Existing smartphones store multiple NFC card information. When the NFC antenna of the phone is close to the card reader, it is usually necessary to open the APP to select NFC card information or default to one card information to be transmitted to the card reader. It is not possible to quickly select or switch cards among multiple cards. For example, after using the NFC function to swipe the subway card, the phone needs to open the car access control and community access control again. It is necessary to open the mobile NFC card information management APP to select the community access control card and then swipe the mobile NFC access control, which causes inconvenience. （现有的智能手机存储多个 NFC 卡信息。当手机的NFC天线靠近读卡器时，通常需要打开APP选择NFC卡信息或默认一个卡信息传输到读卡器。无法在多张卡之间快速选择或切换卡。例如，使用NFC功能刷完地铁卡后，手机需要重新打开车内门禁和小区门禁。需要打开手机NFC卡信息管理APP选择社区门禁卡，然后刷手机NFC门禁，造成不便。） Divide the smartphone screen into multiple areas, and users can freely define corresponding NFC information for each area. When the screen is turned off and not unlocked, select NFC card information by pressing different screen areas with your fingers. When the mobile NFC is close to the card reader, the selected card information will be transmitted to the reader(将智能手机屏幕划分多个区域，每个区域手机用户可以自由定义对应NFC信息。在熄屏’不解锁的情况下，通过手指按压不同屏幕区域选择NFC卡片信息，手机NFC贴近读卡器时将选择的卡片信息传递给读卡器。) Below, the method will be further explained in conjunction with the accompanying drawings and embodiments. Figure 1 is a schematic diagram of a utility model; Figure 2 is the flowchart of the present utility model; NFC reader, 2. Mobile screen partition, 3. NFC signal in Figure 1. In Figure 2, 1. Press the area of the screen partition with your finger. 2. Place the phone close to the NFC reader. 3. The phone senses the returned NFC signal. 4. The phone detects the pressed area.（ 下面结合附图和实施例对方法进一步说明。 图1为实用新型示意图； 图2为本实用新型流程图； 图1中1.NFC读取器，2.手机屏幕分区，3.NFC信号。 图2中1.手指按压屏幕分区的区域2.手机贴近NFC读取器3.手机感应到返回的NFC信号4.手机检测到按压的区域，5.是否检测到手机用户按压区域的动作，6.检测到按压区域，根据按压区域做出匹配相对应的NFC的动作7.选择用户所需的NFC卡8.NFC卡收到信息并发出卡片信息9.NFC读卡器收到NFC卡的信息。） For example, a smartphone user has N NFC virtual cards in their phone. Users can divide the smartphone screen into N areas, distinguished as A area, B area, C area..., each area controls different NFC. When a smartphone user holds down the B area that controls NFC (such as virtual access cards) and brings the phone close to the NFC card reader (such as access control). The mobile phone will sense NFC signals (access control signals), triggering the phone to detect the area that the user is pressing. There are two possibilities. Firstly, if the user's pressing action is not detected, the NFC card corresponding to the default A zone (set as the default here) will be selected. If the user's pressing action is detected and it is detected that the pressing is in Zone B (the partition corresponding to the access card), then the NFC information corresponding to Zone B is triggered. The smartphone receives this message, and the corresponding NFC sends out a card message. The NFC card reader (access control device) receives the message and reacts (door opens).（例如，一智能手机用户手机中有N个NFC虚拟卡。用户可以将智能手机屏幕分为N个区域，分辨为A区、B区、C区······，每个区域分别控制不同的NFC。当智能手机用户按住控制NFC（如虚拟门禁卡）的B区域并将手机靠近NFC读卡器（如门禁）。手机将会感应到NFC信号（门禁信号），触发手机检测用户正在按压的区域。有两种可能性，第一没有检测到用户的按压动作则选择默认的A区（这里把A区设为默认）所对应的NFC卡。第二检测到用户的按压动作并检测出按压的是B区域（门禁卡所对应的分区），则触发B区域所对应的NFC信息。智能手机收到此信息，相对应的NFC发出卡片信息，NFC读卡器（门禁设备）收到信息，做出反应（门打开）。） 图1 image1 图2 image2

Hi Guys, I noticed that with Icon Composer when you export the icon it does not export a square image, is there any way of doing it or that's how it is now? Checking the icon on the iPhone something doesn't seem right...

