We are using Apple's PSSO to federate device login to out own IdP. We have developed our own extension app and deployed it using MDM. Things works fine but there are 2 issues that we are trying to get to the root cause - On some devices after restarting we see an error message on the logic screen saying "The registration for this device is invalid and must be repaired" And other error message is "SmartCard configuration is invalid for this account" For the 1st we have figured out that this happens when the registration doesn't happen fully and the key is not tied to the user so when the disk needs to be decrypted at the FileVault screen the issue is raised. For the "SmartCard configuration is invalid for this account" issue also one aspect is invalid registration but there has been other instances as well where the devices were registered completely but then also the the above error was raised. We verified the registration being completed by checking if the SmartCard is visible in the System Report containing the key. Has anyone seen the above issues and any possible resolution around it?

We are facing an issue with Platform SSO registration on macOS devices for AD-bound user accounts with Microsoft EntraID configuration. We are using the Platform SSO payload on macOS devices integrated with Entra ID, and it works as expected — registration completes successfully, and the password syncs with the Entra ID password. However, when we try the same on macOS devices with AD-bound (mobile) user accounts, the registration does not complete. To elaborate, the process successfully completes the initial WebView authentication but fails at the stage where Apple prompts for the password to sync the local macOS user’s password with the Entra ID password. It does not display any error, and even after entering a valid password, the process does not proceed further. However, when we try the same on a non-AD user account, it works fine. We have checked with Microsoft, and they confirmed that there are no restrictions on their side for AD-bound accounts. Since the issue appears to occur at the Apple system level, they advised us to reach Apple teams on this. Could you please check and let us know how we can proceed with this? Payload used: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadContent</key> <array> <dict> <key>AuthenticationMethod</key> <string>Password</string> <key>ExtensionIdentifier</key> <string>com.microsoft.CompanyPortalMac.ssoextension</string> <key>PayloadDisplayName</key> <string>Extensible Single Sign-On Payload</string> <key>PayloadIdentifier</key> <string>com.apple.extensiblesso.B408A658-3DAF-41FF-8A5D-AE77B380CB7B</string> <key>PayloadType</key> <string>com.apple.extensiblesso</string> <key>PayloadUUID</key> <string>D506CAFD-C802-41F2-9C3E-DF5289C315FF</string> <key>PayloadVersion</key> <integer>1</integer> <key>PlatformSSO</key> <dict> <key>AccountDisplayName</key> <string>EntraID</string> <key>AuthenticationMethod</key> <string>Password</string> <key>EnableCreateUserAtLogin</key> <true/> <key>LoginFrequency</key> <integer>3700</integer> <key>LoginPolicy</key> <array> <string>AttemptAuthentication</string> </array> <key>NewUserAuthorizationMode</key> <string>Admin</string> <key>UseSharedDeviceKeys</key> <true/> <key>UserAuthorizationMode</key> <string>Admin</string> </dict> <key>ScreenLockedBehavior</key> <string>DoNotHandle</string> <key>TeamIdentifier</key> <string>UBF8T346G9</string> <key>Type</key> <string>Redirect</string> <key>URLs</key> <array> <string>https://login.microsoftonline.com</string> <string>https://sts.windows.net</string> <string>https://login.partner.microsoftonline.cn</string> <string>https://login.chinacloudapi.cn</string> <string>https://login.microsoftonline.us</string> <string>https://login.microsoft.com</string> <string>https://login-us.microsoftonline.com</string> </array> </dict> </array> <key>PayloadDisplayName</key> <string>Platform SSO</string> <key>PayloadIdentifier</key> <string>42GBHOLAP04621.1BD5B6D9-640B-4DC3-9275-56DDD191A5FB</string> <key>PayloadType</key> <string>Configuration</string> <key>PayloadUUID</key> <string>58548FC6-38D9-4B28-9EDF-BEEAB03BAB23</string> <key>PayloadVersion</key> <integer>1</integer> </dict> </plist>

