Hi, We were planning on using DriverKit to develop a USB Driver on IOS for iPhone. Within the DriverKit website, it say 'IOS16.0+' which lead us to believe it was compatible with iPhones running IOS16.0+. However, it appears DriverKit is only available for iPads running iPadOS, and computers running macOS. Are there any alternatives that would allow us to create a device specific USB driver for an iPhone running IOS?

We are preparing to implement document signing using USB tokens on iOS and macOS. Several other applications already support this feature. From my testing and development efforts, I've been unable to reliably access or utilize certificates stored on a smartcard through the iOS APIs. Here are the specifics: Environment iOS: 15 and later Xcode: Versions 18 and 26 Smartcard/Token: ePass 2003 (eMudhra), Feitien token (Capricorn) Observed Issue : The token is recognized at the system level, with certificates visible in Keychain Access. However, programmatic access to the private keys on the smartcard from within the app is not working. Signing attempts result in Error 6985 and CACC errors. Approaches Tried: Updated provisioning profiles with the following entitlements: com.apple.developer.smartcard com.apple.security.device.usb TKSmartCard Employed TKSmartCard and TKSmartCardSession for interaction. The token is detected successfully. A session can be established, but there's no straightforward method to leverage it for certificate-based signing. Access to signing functions is unavailable; operations yield Error 6985 or CACC errors. if let smartCard = TKSmartCard(slot: someSlot) { smartCard.openSession { session, error in if let session = session { let command: [UInt8] = [0x00, 0xA4, 0x04, 0x00] session.transmit(Data(command)) { response, error in print("Response: \(String(describing: response))") print("Error: \(String(describing: error))") } } } } TokenKit (macOS/iOS) - Utilized TKTokenWatcher to identify available tokens on macOS (not available on iOS). watcher.setInsertionHandler { tokenID in print("Token detected: \(tokenID)") } CryptoKit / Security Framework - Attempted to retrieve SecCertificate using SecItemCopyMatching queries, which succeeded on macOS but failed on iOS. let query: [CFString: Any] = [ kSecClass: kSecClassCertificate, kSecReturnRef: true, kSecMatchLimit: kSecMatchLimitAll ] var items: CFTypeRef? let status = SecItemCopyMatching(query as CFDictionary, &items) print("Status: \(status)") // macOS succeeds, iOS fails ExternalAccessory Framework (EAAccessory) * Investigated using EAAccessory and EASession for external token communication, but it did not function as expected. This functionality is critical for my project. Has anyone successfully implemented smartcard-based signing on iOS? Any guidance, sample code, or references to relevant Apple documentation would be greatly appreciated.

Hello, We have developed a hardware product that embeds an FTDI USB-serial converter, and an application on MacOS that communicates with this device. We would like to port our application to iPadOS. I can see that when I plug the device into the iPad, it is recognized as a serial port, based on its console logs. When I attempt to enumerate serial ports on iPadOS using IOKit, I can see matching IOSerialBSDClient services, but the properties are sandboxed, including the IOCalloutDevice property, for example: 0 error 16:36:10.922450-0700 kernel Sandbox: ***(662) deny(1) iokit-get-properties iokit-class:IOUserSerial property:IOTTYSuffix Is there an entitlement that can be applied that allows access to the serial port properties of an attached USB device? Or do I need to implement my own USBDriverKit driver for this device, as seems to be implied in these forum threads: https://developer.apple.com/forums/thread/795202 https://developer.apple.com/forums/thread/655527

