How does VMWare access USB devices without have any specifics of the USB device? Does it use the same profile/entitlement process or does it take a different approach?

=1) The situation: 1A) I make both a "DExt" and a "SDK" for still-imaging-USB-gadgets and MACOS>=14 ,iPADOS>=17 1B) One of the USB-gadgets needs warm_up after PlugIn (i.e End-User-App must know "now-TheMomentOfPlugIn" with precision ~1sec). =2) The question is how to do "1B" rationally? =3) My speculative guess: in BSD-descendant I expect existence (somewhere) of a "normal file" through "macports etc", which has normal "file creation time". Such a "file creation time" (accessible better via IORegistryEntry... at SDK-level; possibly via IOUSBHostInterface at DExt-level) is cognitive target of mine. =4) Additional constraints: Technically absent. I freely modify code either DExt (descendant of IOUSBHostInterface) or SDK-level (IORegistryEntryGetRegistryEntryID, IORegistryEntry...)

Hello team, I am using USBDriverKit and Driverkit framework in my application for communication of USB device. After updating my iPad OS to 18 public beta, I am unable to get option to enable drivers in my setting page of my application. However, I am able to see that options in developer beta version of iPad OS 18. Can anyone guide me, how should I proceed further as I am unable to use my USB devices.

Hi, We’re developing a DriverKit extension for iPadOS. In local Debug and Release builds, everything works as expected, but the same build uploaded to TestFlight fails at IOServiceOpen with the following errors: -536870212 (0xE00002EC) kIOReturnUnsupported -536870201 (0xE00002F7) kIOReturnNotPermitted What we’ve verified so far App entitlements We checked our main app entitlements file, and it has the correct capabilities for the driverkit communication <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>com.apple.developer.driverkit.communicates-with-drivers</key> <true/> <key>com.apple.developer.driverkit.userclient-access</key> <array> <string>abc.def.ABCDriver</string> </array> <key>com.apple.developer.system-extension.install</key> <true/> <key>com.apple.security.app-sandbox</key> <true/> <key>com.apple.security.device.usb</key> <true/> <key>com.apple.security.files.user-selected.read-write</key> <true/> </dict> </plist> we also checked the Provisioning profile (as shown on the portal) and the “Enabled Capabilities” seems to have the correct DriverKit Capabilities enabled. Enabled Capabilities Access Wi-Fi Information, DriverKit, DriverKit (development), DriverKit Communicates with Drivers, DriverKit USB Transport (development), DriverKit USB Transport - VendorID, DriverKit UserClient Access, iCloud, In-App Purchase, Sign In with Apple, System Extension When we download and inspect the provisioning profile as plain text, we notice that some expected DriverKit entitlements appear to be missing from the section. <key>Entitlements</key> <dict> <key>beta-reports-active</key> <true/> <key>com.apple.developer.networking.wifi-info</key> <true/> <key>com.apple.developer.driverkit</key> <true/> <key>com.apple.developer.driverkit.communicates-with-drivers</key> <true/> <key>application-identifier</key> <string>ABC123456.abc.def</string> <key>keychain-access-groups</key> <array> <string>ABC123456.*</string> <string>com.apple.token</string> </array> <key>get-task-allow</key> <false/> <key>com.apple.developer.team-identifier</key> <string>ABC123456</string> <key>com.apple.developer.ubiquity-kvstore-identifier</key> <string>ABC123456.*</string> <key>com.apple.developer.icloud-services</key> <string>*</string> <key>com.apple.developer.icloud-container-identifiers</key> <array></array> <key>com.apple.developer.icloud-container-development-container-identifiers</key> <array></array> <key>com.apple.developer.ubiquity-container-identifiers</key> <array></array> <key>com.apple.developer.driverkit.transport.usb</key> <array> <dict> <key>idVendor</key> <integer>1234</integer> </dict> </array> <key>com.apple.developer.applesignin</key> <array> <string>Default</string> </array> </dict> We have a couple of questions: Could the missing com.apple.developer.driverkit.userclient-access entitlement in the provisioning profile alone explain the kIOReturnUnsupported / kIOReturnNotPermitted failures from IOServiceOpen? Why do some DriverKit capabilities appear in the Apple Developer portal UI but vanish from the actual profile we download? Is there an extra step we’re overlooking when regenerating profiles after toggling those capabilities? Thanks

I've tried on multiple occasions to add a message on to the request form for a vendor ID, but it always comes back with just the one default. I read in another post that they got it done through the Feedback Assistant, but that hasn't worked for me. Does anyone have any other ideas? Between us and our parent company, I need three vendor IDs.