We have couple of devices that are registered into Platform SSO, and we have been noticing an issue when the user tried to login. After the users enters the password and hit the return key nothing happens, they need to hit the return key probably 10-15 times in order for the login to happen, the password entered is the correct one and it's just that hitting the return key doesn't invoke the login. On checking the log of the device one unusual thing that we noticed as compared to a different device where the login is working in a single go is that the AppSSOAgent or AppSSODaemon process were not getting invoked

Dear Team, We are working on retrieving email address of the user joined to Entra ID from Entra-joined macOS devices, specifically while running in a system context.The sudo dscl . -read /Users/$(whoami) RecordName command give the local user name whose password is synced with the entra ID. We would greatly appreciate guidance on how to retrieve the Entra ID joined user’s email address in a system context from Entra Joined mac devices, especially from those with prior experience in this area. Thank you for your support.

Is there a way (in code or on the OAuth2 server/webpage) to specify the desired window size when using ASWebAuthenticationSession on macOS? I haven't found anything, and we would prefer the window to be narrower. For one of our users, the window is even stretched to the full screen width which looks completely broken…

Hi Apple Team & Community, The new Introduction of Platform SSO during ADE Enrollment is Great And we tried implementing this. As a Rule mentioned in the Documentation Initially MDM Server should send 403 response with Response Body adhering to ErrorCodePlatformSSORequired when HTTP Header for MachineInfo request contains MDM_CAN_REQUEST_PSSO_CONFIG and set to true There are contradictory claims mentioned in Document, In Process Platform SSO Required Response it is mentioned that MDM Server should send body as JSON Object for ErrorCodePlatformSSORequired Example below >>>>> Response HTTP/1.1 403 Forbidden Content-Type: application/json Content-Length: 558 { "code": "com.apple.psso.required", "description": "MDM Server requires the user to authenticate with Identity Provider - BY MEMDM", "message": "The MDM server requires you to authenticate with your Identity Provider. Please follow the instructions provided by your organization to complete the authentication process - BY MEMDM", "details": { "Package": { "ManifestURL": "https://platform-sso-node-server.vercel.app:443/manifest" }, "ProfileURL": "https://platform-sso-node-server.vercel.app:443/profile", "AuthURL": "https://platform-sso-node-server.vercel.app:443/auth" } } But in the same Document a Sample HTTP Response was Provided but seems to be XML format as below >>>>> Response HTTP/1.1 403 Forbidden Content-Type: application/xml Content-Length: 601 <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Code</key> <string>com.apple.psso.required</string> <key>Details</key> <dict> <key>ProfileURL</key> <string>https://mdmserver.example.com/psso.mobileconfig</string> <key>Package</key> <dict> <key>ManifestURL</key> <string>https://mdmserver.example.com/psso-app.plist</string> </dict> <key>AuthURL</key> <string>https://idp.example.com/authenticate</string> </dict> </dict> </plist> From Github I assume that both Response Types are welcomed hence I tried with Both Followed in JSON Mode, I redirected the HTTP request if MachineInfo contains MDM_CAN_REQUEST_PSSO_CONFIG and set to true to https://platform-sso-node-server.vercel.app/redirectedDEPJSON Followed in XML Mode, I redirected the HTTP request if MachineInfo contains MDM_CAN_REQUEST_PSSO_CONFIG and set to true to https://platform-sso-node-server.vercel.app/redirectedDEPXML In both Response Modes OS is not proceeding after and a error Stating Enrollment with Management Server Failed , Forbidden request (403) appears Can someone kindly guide on where I missed, or is this any OS Bug in Tahoe 26?

Wondering if others have encountered this issue with PSSO 2.0. We are observing that if, after registration, a user changes their IDP password, they may be prompted for their previous password in order to unlock the Keychain. We are trying to determine if this is expected behavior or if there is a way to avoid it. To reproduce this, the flow would be as follows: user registers with PSSO user logs out and logs back in with their IDP password user is authenticated (and not prompted for previous password) user logs out user changes their IDP password on another machine user logs in and is prompted to use their previous password to unlock the Keychain. Failure to provide the previous password nukes the Keychain, which is not an outcome we want. Any insight anyone has on this issue would be most welcome. Thanks