Hello, I had a successful attempt at notarization earlier today in my build pipeline. I've been using the same system for building my macOS application for over a year now. However, subsequent builds seemed to fail. I found a couple similar topics which makes this seem not not an isolated incident: https://developer.apple.com/forums/thread/782950 https://developer.apple.com/forums/thread/783347 https://developer.apple.com/forums/thread/783283 In my case I use the following command to submit the notarization: xcrun notarytool submit FilePath.dmg --apple-id "myappleid@gmail.com" --password "redacted_obviously" --team-id "my-team-id" --wait I left a previous run go for over an hour and the "Current status: In Progress.................. etc" filled the whole terminal. I manually checked the progress of the submissions using the command below: xcrun notarytool log --apple-id "myappleid@gmail.com" --password "redacted_obviously_again" --team-id "my-team-id" [run id] And they all result in the following output: Submission log is not yet available or submissionId does not exist Is anyone else experiencing this? Are there any possible solutions?

Hey all, I’m experiencing a consistent issue with notarizing a signed .pkg file that contains a macOS screen saver (.saver) bundle. Nothing online so far except 1 thread on the form from the altool time pre-2023 so i thought it worth another update. Here is what I did: I signed the .saver bundle using my Developer ID Application certificate. I packaged it into a .pkg using pkgbuild with my Developer ID Installer certificate: I submitted the resulting .pkg via xcrun notarytool: xcrun notarytool submit saver-name.pkg --apple-id email@email.com --password [app-specific-password] --team-id xxxxxxxxx The submission appears to be accepted and uploads successfully. However, the notarization status remains stuck at “In Progress” for hours (over 12h), with no update. I also tried: Repackaging the .pkg with a new name using a zip Resubmitting it under a new submission ID All attempts are stuck in the same “In Progress” state indefinitely. Did anyone solve this yet?

Hi all, I’m trying to notarize a Flutter macOS app built in CI (GitHub Actions). The app builds and signs fine locally—codesign --verify --deep --strict and spctl --assess both pass. However, Apple’s notarization service consistently rejects the app with errors like: The binary is not signed with a valid Developer ID certificate: file_picker.framework The binary is not signed with a valid Developer ID certificate: file_saver.framework The binary is not signed with a valid Developer ID certificate: url_launcher_macos.framework What I’ve tried: Explicitly re-signing all frameworks with my Developer ID Application certificate and --timestamp Removing existing signatures before re-signing Ensuring correct entitlements and bundle identifier Matching the app bundle name and identifier in all places Using both codesign --deep and manual signing of each binary Local validation always passes, but notarization fails in CI Certificate: I am using a “Developer ID Application” certificate (not a “Mac Developer” or “Apple Development” certificate). The output of codesign -dvv for the problematic frameworks shows: Authority=Developer ID Application: [My Name/Team] ([Team ID]) So I believe I am not making the common mistake of using the wrong certificate type. CI Environment: GitHub Actions, macos-latest runner Flutter 3.27.2, stable channel All secrets (cert, Apple ID, app-specific password, team ID) are set up Questions: Has anyone encountered this with Flutter plugins or CI builds? Are there known issues with signing Flutter plugin frameworks for notarization? Is there a way to get more detailed feedback from Apple’s notarization service? Any advice or pointers would be greatly appreciated. I’m happy to provide logs, scripts, or a minimal project if needed. Thanks!