I am creating a shooting game which uses Game Center for multiplayer and I want to make the Matchmaker view look different. How can I do that?

Hi everyone, I’m testing our SwiftUI app on both Xcode simulator and a real iPhone. On the simulator, everything looks clean and aligned. But when I run it on an actual iPhone (same build, iOS 18), the layout looks broken—fonts overlap, spacing is off, and elements are misaligned. Both screenshots are from the exact same screen and time. First is simulator, second is iPhone. Any idea why this difference happens? Is there something I should check in terms of rendering or layout settings? Thanks in advance!

In the clock app when making an alarm for myself to wake up, I found this bug where If you swipe left On an alarm without deleting it and then Swipe right it does a goofy visual glitch where it teleports to the top of your screen.

Hi there I have developed an offline algorithm for calculating tides, which works based on the built-in database of tidal stations in some regions. The algorithm works correctly and the results match the real data. I would like to receive and add moon data from Weather Kit to the algorithm for performance improvement experiments. What requirements do I need to apply to the application so that I can use data from Weather Kit in my algorithm ?

Hi, I'm trying to create a visualization using charts for vision pro. I want to create a line chart that connects pair of points on a donut chart. So i'm trying to draw the lines radially but it seems that the line chart always has only the bottom left corner of the view as origin. How can I tranform the origin to center of the view?

I've deleted all photos from the Photos app including from the Deleted Photos album, yet iPhone Storage reports Photos storage at 62.3 GB. I believe this is due to a bug. I've found no solution.

Ii have been waiting a couple of days for access to image playground also. I wonder if having my VPN activated during my initial early access request right after I installed 18.2 somehow put me in some sort of loop that’s not allowing me to be granted access. Is there anyone that has been waiting that had their VPN on when they requested early access?

We are working on one of the projects for Hackathon for which we need to access the 3D Models of Apple Watch, it will help in making our project more realistic and effective, I wanted to know if we can get access for the same.

This update seems to have taken away customization features. So now I just have to have the same lock screen and home screen background? There’s no way to have 2 separate images anymore? Also I have my phone in darkmode so now I just have to deal with the ugly black thumbnails for the app? I can’t revert them to normal colors while keeping dark mode?

Hello everyone! The Swift Student Challenge officially starts tomorrow (February 3rd), and I have a question. Am I allowed to use tools like Photoshop to create artwork for my project? I’d appreciate any clarification. Thanks in advance!

this is a test post

Is there a way to revert back to the old designs? The new designs in iOS 18 are so bad and hard to use. I can’t imagine anyone actively tested this for user feedback before releasing.

The brand new animation in Stage Manager greatly reduced dizziness. However, don’t know why it ONLY applies when no window was presented. What would be the problem elsewhere? Stage Manager is one of pretty few motion pictures that annoyed me and forced me to turn on Reduce Motion, or stop using Stage Manager. Big pity… macOS 26.0 (25A5346a) wont use ipad to post…

Prior to iOS 18 I could interact with my touchscreen when my phone was in standby mode. This was perfect because I could check weather, time, date, pause and play music, change songs, all at my desk, all without picking up my phone from the wireless charger. This feature is now gone in iOS 18 and I would REALLY like it back. It was super useful all day at work and now I’m constantly fumbling with my phone for every little thing.

This is my first day with IOS 18.1.1 and so far it’s smooth. my only problem is how chaotic the photos app has become during the update. For one, i dont like how to access any of the organization it’s at the way bottom and even after customizing and reorganizing there’s no way to to move that section to the top. i also dont like how all my photos are just out on front street when the app is launched, it makes everything hard to look at and hard to find. please fix this and make browsing photos enjoyable again.

I have completed a code with chatgpt and I am unising the latest version of code. i am also using an m1 MacBook air (2020). would love to know if anyone have resolved this issue. by using the ai to correct the code it disrupts it with something. an incorrect imoout line,but after multiple attempts ai get it right. I have notice that the code shows up on the start meaning run, take some time to load the intro page.

Hi community, I have a question regarding MusicKit, is it necessary to follow a design guideline to integrate this framework into my App? Also, when no music is reproducing in MusicKit which placeholder we should show, do you provide the resource? Or can we create our own placeholder? Thanks for all, David.

Is there any way to lock the clock in Standby so it doesn't change? It is so frustrating when I put the phone on the charger and have to scroll back and forth, trying to find the clock I would like to use all the time.