Hi, I'm working on a project that uses the AVSpeechSynthesizer and AVSpeechUtterance. I discovered by chance that the AVSpeechSynthesizer automatically completes some words instead of just outputting what it's supposed to. These are abbreviations for days of the week or months, but not all of them. I don't want either of them automatically completed, but only the specified text. The completion transcends languages. I have written a short example program for demonstration purposes. import SwiftUI import AVFoundation import Foundation let synthesizer: AVSpeechSynthesizer = AVSpeechSynthesizer() struct ContentView: View { var body: some View { VStack { Button { utter("mon") } label: { Text("mon") } .buttonStyle(.borderedProminent) Button { utter("tue") } label: { Text("tue") } .buttonStyle(.borderedProminent) Button { utter("thu") } label: { Text("thu") } .buttonStyle(.borderedProminent) Button { utter("feb") } label: { Text("feb") } .buttonStyle(.borderedProminent) Button { utter("feb", lang: "de-DE") } label: { Text("feb DE") } .buttonStyle(.borderedProminent) Button { utter("wed") } label: { Text("wed") } .buttonStyle(.borderedProminent) } .padding() } private func utter(_ text: String, lang: String = "en-US") { let utterance = AVSpeechUtterance(string: text) let voice = AVSpeechSynthesisVoice(language: lang) utterance.voice = voice synthesizer.speak(utterance) } } #Preview { ContentView() } Thank you Christian

Hello, I need to know what is a unique identifier of a MIDI device (source/destination). Important note: I want to get the same ID when a device is reconnected (unplugged and then plugged again). The main candidate is kMIDIPropertyUniqueID property. But I don't know if it meets the requirement above or not. Additional question: is it always available for any endpoint? Also there is kMIDIPropertyDeviceID property. What about it? And one more option is just MIDIEndpointRef returned by MIDIGetSource or MIDIGetDestination. So what is the proper way to get ID which persists between device reconnections?

I’m developing a macOS audio monitoring app using AVAudioEngine, and I’ve run into a critical issue on macOS 26 beta where AVFoundation fails to detect any input devices, and AVAudioEngine.start() throws the familiar error 10877. FB#: FB19024508 Strange Behavior: AVAudioEngine.inputNode shows no channels or input format on bus 0. AVAudioEngine.start() fails with -10877 (AudioUnit connection error). AVCaptureDevice.DiscoverySession returns zero audio devices. Microphone permission is granted (authorized), and the app is properly signed and sandboxed with com.apple.security.device.audio-input. However, CoreAudio HAL does detect all input/output devices: Using AudioObjectGetPropertyDataSize and AudioObjectGetPropertyData with kAudioHardwarePropertyDevices, I can enumerate 14+ devices, including AirPods, USB DACs, and BlackHole. This suggests the lower-level audio stack is functional. I have tried: Resetting CoreAudio with sudo killall coreaudiod Rebuilding and re-signing the app Clearing TCC with tccutil reset Microphone Running on Apple Silicon and testing Rosetta/native detection via sysctl.proc_translated Using a fallback mechanism that logs device info from HAL and rotates logs for submission via Feedback Assistant I have submitted logs and a reproducible test case via Feedback Assitant : FB#: FB19024508]

Hi everyone 👋 I’m building an iOS app in Swift where I want to do the following: Record the user’s voice Transcribe the spoken sentence (speech-to-text) Auto-detect the spoken language Translate it to another language selected by the user (e.g., English → Spanish or Hindi → English) Speak back (text-to-speech) the translated text on the same device Is this possible to record via phone mic and play the transcribe voice into headphone's audio?

Is there any way for me to use an AutoMix api in my IOS apps, I would play tracks using the Apple Music api and use AutoMix to attempt to merge tracks. Is this feature/api available to developers.

