In Reality Composer Pro 2.0 (448.120.2), if I use the "Create new scene in the project" button more than once, this feature doesn't seem to work. The second time I use "Create new scene in the project", Reality Composer Pro displays a new empty USDA file in the project browser with the wrong icon (a yellow document icon instead of a 3D box icon). Also, it doesn't create the new scene's USDA file on disk or display the scene in entity hierarchy browser or create a new tab. Consequently, whenever I want to add more than one new scene to my project, I have to repeatedly quit and restart Reality Composer Pro. In my use of RCP just now, I had to quit and restart RCP six times to create seven new scenes. Is this a known issue? Repro steps: In a Reality Composer Pro project, create a new folder using the "add folder" icon button in the project browser. Inside the new folder, click the "Create new scene in the project" icon button. Click the "Create new scene in the project" icon button a second time. Expected behavior: A new USDA file is created on disk. The new USDA file's root entity appears in the entity hierarchy browser and a corresponding new tab is created. Observed behavior: The USDA file for this scene is not created on disk and it does not appear in the entity hierarchy browser in a new tab. In the project browser view, a yellow document icon appears and it does not appear to correspond to an actual USDA file. Thank you for any insight you can provide about this issue.

Hi, I’m currently using Reality Composer Pro on macOS, and I’m trying to work with particle emitters using only the built-in tools — no Xcode, no custom Swift code. Here’s what I’m trying to achieve: 1. Is it possible to trigger a particle emitter with a tap gesture, directly inside Reality Composer Pro? 2. Can I add a particle emitter to a timeline, so that it emits at a specific time during an animation or behavior sequence? 3. Most importantly, is there a way to precisely control emission behavior — such as when particles start or stop — using visual and intuitive controls, without scripting? My goal is to set up particle effects that are interactive and timeline-controlled, but managed entirely through Reality Composer Pro’s GUI, not through code. Any suggestions, tips, or examples would be very helpful. Thanks in advance!

Hello, I'm working on a visionOS project that uses Reality Composer Pro, and we are managing our project files with Git. We've noticed that simply opening and closing the Reality Composer Pro application consistently generates changes in the following files, even when no explicit modifications have been made by the developer: {ProjectName}/Packages/RealityKitContent/Package.realitycomposerpro/PluginData/*******/ShaderGraphEditorPluginID/ShaderGraphEditorPluginID {ProjectName}/Packages/RealityKitContent/Package.realitycomposerpro/WorkspaceData/SceneMetadataList.json Could you please clarify the purpose of these files? Why do they appear as modified when no direct changes are made from our end? More importantly, is it safe to add these files to our .gitignore to prevent them from being tracked by Git? We are concerned that ignoring these files might lead to unexpected issues or inconsistencies when other team members pull the latest changes, especially if these files contain critical project metadata or state that needs to be synchronized. Any insights or recommended best practices for managing Reality Composer Pro projects with Git would be greatly appreciated. Thank you for your time and assistance.

Any way to extend the video recording time in Reality Composer Pro from 3:00 to any longer value, such as editing preferences in Terminal or other workaround? Is there any way to use the strap and a USB-C cable as a live video stream input source that would mirror to Quicktime or some other video capture tool? I am assuming there is no online documentation or user manual for the strap, but please correct me if I'm wrong. Thank you.

