We’ve run into what looks like a gap in how forceAirDropUnmanaged is enforced on iOS devices. Setup: Device: iOS 17.x (unsupervised, enrolled in MDM) MDM Restriction: forceAirDropUnmanaged = true Managed Open-In restriction also applied (block unmanaged destinations). Verified: from a managed app, the AirDrop icon is hidden in the share sheet. This part works as expected. Issue: When two iOS devices are brought close together, the proximity-initiated AirDrop / NameDrop flow still allows transfer of photos, videos, or files between devices. In this path, forceAirDropUnmanaged does not appear to apply, even though the same restriction works correctly in the standard sharing pane. What I’d expect: If forceAirDropUnmanaged is enabled, all AirDrop transfer paths (including proximity/NameDrop) should be treated as unmanaged, and thus blocked when “Managed Open-In to unmanaged destinations” is restricted. What I observe instead: Share sheet → AirDrop hidden ✅ Proximity/NameDrop → transfer still possible ❌ Questions for Apple / Community: Is this a known limitation or expected behavior? Is there a different restriction key (or combination) that also covers proximity-based AirDrop? If not currently supported, should this be filed as Feedback (FB) to request alignment between share sheet AirDrop and NameDrop enforcement? This behaviour introduces a compliance gap for organisations relying on MDM to control data exfiltration on unsupervised or user-enrolled devices. Any clarification or guidance would be greatly appreciated.

We’re running into a problem when deploying certain .pkg installers via MDM on macOS 15 and above. The installation fails with the following error message: “The app is running and we don’t have the context to quit it, failing install.” Context: The .pkg is being pushed through an MDM solution (not installed manually). This happens consistently across multiple macOS 15+ devices. The target app is often already running when the MDM tries to install the update. Unlike a manual installation, the MDM does not appear to have the ability to quit the running app before proceeding. Questions: Is this a known change in macOS 15 where MDM-delivered installs no longer have permission to terminate apps during package installation? Are there recommended best practices for handling app updates via .pkg through MDM in this scenario? Has anyone implemented a workaround—such as pre-install scripts, user notifications, or policies to quit the app before running the installer—that works reliably on macOS 15? Is Apple planning to update MDM behavior or installer APIs to address this, or should admins expect to handle quitting apps entirely outside of the MDM installation process? Any insights from Apple engineers or other developers/admins who have encountered this would be really helpful.

Environment Devices: e.g., iPhone 12 mini, iPhone 16 (multiple units) OS: iOS 26 beta 2 and beta 4 (23A5297m) Distribution: Apple Enterprise Program (In-House), deployed via MDM InstallApplication Tooling: Xcode (latest available for iOS 26 betas) Summary Apps signed for Enterprise (In-House) distribution install successfully on iOS 26 betas via MDM, but terminate immediately on launch. The same builds run if installed from Xcode on the same devices. This is a regression from pre-iOS 26 versions where Enterprise builds installed via MDM launched normally. Steps to Reproduce Archive an iOS app and export for Enterprise (In-House) distribution. Deploy the .ipa via MDM using InstallApplication to a device on iOS 26 beta (e.g., 23A5297m). Tap the app icon to launch. Actual Result The app quits instantly on launch. System logs show launchd/runningboard errors, including NSPOSIXErrorDomain Code=85 (“Bad executable (or shared library)”): runningboardd(RunningBoard)[34]: Process start failed with Error Domain=NSPOSIXErrorDomain Code=85 "Bad executable (or shared library)" UserInfo={NSLocalizedDescription=Launchd job spawn failed} runningboardd(RunningBoard)[34]: Launch failed with Error Domain=NSPOSIXErrorDomain Code=85 "Bad executable (or shared library)" SpringBoard(FrontBoard)[35]: Bootstrapping failed ... NSUnderlyingError = { NSLocalizedDescription = Launchd job spawn failed; } Expected Result Enterprise-signed builds installed via MDM should launch as they did on iOS 25.x and earlier. Regression? Works on iOS versions prior to 26. Works on iOS 26 betas when installed from Xcode (developer-signed run). Fails only for Enterprise (In-House) builds delivered via MDM. Additional Notes / Possibly Related We also reproduced a similar failure mode with a minimal Safari Web Extension project: it installs and appears under Settings → Safari → Extensions, but enabling it and opening Safari produces: “ is no longer available.” Building a fresh project with a new bundle ID shows the same behavior on iOS 26 beta (23A5297m). Logs contain: Error occurred during transaction: The provided identifier "" is invalid. Running from Xcode (debug build) works. Workarounds None identified for Enterprise/MDM distribution. Only Xcode-installed builds run. Impact Blocks Enterprise deployment to our fleet on iOS 26 betas. Feedback / Attachments Included: sysdiagnose from an affected device, minimal Xcode project demonstrating the issue, Enterprise-exported app, and reproduction notes. Happy to share additional logs or perform targeted tests if needed. Request Can Apple confirm whether this is a known regression vs. a policy/validation change in iOS 26 for Enterprise/MDM installs? Any guidance on a short-term mitigation or build/signing change we can apply would be appreciated.