Hi everyone, I was following the Video Modernize PCI and SCSI drivers with DriverKit and the Document to implement UserMapHBAData(), and here’s my current implementation: // kern_return_t DRV_MAIN_CLASS_NAME::UserMapHBAData_Impl(uint32_t *uniqueTaskID) kern_return_t IMPL(DRV_MAIN_CLASS_NAME, UserMapHBAData) { Log("UserMapHBAData() - Start"); // Define the vm_page_size explicitly const uint32_t vm_page_size = 4096; kern_return_t ret; IOBufferMemoryDescriptor *buffer = nullptr; IOMemoryMap *memMap = nullptr; void *taskData = nullptr; // Create a buffer for HBA-specific task data ret = IOBufferMemoryDescriptor::Create(kIOMemoryDirectionOutIn, ivars->fTaskDataSize, vm_page_size, &buffer); __Require((kIOReturnSuccess == ret), Exit); // Map memory to the driver extension's memory space ret = buffer->CreateMapping(0, 0, 0, 0, 0, &memMap); __Require((kIOReturnSuccess == ret), Exit); // Retrieve mapped memory address taskData = reinterpret_cast<void *>(memMap->GetAddress()); __Require(taskData, Exit); // WARNING: Potential leak of an object stored into 'buffer' // WARNING: Potential leak of an object stored into 'memMap' // Assign a unique task ID ivars->fTaskID++; // ERROR: No member named 'fTaskID' in 'DriverKitAcxxx_IVars' ivars->fTaskArray[ivars->fTaskID] = taskData; *uniqueTaskID = ivars->fTaskID; Log("UserMapHBAData() - End"); return kIOReturnSuccess; Exit: // Cleanup in case of failure if (memMap) { memMap->free(); // Correct method for releasing memory maps } if (buffer) { buffer->free(); // Correct method for releasing buffer memory } LogErr("ret = 0x%0x", ret); Log("UserMapHBAData() - End"); return ret; } For reference, in KEXT, memory allocation is typically done using: IOBufferMemoryDescriptor *buffer = IOBufferMemoryDescriptor::inTaskWithOptions( kernel_task, // Task in which memory is allocated kIODirectionOutIn, // Direction (read/write) 1024, // Size of the buffer in bytes 4); // Alignment requirements However, after installing the dext, macOS hangs, and I have to do a hardware reset. After rebooting, the sysctl list output shows: % sectl list 1 extension(s) --- com.apple.system_extension.driver_extension enabled active teamID bundleID (version) name [state] * - com.accusys.DriverKitAcxxx (5.0/11) com.accusys.DriverKitAcxxx [activated waiting for user] Questions: What could be causing macOS to halt? How should I approach debugging and resolving this issue? Looking forward to your insights, any suggestions would be greatly appreciated! Best regards, Charles

I'm working on a DriverKit driver. I have it running on macOS, including a very simple client app written in SwiftUI. Everything is working fine there. I've added iPadOS as a destination for the app as demonstrated in the WWDC video on DriverKit for iPadOS. The app builds and runs on my iPad, as expected (after a little work to conditionalize out my use of SystemExtensions.framework for installation on macOS). However, after installing and running the app on an iPad, the driver does not show up in Settings->General, nor in the app-specific settings pane triggered by the inclusion of a settings bundle in the app. I've confirmed that the dext is indeed being included in the app bundle when built for iPadOS (in MyApp.app/SystemExtensions/com.me.MyApp.MyDriver.dext). I also can see in the build log that there's a validation step for the dext, and that seems to be succeeding. I don't know why the app isn't being discovered -- or in any case surfaced to the user -- when the app is installed on the iPad. Has anyone faced this problem and solved it? Are there ways to troubleshoot installation/discovery of an embedded DriverKit extensions on iOS? Unlike on macOS, I don't really see any relevant console messages.

Hello, forum, I'm trying to build connection between a non-MFi HID device (like keyboard) and iOS app with IOKit and Swift. Thanks to this post, I have manage to import the IOKit into objc header. IOKit on iOS/iPadOS 16.0+ #import <IOKit/IOKitLib.h> However, I have this compiler error when I try to imitate same methods in the SerialPortSaple project from following article, but the IOKit can not be imported to Swift at first place. Communicating with a Modem on a Serial Port The screen shot of the sample project: It looks like the complier unable to reach the io_object_t type somehow, is there any workaround or approach?