Since MacOS 26 Apple Music has inconsitent drops to the Quality of some Tracks indiscrimantly. I don't know if others Expereinced it. It doesn't happen on the Speakers or connected via Bluetooth, but the AUX I/O has it quite often. It is more noticable on Headphones with 48kHz and higher Frequency Bandwidth. Here is the FB18062589

hi all, as soon an audio is played in a whatever app, coreaudiod inserts a sleep prevent assertion for both, the system AND the display. can i somehow stop the insertion of the display sleep assertion? pid 223(coreaudiod): [0x00004e9e00058dc2] 00:03:18 PreventUserIdleDisplaySleep named: "com.apple.audio.AppleGFXHDAEngineOutputDP:10001:0:{B31A-08C6-00000000}.context.preventuseridledisplaysleep" Created for PID: 4145. where PID 4145 is spotify. but it doesn't matter which app is playing the audio. any help would be appreciated thanks

I have an application that includes custom artwork for the album cover and text details setup with the MPRemoteCommandCenter.shared() reference. I need the user to have a full featured "now playing" display to see all of this. My experience is that cannot find a set of parameters for AVAudioSession.setCategory() that route audio successfully, and display the full featured now playing deck. If I use .playAndRecord, the audio I send out plays out on the radio. But, the now-playing deck is empty and nothing I do with the command center seems to change that. If I instead use .playback, I cannot use .defaultToSpeaker option which is the only way I've found to cause the "now-playing" navigation button to appear so that the full featured deck will display. But, of course setCategory() fails with an error about .defaultToSpeaker only available with .playAndRecord, so some default or intermediate state is entered and I see the full featured deck, but no audio goes out to the radio. What combination is supposed to be used here and is this more likely a problem with thread use (@MainActor) and/or some ordering of operations that I've overlooked?

I found that the aggregated device correctly obtains input channels in the standard microphone mode. However, in voice isolation mode, it only retrieves channels from the first sub-device in the aggregated device's list. If I want to properly obtain channel information in voice isolation mode, how should I do it?

I'm working on adding Spatial Audio support to a game on the Mac. I'm looking at the SpatialAudioRenderer sample but having some issues. It's unclear to me when a device is compatible with Spatial Audio and when I should attempt to render Spatial Audio. There is no property that I can find on the Mac that advertises Spatial Audio compatibility on a device. The sample crashes when the output device is a USB device. This includes the Apple Studio Display. The Apple Studio Display is supposed to be capable of rendering Spatial Audio. The device doesn't work with the sample - do I still need to render down the 7.1.4 source on this device? The sample always renders down to Stereo, but the Apple Studio Display is not a Stereo device. I'm a bit confused by the sample and when/how I should configure the mixing unit.

Hi, I'm trying to plan out development of an app and am wondering if it is possible to have user generated content automatically populate into a custom shazamkit catalogue and be able to query this catalogue non-locally? Storing all the submissions locally would obviously not scale.

Hello, I'm evaluating the Apple Music Feed dataset and I noticed that the total number of songs available in the feed is too small. As of today, the number of objects returned in each feed is: 51,198,712 albums 23,093,698 artists 173,235,315 songs This gives an average of 3.38 songs per album which is quite low. Also, iterating on the data I see that there are albums referencing songs that don't exist in the songs feed. I would like to know: Is the feed data incomplete? If so, in what situations an object may be missing from the feed? Thank you in advance!

Hi everyone, I’m trying to use AVAssetResourceLoaderDelegate to handle a live radio stream (e.g. Icecast/HTTP stream). My goal is to have access to the last 30 seconds of audio data during playback, so I can analyze it for specific audio patterns in near-real-time. I’ve implemented a custom resource loader that works fine for podcasts and static files, where the file size and content length are known. However, for infinite live streams, my current implementation stops receiving new loading requests after the first one is served. As a result, the playback either stalls or fails to continue. Has anyone successfully used AVAssetResourceLoaderDelegate with a continuous radio stream? Or maybe you can suggest betterapproach for buffering and analyzing live audio? Any tips, examples, or advice would be appreciated. Thanks!

