Hello, I'm trying to create a webbrowser but currently when signed into apple music webplayer I get the following message when I attempt to play on any versions of my webbrowser: Not available on the web You can listen to this in the Apple Music app. Is there a way to setup DRM (assuming this is the issue) with apple to allow my webbrowser to play this content? I believe Apple TV is also affected. Thank you ahead of time.

the problem is when using HLS live stream with AVPlayer on iOS/ tvOS the player chooses first highest bandwidth then slowly steps down to lowest (within 1-3min) and eventually steps up again then repeats to step down. the AVPlayer error log sends events: errorStatusCode: -12888, errorDomain: Optional("CoreMediaErrorDomain"), errorComment: Optional("The operation couldn't be completed. (CoreMediaErrorDomain error -12888 - Playlist File unchanged for longer than 1.5 * target duration we use standard segments in CMAF format, 2sec duration #EXTM3U #EXT-X-VERSION:6 #EXT-X-TARGETDURATION:2 #EXT-X-MEDIA-SEQUENCE:147065903 #EXT-X-MAP:URI="video_1_4660000_init.mp4?device_profile=cmaf_cbcs_verimatrix_cei%26seg_size=2%26cmaf=2" #EXT-X-PROGRAM-DATE-TIME:2025-04-30T12:51:07 #EXTINF:2.000, video_1_4660000_t17460174670001555.mp4?device_profile=cmaf_cbcs_verimatrix_cei%26seg_size=2%26cmaf=2 #EXTINF:2.000, video_1_4660000_t17460174690001555.mp4?device_profile=cmaf_cbcs_verimatrix_cei%26seg_size=2%26cmaf=2 #EXTINF:2.000, video_1_4660000_t17460174710001555.mp4?device_profile=cmaf_cbcs_verimatrix_cei%26seg_size=2%26cmaf=2 when using 6sec segments the player stays stable at highest bandwidth. is there a way to avoid this error? in AVPlayer or HLS configuration?

who can help me to make app for iOS with XCode

i need to make app for iOS to get code for XCode

We've successfully implemented an AVAssetWriter to produce HLS streams (all code is Objective-C++ for interop with existing codebase) but are struggling to extend the operations to use tagged buffers. We're starting to wonder if the tagged buffers required for an MV-HEVC signal are fully supported when producing HLS segments in a live-stream setting. We generate a live stream of data using something like: UTType *t = [UTType typeWithIdentifier:AVFileTypeMPEG4]; m_writter = [[AVAssetWriter alloc] initWithContentType:t]; // - videoHint describes HEVC and width/height // - m_videoConfig includes compression settings and, when using MV-HEVC, // the correct keys are added (i.e. kVTCompressionPropertyKey_MVHEVCVideoLayerIDs) // The app was throwing an exception without these which was // useful to know when we got the configuration right. m_video = [[AVAssetWriterInput alloc] initWithMediaType:AVMediaTypeVideo outputSettings:m_videoConfig sourceFormatHint:videoHint]; For either path we're producing CVPixelBufferRefs that contain the raw pixel information (i.e. 32BGRA) so we use an adapter to make that as simple as possible. If we use a single view and a AVAssetWriterInputPixelBufferAdaptor things work out very well. We produce segments and the delegate is called. However, if we use the AVAssetWriterInputTaggedPixelBufferGroupAdaptor as exampled in the SideBySideToMVHEVC demo project, things go poorly. We create the tagged buffers with something like: CMTagCollectionRef collections[2]; CMTag leftTags[] = { CMTagMakeWithSInt64Value( kCMTagCategory_VideoLayerID, (int64_t)0), CMTagMakeWithSInt64Value( kCMTagCategory_StereoView, kCMStereoView_LeftEye) }; CMTagCollectionCreate( kCFAllocatorDefault, leftTags, 2, &(collections[0]) ); CMTag rightTags[] = { CMTagMakeWithSInt64Value( kCMTagCategory_VideoLayerID, (int64_t)1), CMTagMakeWithSInt64Value( kCMTagCategory_StereoView, kCMStereoView_RightEye) }; CMTagCollectionCreate( kCFAllocatorDefault, rightTags, 2, &(collections[1]) ); CFArrayRef tagCollections = CFArrayCreate( kCFAllocatorDefault, (const void **)collections, 2, &kCFTypeArrayCallBacks ); CVPixelBufferRef buffers[] = {*b, *alt}; CFArrayRef b = CFArrayCreate( kCFAllocatorDefault, (const void **)buffers, 2, &kCFTypeArrayCallBacks ); CMTaggedBufferGroupRef bufferGroup; OSStatus res = CMTaggedBufferGroupCreate( kCFAllocatorDefault, tagCollections, b, &bufferGroup ); Perhaps there's something about this OBJC code that I've buggered up? Hopefully! Anyways, when I submit this tagged bugger group to the adaptor: if (![mvVideoAdapter appendTaggedPixelBufferGroup:bufferGroup withPresentationTime:pts]) { // report error... } Appending does not raise any errors - eventually it just hangs on us and we never return from it... Real Issue: So either: The delegate assigned to the AVAssetWriter doesn't fire its assetWriter callback which should produce the segments The adapter hangs on the appendTaggedPixelBufferGroup before a segment is ready to be completed (but succeeds for a number of buffer groups before this happens). This is the same delegate class that's assigned to the non multi view code path if MV-HEVC is turned off which works perfectly.