1. 环境描述 (Environment) OS: macOS 26.2 Hardware: Apple Silicon (M1/M2/M3) DriverKit SDK: DriverKit 19.0 / 20.0 Arch: Universal (x86_64, arm64, arm64e) SIP Status: Enabled (Works perfectly when Disabled) 2. 问题现象 (Problem Description) 在开启 SIP 的环境下，USB 驱动扩展（Dext）能安装，但插入设备时无法连接设备（驱动的Start方法未被调用）。 驱动状态： MacBook-Pro ~ % systemextensionsctl list 1 extension(s) --- com.apple.system_extension.driver_extension (Go to 'System Settings > General > Login Items & Extensions > Driver Extensions' to modify these system extension(s)) enabled active teamID bundleID (version) name [state] * * JK9U78YRLU com.ronganchina.usbapp.MyUserUSBInterfaceDriver (1.3/4) com.ronganchina.usbapp.MyUserUSBInterfaceDriver [activated enabled] 关键日志证据 (Key Logs) KernelManagerd: Error Domain=NSPOSIXErrorDomain Code=8 "Exec format error" Syspolicyd: failed to fetch ... /_CodeSignature/CodeRequirements-1 error=-10 AppleSystemPolicy: ASP: Security policy would not allow process DriverKit Kernel: DK: MyUserUSBInterfaceDriver user server timeout dext的 embedded.provisionprofile 已包含： com.apple.developer.driverkit com.apple.developer.driverkit.transport.usb (idVendor: 11977)

This is my first driver and I have had the devil of a time trying to find any information to help me with this. I beg help with this, since I cannot find any tutorials that will get me over this problem. I am attempting to write a bridging driver for an older UPS that only communicates via RPC-over-USB rather than the HID Power Device class the OS requires. I have written the basic framework for the driver (details below) and am calling OSSystemExtensionRequest.submitRequest with a request object created by OSSystemExtensionRequest.activationRequest, but the didFailWithError callback is called with OSSystemExtensionErrorDomain of a value of 9, which appears to be a general failure to activate the driver. I can find no other information on how to address this issue, but I presume the issue is one of entitlements in either the entitlements file or Info.plist. I will have more code-based details below. For testing context, I am testing this on a 2021 iMac (M1) running Sequoia 15.7, and this iMac is on MDM, specifically Jamf. I have disabled SIP and set systemextensionsctl developer on, per the instructions here, and I have compiled and am attempting to debug the app using xcode 26.2. The driver itself targets DriverKit 25, as 26 does not appear to be available in xcode despite hints on google that it's out. For the software, I have a two-target structure in my xcode project, the main Manager app, which is a swift-ui app that both handles installation/activation of the driver and (if that finally manages to work) handles communication from the driver via its UserClient, and the driver which compiles as a dext. Both apps compile and use automated signing attached to our Apple Development team. I won't delve into the Manager app much, as it runs even though activation fails, except to include its entitlements file in case it proves relevant <dict> <key>com.apple.developer.driverkit.communicates-with-drivers</key> <true/> <key>com.apple.developer.system-extension.install</key> <true/> <key>com.apple.security.app-sandbox</key> <true/> <key>com.apple.security.files.user-selected.read-only</key> <true/> </dict> and the relevant activation code: func request(_ request: OSSystemExtensionRequest, didFailWithError error: any Error) { // handling the error, which is always code value 9 } func activateDriver() { let request = OSSystemExtensionRequest.activationRequest(forExtensionWithIdentifier: "com.mycompany.driver.bundle.identifier", queue: .main) request.delegate = self OSSystemExtensionManager.shared.submitRequest(request) //... } And finally the Manager app has the following capabilities requested for its matching identifier in our Apple Developer Account: DriverKit Communicates with Drivers System Extension On the Driver side, I have two major pieces, the main driver class MyDriver, and UserClient class, StatusUserClient. MyDriver derives from IDriverKit/IOService.iig but (in case this is somehow important) does not have the same name as the project/target name MyBatteryDriver. StatusUserClient derives from DriverKit/IOUserClient.iig. I have os_log(OS_LOG_DEFAULT, "trace messages") code in every method of both classes, including the initializers and Start implementations, and the log entries never seem to show up in Console, so I presume that means the OS never tried to load the driver. Unless I'm looking in the wrong place? Because I don't think the driver code is the current issue, I won't go into it unless it becomes necessary. As I mentioned above, I think this is a code signing / entitlements issue, but I don't know how to resolve it. In our Apple Developer account, the Driver's matching identifier has the following capabilities requested: DriverKit (development) DriverKit Allow Any UserClient (development) DriverKit Family HID Device (development) -- NOTE: this is planned for future use, but not yet implemented by my driver code. Could that be part of the problem? DriverKit Transport HID (development) DriverKit USB Transport (development) DriverKit USB Transport - VendorID -- submitted, no response from Apple yet HID Virtual Device -- submitted, no response from Apple. yet. This is vestigial from an early plan to build the bridge via shared memory funneling to a virtual HID device. I think I've found a way to do it with one Service, but... not sure yet. Still, that's a problem for tomorrow. Apparently I've gone over the 7000 character maximum so I will add my entitlements and info.plist contents in a reply.