Hi, I'm still stuck getting a basic record-with-playthrouh pipeline to work. Has anyone a sample of setting up a AVAudioEngine pipeline for recording with playthrough? Plkaythrough works with AVPlayerNode as input but not with any microphone input. The docs mention the "enabled state" of the outputNode of the engine without explaining the concept, i.e. how to enable an output. When the engine renders to and from an audio device, the AVAudioSession category and the availability of hardware determines whether an app performs output. Check the output node’s output format (specifically, the hardware format) for a nonzero sample rate and channel count to see if output is in an enabled state. Well, in my setup the output is NOT enabled, and any attempt to switch (e.g. audioEngine.outputNode.auAudioUnit.setDeviceID(deviceID) )/ attach a dedicated device / ... results in exceptions / errors

Hello. To determine wether "AVB/EAV Mode" of a AV-capable network interfaces is turned on or off I query the IO registry and evaluate the property "AVBControllerState". I was wondering if this is the "correct" approach and if there is anything known about the values for this property? Network interfaces without AV capability may also carry this property (e.g.: for my WiFi adapter the value of 1) whereas the value for interfaces with AV capability can be 0 and 3. At least as far as I could observe with my limited amount of test devices at hand. Is it safe to assume that a value of 3 means this feature is turned on, 0 that it is turned off and ignore values of 1? Is there another approach to get to know the status of the "AVB/EAV Mode"? Thanks for any insight. Best regards, Ingo

My workout watch app supports audio playback during exercise sessions. When users carry both Apple Watch, iPhone, and AirPods, with AirPods connected to the iPhone, I want to route audio from Apple Watch to AirPods for playback. I've implemented this functionality using the following code. try? session.setCategory(.playback, mode: .default, policy: .longFormAudio, options: []) try await session.activate() When users are playing music on iPhone and trigger my code in the watch app, Apple Watch correctly guides users to select AirPods, pauses the iPhone's music, and plays my audio. However, when playback finishes and I end the session using the code below: try session.setActive(false, options:[.notifyOthersOnDeactivation]) the iPhone doesn't automatically resume the previously interrupted music playback—it requires manual intervention. Is this expected behavior, or am I missing other important steps in my code?

I'm streaming mp3 audio data using URLSession/AudioFileStream/AVAudioConverter and getting occasional silent buffers and glitches (little bleeps and whoops as opposed to clicks). The issues are present in an offline test, so this isn't an issue of underruns. Doing some buffering on the input coming from the URLSession (URLSessionDataTask) reduces the glitches/silent buffers to rather infrequent, but they do still happen occasionally. var bufferedData = Data() func parseBytes(data: Data) { bufferedData.append(data) // XXX: this buffering reduces glitching // to rather infrequent. But why? if bufferedData.count > 32768 { bufferedData.withUnsafeBytes { (bytes: UnsafeRawBufferPointer) in guard let baseAddress = bytes.baseAddress else { return } let result = AudioFileStreamParseBytes(audioStream!, UInt32(bufferedData.count), baseAddress, []) if result != noErr { print("❌ error parsing stream: \(result)") } } bufferedData = Data() } } No errors are returned by AudioFileStream or AVAudioConverter. func handlePackets(data: Data, packetDescriptions: [AudioStreamPacketDescription]) { guard let audioConverter else { return } var maxPacketSize: UInt32 = 0 for packetDescription in packetDescriptions { maxPacketSize = max(maxPacketSize, packetDescription.mDataByteSize) if packetDescription.mDataByteSize == 0 { print("EMPTY PACKET") } if Int(packetDescription.mStartOffset) + Int(packetDescription.mDataByteSize) > data.count { print("❌ Invalid packet: offset \(packetDescription.mStartOffset) + size \(packetDescription.mDataByteSize) > data.count \(data.count)") } } let bufferIn = AVAudioCompressedBuffer(format: inFormat!, packetCapacity: AVAudioPacketCount(packetDescriptions.count), maximumPacketSize: Int(maxPacketSize)) bufferIn.byteLength = UInt32(data.count) for i in 0 ..< Int(packetDescriptions.count) { bufferIn.packetDescriptions![i] = packetDescriptions[i] } bufferIn.packetCount = AVAudioPacketCount(packetDescriptions.count) _ = data.withUnsafeBytes { ptr in memcpy(bufferIn.data, ptr.baseAddress, data.count) } if verbose { print("handlePackets: \(data.count) bytes") } // Setup input provider closure var inputProvided = false let inputBlock: AVAudioConverterInputBlock = { packetCount, statusPtr in if !inputProvided { inputProvided = true statusPtr.pointee = .haveData return bufferIn } else { statusPtr.pointee = .noDataNow return nil } } // Loop until converter runs dry or is done while true { let bufferOut = AVAudioPCMBuffer(pcmFormat: outFormat, frameCapacity: 4096)! bufferOut.frameLength = 0 var error: NSError? let status = audioConverter.convert(to: bufferOut, error: &error, withInputFrom: inputBlock) switch status { case .haveData: if verbose { print("✅ convert returned haveData: \(bufferOut.frameLength) frames") } if bufferOut.frameLength > 0 { if bufferOut.isSilent { print("(haveData) SILENT BUFFER at frame \(totalFrames), pending: \(pendingFrames), inputPackets=\(bufferIn.packetCount), outputFrames=\(bufferOut.frameLength)") } outBuffers.append(bufferOut) totalFrames += Int(bufferOut.frameLength) } case .inputRanDry: if verbose { print("🔁 convert returned inputRanDry: \(bufferOut.frameLength) frames") } if bufferOut.frameLength > 0 { if bufferOut.isSilent { print("(inputRanDry) SILENT BUFFER at frame \(totalFrames), pending: \(pendingFrames), inputPackets=\(bufferIn.packetCount), outputFrames=\(bufferOut.frameLength)") } outBuffers.append(bufferOut) totalFrames += Int(bufferOut.frameLength) } return // wait for next handlePackets case .endOfStream: if verbose { print("✅ convert returned endOfStream") } return case .error: if verbose { print("❌ convert returned error") } if let error = error { print("error converting: \(error.localizedDescription)") } return @unknown default: fatalError() } } }

