Hi everyone, I’m developing an app called FindMyNet that allows users to find the best internet provider based on their postal code (CAP). The app is built with Xcode and the macOS simulator. I’ve set up a FastAPI backend that communicates with an Excel database containing internet provider data for each postal code. Unfortunately, when I try to run the app, I encounter an error that prevents me from retrieving data from the database and displaying the correct provider. Task <6B5C86B6-181A-4235-AE68-23AAF6645683>.<1> finished with error [1] Error Domain=NSPOSIXErrorDomain Code=1 "Operation not permitted" UserInfo={_NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask <6B5C86B6-181A-4235-AE68-23AAF6645683>.<1>, _kCFStreamErrorDomainKey=1, _kCFStreamErrorCodeKey=1, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask <6B5C86B6-181A-4235-AE68-23AAF6645683>.<1>" ), _NSURLErrorNWPathKey=satisfied (Path is satisfied), interface: en0[802.11], ipv4, dns, uses wifi} Problem description: • The FastAPI backend is running on a Raspberry Pi and communicates with the app via an HTTP request. • When I enter a postal code, the app should return the best provider for that region, but I only get a 500 error. • I’ve verified that the FastAPI server is running, but it seems there’s an issue with communication between the app and the server. Steps taken so far: • I’ve checked the logs on the FastAPI server, but there are no obvious errors. • I’ve manually tested the API using Postman, and it works fine, so the issue seems to be app-side. Support request: I’d like to understand better what could be causing this error and if anyone has had similar experiences. Any advice on diagnosing the problem or solutions for resolving it would be greatly appreciated. Thanks in advance for your help!

I'm using NETransparentProxyProvider to intercept udp sockets using the method handleNewUDPFlow. An application may create a UDP socket and set the DONTFRAG using setsockopt method setsockopt(s, IPPROTO_IP, IP_DONTFRAG, &val, sizeof(val)) In this case, do I have option in this case, to get the connection settings inside the callback (void)handleNewUDPFlow:(NEAppProxyUDPFlow *)flow initialRemoteEndpoint:(NWEndpoint *)remoteEndpoint; So in this case, I would be able to create the outgoing socket with the exact same characteristics, after the original app socket got intercepted by my proxy provider ?

I am developing an Xcode app with a job feed, with profile view, with chat eg. I fetch using federatet queries to my microservices thru Apollo Router. Infront of the Apollo Router i Have a Kong that adds a X user ID, that the microservices use for personalized feed and other user info. The info is stored with SwiftData. My thought is that i should add a better way of controlling when i need to fetch. I have a “lastupdateAPI” with different entities (profile, profile picture eg). So when nothing has changed we do not fetch. But rather then using a own API for this, isnt ETag better? Or is it any other recommendations with Xcode Swiftui. Good strategies for not fetching what i already have?

My application advertises service uuid FC66 and 00410b66-2553-48d7-cf18-000000002154 in advertising data, and "loading" as local name in response data in foreground. But iOS cut local name to "loadi" and add Hashed UUID data 0100000000000000000000000600000000 to response data. Why iOS add hashed uuid data? Is it because my 128-bit uuid format is wrong? We want to advertise the complete local name data. How to avoid this problem?

I'm using the NEHotspotConfigurationManager class, with joinOnce = false, to connect to a Wi-Fi network that lacks internet access (IoT device). After restarting my iPhone, the first connection to this network disconnects automatically in less than a minute. All subsequent connections remain stable without disconnecting. What could be causing this?

way to display it is by holding the Option key and clicking the Wi-Fi icon. In macOS 14.0, wdutil was still usable, but in 14.6.1, the returned information is now . I am unsure if there is an official way to obtain the corresponding BSSID. I need to process the BSSID in my code, so either a command-line tool or an API would work.