Nuestra cuenta está aprobada como MDM Vendor y necesitamos emitir por primera vez el certificado APNs para MDM en el portal de Push Certificates. Procedimiento seguido Primero hemos descargado desde nuestra cuenta de Apple Developer el certificado de MDM Vendor y lo hemos instalado en el ordenador. Esto lo hemos hecho para que, al lanzar la instrucción de OpenSSL, se pueda utilizar el UUID gestionado por Apple y así generar el CSR de forma correcta. La instrucción que estamos ejecutando es la siguiente: openssl req -new -newkey rsa:2048 -nodes -keyout mdm_private.key -out mdm.csr -subj "/O=Numbux/OU=MDM/CN=com.apple.mgmt.External." El CSR resultante es puro (no está firmado ni empaquetado) y está generado con RSA 2048 y SHA256. Sin embargo, al subirlo al portal de Push Certificates, seguimos recibiendo el error “invalid signing request”. Solicitud Dado que es nuestra primera emisión, entendemos que necesitamos el External UUID asignado por Apple a nuestra organización, porque veo que el problema se deriva de una incorrecto UUID que se está generando en el comando OpenSSL. ¿Podríais confirmarnos cuál es ese valor para poder completar el CSR y así emitir correctamente el certificado APNs MDM? He llamado a los números 900 812 703 y al 900 812 468 y he escrito al soporte de developer. NADIE ES CAPAZ DE DARMELO. Sin el external UUID no puedo crear el APN para mi MDM. Alguien me puede ayudar? No me mandeis links ni posibles números que llamar porque ya lo he hecho.

We've disabled FUS through a config profile, but users can still access FUS by enabling the MenuBar/Control Center icons. My org would like to prevent access to FUS so I've created a config profile. But the profile doesn't seem to work. Anyone have any ideas what I'm missing, or is this an OS bug? <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadDisplayName</key> <string>macOS - Tahoe - Disable Fast User Switching Control Center</string> <key>PayloadIdentifier</key> <string>com.myorg.fast-user-switching</string> <key>PayloadType</key> <string>Configuration</string> <key>PayloadScope</key> <string>System</string> <key>PayloadUUID</key> <string>f1a2b3c4-d5e6-7890-abcd-ef1234567890</string> <key>PayloadVersion</key> <integer>1</integer> <key>TargetDevmyorgType</key> <integer>5</integer> <key>PayloadContent</key> <array> <dict> <key>PayloadType</key> <string>com.apple.controlcenter</string> <key>PayloadVersion</key> <integer>1</integer> <key>PayloadIdentifier</key> <string>com.apple.controlcenter.57EBEF9E-E568-411E-AE27-500AD98C94F4</string> <key>PayloadUUID</key> <string>f1a2b3c4-d5e6-7890-abcd-ef1234567890</string> <key>UserSwitcher</key> <integer>8</integer> </dict> <dict> <key>PayloadType</key> <string>.GlobalPreferences</string> <key>PayloadVersion</key> <integer>1</integer> <key>PayloadIdentifier</key> <string>.GlobalPreferences.71DE1486-60BC-4CB9-890D-AD50A772890D</string> <key>PayloadUUID</key> <string>c5234012-e0sw-2066-6fl8-3bd5p8125op7</string> <key>MultipleSessionEnabled</key> false/> </dict> </array> </dict> </plist>

