iPhoneで撮影した映像をブラウザのアプリへ送信して画面に映す機能を持ったアプリを開発しています。 iPhone 17 Pro, 17 Pro Maxでこのアプリを利用するとブラウザ側に表示される映像が緑一色や、緑がメインのカラフルな映像になってしまいます。 調べてみると17Proと17ProMaxで超広角カメラと望遠カメラの画素数が変更になっている（1200万画素→4800万画素）ためエンコーディングで失敗しているのではないかと疑っています。 なんでも情報下さい。 環境情報 WebRTCライブラリ： GoogleWebRTC バージョン 1.1 (CocoaPodsで導入) シグナリングサーバー： AWS Kinesis Video Streams 問題が発生するデバイス： モデル名: iPhone18,1, OS: 26.0 モデル名: iPhone18,1, OS: 26.1 問題が発生しないデバイス： iPhone17,5 以前の多数のモデル モデル名: iPhone18,1, OS: 26.0 モデル名: iPhone18,3, OS: 26.0

I'm using the SwiftUI Photos Picker to select videos from the users Photos library and then opening the video using the PhotosPickerItem. I'm looking for a way to allow the user to open the same video on their other devices as the app uses SwiftData and CloudKit to provide access to a recently watched list of videos. The URL from the PhotosPickerItem appears to be device specific and so I was looking to see if I can use the itemIdentifier and then the init that takes the itemIdentifier to create the PhotosPickerItem on the other devices. The itemIdentifier however is always nil and so wouldn't be able to be used in this way. Is there an alternative approach whereby the users can open a video using a PhotosPickerItem and that item would be viewable on their other devices with an item identifier or a URL that is device agnostic. This approach should also not involve copying the video into other storage as it would simply expand the use of the users iCloud storage, providing a less than ideal user experience. If the user has opened the video from their Photos library, there should be a way to allow the same user (e.g. same Apple ID), to use the same app on another device to open the video again.

When trying to record ProRes RAW (btp2) with AVAssetWriter I get several types of errors: -12780 or -11875. I wonder if recording ProRes RAW can only be done through AVCaptureMovieFileOutput, or if there a way to correctly configure AVAssetWriter to do it.

Adding both AVCaptureMovieFileOutput and AVCaptureVideoDataOutput is supported in AVCaptureSession as seen in documentation (copied snippet below) but then when AVCaptureDevice is configured with ProRes422 codec, it fails unless one of the two outputs is removed from the capture session. It is very much reproducible on iPhone 14 pro running iOS 26.0. Prior to iOS 16, you can add an AVCaptureVideoDataOutput and an AVCaptureMovieFileOutput to the same session, but only one may have its connection active. If you attempt to enable both connections, the system chooses the movie file output as the active connection and disables the video data output’s connection. For apps that link against iOS 16 or later, this restriction no longer exists.

Playback of any kind of HD H.264 MP4 files (720p, 50fps) could randomly cause a stalled image. Playback does not stop in such a case. Image is frozen/stalled. Audio goes on. Timeline goes on. By tapping play/pause or scrubbing in the timeline, the playback recovers. It could also happen, if you are scrubbing in the timeline, especially to areas not loaded already (progressive MP4 download). Behaviour is always the same: image is stalled/frozen, audio goes on. To reproduce: use example project https://developer.apple.com/documentation/AVKit/playing-video-content-in-a-standard-user-interface Example file: https://www.keepinmind.info/test.mp4

I’m building a macOS video editor that uses AVComposition and AVVideoComposition. Initially, my renderer creates a composition with some default video/audio tracks: @Published var composition: AVComposition? @Published var videoComposition: AVVideoComposition? @Published var playerItem: AVPlayerItem? Then I call a buildComposition() function that inserts all the default video segments. Later in the editing workflow, the user may choose to add their own custom video clip. For this I have a function like: private func handlePickedVideo(_ url: URL) { guard url.startAccessingSecurityScopedResource() else { print("Failed to access security-scoped resource") return } let asset = AVURLAsset(url: url) let videoTracks = asset.tracks(withMediaType: .video) guard let firstVideoTrack = videoTracks.first else { print("No video track found") url.stopAccessingSecurityScopedResource() return } renderer.insertUserVideoTrack(from: asset, track: firstVideoTrack) url.stopAccessingSecurityScopedResource() } What I want to achieve is the same behavior professional video editors provide, after the composition has already been initialized and built, the user should be able to add a new video track and the composition should update live, meaning the preview player should immediately reflect the changes without rebuilding everything from scratch manually. How can I structure my AVComposition / AVMutableComposition and my rendering pipeline so that adding a new clip later updates the existing composition in real time (similar to Final Cut/Adobe Premiere), instead of needing to rebuild everything from zero? You can find a playable version of this entire setup at :- https://github.com/zaidbren/SimpleEditor

