit_manager)){ return; } audio_unit_component_manager = [AVAudioUnitComponentManager sharedAudioUnitComponentManager]; /* effects */ description = (AudioComponentDescription) {0,}; description.componentType = kAudioUnitType_Effect; av_component_arr = [audio_unit_component_manager componentsMatchingDescription:description]; i_stop = [av_component_arr count]; for(i = 0; i < i_stop; i++){ ags_audio_unit_manager_load_component(audio_unit_manager, (gpointer) av_component_arr[i]); } /* instruments */ description = (AudioComponentDescription) {0,}; description.componentType = kAudioUnitType_MusicDevice; av_component_arr = [audio_unit_component_manager componentsMatchingDescription:description]; i_stop = [av_component_arr count]; for(i = 0; i < i_stop; i++){ ags_audio_unit_manager_load_component(audio_unit_manager, (gpointer) av_component_arr[i]); } But this doesn't show me Audio Unit v2 plugins, why? regards, Joël

I am trying to get MIDI output from the AU Host demo app using the recent MIDI processor example. The processor works correctly in Logic Pro, but I cannot send MIDI from the AUv3 extension in standalone mode using the default host app to another program (e.g., Ableton). The MIDI manager, which is part of the standalone host app, works fine, and I can send MIDI using it directly—Ableton receives it without issues. I have already set the midiOutputNames in the extension, and the midiOutBlock is mapped. However, the MIDI data from the AUv3 extension does not reach Ableton in standalone mode. I suspect the issue is that midiOutBlock might never be called in the plugin, or perhaps an input to the plugin is missing, which prevents it from sending MIDI. I am currently using the default routing. I have modified the MIDI manager such that it works well as described above. Here is a part of my code for SimplePlayEngine.swift and my MIDIManager.swift for reference: @MainActor @Observable public class SimplePlayEngine { private let midiOutBlock: AUMIDIOutputEventBlock = { sampleTime, cable, length, data in return noErr } var scheduleMIDIEventListBlock: AUMIDIEventListBlock? = nil public init() { engine.attach(player) engine.prepare() setupMIDI() } private func setupMIDI() { if !MIDIManager.shared.setupPort(midiProtocol: MIDIProtocolID._2_0, receiveBlock: { [weak self] eventList, _ in if let scheduleMIDIEventListBlock = self?.scheduleMIDIEventListBlock { _ = scheduleMIDIEventListBlock(AUEventSampleTimeImmediate, 0, eventList) } }) { fatalError("Failed to setup Core MIDI") } } func initComponent(type: String, subType: String, manufacturer: String) async -> ViewController? { reset() guard let component = AVAudioUnit.findComponent(type: type, subType: subType, manufacturer: manufacturer) else { fatalError("Failed to find component with type: \(type), subtype: \(subType), manufacturer: \(manufacturer))" ) } do { let audioUnit = try await AVAudioUnit.instantiate( with: component.audioComponentDescription, options: AudioComponentInstantiationOptions.loadOutOfProcess) self.avAudioUnit = audioUnit self.connect(avAudioUnit: audioUnit) return await audioUnit.loadAudioUnitViewController() } catch { return nil } } private func startPlayingInternal() { guard let avAudioUnit = self.avAudioUnit else { return } setSessionActive(true) if avAudioUnit.wantsAudioInput { scheduleEffectLoop() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) do { try engine.start() } catch { isPlaying = false fatalError("Could not start engine. error: \(error).") } if avAudioUnit.wantsAudioInput { player.play() } isPlaying = true } private func resetAudioLoop() { guard let avAudioUnit = self.avAudioUnit else { return } if avAudioUnit.wantsAudioInput { guard let format = file?.processingFormat else { fatalError("No AVAudioFile defined.") } engine.connect(player, to: engine.mainMixerNode, format: format) } } public func connect(avAudioUnit: AVAudioUnit?, completion: @escaping (() -> Void) = {}) { guard let avAudioUnit = self.avAudioUnit else { return } engine.disconnectNodeInput(engine.mainMixerNode) resetAudioLoop() engine.detach(avAudioUnit) func rewiringComplete() { scheduleMIDIEventListBlock = auAudioUnit.scheduleMIDIEventListBlock if isPlaying { player.play() } completion() } let hardwareFormat = engine.outputNode.outputFormat(forBus: 0) engine.connect(engine.mainMixerNode, to: engine.outputNode, format: hardwareFormat) if isPlaying { player.pause() } let auAudioUnit = avAudioUnit.auAudioUnit if !auAudioUnit.midiOutputNames.isEmpty { auAudioUnit.midiOutputEventBlock = midiOutBlock } engine.attach(avAudioUnit) if avAudioUnit.wantsAudioInput { engine.disconnectNodeInput(engine.mainMixerNode) if let format = file?.processingFormat { engine.connect(player, to: avAudioUnit, format: format) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: format) } } else { let stereoFormat = AVAudioFormat(standardFormatWithSampleRate: hardwareFormat.sampleRate, channels: 2) engine.connect(avAudioUnit, to: engine.mainMixerNode, format: stereoFormat) } rewiringComplete() } } and my MIDI Manager @MainActor class MIDIManager: Identifiable, ObservableObject { func setupPort(midiProtocol: MIDIProtocolID, receiveBlock: @escaping @Sendable MIDIReceiveBlock) -> Bool { guard setupClient() else { return false } if MIDIInputPortCreateWithProtocol(client, portName, midiProtocol, &port, receiveBlock) != noErr { return false } for source in self.sources { if MIDIPortConnectSource(port, source, nil) != noErr { print("Failed to connect to source \(source)") return false } } setupVirtualMIDIOutput() return true } private func setupVirtualMIDIOutput() { let virtualStatus = MIDISourceCreate(client, virtualSourceName, &virtualSource) if virtualStatus != noErr { print("❌ Failed to create virtual MIDI source: \(virtualStatus)") } else { print("✅ Created virtual MIDI source: \(virtualSourceName)") } } func sendMIDIData(_ data: [UInt8]) { print("hey") var packetList = MIDIPacketList() withUnsafeMutablePointer(to: &packetList) { ptr in let pkt = MIDIPacketListInit(ptr) _ = MIDIPacketListAdd(ptr, 1024, pkt, 0, data.count, data) if virtualSource != 0 { let status = MIDIReceived(virtualSource, ptr) if status != noErr { print("❌ Failed to send MIDI data: \(status)") } else { print("✅ Sent MIDI data: \(data)") } } } } }

Hi, when using ApplicationMusicPlayer from MusicKit my app automatically gets the media controls on the lock screen: Play/ Pause, Skip Buttons, Playback Position etc. I would like to customize these. Tried a bunch of things, e.g. using MPRemoteCommandCenter. So far I haven't had any success. Does anyone know how I can customize the media controls of ApplicationMusicPlayer. Thank you.