Product: macOS, Notarization Tool: notarytool, Stapler Tool: xcrun stapler, Application: master-billing.app, DMG: master-billing.dmg I'm attempting to notarize and staple a macOS .dmg file containing a signed .app. Notarization completes successfully, but the stapling step fails with Error 65. All tools are up-to-date and I'm following the official Apple process. #!/bin/bash set -e APP="dist/mac-arm64/master-billing.app" DMG="dist/mac-arm64/master-billing.dmg" IDENTITY="Developer ID Application: NAME (TEAM ID)" PROFILE="notarysiva" VOLUME_NAME="MasterBilling" Sign binaries and frameworks find "$APP" -type f ( -name ".dylib" -or -name ".so" -or -name "*.node" -or -perm -u+x ) -exec codesign --force --options runtime --timestamp --sign "$IDENTITY" {} ; find "$APP" -type d ( -name ".app" -or -name ".framework" ) -exec codesign --force --options runtime --timestamp --sign "$IDENTITY" {} ; codesign --deep --force --options runtime --timestamp --sign "$IDENTITY" "$APP" Create DMG hdiutil create -volname "$VOLUME_NAME" -srcfolder "$APP" -ov -format UDZO "$DMG" Sign DMG codesign --sign "$IDENTITY" --timestamp "$DMG" Verify DMG signature codesign --verify --verbose=2 "$DMG" Submit for notarization xcrun notarytool submit "$DMG" --keychain-profile "$PROFILE" --wait Staple ticket xcrun stapler staple -v "$DMG" Signing all binaries, dylibs, and frameworks... . . ✅ App signing complete. 💽 Creating DMG... ...................................................................................... created: /Users/one/Documents/MASTER/bill-master/dist/mac-arm64/master-billing.dmg 🔏 Signing the DMG... ✅ Verifying DMG signature... dist/mac-arm64/master-billing.dmg: valid on disk dist/mac-arm64/master-billing.dmg: satisfies its Designated Requirement 📤 Submitting DMG for notarization... Conducting pre-submission checks for master-billing.dmg and initiating connection to the Apple notary service... Submission ID received id: 32927c3c-7459-42b4-a90c Upload progress: 100.00% (123 MB of 123 MB) Successfully uploaded file id: 32927c3c-7459-42b4-a90c path: /Users/one/Documents/MASTER/bill-master/dist/mac-arm64/master-billing.dmg Waiting for processing to complete. Current status: Accepted............ Processing complete id: 32927c3c-7459-42b4-a90c status: Accepted 📌 Stapling notarization ticket to DMG... Processing: /Users/one/Documents/MASTER/bill-master/dist/mac-arm64/master-billing.dmg . . . Downloaded ticket has been stored at file:///var/folders/1l/ht34h5y11mv3rhv8dlxy_g4c0000gp/T/5bb9e667-dfe1-4390-8354-56ced7f48fa0.ticket. Could not validate ticket for /Users/one/Documents/MASTER/bill-master/dist/mac-arm64/master-billing.dmg The staple and validate action failed! Error 65.

Hello everyone, I’m trying to notarize my macOS app (DockIt.zip) using the new notarytool CLI, but every submission remains in In Progress status forever, it never moves to Accepted or Rejected. I’ve tried multiple rebuilds, credential resets, and even the Xcode GUI method, but the result is the same. Environment • macOS 14.x • Xcode 15.x / Command-Line Tools 15.x • Apple ID: afonsocruz.dev@icloud.com (Team ID: 264Z9XKCT6) • Keychain profile: DockItCreds Steps taken 1. zip -r DockIt.zip DockIt.app 2. xcrun notarytool store-credentials DockItCreds --apple-id ... --team-id 264Z9XKCT6 3. xcrun notarytool submit DockIt.zip --keychain-profile DockItCreds --wait 4. xcrun notarytool history --keychain-profile DockItCreds History snapshot 167a9600-5c7c-4bc4-b984-dd967d30e161 (2025-05-19T11:37:59Z) – In Progress 7167f7c8-d448-4b35-9817-055009f2730a (2025-05-19T04:59:34Z) – In Progress 6ef0610a-595f-4c57-b0f2-f5fe783e8679 (2025-05-18T22:04:10Z) – In Progress bddde388-a34a-42c4-afb8-f06f2b0fe8fa (2025-05-17T10:24:07Z) – In Progress Questions Is it normal to stay “In Progress” for so long? Any recent service changes or outages? How can I get more detailed logs? Also, I'm still learning about macOS development and these steps! If there's something obvious and I was not able to see, please, take into consideration! Thanks!