When installing a new version the app while a tunnel is connected, seemingly the old packet tunnel process gets stopped but the new one does not come back up. Reportedly, a path monitor is reporting that the device has no connectivity. Is this the expected behavior? When installing an update from TestFlight or the App store, the packet tunnel instance from the old tunnel is stopped, but, due to the profile being on-demand and incldueAllNetworks, the path monitoring believes the device has no connectivity - so the new app is never downloaded. Is this the expected behavior? During development, the old packet tunnel gets stopped, the new app is installed, but the new packet tunnel is never started. To start it, the user has to toggle the VPN twice from the Settings app. The tunnel could be started from the VPN app too, if we chose to not take the path monitor into account, but then the user still needs to attempt to start the tunnel twice - it only works on the second try. As far as we can tell, the first time around, the packet tunnel never gets started, the app receives an update about NEVPNStatus being set to disconnecting yet NEVPNConnection does not throw. The behavior I was naively expecting was that the packet tunnel process would be stopped only when the new app is fully downloaded and when the update is installed, Are we doing something horribly wrong here?

I've implemented a VPN app with Packet Tunnel Provider for MacOS and iOS.I have two questions regarding the Extension's sleep/wake functions:1. If the VPN configuration is set with disconnectOnSleep = false, and at the extension I'm sending keep-alives every X seconds, What would happen when the device enters sleep mode? Will it keep sending keep-alive (because the VPN is configured with disconnectOnSleep=false) ?2. If the VPN configuration is set with disconnectOnSleep = true, and also isOnDemandEnabled = true. When the device enters sleep mode, do I need to disconnect the VPN myself? Or the OS would take care of it? And if I should disconnect it myself, the on-demand won't try to turn it on again (because the on-demand) ?

Hello, I have been testing my app in iOS 18 device and while creating a server with TCP, then apple make a request for local network permission automatically. If we don't allow the permission, the connection not working. We are getting the connection timeout error even after allowing again from device setting. Has something changed in the flow for iOS 18 version? Can someone help me to solve this issue?

Hello, I'm developing a Transparent Proxy and I noticed that the Network Extension Framework logs in the Unified Logging System when my profile receives a flow, its source application, its destination endpoint, and my profile's decision regarding that flow. I worry that this may compromise the user's privacy. So is there a way that I can turn off these logs at least in Distribution Configurations?

Hey, our app is host for system extension and since macOS 15.3 there is an error when user tries delete an app pop with missing permission appears Is it intentional? Is it a bug? if not how in correct way should we handle removing of SE when app is being to removed?

We have an application which is written in Swift, which activates network extension (Transparent Proxy). We want to use MDM deployment for this network system extension. Our Transparent Proxy module is a system extension, which is exposing an app proxy provider interface (We are using NETransparentProxyProvider class and in extension’s Info.plist we use com.apple.networkextension.app-proxy key.) We don’t have any remote server setup to forward the traffic, instead we open a connection with a certain localhost:port to redirect the traffic which is received in our transparent proxy. We have another module that listens to the particular localhost:port to process the traffic further. As per https://developer.apple.com/documentation/devicemanagement/vpn/transparentproxy documentation, we noticed that we can use the VPN payload with app-proxy as Provider Type for Transparent Proxy. We were able to install the profile created via Jamf Pro and also while in stalling our product the Transparent Proxy gets mapped with the one which is installed via profile. However after that the network is broken and hence unable to browse anything. We are suspecting the remote server filed is causing this. So we tried creating the custom profile without remote server address for VPN payload, but we are unable to install the profile. It throws below error: 2025-02-11 16:43:55.193348+0530 0x2f880 Error 0x0 6815 0 mdmclient: (NetworkExtension) [com.apple.networkextension:] Failed to save configuration DGWebProxy because it is invalid: Error Domain=NEConfigurationErrorDomain Code=2 "configuration is invalid: Missing server address" UserInfo={NSLocalizedDescription=configuration is invalid: Missing server address}
2025-02-11 16:43:55.193376+0530 0x2f880 Error 0x0 6815 0 mdmclient: (NetworkExtension) [com.apple.networkextension:] NEProfileIngestion Error occurred when saving configuration 'DGWebProxy': configuration is invalid: configuration is invalid: Missing server address 
2025-02-11 16:43:55.196159+0530 0x2f880 Error 0x0 6815 7 mdmclient: [com.apple.ManagedClient:CPDomainPlugIn] [ERROR] [0:MDMDaemon:CPDomainPlugIn:<0x2f880>] <<<<< PlugIn: InstallPayload [NEProfileIngestionPlugin] Error: Error Domain=ConfigProfilePluginDomain Code=-319 "The ‘VPN Service’ payload could not be installed. The VPN service could not be created." UserInfo={NSLocalizedDescription=The ‘VPN Service’ payload could not be installed. The VPN service could not be created.} <<<<<
2025-02-11 16:43:55.196826+0530 0x2f880 Error 0x0 6815 7 mdmclient: [com.apple.ManagedClient:MDMDaemon] [ERROR] [0:MDMDaemon:<0x2f880>] [CE] PlugIn_InstallPayload ==> Error Domain=ConfigProfilePluginDomain Code=-319 "The ‘VPN Service’ payload could not be installed. The VPN service could not be created." UserInfo={NSLocalizedDescription=The ‘VPN Service’ payload could not be installed. The VPN service could not be created.} Can we create MDM profile for Transparent Proxy without remote server address?