I believe this should work: CFMutableDictionaryRef attrs = CFDictionaryCreateMutable(kCFAllocatorDefault, 0, &kCFTypeDictionaryKeyCallBacks, &kCFTypeDictionaryValueCallBacks); CFDictionaryAddValue(attrs, kCVImageBufferColorPrimariesKey, kCVImageBufferColorPrimaries_ITU_R_709_2); CFDictionaryAddValue(attrs, kCVImageBufferTransferFunctionKey, kCVImageBufferTransferFunction_ITU_R_709_2); CFDictionaryAddValue(attrs, kCVImageBufferYCbCrMatrixKey, kCVImageBufferYCbCrMatrix_ITU_R_709_2); CVPixelBufferRef pixelBuffer = NULL; CVPixelBufferCreate(kCFAllocatorDefault, width, height, kCVPixelFormatType_32ARGB, attrs, &pixelBuffer); assert(CFDictionaryGetCount(CVBufferGetAttachments(pixelBuffer, kCVAttachmentMode_ShouldPropagate)) > 0); But that last assert fails, so it appears the color info does not get attached. kCVImageBufferColorPrimariesKey and the others are not one of the keys listed under BufferAttributeKeys, but I think they're supposed to be allowed because they're listed by CMVideoFormatDescriptionGetExtensionKeysCommonWithImageBuffers(). I'm hoping that putting the color matrix info in there will control how AVAssetWriter converts the RGB to YCbCr.

I want to confirm if this is a bug or a programming error. Very easy to reproduce it by modifying AVCam sample code. Steps to reproduce: Add AVCaptureVideoDataOutput to AVCaptureSession, no need to set delegate in AVCam sample code (CaptureService actor) private let videoDataOutput = AVCaptureVideoDataOutput() and then in configureSession method, add the following line try addOutput(videoDataOutput) if videoDataOutput.availableVideoPixelFormatTypes.contains(kCVPixelFormatType_420YpCbCr8BiPlanarFullRange) { videoDataOutput.videoSettings = [kCVPixelBufferPixelFormatTypeKey as AnyHashable as! String : kCVPixelFormatType_420YpCbCr8BiPlanarFullRange] } And next modify set HDR method: /// Sets whether the app captures HDR video. func setHDRVideoEnabled(_ isEnabled: Bool) { // Bracket the following configuration in a begin/commit configuration pair. captureSession.beginConfiguration() defer { captureSession.commitConfiguration() } do { // If the current device provides a 10-bit HDR format, enable it for use. if isEnabled, let format = currentDevice.activeFormat10BitVariant { try currentDevice.lockForConfiguration() currentDevice.activeFormat = format currentDevice.unlockForConfiguration() isHDRVideoEnabled = true if videoDataOutput.availableVideoPixelFormatTypes.contains(kCVPixelFormatType_420YpCbCr10BiPlanarVideoRange) { videoDataOutput.videoSettings = [kCVPixelBufferPixelFormatTypeKey as AnyHashable as! String : kCVPixelFormatType_420YpCbCr10BiPlanarVideoRange] } } else { captureSession.sessionPreset = .high isHDRVideoEnabled = false if videoDataOutput.availableVideoPixelFormatTypes.contains(kCVPixelFormatType_32BGRA) { print("Setting sdr pixel format \(kCVPixelFormatType_32BGRA)") videoDataOutput.videoSettings = [kCVPixelBufferPixelFormatTypeKey as AnyHashable as! String : kCVPixelFormatType_32BGRA] } try currentDevice.lockForConfiguration() currentDevice.activeColorSpace = .sRGB currentDevice.unlockForConfiguration() } } catch { logger.error("Unable to obtain lock on device and can't enable HDR video capture.") } The problem now is toggling HDR on and off no longer works in video mode. If after setting HDR on, you set HDR to off, active format of device does not change (setting sessionPreset has no effect). This does not happen if video data output is not added to session. Is there any workaround available?