Dear Apple Support, for better understanding to use the Notary Service, I would like to ask when and what have to be notarized. I am absolutely aware of using the Notary Service and which packages can be submitted and how to get the status. Scenario: We have one library which is developed by a specific team and other teams develop and deliver to customer MacOS apps which packages this library for the shipment. So, the library will be produced internally and will be shipped in different products. The library will be code signed before we make available internally. When should we notarize (and staple) this library? Directly after the code is signed or when it will be packaged in each product when it will be delivered to customer? Best regards, Stefan

Hi, overnight I'm getting "HTTP status code: 403. Invalid or inaccessible developer team ID for the provided Apple ID. Ensure the Team ID is correct and that you are a member of that team." in my pipeline running notarytool store-credentials. I'm getting --apple-id, --team-id and --password from CI variables. Double checked the values (even though they shouldn't change). Tried a new app specific password I did not change anything to cause this and my apple developer account is active. Really scratching my head what's going on here. Some assistance would be greatly appreciated!

Once I have built my macOS .app and signed it I run notarytool using this simple shell script: #!/bin/sh ditto -c -k --keepParent "$1.app" "$1.zip" xcrun notarytool submit "$1.zip" --keychain-profile "Notary Profile for DeepSkyStacker" --wait xcrun stapler staple $1.app rm -f $1.zip How can I export that "keychain-profile" (notary profile) so I can use it in CI/CD actions? Clearly I don't wish to expose the full invocation of xcrun notarytool store-credentials.

I have attempted all upgrades: updated xcode to 16.4 downloaded and installed Command Line Tools for Xcode 16.4 I have no issues with the installs, however when I run: > xcrun notarytool --version 1.0.0 (38) I need to be running v2.x How can I resolve this issue.

Hello, We are currently facing an issue with the Apple Notary Service that is completely blocking our production pipeline. For the past three days, every single submission has been stuck in the "In Progress" state indefinitely. Some submissions have been pending for over 48 hours, and none of them ever proceed to analysis. When checking the status via xcrun notarytool history, all entries show "In Progress". Attempting to retrieve logs with xcrun notarytool log always returns: Submission log is not yet available. This strongly suggests that the processing hasn't even started. This issue occurs consistently from my local machine (MacBook Air M3) and Our GitHub Actions CI workflow. Both environments are properly configured with Electron + Electron-Builder, and the app is correctly signed and uploaded each time. We have verified multiple times all credentials and code signing settings, no exceptions so far or problems in the pipeline. Here are a few stuck submission IDs: This is not a normal delay, it looks like a backend issue affecting our account or this specific App ID. Please escalate this case as soon as possible. We appreciate your urgent attention. Best

Command failed: codesign --sign 142DA07B8371F5C9BCE0FFEC6B23CDEB84F48E52 --force --timestamp --options runtime --entitlements /Users/mymac/Desktop/ElectronApp/node_modules/app-builder-lib/node_modules/@electron/osx-sign/entitlements/default.darwin.plist /Users/mymac/Desktop/ElectronApp/dist/mas-arm64/electron.app/Contents/Library/LoginItems/electron Login Helper.app/Contents/MacOS/electron Login Helper /Users/mymac/Desktop/ElectronApp/dist/mas-arm64/electron.app/Contents/Library/LoginItems/electron Login Helper.app/Contents/MacOS/electron Login Helper: replacing existing signature /Users/mymac/Desktop/ElectronApp/dist/mas-arm64/electron.app/Contents/Library/LoginItems/electron Login Helper.app/Contents/MacOS/electron Login Helper: resource fork, Finder information, or similar detritus not allowed failedTask=build stackTrace=Error: Command failed: codesign --sign 142DA07B8371F5C9BCE0FFEC6B23CDEB84F48E52 --force --timestamp --options runtime --entitlements /Users/mymac/Desktop/ElectronApp/node_modules/app-builder-lib/node_modules/@electron/osx-sign/entitlements/default.darwin.plist /Users/mymac/Desktop/ElectronApp/dist/mas-arm64/electron.app/ I'm not entirely sure what's causing this issue. Has anyone else encountered this error while signing their macOS app? I’d really appreciate any guidance or solutions you can share.