I am writing a DriverKit driver for the first that uses the USBSerialDriverKit. The driver its purpose is to expose the device as serial interface (/dev/cu.tetra-pei0 or something like this). My problem: I don't see any logs from that driver in the console and I tried like 40 different approaches and checked everything. The last message I see is that the driver get successfully added to the system it is in the list of active and enabled system driver extensions but when I plug the device in none of my logs appear and it doesn't show up in ioreg. So without my driver the target device looks like this: +-o TETRA PEI interface@02120000 <class IOUSBHostDevice, id 0x10000297d, registered, matched, active, busy 0 (13 ms), retain 30> | { | "sessionID" = 268696051410 | "USBSpeed" = 3 | "UsbLinkSpeed" = 480000000 | "idProduct" = 36886 | "iManufacturer" = 1 | "bDeviceClass" = 0 | "IOPowerManagement" = {"PowerOverrideOn"=Yes,"DevicePowerState"=2,"CurrentPowerState"=2,"CapabilityFlags"=32768,"MaxPowerState"=2,"DriverPowerState"=0} | "bcdDevice" = 9238 | "bMaxPacketSize0" = 64 | "iProduct" = 2 | "iSerialNumber" = 0 | "bNumConfigurations" = 1 | "UsbDeviceSignature" = <ad0c16901624000000ff0000> | "USB Product Name" = "TETRA PEI interface" | "locationID" = 34734080 | "bDeviceSubClass" = 0 | "bcdUSB" = 512 | "USB Address" = 6 | "kUSBCurrentConfiguration" = 1 | "IOCFPlugInTypes" = {"9dc7b780-9ec0-11d4-a54f-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"} | "UsbPowerSinkAllocation" = 500 | "bDeviceProtocol" = 0 | "USBPortType" = 0 | "IOServiceDEXTEntitlements" = (("com.apple.developer.driverkit.transport.usb")) | "USB Vendor Name" = "Motorola Solutions, Inc." | "Device Speed" = 2 | "idVendor" = 3245 | "kUSBProductString" = "TETRA PEI interface" | "kUSBAddress" = 6 | "kUSBVendorString" = "Motorola Solutions, Inc." | } | +-o AppleUSBHostCompositeDevice <class AppleUSBHostCompositeDevice, id 0x100002982, !registered, !matched, active, busy 0, retain 5> | { | "IOProbeScore" = 50000 | "CFBundleIdentifier" = "com.apple.driver.usb.AppleUSBHostCompositeDevice" | "IOProviderClass" = "IOUSBHostDevice" | "IOClass" = "AppleUSBHostCompositeDevice" | "IOPersonalityPublisher" = "com.apple.driver.usb.AppleUSBHostCompositeDevice" | "bDeviceSubClass" = 0 | "CFBundleIdentifierKernel" = "com.apple.driver.usb.AppleUSBHostCompositeDevice" | "IOMatchedAtBoot" = Yes | "IOMatchCategory" = "IODefaultMatchCategory" | "IOPrimaryDriverTerminateOptions" = Yes | "bDeviceClass" = 0 | } | +-o lghub_agent <class AppleUSBHostDeviceUserClient, id 0x100002983, !registered, !matched, active, busy 0, retain 7> | { | "IOUserClientCreator" = "pid 1438, lghub_agent" | "IOUserClientDefaultLocking" = Yes | } | +-o IOUSBHostInterface@0 <class IOUSBHostInterface, id 0x100002986, registered, matched, active, busy 0 (5 ms), retain 9> | | { | | "USBPortType" = 0 | | "IOCFPlugInTypes" = {"2d9786c6-9ef3-11d4-ad51-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"} | | "USB Vendor Name" = "Motorola Solutions, Inc." | | "bcdDevice" = 9238 | | "USBSpeed" = 3 | | "idProduct" = 36886 | | "IOServiceDEXTEntitlements" = (("com.apple.developer.driverkit.transport.usb")) | | "bInterfaceSubClass" = 0 | | "bConfigurationValue" = 1 | | "locationID" = 34734080 | | "USB Product Name" = "TETRA PEI interface" | | "bInterfaceProtocol" = 0 | | "iInterface" = 0 | | "bAlternateSetting" = 0 | | "idVendor" = 3245 | | "bInterfaceNumber" = 0 | | "bInterfaceClass" = 255 | | "bNumEndpoints" = 2 | | } | | | +-o lghub_agent <class AppleUSBHostInterfaceUserClient, id 0x100002988, !registered, !matched, active, busy 0, retain 6> | { | "UsbUserClientBufferStatistics" = {"IOMemoryDescriptor"=0,"IOBufferMemoryDescriptor"=0,"IOSubMemoryDescriptor"=0} | "IOUserClientCreator" = "pid 1438, lghub_agent" | "UsbUserClientBufferAllocations" = {"Bytes"=0,"Descriptors"=0} | "IOUserClientDefaultLocking" = Yes | } | +-o IOUSBHostInterface@1 <class IOUSBHostInterface, id 0x100002987, registered, matched, active, busy 0 (5 ms), retain 9> | { | "USBPortType" = 0 | "IOCFPlugInTypes" = {"2d9786c6-9ef3-11d4-ad51-000a27052861"="IOUSBHostFamily.kext/Contents/PlugIns/IOUSBLib.bundle"} | "USB Vendor Name" = "Motorola Solutions, Inc." | "bcdDevice" = 9238 | "USBSpeed" = 3 | "idProduct" = 36886 | "IOServiceDEXTEntitlements" = (("com.apple.developer.driverkit.transport.usb")) | "bInterfaceSubClass" = 0 | "bConfigurationValue" = 1 | "locationID" = 34734080 | "USB Product Name" = "TETRA PEI interface" | "bInterfaceProtocol" = 0 | "iInterface" = 0 | "bAlternateSetting" = 0 | "idVendor" = 3245 | "bInterfaceNumber" = 1 | "bInterfaceClass" = 255 | "bNumEndpoints" = 2 | } | +-o lghub_agent <class AppleUSBHostInterfaceUserClient, id 0x10000298a, !registered, !matched, active, busy 0, retain 6> { "UsbUserClientBufferStatistics" = {"IOMemoryDescriptor"=0,"IOBufferMemoryDescriptor"=0,"IOSubMemoryDescriptor"=0} "IOUserClientCreator" = "pid 1438, lghub_agent" "UsbUserClientBufferAllocations" = {"Bytes"=0,"Descriptors"=0} "IOUserClientDefaultLocking" = Yes } more details in my comment.

