I have the our device connected , with Assistive Touch enabled and the application running in the foreground. At this point, I place the screen on standby and leave the device unattended for 10 minutes. After this period, I return, unlock the screen, and observe that our app is still running, and the connection with the device is re-initiated. However, something occurs at this stage that causes the application to briefly switch to the background and then immediately return to the foreground. This behavior leads to system instability. Ideally, once the application is running in the foreground, it should not transition to the background automatically. However, it seems to be doing so for a short duration—momentarily switching from the foreground to the background, then back to the foreground—which is causing the observed instability. OK, the iPad screen is unlocked AND App Appears. 2024-10-01 13:15:55 LOG: APP > Scene did become active 2024-10-01 13:15:55 LOG: APP > Init device Suddenly the application goes to background by itself?!?!?! 2024-10-01 13:15:55 LOG: APP > Scene will change from Foreground to Background 2024-10-01 13:15:55 LOG: APP > Scene changed to Background 2024-10-01 13:15:56 LOG: APP > Scene Will Enter to Foreground 2024-10-01 13:15:56 LOG: APP > Nib Name previous load : Home Other example OK, the iPad screen is unlocked AND App Appears. 2024-10-01 11:23:55 LOG: APP > Scene Will Enter to Foreground 2024-10-01 11:23:56 LOG: APP > Scene did become active 2024-10-01 11:23:56 LOG: APP > Init connection Suddenly the application goes to background by itself?!?!?! 2024-10-01 11:23:56 LOG: APP > Scene will change from Foreground to Background 2024-10-01 11:23:56 LOG: APP > Scene changed to Background 2024-10-01 11:23:56 LOG: APP > Scene Will Enter to Foreground 2024-10-01 11:23:56 LOG: APP > Scene did become active 2024-10-01 11:23:56 LOG: APP > Scene will change from Foreground to Background 2024-10-01 11:23:56 LOG: APP > Scene changed to Background 2024-10-01 11:23:56 LOG: APP > Scene Will Enter to Foreground 2024-10-01 11:23:56 LOG: APP > Nib Name previous load : Home FA FB15345245 this is happening under iPadOS18.1 beta5 and iPad12.9" 6th gen. Would you mind taking a look at this issue ?

Is it mandatory to use classic Bluetooth (Bluetooth Classic) to connect game controllers that support Apple’s MFi games and Arcade games, or can game controllers be developed using only Bluetooth Low Energy (BLE) for such accessories?

I am working on an app for a Home automation device built on Matter. There are both standard and custom features/services/clusters on this device. HomeKit seems to pick up the standard ones except for one (leak detector) that is part of the Matter 1.3 spec. Of course HomeKit doesn't know what to do with the custom ones so they aren't shown in the Home app. I am trying to access those directly via calls to the Matter APIs so I can present them in a custom app. To access Matter APIs I am using a process suggested by DTS in a forum post that can be found here. The MTRBaseDevice I obtain in the suggested way responds appropriately to read and write commands, but subscribe doesn't work as expected. It returns an error code 48 which is described as "The operation couldn’t be completed." and the source that contains the error calls it "operationNotSupported". This is the subscribe call referenced in the DTS response to earlier post, however there are three more "subscribe" methods and I have tried them all. Two also return an error 48, and the last one never calls any of the callback handlers providing no data or errors. Since a subscription is supposed to return data periodically even when there have been no changes it doesn't seem that different than polling so I have written code for that and it works. However I don't expect iOS will let me poll in the background for alarm conditions and I am hoping subscription updates will be sent to a background app so it can notify users of these conditions. Is that a reasonable assumption? Here is the code I am using to test subscribe, perhaps I am doing something wrong? Originally I had shorter intervals but changing them made no difference. Do they need to be longer? let subscribeParams = MTRSubscribeParams(minInterval: 15, maxInterval: 900) if #available(iOS 17.6, *) { subscribeParams.shouldAssumeUnknownAttributesReportable = true } subscribeParams.shouldFilterByFabric = false subscribeParams.shouldReplaceExistingSubscriptions = true subscribeParams.shouldReportEventsUrgently = true subscribeParams.shouldResubscribeAutomatically = false print("Attempting subscribe:with") let localClusterStateCache = MTRClusterStateCacheContainer() matterBaseDevice.subscribe(with: OS_dispatch_queue_global.global(), params: subscribeParams, clusterStateCacheContainer: localClusterStateCache) { (attributes: [Any]) in print("subscribe:with attributeHandler: \(attributes)") } eventReportHandler: { (events: [Any]) in print("subscribe:with eventHandler: \(events)") } errorHandler: { (error: any Error) in let reportingError = error as NSError if reportingError.domain == "HMErrorDomain" { let hkError = HMError(HMError.Code(rawValue: reportingError.code)!) print("subscribe:with errorHandler: \(hkError.localizedDescription); UserInfo: \(hkError.userInfo); ErrorUserInfo: \(hkError.errorUserInfo)") } else { print("subscribe:with errorHandler: \(reportingError)") } } subscriptionEstablished: { print("subscribe:with Subscription established!!!") } resubscriptionScheduled: { (error: any Error, numericParam: NSNumber) in print("subscribe:with Resubscription scheduled; error: \(error); numericParam: \(numericParam)") }