Hi, I am trying to develop MacOS application which will be connecting to USB devices and should be available in AppStore. So it must be Sandbox and probably I've to use permission com.apple.security.device.usb. I've following requirements: I need to detect USB devices with file system I need to have ability to upload & download files from this device I need to read device serial number I wonder if I can use IOKit for this and it will be compliant with AppStore rules or not?

Hi Everybody, Follow Communicating between a DriverKit extension and a client app to migrate our kext to dext. The dext might have been loaded successfully by using the command systemextensionsctl list, the dext is loaded and enabled. % sectl list 1 extension(s) --- com.apple.system_extension.driver_extension enabled active teamID bundleID (version) name [state] * * K3TDMD9Y6B com.accusys.scsidriver (1.0/1) com.accusys.scsidriver [activated enabled] We try to use the CppUserClient.cpp to communicate with the dext, but can not get the dext service. The debug message as below: Failed opening service with error: 0xe00002c7. Here is the part of CppUserClient.cpp static const char* dextIdentifier = "com.accusys.scsidriver"; kern_return_t ret = kIOReturnSuccess; io_iterator_t iterator = IO_OBJECT_NULL; io_service_t service = IO_OBJECT_NULL; ret = IOServiceGetMatchingServices(kIOMasterPortDefault, IOServiceMatching("IOUserServer"), &iterator); printf("dextIdentifier = %s\n", dextIdentifier); printf("IOServiceNameMatching return = %d\n", ret); if (ret != kIOReturnSuccess) { printf("Unable to find service for identifier with error: 0x%08x.\n", ret); PrintErrorDetails(ret); } printf("Searching for dext service...\n"); while ((service = IOIteratorNext(iterator)) != IO_OBJECT_NULL) { // Open a connection to this user client as a server to that client, and store the instance in "service" ret = IOServiceOpen(service, mach_task_self_, kIOHIDServerConnectType, &connection); if (ret == kIOReturnSuccess) { printf("\tOpened service.\n"); break; } else { printf("\tFailed opening service with error: 0x%08x.\n", ret); } IOObjectRelease(service); } IOObjectRelease(iterator); if (service == IO_OBJECT_NULL) { printf("Failed to match to device.\n"); return EXIT_FAILURE; } The console output message is dextIdentifier = com.accusys.scsidriver IOServiceNameMatching return = 0 Searching for dext service... Failed opening service with error: 0xe00002c7. Failed opening service with error: 0xe00002c7. Failed opening service with error: 0xe00002c7. Failed opening service with error: 0xe00002c7. Failed to match to device. Here is the log show message fredapp start UserInitializeController pcitest: fredapp pci vendorID: 14d6 deviceID: 626f fredapp nnnnnew configuaration read32 0x10 info: 1 fredapp nnnnnew configuaration read32 0x14 info: 80100004 fredapp new 128 before enable busmaster ReqMSGport_info 0x00000040 : fffff pcitest: fredapp 131 pci ConfigurationRead16 busmaster value 0 pcitest: fredapp 134 Enable BusMaster and IO space done...... locate 139 fredapp MemoryWrite32 function done...... fredapp new 143 after enable busmaster ReqMSGport_info 0x00000040 : 0 fredapp newwww before GetBARInfo memoryIndex1 info is: 5 fredapp GetBARInfo 1 kernel return status is: 0 fredapp GetBARInfo memoryIndex1 info is: 0 fredapp GetBARInfo barSize1 info is: 262144 fredapp GetBARInfo barType1 info is: 0 fredapp GetBARInfo result0 info is: 3758097136 fredapp GetBARInfo memoryIndex0 info is: 0 fredapp GetBARInfo barSize0 info is: 0 fredapp GetBARInfo barType0 info is: 0 pcitest: newwww fredapp againnnn test ReqMSGport info: 8 fredapp Start MPIO_Init_Prepare fredapp end MPIO_Init_Prepare. fredapp call 741 Total_memory_size: 1bb900 fredapp Start MemoryAllocationForAME_Module. fredapp IOBufferMemoryDescriptor create return status info is kIOReturnSuc fredapp IOBufferMemoryDescriptor virtualAddressSegment address info: 0x1 fredapp virtualAddressSegment length info: 0x00080000 fredapp end IOBufferMemoryDescriptor Create. fredapp dmaSpecification maxAddressBits: 0x00000000 fredapp dmaSpecification maxAddressBits: 0x00000027 fredapp IODMACommand create return status info is kIOReturnSuccess fredapp end IODMACommand Create. fredapp PrepareForDMA return status info is kIOReturnSuccess fredapp PrepareForDMA return status info is 0x00000000 fredapp Allocate memory PrepareforDMA return flags info: 0x00000003 fredapp Allocate memory PrepareforDMA return segmentsCount info: 0x00000 fredapp Allocate memory PrepareforDMA return physicalAddressSegment info: fredapp IOBufferMemoryDescriptor virtualAddressSegment address info-2: 0 fredapp verify data success init() - Finished. fredapp start UserGetDMASpecification fredapp end UserGetDMASpecification fredapp start UserMapHBAData fredapp end UserMapHBAData fredapp start UserStartController fredapp interruptType info is 0x00010000 fredapp PCI Dext interrupt final value return status info is 0x00000000 Any suggestions? Best Regards, Charles