I have a driver extending IOUserUSBSerial and I want the device to show up as /dev/tty.mycustombasename-123 and /dev/cu. respectively. How can I achieve that?

We are trying to determine whether a third-party DriverKit HID dext can seize or intercept raw HID input reports from an external mouse through any top case–related path in the HID stack. Our dext is based on IOUserHIDEventDriver, and the goal is to receive raw input reports before they are translated into higher-level pointer events. Apple’s public HIDDriverKit documentation describes IOUserHIDEventDriver as the driver object responsible for dispatching pointer, digitizer, scrolling, and related HID-originated events, but it is not clear to us whether any “top case” path is actually exposed or supported for third-party matching in DriverKit. What we want to clarify is specifically about external mouse devices, not the built-in trackpad itself. Questions: Is there any officially supported way for a third-party DriverKit HID dext to bind through a top case–related path and receive raw HID input reports from an external mouse? Is “top case” something that third-party DriverKit drivers can meaningfully target for matching/attachment, or is it only an internal Apple implementation detail? If such a path exists, can it be used to seize raw reports before they are converted into higher-level pointer events? If not, what is the officially supported boundary for third-party DriverKit access to raw reports from external mouse-class HID devices? To be clear, we are not asking about synthesizing pointer events. We are asking whether a third-party DriverKit dext can directly observe or seize the original HID input reports from an external mouse by attaching through any top case–related portion of the HID stack. If “top case” is not a public DriverKit concept that third parties can target, confirmation of that would also be very helpful.