We have an application which is written in Swift, which activates two network extensions (Content Filter, Transparent Proxy). We want to use MDM deployment for these network system extensions. For Content Filter, we already have Jamf Profile which has Web Content Filter payload and it works fine. Our Transparent Proxy module is a system extension, which is exposing an app proxy provider interface (We are using NETransparentProxyProvider class and in extension’s Info.plist we use com.apple.networkextension.app-proxy key.) We don’t have any remote server setup to forward the traffic, instead we open a connection with a certain localhost:port to redirect the traffic which is received in our transparent proxy. We have another module that listens to the particular localhost:port to process the traffic further. We are unable to find the appropriate payload in any of the Profile Editor applications like Apple Configurator, iMazing Profile Editor and Jamf Pro that correctly describes our setup. As per https://developer.apple.com/documentation/devicemanagement/vpn/transparentproxy documentation, we noticed that we can use the VPN payload with app-proxy as Provider Type for Transparent Proxy. Here are the list of issues encountered with different MDM solutions. **AppleConfigurator: ** We were able to install the profile created via Apple Configurator. However when we install our product (which has the above mentioned system extensions), the Transparent Proxy added by our product fails to map with the installed profile. User has to provide the credentials and follow the steps while installing the extension via the product. Attached the screenshot of "Network-&gt;Filters" screen and the profile for reference. Profile Created using Apple Configurator iMazing Profile Editor: Unable to install the profile created using iMazing Profile Editor. Attached the screenshot of error and the profile for reference: Profile Created Using iMazing Profile Editor Jamf Pro: We were able to install the profile created via Jamf Pro and also while in stalling our product the Transparent Proxy gets mapped with the one which is installed via profile. However after that the network is broken and hence unable to browse anything. Attached the profile for reference. Profile Created using Jamf Pro What should be the correct profile payload to use for our Transparent Proxy?

Hi Team, OS is prompting for local network permission for our application which runs as root level daemon. As per the our analysis, it looks like it is prompting from our own library which is trying to get network info ' using /usr/sbin/system_profiler with "-xml -detailLevel basic SPNetworkDataType" and then trying to iterate to find DNS.ServerAddresses for each item. Then using [NSHost hostWithAddress:IPAddress];(When this library is not linked to the app then there is no prompt, so most likely this is the code that is resulting in the prompt). Is this expected ? . Is there any other way that we can get DNS host name without being prompted for local network permission on mac OS 15

We are migrating our iOS app to macOS. On iOS, it works fine. But when I try and run on macOS and connect to the VPN, I am getting an error like failed to fetch /Users/stuart/Library/Developer/Xcode/DerivedData/app-byzvshkqegwzqxgervfswmsughkm/Build/Products/Debug/<app_name>.app/Contents/PlugIns/<network_extension_name>.appex/Contents/_CodeSignature/CodeRequirements-1 error=-10. If I have Settings -> VPN open, it rapidly is connecting and disconnecting. Is there anything I need to do specific to macOS to make this work? Or is this related to a broken code signature? Thanks in advance!