I want the audio session to always use the built-in microphone. However, when using the setPreferredInput() method like in this example private func enableBuiltInMic() { // Get the shared audio session. let session = AVAudioSession.sharedInstance() // Find the built-in microphone input. guard let availableInputs = session.availableInputs, let builtInMicInput = availableInputs.first(where: { $0.portType == .builtInMic }) else { print("The device must have a built-in microphone.") return } // Make the built-in microphone input the preferred input. do { try session.setPreferredInput(builtInMicInput) } catch { print("Unable to set the built-in mic as the preferred input.") } } and calling that function once in the initializer, the audio session still switches to the external microphone once one is plugged in. The session's preferredInput is nil again at that point, even if the built-in microphone is still listed in availableInputs. So, why is the preferredInput suddenly reset? when would be the appropriate time to set the preferredInput again? Observing the session’s availableInputs did not work and setting the preferredInput again in the routeChangeNotification handler seems a bad choice as it’s already a bit too late then.

The sysEx struct in the MIDIUniversalMessage struct has a channel member but the System Exclusive (7-Bit) Message doesn't have a channel field. The System Exclusive (7-Bit) Message has a # of bytes field but the sysEx struct doesn't have a nrOfBytes, byteCount or bytesUsed member. It looks like the channel member of the sysEx struct contains the number of used bytes. Is this a mistake in the header or did I misunderstand something?

I’m seeing what appears to be an iOS audio-session issue that occurs only when a phone call happens while the app is in the background. API: AVAudioSession, AVAudioRecorder Background Modes: Audio enabled (UIBackgroundModes = audio) Category: .playAndRecord Microphone permission: granted Expected Behavior If the app is recording audio in the background and a phone call interrupts it: AVAudioSession.interruptionNotification(.began) fires Call ends AVAudioSession.interruptionNotification(.ended) fires App should be able to re-activate its audio session and resume or restart recording Apple documentation suggests this should be supported for background audio apps. Actual Behavior When the app is in the background and phone call is ended: AVAudioSession.interruptionNotification(.ended) does fire Attempting to reactivate the audio session always fails: Error Domain=NSOSStatusErrorDomain Code=560557684 ("!int") "Session activation failed" The session appears to remain permanently “interrupted” Retrying activation (with delays) does not help Recreating AVAudioRecorder does not help Reactivation works only after the app is opened again