Hi there, I'm developing a visionOS app that is using the anchor points and mesh from SceneReconstructionProvider anchor updates. I load an ImmersiveSpace using a RealityView and apply a ShaderGraphMaterial (from a Shader Graph in Reality Composer Pro) to the mesh and use calls to setParameter to dynamically update the material on very rapid frequency. The mesh is locked (no more updates) before the calls to setParameter. This process works for a few minutes but then eventually I get the following error in the console: assertion failure: Index out of range (operator[]:line 789) index = 13662, max = 1 With the following stack trace: Thread 1 Queue : com.apple.main-thread (serial) #0 0x00000002880f90d0 in __abort_with_payload () #1 0x000000028812a6dc in abort_with_payload_wrapper_internal () #2 0x000000028812a710 in abort_with_payload () #3 0x0000000288003f40 in _os_crash_msg () #4 0x00000001dc9ff624 in re::ecs2::ComponentBucketsBase::addComponent () #5 0x00000001dc9ffadc in re::ecs2::ComponentBucketsBase::moveComponent () #6 0x00000001dc8b0278 in re::ecs2::MaterialParameterBlockArrayComponentStateImpl::processPreparingComponents () #7 0x00000001dc8b05e4 in re::ecs2::MaterialParameterBlockArraySystem::update () #8 0x00000001dd008744 in re::Scheduler::executePhase () #9 0x00000001dc032ec4 in re::Engine::executePhase () #10 0x0000000248121898 in RCPSharedSimulationExecuteUpdate () #11 0x00000002264e488c in __59-[MRUISharedSimulation _doJoinWithConnectionContext:error:]_block_invoke.44 () #12 0x0000000268c5fe9c in _UIUpdateSequenceRunNext () #13 0x00000002696ea540 in schedulerStepScheduledMainSectionContinue () #14 0x000000026af8d284 in UC::DriverCore::continueProcessing () #15 0x00000001a1bd4e6c in CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION () #16 0x00000001a1bd4db0 in __CFRunLoopDoSource0 () #17 0x00000001a1bd44f0 in __CFRunLoopDoSources0 () #18 0x00000001a1bd3640 in __CFRunLoopRun () #19 0x00000001a1bce284 in _CFRunLoopRunSpecificWithOptions () #20 0x00000001eff12d2c in GSEventRunModal () #21 0x00000002697de878 in -[UIApplication _run] () #22 0x00000002697e33c0 in UIApplicationMain () #23 0x00000001b56651e4 in closure #1 (Swift.UnsafeMutablePointer<Swift.Optional<Swift.UnsafeMutablePointer<Swift.Int8>>>) -> Swift.Never in SwiftUI.KitRendererCommon(Swift.AnyObject.Type) -> Swift.Never () #24 0x00000001b5664f08 in SwiftUI.runApp<τ_0_0 where τ_0_0: SwiftUI.App>(τ_0_0) -> Swift.Never () #25 0x00000001b53ad570 in static SwiftUI.App.main() -> () () #26 0x0000000101bc7b9c in static MetalRendererApp.$main() () #27 0x0000000101bc7bdc in main () #28 0x0000000197fd0284 in start () Any advice on how to solve this or prevent the error? Thanks!

That title would have made a great WWDC Sessions. Unfortunately, it seems like nothing is new in Reality Composer Pro this year. I've noticed at all versions of the Xcode Beta this summer have shipped with Reality Composer Pro version 2.0. There have been slight bumps in the build number. I haven't found any new features or seen any documentation to indicate that anything has changed. So the question is, what is the state of Reality Composer Pro? Should we continue to use this tool or start doing everything in code? A huge number of Sample Projects use Reality Composer Pro, so it seems like Apple is still using it even if they didn't update it this year.

I developed an app on VisionPro and created a button that allows users to exit the app instead of being forced to exit. I use the ”exit (0)“ scheme to exit the application, but when I re-enter, the loaded window is not the initial window, so is there any relevant code that can be used? Thank you

Is there any way to convert TextureResource to Image

是对原本VisionPro每个App的内存限制做了扩展嘛？放宽了内存限制么？

After writing the code, when debugging on VisionPro, the program will encounter a blocking situation when running from Xcode to VisionPro. It will take a long time for the execution information to appear on the Xcode console

I have a question about Apple’s preinstalled visionOS app “Encounter Dinosaurs.” In this app, the dinosaurs are displayed over the real-world background, but the PhysicallyBasedMaterial (PBM) in RealityKit doesn’t appear to respond to the actual brightness of the environment. Even when I change the lighting in the room, the dinosaurs’ brightness and shading remain almost the same. If this behavior is intentional — for example, if the app disables real-world lighting influence or uses a fixed lighting setup — could someone explain how and why it’s implemented that way?