Hello every one good day :) My project uses a mouse driver handling all events from the mouse produced by our company. In the past the driver is a kext, which implement acceleration by HIDPointerAccelerationTable, we prepare data in the driver's info.plist, while our app specifies a value to IOHIDSystem with key kIOHIDPointerAccelerationKey, the driver will call copyAccelerationTable() to lookup the HIDPointerAccelerationTable and return a value. In current DriverKit area, the process above is deprecated. Now I don't know to do. I've read some document: https://developer.apple.com/documentation/hiddriverkit/iohidpointereventoptions/kiohidpointereventoptionsnoacceleration?changes=__7_8 https://developer.apple.com/documentation/hiddriverkit/kiohidmouseaccelerationtypekey?changes=__7_8 https://developer.apple.com/documentation/hiddriverkit/kiohidpointeraccelerationkey?changes=__7_8 but no any description in those articles. Please help!

Hello Everyone, I'm encountering an issue while setting up a timer event in DriverKit and would appreciate any guidance. Here's my current implementation: void DRV_MAIN_CLASS_NAME::SetupEventTimer() { // 1. Create dispatch queue kern_return_t ret = IODispatchQueue::Create("TimerQueue", 0, 0, &ivars->dispatchQueue); if (ret != kIOReturnSuccess) { LogErr("Failed to create dispatch queue: 0x%x", ret); return; } // 2. Create timer source ret = IOTimerDispatchSource::Create(ivars->dispatchQueue, &ivars->dispatchSource); if (ret != kIOReturnSuccess) { LogErr("Failed to create timer: 0x%x", ret); OSSafeReleaseNULL(ivars->dispatchQueue); return; } /*! * @brief Create an instance of OSAction. * @discussion Methods to allocate an OSAction instance are generated for each method defined in a class with * a TYPE attribute, so there should not be any need to directly call OSAction::Create(). * @param target OSObject to receive the callback. This object will be retained until the OSAction is * canceled or freed. * @param targetmsgid Generated message ID for the target method. * @param msgid Generated message ID for the method invoked by the receiver of the OSAction * to generate the callback. * @param referenceSize Size of additional state structure available to the creator of the OSAction * with GetReference. * @param action Created OSAction with +1 retain count to be released by the caller. * @return kIOReturnSuccess on success. See IOReturn.h for error codes. */ // 3: Create an OSAction for the TimerOccurred method // THIS IS WHERE I NEED HELP OSAction* timerAction = nullptr; ret = OSAction::Create(this, 0, 0, 0, &timerAction); if (ret != kIOReturnSuccess) { LogErr("Failed to create OSAction: 0x%x", ret); goto cleanup; } // 4. Set handler ret = ivars->dispatchSource->SetHandler(timerAction); if (ret != kIOReturnSuccess) { LogErr("Failed to set handler: 0x%x", ret); goto cleanup; } // 5. Schedule timer (1 second) uint64_t deadline = mach_absolute_time() + NSEC_PER_SEC; ivars->dispatchSource->WakeAtTime(0, deadline, 0); cleanup: if (ret != kIOReturnSuccess) { OSSafeReleaseNULL(timerAction); OSSafeReleaseNULL(ivars->dispatchSource); OSSafeReleaseNULL(ivars->dispatchQueue); } } Problem: The code runs but the OSAction callback binding seems incorrect (Step 3). According to the OSAction documentation, I need to use the TYPE macro to properly bind the callback method. But I try to use TYPE(DRV_MAIN_CLASS_NAME::TimerOccurred) kern_return_t TimerOccurred() LOCALONLY; TYPE(TimerOccurred) kern_return_t TimerOccurred() LOCALONLY; kern_return_t TimerOccurred() TYPE(DRV_MAIN_CLASS_NAME::TimerOccurred) LOCALONLY; All results in Out-of-line definition of 'TimerOccurred' does not match any declaration in 'DRV_MAIN_CLASS_NAME' Questions: What is the correct way to declare a timer callback method using TYPE? How to get the values targetmsgid & msgid generated by Xcode? Any help would be greatly appreciated! Best Regards, Charles