Hi everyone! I’ve been working with AVFoundation and trying to use the AVMetricEventStreamPublisher to discover media performance metrics, as described in the Apple documentation. https://developer.apple.com/cn/videos/play/wwdc2024/10113/?time=508 However, when following the example code, I’m not getting the expected results. The performance metrics for both audio and video don’t seem to be captured properly. Has anyone successfully used this example code? If so, could you share your experience or any solutions you’ve found? Any tips or insights would be greatly appreciated. Thanks in advance! Ps. the example code: AVPlayerItem *item = ... AVMetricEventStream *eventStream = [AVMetricEventStream eventStream]; id subscriber = [[MyMetricSubscriber alloc] init]; [eventStream setSubscriber:subscriber queue:mySerialQueue] [eventStream subscribeToMetricEvent:[AVMetricPlayerItemLikelyToKeepUpEvent class]]; [eventStream subscribeToMetricEvent:[AVMetricPlayerItemPlaybackSummaryEvent class]]; [eventStream addPublisher:item];

I did watch WWDC 2019 Session 716 and understand that an active audio session is key to unlocking low‑level networking on watchOS. I’m configuring my audio session and engine as follows: private func configureAudioSession(completion: @escaping (Bool) -> Void) { let audioSession = AVAudioSession.sharedInstance() do { try audioSession.setCategory(.playAndRecord, mode: .voiceChat, options: []) try audioSession.setActive(true, options: .notifyOthersOnDeactivation) // Retrieve sample rate and configure the audio format. let sampleRate = audioSession.sampleRate print("Active hardware sample rate: \(sampleRate)") audioFormat = AVAudioFormat(standardFormatWithSampleRate: sampleRate, channels: 1) // Configure the audio engine. audioInputNode = audioEngine.inputNode audioEngine.attach(audioPlayerNode) audioEngine.connect(audioPlayerNode, to: audioEngine.mainMixerNode, format: audioFormat) try audioEngine.start() completion(true) } catch { print("Error configuring audio session: \(error.localizedDescription)") completion(false) } } private func setupUDPConnection() { let parameters = NWParameters.udp parameters.includePeerToPeer = true connection = NWConnection(host: "***.***.xxxxx.***", port: 0000, using: parameters) setupNWConnectionHandlers() } private func setupTCPConnection() { let parameters = NWParameters.tcp connection = NWConnection(host: "***.***.xxxxx.***", port: 0000, using: parameters) setupNWConnectionHandlers() } private func setupWebSocketConnection() { guard let url = URL(string: "ws://***.***.xxxxx.***:0000") else { print("Invalid WebSocket URL") return } let session = URLSession(configuration: .default) webSocketTask = session.webSocketTask(with: url) webSocketTask?.resume() print("WebSocket connection initiated") sendAudioToServer() receiveDataFromServer() sendWebSocketPing(after: 0.6) } private func setupNWConnectionHandlers() { connection?.stateUpdateHandler = { [weak self] state in DispatchQueue.main.async { switch state { case .ready: print("Connected (NWConnection)") self?.isConnected = true self?.failToConnect = false self?.receiveDataFromServer() self?.sendAudioToServer() case .waiting(let error), .failed(let error): print("Connection error: \(error.localizedDescription)") DispatchQueue.main.asyncAfter(deadline: .now() + 2) { self?.setupNetwork() } case .cancelled: print("NWConnection cancelled") self?.isConnected = false default: break } } } connection?.start(queue: .main) } Duplex in this context refers to two-way audio transmission simultaneously recording and sending audio while also receiving and playing back incoming audio, similar to a VoIP/SIP call. The setup works fine on the simulator, which suggests that the core logic is correct. However, since the simulator doesn’t fully replicate WatchOS hardware behavior especially for audio sessions and networking issues might arise when running on a real device. The problem likely lies in either the Watch’s actual hardware limitations, permission constraints, or specific audio session configurations. I am reaching out to seek further assistance regarding the challenges I've been experiencing with establishing a UDP, TCP & web socket connection on watchOS using NWConnection for duplex audio streaming. Despite implementing the recommendations provided earlier, I am still encountering difficulties From what I can see, your implementation is focused on streaming audio playback with the server. In my case, I'm looking for a slightly different approach: I want to capture audio and send buffers of a specific size to the server while playing audio simultaneously, essentially achieving full duplex streaming similar to a VOIP call. Additionally, I’d like to ensure that if no external audio route is connected, the Apple Watch speaker is used by default. Any thoughts or insights on adapting this setup for those requirements would be very welcome.