I have multiple submissions for an app notarization. The goal is to distribute the DMG on my website rather than the app store (which I also have a submission in review for). These are the notarization logs: -------------------------------------------------- createdDate: 2025-06-23T20:26:46.597Z id: 75972c58-bc83-44a9-b3af-4aff1b1839c3 name: Mira-Assist-Fresh.dmg status: In Progress -------------------------------------------------- createdDate: 2025-06-23T17:53:11.825Z id: 4bccdfb6-6663-41d3-89bc-c0a15fbdd4b8 name: Mira Assist.zip status: In Progress -------------------------------------------------- createdDate: 2025-06-23T17:45:10.342Z id: fedca538-7619-4a7f-bcc8-3199d6e4b1a6 name: Mira-Assist-1.0.0-Hardened.dmg status: In Progress -------------------------------------------------- createdDate: 2025-06-23T02:51:04.289Z id: 19a866b9-e664-4641-b137-6ac852c14ac9 name: Mira Assist-1.0.0.dmg status: In Progress -------------------------------------------------- createdDate: 2025-06-23T02:44:25.372Z id: 455209e5-91dd-4324-aac0-d582f88efc95 name: Mira Assist-1.0.0.dmg status: In Progress The earliest of which occured more than 18 hours ago. This is my first time submitting an app for notarization. I also have a developer account that was created ~1-2 days ago. From what I've read online, notarization usually occurs in less than 10 minutes. When querying for the logs, it juts says that the submission ID is invalid or the logs aren't available yet. Submission log is not yet available or submissionId does not exist id: 75972c58-bc83-44a9-b3af-4aff1b1839c3

I've been successfully notarizing my apps for a year or so now, with intermittent releases every so often, usually succeeding with notarization in a couple of minutes. These apps are all written in Python, but I worked through all the jank required to get them to notarize cleanly a while ago and have no issues since. Today I submitted a couple of builds which have been stuck for hours. They're just "in progress", so no logs I can look at, no emails or anything on my developer account page. How can I begin to debug this? Successfully received submission info createdDate: 2025-06-24T18:43:37.140Z id: 8d1a1ca9-f0ad-426f-a714-89aaf9e01a07 name: pinpal-2025.6.25.for-notarizing.app.zip status: In Progress I should note that in addition to the comment added within 10 minutes of creation of this issue, within the last day, we also have: https://developer.apple.com/forums/thread/789389 https://developer.apple.com/forums/thread/789599 https://developer.apple.com/forums/thread/789995 So it seems pretty likely something is going on on the backend.

Starting a few hours ago (roughly 2:45PM Eastern time) we began experiencing elevated latency with the Developer ID Notary Service. There is nothing listed on the developer system status page about degraded performance or a service outage. Operations that usually take ~15 minutes, are stacking up for hours. The oldest pending entry we have was created at 2:45PM Eastern: createdDate: 2025-06-24T18:45:22.539Z id: 5209a4d2-eae4-4714-aa8e-6961677ff2e We currently have 27 pending builds in the notary service since we are required to notarize internal builds to ensure we satisfy our requirements so this is creating an issue for us.

Yesterday there were reported outages on the Developer ID Notary Service, but it was reported pretty late and we were able to notice the outages in real time. It says resolved now, however an error still persists: Error: HTTP status code: 403. A required agreement is missing or has expired. This request requires an in-effect agreement that has not been signed or has expired. Ensure your team has signed the necessary legal agreements and that they are not expired. Is there an ongoing outage at this moment that is not being reported again? Our pipelines have been working flawlessly for months without intervention nor changes until the most recent outages

It's been over 24h and it's still in progress. Is there a timeout for a failed notarization? or do we just wait for days.. weeks.. moths? Successfully received submission info createdDate: 2025-06-25T09:52:03.153Z id: 2ae713a5-c2e3-432f-84ee-e5d3d4aed621 name: slideshow-city-1.1.0-arm64.dmg status: In Progress