Hi, trying to upgrade from macOS Sequoia 15.3.2 to 15.4 gives this error. Now I can not boot from internal drive of M1 Air 2020, because it restores 15.4, that does not boot. I can only boot from external USB SSD that has macOS 15.3.2. How I can install back 15.3.2 or alternatively newer macOS to internal drive? I only have one Mac, this M1 Air 2020. I have AppleAppleCare+ to 9/18/25. Remaining of error is attached here: Can't ignore lock validation @t8020dart.c:535 panic(cpu 2 caller 0x0): t8020dart 0xfffffdf053908000 (dart-dispext0): Can't ignore lock validation @t8020dart.c:535 Debugger message: panic Memory ID: 0x6 OS release type: Not set yet OS version: Not set yet Kernel version: Darwin Kernel Version 24.4.0: Wed Mar 19 21:12:54 PDT 2025; root:xnu-11417.101.15~1/RELEASE_ARM64_T8103 Fileset Kernelcache UUID: 2BBA525B95E0E6B962ECC44FC093AB57 Kernel UUID: 4E6CBD31-CD1E-3939-8A63-211A206AFA66 Boot session UUID: 3A34167D-2534-402F-9679-2CAD45F67CDA iBoot version: iBoot-11881.101.1 iBoot Stage 2 version: iBoot-11881.101.1 secure boot?: YES

I have a custom USB Audio Class 2 (UAC2) compatible device. When I connect this custom device to a MacBook with a configuration of up to 10 channels (16-bit), everything seems to work fine. However, when I increase the channel count to 12, the MacBook does not recognize the 12 channels. It only shows the channel count as 0. TN2274 is the only source where I found some information about Apple's Audio Class Drivers, but it doesn't mention any limitations regarding channel counts. Could you let me know the current limitations of the Audio Class Drivers on the latest macOS versions? What configuration should I use to get 12 channels working? P.S. I also found that a 12-channel, 8-bit configuration is detected by the MacBook, bit I want it to work with 16bits. For more detail please check FB17098863

Hi Apple, We are working on a general USB device management solution on macOS for enterprise security. Our goal is to enforce policy-based restrictions on USB devices, such as: For USB storage devices: block mount, read, or write access. For other peripherals (e.g., USB headsets or microphones, raspberry pi, etc): block usage entirely. We know in past, kernel extension would be the way to go, but as kext has been deprecated. And DriverKit is the new advertised framework. At first, DriverKit looked like the right direction. However, after reviewing the documentation more closely, we noticed that using DriverKit for USB requires specific entitlements: DriverKit USB Transport – VendorID DriverKit USB Transport – VendorID and ProductID This raises a challenge: if our solution is meant to cover all types of USB devices, we would theoretically need entitlements for every VendorID/ProductID in existence. My questions are: Is DriverKit actually the right framework for this kind of general-purpose USB device control? If not, what framework or mechanism should we be looking at for enforcing these kinds of policies? We also developed an Endpoint Security product, but so far we haven’t found a relevant Endpoint Security event type that would allow us to achieve this. Any guidance on the correct technical approach would be much appreciated. Thanks in advance for your help.

Hello forum, I'm trying to build communications between a non-MFi HID device (say, a keyboard with a USB-C port) and an iOS device over a MFi-licensed cable with Swift, what framework would you suggest? The USB-C cable is MFi-licensed. The keyboard is not MFi-licensed.