Avplayer encapsulates a player. After connecting to an Apple Bluetooth headset, it immediately reports an error. Non-Apple Bluetooth headsets can be played, but currently the issue is that the player works normally in one app but not in another. We are an educational app.

Hello, I requested Fairplay credentials a week ago. Where can I check the status of my request? Thank you very much. The team ID is: 6WZ8SVRYV9

Hello, As far as I know and in all of my testing there is no way for a user or a developer to change the frame rate of the video output on iPadOS. If you connect an iPad via a USB Hub or a USB to HDMI Adaptor and then connect it to an external monitor it will output at 59.94fps. I have a video app where a user monitors live video at 25fps and 30fps, they often output to an external display and there are times when the external display will stutter due to the mismatch in frame rate, ie. using 25fps and outputting at 59.94fps. I thought it was impossible to change the video output frame rate, then in V3.1 of the Blackmagic Camera App I saw an interesting change in their release notes: ‘Support for HDMI Monitoring at Sensor Rate and Resolution’ This means there is some way to modify it, not sure if this is done via a Private API that Apple has allowed Blackmagic to use. If so, how can we access this or is there a way to enable this that is undocumented? Thanks!

Hi, I have an app that displays tens of short (<1mb) mp4 videos stored in a remote server in a vertical UICollectionView that has horizontally scrollable sections. I'm caching all mp4 files on disk after downloading, and I also have a in-memory cache that holds a limited number (around 30) of players. The players I'm using are simple views that wrap an AVPlayerLayer and its AVPlayerItem, along with a few additional UI components. The scrolling performance was good before iOS 26, but with the release of iOS 26, I noticed that there is significant stuttering during scrolling while creating players with a fileUrl. It happens even if use the same video file cached on disk for each cell for testing. I also started getting this kind of log messages after the players are deinitialized: <<<< PlayerRemoteXPC >>>> signalled err=-12785 at <>:1107 <<<< PlayerRemoteXPC >>>> signalled err=-12785 at <>:1095 <<<< PlayerRemoteXPC >>>> signalled err=-12785 at <>:1095 There's also another log message that I see occasionally, but I don't know what triggers it. << FigXPC >> signalled err=-16152 at <>:1683 Is there anyone else that experienced this kind of problem with the latest release? Also, I'm wondering what's the best way to resolve the issue. I could increase the size of the memory cache to something large like 100, but I'm not sure if it is an acceptable solution because: 1- There will be 100 player instance in memory at all times. 2- There will still be stuttering during the initial loading of the videos from the web. Any help is appreciated!

hello, I'm using VideoTololbox VTFrameRateConversionConfiguration to perform frame interpolation: https://developer.apple.com/documentation/videotoolbox/vtframerateconversionconfiguration?language=objc ,when using 640x480 vidoe input, I got error: Error ! Invalid configuration [VEEspressoModel] build failure : flow_adaptation_feature_extractor_rev2.espresso.net. Configuration: landscape640x480 [EpsressoModel] Cannot load Net file flow_adaptation_feature_extractor_rev2.espresso.net. Configuration: landscape640x480 Error: failed to create FRCFlowAdaptationFeatureExtractor for usage 8 Failed to switch (0x12c40e140) [usage:8, 1/4 flow:0, adaptation layer:1, twoStage:0, revision:2, flow size (320x240)]. Could not init FlowAdaptation initFlowAdaptationWithError fail tried 2048x1080 is ok.

Is there limits on the supported dimension for VTLowLatencyFrameInterpolationConfiguration. Querying VTLowLatencyFrameInterpolationConfiguration.maximumDimensions and VTLowLatencyFrameInterpolationConfiguration.minimumDimensions returns nil. When I try the WWDC sample project EnhancingYourAppWithMachineLearningBasedVideoEffects with a 4k video this statement try frameProcessor.startSession(configuration: configuration) executes but try await frameProcessor.process(parameters: parameters) throws error Error Domain=VTFrameProcessorErrorDomain Code=-19730 "Processor is not initialized" UserInfo={NSLocalizedDescription=Processor is not initialized}. Also, why is VTLowLatencyFrameInterpolationConfiguration able to run while app is backgrounded but VTFrameRateConversionParameters can't (due to gpu usage)?