I’m currently developing a visionOS app that includes an RCP scene with a large USDZ file (around 2GB). Each time I make adjustments to the CG model in Blender, I export it as USDZ again, place it in the RCP scene, and then build the app using Xcode. However, because the USDZ file is quite large, the build process takes a long time, significantly slowing down my development speed. For example, I’d like to know if there are any effective ways to: Improve overall build performance Reduce the time between updating the USDZ file and completing the build Any advice or best practices for optimizing this workflow would be greatly appreciated. Best regards, Sadao

Hello! Back from last week's amazing visit to Cupertino for the Game Dev session and diving back into Vision Pro experimentation. I've exported a simple geometry nodes with animation test from Blender for use in RCP, with intended output to Vision Pro. I've attached a few screenshots showing the node setup and how it animates over time. I select the Cube mesh and export as .usdc with animation. In the finder via quick look, I can actually see it working! If I try exporting as .usdz, however, i'm not seeing any animation in the finder preview. Next, I import the .usdc file to RCP and add an Animation Library component to the cube mesh, but am not seeing any animation selectable, even though I see animation playing back in preview. Next, I import the .usdc into Maya (via proper USD Stage pipeline - i'm learning to be USD compliant for authoring!) to verify if the animation is working, and it does. What step(s) am I missing to get this working in Reality Composer Pro? My goal is to experiment with animating these geometry node instances - along with color animation if possible - over to Vision Pro for full scale, immersive presentation. Of particular note, I am not a programmer, so I am trying my best to brute force this the only way I currently know possible, by keyframe animation and importing through Reality Composer Pro. I realize that, ideally, I should be learning how to leverage the code portion so I can start programatically controlling my 3d entities (with animation), but need more hand holding and real-world examples to help me get there. Thx!

I am creating an Augmented Reality iOS (Not VisionOS) app using scenes created in Reality Composer Pro. I'd like my code to send a notification to a RCP scene that plays a timeline. The RCP interface has the option to set up a behaviour for this purpose: This Forum thread https://developer.apple.com/forums/thread/756978 suggests the code I need for sending a notification is: name: NSNotification.Name("RealityKit.NotificationTrigger"), object: nil, userInfo: [ "RealityKit.NotificationTrigger.Scene": scene, "RealityKit.NotificationTrigger.Identifier": "HideCharacter" ] ) but the 'scene' var needs to point to the relevant RCP scene, which is loaded within a UIViewRepresentable ARView (because even in iOS26 it seems RealityKit/RealityViews aren't quite ready for AR use) and I can't work out how to correctly access it. Examples in the link above are for working with RealityKit and VisionOS only. Code for loading the scene is as follows. How can I get the notification code above to be situated in a separate SwiftUI View and send the notification to the RCP scene? typealias UIViewType = ARView func makeUIView(context: Context) -> ARView { // Create an ARView let arView = ARView(frame: .zero) // Configure it let arConfiguration = ARWorldTrackingConfiguration() arConfiguration.planeDetection = [.horizontal] arView.session.run(arConfiguration) // Load in Reality Composer Pro scene let scene = try! Entity.load(named:"myScene)", in: realityKitContentBundle) // Create a horizontal plane anchor let anchor = AnchorEntity(.plane(.horizontal, classification: .any, minimumBounds: SIMD2<Float>(0.2, 0.2))) // Append the scene to the anchor anchor.children.append(scene) // Append the anchor to the ARView arView.scene.anchors.append(anchor) return arView } func updateUIView(_ uiView: ARView, context: Context) { } }