Investigating a kernel panic, I discovered that Apple Silicon Panic traces are not working with how I know to symbolicate the panic information. I have not found proper documentation that corrects this situation. Attached file is an indentity-removed panic, received from causing an intentional panic (dereferencing nullptr), so that I know what functions to expect in the call stack. This is cut-and-pasted from the "Report To Apple" dialog that appears after the reboot: panic_1_4_21_b.txt To start, I download and install the matching KDK (in this case KDK_14.6.1_23G93.kdk), identified from this line: OS version: 23G93 Kernel version: Darwin Kernel Version 23.6.0: Mon Jul 29 21:14:04 PDT 2024; root:xnu-10063.141.2~1/RELEASE_ARM64_T8122 Then start lldb from Terminal, using this command: bash_prompt % lldb -arch arm64e /Library/Developer/KDKs/KDK_14.6.1_23G93.kdk/System/Library/Kernels/kernel.release.t8122 Next I load the remaining scripts per the instructions from lldb: (lldb) settings set target.load-script-from-symbol-file true I need to know what address to load my kext symbols to, which I read from this line of the panic log, after the @ symbol: com.company.product(1.4.21d119)[92BABD94-80A4-3F6D-857A-3240E4DA8009]@0xfffffe001203bfd0->0xfffffe00120533ab I am using a debug build of my kext, so the DWARF symbols are part of the binary. I use this line to load the symbols into the lldb session: (lldb) addkext -F /Library/Extensions/KextName.kext/Contents/MacOS/KextName 0xfffffe001203bfd0 And now I should be able to use lldb image lookup to identify pointers on the stack that land within my kext. For example, the current PC at the moment of the crash lands within the kext (expected, because it was intentional): (lldb) image lookup -a 0xfffffe001203fe10 Which gives the following incorrect result: Address: KextName[0x0000000000003e40] (KextName.__TEXT.__cstring + 14456) Summary: "ffer has %d retains\n" That's not even a program instruction - that's within a cstring. No, that cstring isn't involved in anything pertaining to the intentional panic I am expecting to see. Can someone please explain what I'm doing wrong and provide instructions that will give symbol information from a panic trace on an Apple Silicon Mac? Disclaimers: Yes I know IOPCIFamily is deprecated, I am in process of transitioning to DriverKit Dext from IOKit kext. Until then I must maintain the kext. Terminal command "atos" provides similar incorrect results, and seems to not work with debug-built-binaries (only dSYM files) Yes this is an intentional panic so that I can verify the symbolicate process before I move on to investigating an unexpected panic I have set nvram boot-args to include keepsyms=1 I have tried (lldb) command script import lldb.macosx but get a result of error: no images in crash log (after the nvram settings)

I have two different USB devices with different vendor IDs I would like to connect to. I submitted two separate requests for the com.apple.developer.driverkit.transport.usb entitlement for each vendor ID. However I am noticing the provisioning profile only has one of the vendor IDs. How do I submit a request for the USB Transport entitlement to support more than one vendor ID? I'm new to writing a DriverKit driver, so is this even possible?

Trying to use IOLog to print out a message from a dext. When I try to use IOLog, I get , though I did not or thought I did not tag it as private. I have tried to update the info.plist file for the dext according to https://developer.apple.com/forums/thread/705810, but that has not helped, or perhaps I am not defining it correctly since it's a dext. Anyone else had this issue, and how did you fix it?

I have an app that captures USB storage device and sends some commands to it. The app has a privilege helper tool which captures the USB device. Everything was working fine upto macOS 15.2 but it 15.3 update broke the functionality. When the helper tool tries to capture the USB device, it is able to capture IOUSBHostDevice but fails to capture IOUSBHostInterface. The error is Code: 3758097097; Domain: IOUSBHostErrorDomain; Description: Failed to create IOUSBHostInterface.; Reason: Failed [super init] I have verified the UID, EUID, GID, EGID = 0 for the helper process. So by IOUSBHost documentation it should have worked. The code that cause the error inside the helper tool is func captureUSBInterface(interface: io_service_t) -> IOUSBHostInterface? { let queue = DispatchQueue(label: "com.example.usbdevice.queue2") var capturedInterface: IOUSBHostInterface? do { capturedInterface = try IOUSBHostInterface(__ioService: interface, options: .deviceCapture, queue: queue, interestHandler: nil) } catch { NSLog("Failed to capture USB interface: \(error)") return nil } return capturedInterface } The app has sandbox=False and is distributed outside of the App Store. Please advise (long-term, short-term solutions) on how to make this work.