I am using NFC when the phone is near the NFC reader times below the error： 2024-07-15 15:43:03.608427+0800 TestNFC[16022:1038141] [xpc.exceptions] <NSXPCConnection: 0x282ba90e0> connection to service with pid 58 named com.apple.nfcd.service.corenfc: Exception caught during decoding of received selector didDetectExternalReaderWithNotification:, dropping incoming message. Exception: Exception while decoding argument 0 (#2 of invocation): Exception: decodeObjectForKey: class "NFFieldNotification" not loaded or does not exist my code: #import <CoreNFC/CoreNFC.h> @interface ViewController ()<NFCTagReaderSessionDelegate> @property (strong, nonatomic) NFCTagReaderSession *session; @end @implementation ViewController - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view. self.view.backgroundColor = [UIColor whiteColor]; if (@available(iOS 13.0, *)) { // 初始化 NFC 设置代理 NFCTagReaderSessionDelegate if (NFCNDEFReaderSession.readingAvailable) { self.session = [[NFCTagReaderSession alloc] initWithPollingOption:NFCPollingISO14443 delegate:self queue:nil]; // NFC 显示提示信息 self.session.alertMessage = @"准备扫描，请将卡片贴近手机"; // 开启 NFC [self.session beginSession]; } } else { } } #pragma mark - NFCNDEFReaderSessionDelegate //读取失败回调-读取成功后还是会回调这个方法 - (void)tagReaderSessionDidBecomeActive:(NFCTagReaderSession *)session API_AVAILABLE(ios(13.0)){ NSLog(@"tagReaderSessionDidBecomeActive"); } - (void)tagReaderSession:(NFCTagReaderSession *)session didInvalidateWithError:(NSError *)error API_AVAILABLE(ios(13.0)){ NSLog(@"readerSession:didInvalidateWithError: (%@)", [error localizedDescription]); } - (void)tagReaderSession:(NFCTagReaderSession *)session didDetectTags:(NSArray<__kindof id<NFCTag>> *)tags API_AVAILABLE(ios(13.0)){ }

Since 17.4 Dev Beta 2, I have been having Bluetooth issues. I had hoped it would have cleared up but even in 17.4.1 it continues. Airpod and Echo Auto are the only 2 audio devices I have. The audio will become chopping, rubber band or sound robotic and sometime completely disconnect. While driving it will occur on both audio devices. Sometimes I'm stopped at red light and the issue occurs. The phone is less than 3 feet from the device at all times. I have read forums and removed and readded the devices but that did not help. I really do not want to have to reset my phone since my 2FA apps do not recover in a restore. Anyone have any suggestions?

Will UVC native support come for the Iphone as well? So, using external cameras with the ipad is greatly beneficial, but for the iphone, it can make it a production powerhouse! So, have there been discussions around bringing UVC support for the Iphone as well? and if so, what were your conclusions?

This is a regression since iOS 13. Is there no-one at Apple interested in fixing this? FB9856371

I am creating a barcode reader using the AVfoundation framework for iOS and IPadOS. The read result goes into payloadstringvalue, but I want to check the control characters contained in the symbol, so I am using the raw data of the description, which is a property of NSObjectProtocol inherited by VNBarcodeObservation. However, I noticed that if the length set in the raw data exceeds 26, some of the raw data in the description is omitted. So my question is, is it possible to set it so that all the raw data in the description is written out without omitting any raw data? If so, could you please tell me how to set this up? Also, if you know of any other way to extract the raw barcode data, I would appreciate it if you could let me know. Thank you.

Hello! I'm facing the following Appstore issue. There was an watchOS only app, without a companion app. In current 1.6 version the app has a companion app and it can be properly installed by new users from their iPhones or watches. Unfortunately, all old users, who have installed the app from their watches don't see a way to install the app from the Appstore (they can download the latest watchOS version though). Many things have been tried - uninstalling, installing on the watch. Looking for a purchase, removing subscription, but without luck. The Appstore shows "purchased" button instead "Get" or the cloud icon. Is this a bug in the Appstore or there is a way to recover from this edge case. Thanks, Emil

Hello I've noticed that this product, heavily promoted on the ASC forums for many years, is no longer available from the Apple App Store. Can anyone tell me the reason why the product is no longer supported? Friends have asked me if it is 'safe' to use. Is it? Note to moderator: If I'm asking in the wrong places, please redirect my question. Thank you.