A ShaderGraphMaterial with an Occlusion Surface Output generated with RealityComposer 2 fails to load on iOS 18 and macOS 15 with the following error: RealityFoundation.ShaderGraphMaterial.LoadError.invalidTypeFound (https://developer.apple.com/documentation/realitykit/shadergraphmaterial/loaderror/invalidtypefound) This happens with both https://developer.apple.com/documentation/shadergraph/realitykit/occlusion-surface-(realitykit) and https://developer.apple.com/documentation/shadergraph/realitykit/shadow-receiving-occlusion-surface-(realitykit) RealityView { content in do { let bgEntity = ModelEntity(mesh: .generateCone(height: 0.5, radius: 0.1), materials: [SimpleMaterial(color: .red, isMetallic: true)]) bgEntity.position.z = -0.2 content.add(bgEntity) let occlusionMaterial = try await ShaderGraphMaterial(named: "/Root/OcclusionMaterial", from: "OcclusionMaterial") let testEntity = ModelEntity(mesh: .generateSphere(radius: 0.4), materials: [occlusionMaterial]) content.add(testEntity) content.cameraTarget = testEntity } catch { print("Shader Graph Load Error:") dump(error) } } .realityViewCameraControls(.orbit) .edgesIgnoringSafeArea(.all) Feedback ID: FB15081296

What is recommended best practice for importing a Blender 3D file into RCP? I assume as a .usdz file? Is there a WWDC24 session or other Apple resource that best explains this. I want to make sure I provide the right format/file to RCP from Blender.

Hi Apple engineers, I'm currently working on an app that uses the incoming microphone audio and gives visual feedback to the user about the incoming audio. I would like to use Reality Composer Pro's Developer Capture to get a high quality recording of the app and its use cases for the App Store — but any time I have an in-progress capture, my app stops receiving the incoming audio. It almost seems as if the microphone audio is getting 'hijacked' during the screen capture, which prevents me from demonstrating the app's core features. Could you please advise on how to proceed?

Hi I try to make a 360 stereo viewer, and I have made a ShaderGraphMaterial on Reality Composer Pro. Im trying to use that material on a inverted sphere whitch is generated in Swift. When I try to attach the material I get this error "Type of expression is ambiguous without a type annotation" Here is the code (sorry im noob =) ): import SwiftUI import RealityKit import RealityKitContent import PhotosUI struct ImmersiveView: View { @Environment(AppModel.self) var appModel var body: some View { RealityView { content in // Add the initial RealityKit content guard let skyBoxEntity = await createSkybox() else { return } content.add(skyBoxEntity) } } } private func createSkybox () async -> Entity? { var matX = try? await ShaderGraphMaterial(named: "/Root/Mat_Stereo360", from: "360Stereo.usda", in: realityKitContentBundle) let sphere = await MeshResource.generateSphere(radius:1000) let entity = await Entity() entity.components.set(ModelComponent(mesh: sphere, materials: [matX])). //ERROR HERE: Type of expression is ambiguous without a type annotation //entity.scale *= .init(x:-1, y:1, z:1) return entity } I hope someone can help me =) Best regards, Kim

Hey everyone, I'm working on an object viewer where users can place objects in a real room using AR, and I want both visionOS (Apple Vision Pro) and iOS devices (iPad, iPhone) to participate in the same shared spatial experience. The idea is that a user with a Vision Pro can place an object, and peers using iPhones/iPads can see the same object in the same position in their AR view. I've looked into ARKit's Shared ARWorldMap and MultipeerConnectivity, but I'm not sure if this extends seamlessly to visionOS or if Apple has an official way to sync spatial data between visionOS and iOS devices. Has anyone tried sharing a spatial world between visionOS and iOS? Are there any built-in frameworks that allow for a shared multiuser AR session across these devices? If not, what would be the best way to sync object positions between them? Would love to hear if anyone has insights or experience with this! 🚀 Thanks!

We have a project which is currently being built as a XCFramework. The framework contains a custom component to be used with entities in Reality Composer Pro. I have tried to se set the RCP Package.swift file to reference the framework package for the in the dependancies. Nothing that I do with the folder path to reference the code is working. Do I need to change the project to be using Swift source code instead of a XCFramework? The component needs to be in the framework as there is a class in the framework that works directly with the custom compoent. I am able to reference the XCFramework as a Swift Package with other projects.