Invalid code signature problem with Xcode12

I'm practicing a swift 5 class, and have this issue:

Could not launch “I AM RICH”

Domain: IDEDebugSessionErrorDomain

Code: 3

Failure Reason: The operation couldn’t be completed. Unable to launch com.superdie.I-AM-RICH because it has an invalid code signature, inadequate entitlements or its profile has not been explicitly trusted by the user.

User Info: {

    DVTRadarComponentKey = 855031;

    RawLLDBErrorMessage = "The operation couldn\U2019t be completed. Unable to launch com.superdie.I-AM-RICH because it has an invalid code signature, inadequate entitlements or its profile has not been explicitly trusted by the user.";

}

I'm not sure what can I do, some help would be nice :)
Post not yet marked as solved Up vote post of Rimbaud Down vote post of Rimbaud
16k views
  • Hello there, I am currently on iOS 15 beta. When I deploy the app for debugging, it also shows "invalid signature", but I can't find "Trust" in Device Management. Can somebody please help me?

  • Did you find the solution to this, encountering this same issue

  • Device Management is when you are in a MDDM environment. If the problem is the same as for the initial post, you should open the project in Xcode, select the project name (blue icon), select "TARGEYS" go to signing and capabilities Tab and check information there.

Answers

I found the solution. Go to your Iphone Settings -> General -> Device Management and "trust" yourself as developer.

I hope it fixes your issue. I did to me.

Cheers.
Thanks a lot! Solved my issue

I found the solution. Go to your Iphone Settings -> General -> Device Management and "trust" yourself as developer.

I hope it fixes your issue. I did to me.

Cheers.


Thank you, Worked for me!




I don't see Device Management anywhere on my iPhone. This stuff is ridiculous to set up.
  • you can find same option VPN & Device Management select the option then you will find your Xcode email click on it and press trust. hope this will be helpful

Add a Comment
Thanks a ton! solved it for me
thanks a lot ,that save me
Thanks.
Great work! Thank you!
Thank you, the reply to this was very helpful. My app used to run on my iPhone, but then it didn't.

hi everyone ... it also gives me the following error message when i try to install my app from xcode to my iphone 11:

The operation couldn’t be completed. Unable to launch it.thinCodeApplicationss.FA-Haircut because it has an invalid code signature, inadequate entitlements or its profile has not been explicitly trusted by the user.

I don't understand what's going on ...

I tried to go to settings> general> VPN and device management but I have nothing inside it I only have the possibility to log in with a work or school account and nothing else .. my app does not appear in the VPN and device management section therefore I cannot authorize anything ...

how can i solve?

Same problem here.. after update iPhone and iPad updated to Version 15 and Xcode to version 13.. Tried from imac and from MacBookPro..

Creating a new Apple Dev ID works, but this isn't really an option..

Perhaps someone from Apple could gibe a hint, as they didn't answer on mail requests either..

  • Did you find a solution?

Add a Comment

Actually installing own Xcode created Cert on iOS 15 seam not to work any more, still got the error also after installing the cert.

Details

Could not launch “fak10”

Domain: IDEDebugSessionErrorDomain

Code: 3

Failure Reason: The operation couldn’t be completed. Unable to launch org.reactjs.native.example.fak10 because it has an invalid code signature, inadequate entitlements or its profile has not been explicitly trusted by the user.

User Info: {

    DVTRadarComponentKey = 855031;

    IDERunOperationFailingWorker = DBGLLDBLauncher;

    RawUnderlyingErrorMessage = "The operation couldn\U2019t be completed. Unable to launch org.reactjs.native.example.fak10 because it has an invalid code signature, inadequate entitlements or its profile has not been explicitly trusted by the user.";

}

--

Analytics Event: com.apple.dt.IDERunOperationWorkerFinished : {

    "device_model" = "iPhone13,2";

    "device_osBuild" = "15.0.1 (19A348)";

    "device_platform" = "com.apple.platform.iphoneos";

    "launchSession_schemeCommand" = Run;

    "launchSession_state" = 1;

    "launchSession_targetArch" = arm64;

    "operation_duration_ms" = 6377;

    "operation_errorCode" = 3;

    "operation_errorDomain" = IDEDebugSessionErrorDomain;

    "operation_errorWorker" = DBGLLDBLauncher;

    "operation_name" = IDEiPhoneRunOperationWorkerGroup;

    "param_consoleMode" = 0;

    "param_debugger_attachToExtensions" = 0;

    "param_debugger_attachToXPC" = 1;

    "param_debugger_type" = 5;

    "param_destination_isProxy" = 0;

    "param_destination_platform" = "com.apple.platform.iphoneos";

    "param_diag_MainThreadChecker_stopOnIssue" = 0;

    "param_diag_MallocStackLogging_enableDuringAttach" = 0;

    "param_diag_MallocStackLogging_enableForXPC" = 1;

    "param_diag_allowLocationSimulation" = 1;

    "param_diag_gpu_frameCapture_enable" = 0;

    "param_diag_gpu_shaderValidation_enable" = 0;

    "param_diag_gpu_validation_enable" = 0;

    "param_diag_memoryGraphOnResourceException" = 0;

    "param_diag_queueDebugging_enable" = 1;

    "param_diag_runtimeProfile_generate" = 0;

    "param_diag_sanitizer_asan_enable" = 0;

    "param_diag_sanitizer_tsan_enable" = 0;

    "param_diag_sanitizer_tsan_stopOnIssue" = 0;

    "param_diag_sanitizer_ubsan_stopOnIssue" = 0;

    "param_diag_showNonLocalizedStrings" = 0;

    "param_diag_viewDebugging_enabled" = 1;

    "param_diag_viewDebugging_insertDylibOnLaunch" = 1;

    "param_install_style" = 0;

    "param_launcher_UID" = 2;

    "param_launcher_allowDeviceSensorReplayData" = 0;

    "param_launcher_kind" = 0;

    "param_launcher_style" = 0;

    "param_launcher_substyle" = 0;

    "param_runnable_appExtensionHostRunMode" = 0;

    "param_runnable_productType" = "com.apple.product-type.application";

    "param_runnable_swiftVersion" = "5.5";

    "param_runnable_type" = 2;

    "param_testing_launchedForTesting" = 0;

    "param_testing_suppressSimulatorApp" = 0;

    "param_testing_usingCLI" = 0;

    "sdk_canonicalName" = "iphoneos15.0";

    "sdk_osVersion" = "15.0";

    "sdk_variant" = iphoneos;

}

--

System Information

macOS Version 11.6 (Build 20G165)

Xcode 13.0 (19234) (Build 13A233)

Timestamp: 2021-10-07T12:45:35+02:00

  • Did you find a solution other than creating a new account?

Add a Comment

I had the same issue, I just created a new Project with the sample Hello world, deployed it to the device and it worked. I then deployed my desired app and it started working.

I hope this helps.

  • thx, I'll try that

  • Thanks Elisioff!!! Creating a new project then opening my old project worked!

Add a Comment