I am adopting Swift Concurrency in my network extension app to use Swift 6 protections. In the UI app I ended up with most of the app marked as MainActor, so that pieces of my app can keep seamless access to each other and at the same time have thread safe access. When it comes to my network extension, does it make sense to also mark most of the code as MainActor for the purposes of thread safety and seamless access of most classes to each other? I have doubts, because MainActor sounds like it should be a UI think, but network extension has no UI Of course any long or blocking operations would not be MainActor

I'm working on a game that uses NWBrowser and NWListener to create a connection between an iOS and tvOS app. I've got the initial networking up and running and it works perfectly when running in the simulator(s). However, when I run on-device(s), I've found that browseResultsChangedHandler gets called multiple times for what is ostensibly the same service. My browser handler (which runs on iOS) looks like this: browser.browseResultsChangedHandler = { [weak self] results, changes in if let result = browser.browseResults.first { self?.onPeerConnected?(PeerConnection(endpoint: result.endpoint)) } } The first time it gets called, the interface in the NWBrowser.Result is en0, but the 2nd time it gets called, it is en0 AND awdl0. Because my current handling is so naive, this re-invocation ends up with two connections being made to the remote server (the Apple TV). Now, I know that this handler, by its very name, is designed to be called multiple times as things change, so I'm curious as to what strategies I might employ here. Is there any value in tearing down any previous connections and re-connecting using the latest one? Should I just kill the browser as soon as I handle the first one? Just ignore subsequent ones? I'm sure that, to a degree, the answer is probably "it depends"... but I'm curious to see if there might be at least some high-level strategies like "whatever you do, don't do xxxx" or "most apps do yyyy" :-) Thanks.

I've implemented a custom system extension VPN for macOS using Packet Tunnel Provider. The VPN is configured with on-demand, and a rule to always connect whenever there's traffic: onDemandRules = [NEOnDemandRuleConnect()] As for the tunnel's settings (at the Packet Tunnel Provider), I've configured a split tunnel, so some routes are excluded from the tunnel. Now I have the following scenario: The VPN is connected The Mac enters sleep The sleep() function is called (at my Packet Tunnel Provider) The Mac briefly awakes to check emails/push notifications/etc. This traffic is excluded from the tunnel. What is the expected behavior here? Should the wake function be called because of the on-demand rule? Or should the VPN remain asleep because this traffic is excluded from the tunnel?

We are experiencing an issue where our iOS app’s network extension (acting as a VPN) is being unexpectedly terminated by the operating system. The termination appears identical to a user-initiated stop, as the extension receives the following call: NEProviderStopReasonUserInitiated. The issue occurs sporadically but can happen 10–20 times per day on devices with less than 10% free storage. On one affected device, opening the Camera app (or using the camera within another app like WhatsApp) consistently triggers the issue, making it easily reproducible. Memory consumption does not seem to be the cause—the extension is stopped while using only ~10MB of memory, well below the 50MB limit. We noticed a pattern related to swap usage: • On affected devices, the “Swap Used” column shows very low values (a few MB). • On unaffected devices, swap usage is significantly higher (hundreds of MB). • This is the only clear difference we’ve observed. The issue occurs across different device models and iOS versions (18.2.1 and 17.6.1). It also happens across different app builds (compiled with Xcode 15.x and Xcode 16.x). We found a similar report on the Apple Developer Forums: 🔗 https://developer.apple.com/forums/thread/108149 Has anyone else encountered this behavior with Network Extensions? Could low swap usage or system resource constraints be a factor? Any suggestions for debugging or potential workarounds would be greatly appreciated.

In my application, there is a Network Extension with the bundle ID com.***.agent.yyy.zzz.ne. There is a user upgraded their system to macOS Sequoia 15.3, they faced an issue where enabling this Network Extension failed. Even after uninstalling the application and the Network Extension, restarting the system, and reinstalling multiple times, the enabling process still failed. it alert: Failed to enable the Network Extension. When checking the status via "systemextension list", it always shows "activated waiting for user". This shows the normal enabling process log: This shows the log when the enabling fails upon clicking. Strangely enough, there is no activation operation log when it fails. What could be the problem?