Is there a way to install HLS tools on ARM Linux? The only one I can find is for x86 Linux. I'm working on a project on a Raspberry Pi. I'd like to install the tool to generate my hls files, but the alternatives are more complicated to use. Is there a way to run them like Mac OS does with Rosseta?

Is it possible to stream video from a UVC (USB Video Class) camera on an iPhone 15? If so, are there any specific hardware or software requirements to enable this functionality?

The app registers a periodic time observer to the AVPlayer when the playback starts and it works fine. When switching to AirPlay during playback, the periodic time observation continues working as expected. However, when switching back to local playback, the periodic time observer does not fire anymore until a seek is performed. The app removes the periodic time observer only when the playback stops. I can see that when switching back to local playback, the timeControlStatus successively changes to .waitingToPlayAtSpecifiedRate (reason: .evaluatingBufferingRate) then to .waitingToPlayAtSpecifiedRate (reason: .toMinimizeStalls) and finally to .playing But the time observation does not work anymore. Also, the issue is systematic with Live and VOD streams providing a program date (with HLS property #EXT-X-PROGRAM-DATE-TIME), with or without any DRM, and is never reproduced with other VOD streams.

Hello! I have been following the UsingAVFoundationToPlayAndPersistHTTPLiveStreams sample code in order to test persisting streams to disk. In addition to support for m3u8, I have noticed in testing that this also seems to work for MP3 Audio, simply by changing the plist entries to point to remote URLs with audio/mpeg content. Is this expected, or are there caveats that I should be aware of? Thanks you!

Hello Apple Developer Community, I am trying to play an HLS stream using the React Native Video player (underneath it's using AvPlayer). I am able to play the stream smoothly, but in some cases the player can not play the stream properly. Behaviour: react-native-video: I am getting the below error. Error details from react-native-video player: Error Code: -12971 Domain: CoreMediaErrorDomain Localised Description: The operation couldn’t be completed. (CoreMediaErrorDomain error -12971.) Target: 2457 The error does not provide a specific failure reason or recovery suggestion, which makes troubleshooting challenging. AvPlayer on native iOS project: Video playback stopped after playing a few seconds. AVPlayer configuration: player.currentItem?.preferredForwardBufferDuration = 1 player.automaticallyWaitsToMinimizeStalling = true N.B.: The same buffer duration is working perfectly for others. Stream properties: video resolution: 1280 x 720 I have attached an overview report generated from MediaStreamValidator. I would appreciate any insights or suggestions on how to address this error. Has anyone in the community experienced a similar issue or have any advice on potential solutions? Thank you for your help!

We are encountering an issue where AVPlayer throws the error: Error Domain=AVFoundationErrorDomain Code=-11819 "Cannot Complete Action" > Underlying Error Domain[(null)]:Code[0]:Desc[(null)] This error seems to occur intermittently during video playback, especially after extended usage or when switching between different streams. We observe Error 11819 (AVFoundationErrorDomain) in Conviva platform that some of our users experience it but we couldn't reproduce it so far and we’re need support to determine the root cause and/or best practices to prevent it. Some questions we have: What typically triggers this error? Could it be related to memory/resource constraints, network instability, or backgrounding? Are there any recommended ways to handle or recover from this error gracefully? Any insights or guidance would be greatly appreciated. Thanks!