We are experiencing an issue with Apple Business Manager (ABM) synchronization that is blocking our device management workflow. Issue Description: During the ABM sync process in our MDM, we receive the error: "ABM Terms and Conditions not signed." What We’ve Checked: Logged into the ABM portal as the Administrator and confirmed that the latest Terms and Conditions. Attempted to renew the ABM token on our existing server, but the same error message continues to appear in MDM. Tried creating a brand new ABM server integration, which also fails with the same error. We checked with our MDM provider and they shared the logs, response received from ABM. It says T_C_NOT_SIGNED. But we have already accepted all the new Terms in ABM. We would appreciate any help in resolving this issue or guidance on what steps to take next.

Hello, I’m facing an issue while trying to add iOS devices to Apple Business Manager (ABM) using Apple Configurator during enrollment. When going through the setup process, the device fails to complete enrollment and times out. I’ve tried it multiple times. The device does appear in ABM during the process and I am able to assign it to different MDM servers but since the setup times out and fails, the device is automatically released. I have tried this with multiple iOS devices and it times out on every single one of them. Steps attempted: Factory reset and re-enrollment of the device Ensured network connectivity is stable and tested on multiple Wi-Fi networks Tried the following process using Apple Configurator on Mac (wired): Created a Wi-Fi profile in Configurator Connected the iPhone via cable and used Prepare (manual configuration) Used the “MDM server” placeholder and trusted anchors (as recommended) Linked the device to the ABM organization Skipped Setup Assistant steps Attached the Wi-Fi profile, then prepared and wiped the device Verified that the device should appear in ABM Attempted to assign the device to my MDM in ABM Despite these checks, the enrollment process times out. I’m attaching a screenshot of the error for reference. Could someone advise what might be causing this timeout or how I can further troubleshoot this? Any guidance would be greatly appreciated. Thanks in advance.

Issue Description: We are experiencing MDM profile installation failures specifically on iPhone 17 devices. After extensive testing and comparison between affected and working devices, we suspect this appears to be a parameter transmission error rather than device settings. Technical Analysis: Device Settings Comparison: No differences found between problematic and working devices in system settings, indicating this is not a configuration issue. Suspected Parameter Transmission Error: • Device model information appears to be restricted or blocked during profile download • User ID and phone number parameters are not being transmitted to the server • Installation logs show missing login ID and phone number entries Symptoms: • During MDM profile installation, the "Apps & Restrictions" section that should appear is missing • Profile download parameters are suspected to not be properly transmitted to the server • Installation process fails at the profile configuration stage Critical Finding: When we cloned a previously working device to create a problematic device configuration, the cloned device also began experiencing the same installation failures. This strongly suggests the issue is related to device-specific parameters or identifiers. Additional Information: We continue to receive reports of this issue from our iPhone 17 users, and these reports are occurring across various iOS versions. Request for Assistance: Has anyone encountered similar MDM profile installation issues on iPhone 17? Are there known limitations or changes in how device parameters are transmitted during MDM enrollment on this model? Any guidance on debugging parameter transmission or known workarounds would be greatly appreciated.

On iOS 26, if in "Single App Mode", the device gets stuck on the lock screen. Devices are configured in SAM (kiosk mode), without a PIN requirement. Since updating to iPadOS 26, every single device that locks (goes to sleep) becomes completely unresponsive at the lock screen. Touch input does not work. The only way to regain access is to reboot the device, which will boot to the SAM app, but then lock again if it goes to sleep. Related discussion in the public forums.