I'm building a custom macOS installer for my software, primarily using the builtin tools of codesign, pkgbuild, productbuild and xcrun. My product consist of a list of plugins and a CEP extension for the Adobe After Effect app. All of my bundles and binaries are properly signed using a trusted Apple Developer certificate I've generated, of type Developer ID Application. My installer is a "distribution" pkg, and has this structure(expanding it using pkgutil --expand): SceneTools-3.4.4-osx-installer ├── Distribution ├── miscellaneous.pkg ├── plugins.aftereffects2022.pkg ├── plugins.aftereffects2023.pkg ├── plugins.aftereffects2024.pkg ├── plugins.aftereffects2025.pkg ├── preinstall.pkg ├── Resources ├── scenebuilder.pkg └── uninstaller.pkg Each "child" pkg would install parts of my product in different locations in the target macOS disk(this is why I'm using that kind of style of building the custom installer). Signing each and every bundle or binary of my product, signing the "child" pkg's, then notarizing them works well with no issues, in addition signing the "final" "distribution" using productbuild --sign option also works well, but when trying to notarize the "final" pkg, the notary service fails with this error: { "logFormatVersion": 1, "jobId": "5fb38df9-ef97-4bd3-955e-7783c37ac4a8", "status": "Invalid", "statusSummary": "Archive contains critical validation errors", "statusCode": 4000, "archiveFilename": "SceneTools-3.4.4-osx-installer.pkg", "uploadDate": "2025-06-26T14:14:41.507Z", "sha256": "621de5d887b06ad11214255c6e91ebd9eeffb18ad8f940365f4539bd1902fe9a", "ticketContents": null, "issues": [ { "severity": "error", "code": null, "path": "SceneTools-3.4.4-osx-installer.pkg", "message": "Package SceneTools-3.4.4-osx-installer.pkg has no signed executables or bundles. No tickets can be generated.", "docUrl": null, "architecture": null }, { "severity": "warning", "code": null, "path": "SceneTools-3.4.4-osx-installer.pkg", "message": "The contents of the package at SceneTools-3.4.4-osx-installer.pkg could not be extracted.", "docUrl": null, "architecture": null } ] } My final pkg indeed doesn't contain any bundles or binaries directly, but that's how it should be - a container of "child" pkg. I tried various ways of working-around this issue, like: Notarizing the dmg that contains this final pkg - worked, but when opening the pkg, GateKeeper blocks the users from opening it. Wrapping the pkg inside an .app and notarizing the .app - same as above. What am I doing wrong? Does those kind of pkg like my "final" pkg aren't meant to be notarized? if so - how can I solve this GateKeeper blocks? Should I build my final pkg in a different way?