I’m building a professional camera app where users can customize the video recording format and color grading. In the func captureOutput(_ output: AVCaptureOutput, didOutput sampleBuffer: CMSampleBuffer, from connection: AVCaptureConnection) method, I handle video frames and use Metal for real-time color grading. This works well when device.activeColorSpace is sRGB or P3, and the results are great. However, when the color space is HLG_BT2020 or appleLog, the MTKTextureLoader.newTexture(cgImage: cgImage, options: options) method throws an error. After researching, I found that the video frame in these color spaces has a bit-per-channel (bpc) greater than 8 after being converted to CGImage, causing the texture creation to fail. I tried converting the CGImage to a lower bpc to successfully create the texture, but the final output image is garbled and not as expected. Is there a solution to this issue?

Hello, hope everybody is doing well. I have some reels (of aspect ratio 9X16) content, which I want to playback on iOS phones. My question is does AV player support out of box playback of encrypted Mp4. Please note, this is not HLS fMp4, rather unfragmented Mp4 content. If it is supported, what algorithm of encryption shall be used? Please let me know.

FairPlay-Protected HLS Files Not Transferred via Quick Start I have an iOS app that downloads HLS files, which are protected by FairPlay. These files are stored locally, and their locations are managed using Core Data. When playing these tracks, I use AVURLAsset to access the stored file paths. Recently, a client upgraded to a new iPhone and used Quick Start to transfer data from his old device. While all other app data was successfully transferred, including Core Data records and UserDefaults, the actual HLS files were missing. As a result, the app retained metadata about the downloaded content, but the files themselves were gone, causing playback failures. Does Quick Start exclude certain types of locally stored files, especially DRM-protected HLS downloads, or is the issue related to how FairPlay-protected content is handled during the transfer of locally stored files?

Since iOS and tvOS 18, CMCD can now be automatically sent by AVPlayer (https://developer.apple.com/streaming/Whats-new-HLS.pdf). However, after enabling CMCD, our streams occasionally fail with the following error: CoreMediaErrorDomain Error -17383 This issue appears to affect only DRM-protected (FairPlay) streams so far. We activate CMCD via the resource loader of an AVURLAsset, before assigning the item to an AVPlayer. Unfortunately, we haven’t found a reliable way to reproduce the issue, and we’ve been unable to gather any useful diagnostic information. Has anyone else observed this behavior when enabling CMCD on FairPlay streams?

We are getting reports from customers that they are not able to play videos in our app after updating their phones to iOS18.3.1. (Further checking indicates that it happens on all iOS18 versions. It suddenly started occurring from February 18th, 2025) When checking logs we see that playback is failing due to CoreMediaErrorDomain error -42709. This is an undocumented error code and hence we do not know the cause of the playback issue. Does anyone know what this error code means and how the app should handle it? Reported as FB16638501.

I have an SCStreamDelegate for capturing frames from applications. On recent point releases of macOS Sonoma, I've noticed that the stream is being cancelled with no user action being taken. I started trying to debug it and when my on error method is called, the error parameter being passed is null: func stream(_ stream: SCStream, didStopWithError error: Error) { /*debugger shows this and segfaults if I try to print "\(error)" error (Error) > error = (Builtin.RawPointer) 0x0 */ From what I can tell, error should be a valid NSError so I can check the error code, based on similar code I've seen in, for example OBS (https://github.com/obsproject/obs-studio/blob/265239d4174f8d291b0de437088c5b78f8e27687/plugins/mac-capture/mac-sck-common.m#L29) Usually when this happens, the menubar icon for screen sharing (where I would click to change sharing window, etc) stays there even after my app has closed an no apps are doing sharing stuff. Has anyone come across this before? Am I misinterpreting what the debugger is saying about the error parameter? I'm running macos 14.7.3, but I just updated from 14.7.2 earlier and had basically the same issue on both macos versions

I am playing FairPlay + Multi-Key content (fMP4) in Safari browser. I want to implement the implementation to distinguish between SD and HD video quality, and play it in HD if HDCP is supported, and in SD if HDCP is not supported. I have already confirmed that HDCP support is the default, and that a black screen is output in non-HDCP environments. What I want is to improve the user experience by appropriately switching to SD/HD depending on HDCP support when playing DRM content. Question: Is there an API or function that can detect HDCP support in Safari through JavaScript or other methods? Or is there a way to indirectly guess it?