Dear Apple Developer Technical Support, I am encountering an issue with notarizing and stapling both PKG and DMG installers for our Electron-based macOS application COSGrid. Despite receiving successful notarization submission responses via notarytool, the stapling process fails with Error 65. Environment: App Name: COSGrid Bundle Identifier: com.cosgrid.pkg.COSGrid Developer ID Team ID: YB8S2XZ98K macOS Version: macOS [15.1] Xcode Version: [16.0 (16A242d)] Workflow Summary: For PKG: Build via yarn build (Vite + Electron Builder) Package with pkgbuild Sign using productsign Submit for notarization: xcrun notarytool submit COSGridMZA-2.1.10-arm64.pkg --apple-id "..." --team-id YB8S2XZ98K --password "..." --wait Conducting pre-submission checks for COSGridMZA-2.1.10-arm64.pkg and initiating connection to the Apple notary service... Submission ID received id: a8ff8e09-1ab4-49ed-9f6b-4afb9f09e53a Upload progress: 100.00% (235 MB of 235 MB) Successfully uploaded file id: a8ff8e09-1ab4-49ed-9f6b-4afb9f09e53a path: /Users/murugavel/Documents/MZA/mza/release/2.1.10/COSGridMZA-2.1.10-arm64.pkg Waiting for processing to complete. Current status: Accepted..................... Processing complete id: a8ff8e09-1ab4-49ed-9f6b-4afb9f09e53a status: Accepted Receive notarization success Stapling fails: xcrun stapler staple COSGridMZA-2.1.10-arm64.pkg Could not validate ticket... The staple and validate action failed! Error 65. For DMG: Sign via codesign Submit to notarization — success Attempt to staple: xcrun stapler staple -v COSGrid-2.1.10-arm64.dmg Could not validate ticket... The staple and validate action failed! Error 65. Additional Verification: I verified the DMG’s code signature integrity: Command: codesign --verify --verbose=4 COSGrid-2.1.10-arm64.dmg Output: COSGrid-2.1.10-arm64.dmg: valid on disk COSGrid-2.1.10-arm64.dmg: satisfies its Designated Requirement Command: codesign -dvv COSGrid-2.1.10-arm64.dmg Output: Executable=/Users/murugavel/Documents/MZA/mza/release/2.1.10/COSGrid-2.1.10-arm64.dmg Identifier=COSGrid-2.1.10-arm64 Format=disk image CodeDirectory v=20200 size=308 flags=0x0(none) hashes=1+6 location=embedded Signature size=9013 Authority=Developer ID Application: COSGrid Systems Private Limited (YB8S2XZ98K) Authority=Developer ID Certification Authority Authority=Apple Root CA Timestamp=1 Jul 2025 at 11:34:05 AM Info.plist=not bound TeamIdentifier=YB8S2XZ98K Sealed Resources=none Internal requirements count=1 size=180 **Verified Signature for .pkg ** pkgutil --check-signature COSGridMZA-2.1.10-arm64.pkg Package "COSGridMZA-2.1.10-arm64.pkg": Status: signed by a developer certificate issued by Apple for distribution Signed with a trusted timestamp on: 2025-06-30 13:57:19 +0000 Certificate Chain: 1. Developer ID Installer: COSGrid Systems Private Limited (teamID) Expires: 2027-02-01 22:12:15 +0000 2. Developer ID Certification Authority Expires: 2027-02-01 22:12:15 +0000 3. Apple Root CA Expires: 2035-02-09 21:40:36 +0000 Diagnostic Logs Attached: Stapler verbose logs for both PKG and DMG codesign verification output for both PKG and DMG Notarytool submission logs Ticket JSON response from Apple API API request/response headers Effective electron-builder.yaml config Key Observations: codesign verification passes successfully for both artifacts Notarization submission reports success via notarytool Stapler fails with Error 65 for both PKG and DMG Ticket JSON fetched from CloudKit API appears valid No provisioning profile used (Developer ID distribution only) Request: Could you please help investigate: Why is the stapler unable to validate or attach the ticket even though notarization completes successfully? Are there any known issues, entitlements, or workflow adjustments recommended in this case? Is any special handling required for Electron apps’ PKG/DMG packages or Hardened Runtime configurations during stapling? I can provide the signed DMG/PKG and full notarization logs upon request. Thank you very much for your assistance — looking forward to your guidance. Best regards, Murugavel COSGrid Systems Private Limited

Greetings! I've notarized my app but it spends always over 1 hour. I think it's because the app size is about 30GB, but is there any way to reduce it?

I submitted a mac app for Notarization. For the first few tries the Notarization failed with an error "Team is not yet configured for Notarization" but few days after my account started to show "ENROLL" option again even though my membership was set to expire on 2026. I am doubting my account has been suspended. I have not received any emails from apple regarding the suspension. I have contacted support but no help yet ! This was the second year, i was paying for the membership. Could you please help me to - Help me get the account unsuspended (if it is, as there is no notification or information regarding this) If the account is suspended due to my app being submitted for Notarization then help me identify the reason so that i can fix them. Mac App is Time Tracking application that runs in background and capture periodic screenshot backlsh.com (NOTE - I am doing this after taking user consent)