In Low Power Mode or after the iPhone has been idle, On-Demand rules fire and StartTunnel runs. Subsequent calls to createTCPConnectionThroughTunnel intermittently fail with an error. Is NetworkExtension known to behave differently under Low Power Mode that might cause this?

But the NMI and NDI of Samsung's Wi Fi Aware are not the same MAC address. May I ask Apple engineers why they are different from Samsung？

我的完整报错信息： Task <0568A3A0-A40C-42A8-9491-2FC52D71EFFF>.<4> finished with error [-1009] Error Domain=NSURLErrorDomain Code=-1009 "似乎已断开与互联网的连接。" UserInfo={_kCFStreamErrorCodeKey=50, NSUnderlyingError=0x107db5590 {Error Domain=kCFErrorDomainCFNetwork Code=-1009 "(null)" UserInfo={_kCFStreamErrorDomainKey=1, _kCFStreamErrorCodeKey=50, _NSURLErrorNWResolutionReportKey=Resolved 0 endpoints in 1ms using unknown from cache, _NSURLErrorNWPathKey=unsatisfied (Denied over Wi-Fi interface), interface: en0[802.11], ipv4, dns, uses wifi}}, _NSURLErrorFailingURLSessionTaskErrorKey=LocalDataTask <0568A3A0-A40C-42A8-9491-2FC52D71EFFF>.<4>, _NSURLErrorRelatedURLSessionTaskErrorKey=( "LocalDataTask <0568A3A0-A40C-42A8-9491-2FC52D71EFFF>.<4>" ), NSLocalizedDescription=似乎已断开与互联网的连接。, NSErrorFailingURLStringKey=https://sharkserver.dypc.top/shark_user/login, NSErrorFailingURLKey=https://sharkserver.dypc.top/shark_user/login, _kCFStreamErrorDomainKey=1} 请求失败：似乎已断开与互联网的连接。 以下是问题的具体描述 我的A手机（15pro max 版本18,6,1） 使用xcode直接在A手机上运行我的程序 尝试发起post请求的时候得到了该报错。 我做了以下尝试 1.检查了A手机网络，一切正常，浏览器和其他app均可正常访问网络 2.检查了A手机上我的app权限，确认我因为为我的程序打开了无线网络和蜂窝流量 3.重启A手机，还原A手机网络设置，还原A手机所有设置，重启mac电脑 以上做法均无效，依旧报上面的错误 4.然后我尝试使用B手机(iPhone13 版本18.5)安装该程序 ，B手机可以正常运行并成功发起post请求，证明我的代码没有问题 5.我将代码上传至testfight 然后使用A手机下载testfight里的该程序 ，程序可以成功发起post请求没有任何错误，我再次使用xcode运行该程序到真机，又得到了Code=-1009错误 无法发起post请求

Our goal is to establish a Wi‑Fi Aware data path (NDP) between Apple and Android devices. Apple will act as the Publisher, and Android will act as the Subscriber. Apple-to-Android pairing has already been completed. The Android device can be normally displayed on the Apple official Wi-Fi Aware Sample. However, the indicator is not green. During pairing, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingSetupSucceeded. During pairing verification, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingVerificationSucceed. The Android side sends an NDP request to Apple (as shown in the figure 1), but Apple does not reply. Note: Qualcomm’s NDI and NMI are different. In addition, after Apple-to-Apple pairing is completed, the paired device will be recorded in “Settings → Privacy & Security → Paired Devices”. However, after Android-to-Apple pairing is completed, the device is not saved to this list. My iPhone model: iPhone 13, iOS 26.0 (23A5287g).

After Apple-to-Apple pairing is completed, the paired device will be recorded in “Settings → Privacy & Security → Paired Devices”. However, after Android-to-Apple pairing is completed, the device is not saved to this list. Android device can be normally displayed on the Apple official Wi-Fi Aware Sample. However, the indicator is not green. During pairing, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingSetupSucceeded. During pairing verification, the Apple log shows: state: authenticated, and the Android side triggers the callback onPairingVerificationSucceed. My iPhone is iPhone 13， iOS 26.0 （23A5287g）

I cannot find in the documentation and samples how exactly the Bloom filter is generated. Is there any code sample for that?

Apple is encouraging VPN apps on macOS to transition to Network Extension APIs, if they haven't done so yet, see: TN3165: Packet Filter is not API WWDC25: Filter and tunnel network traffic with NetworkExtension Using Network Extension is fine for VPN apps that are distributed via the Mac App Store. Users get one pop-up requesting permission to add VPN configurations and that's it. However, VPN apps that are distributed outside of the App Store (using Developer ID) cannot use Network Extension in the same way, such apps need to install a System Extension first (see TN3134: Network Extension provider deployment). Installing a System Extension is a very poor user experience. There is a pop-up informing about a system extension, which the user has to manually enable. The main button is "OK", which only dismisses the pop-up and in such case there is little chance that the user will be able to find the correct place to enable the extension. The other button in that pop-up navigates to the correct screen in System Settings, where the user has to enable a toggle. Then there is a password prompt. Then the user has to close the System Settings and return to the app. This whole dance is not necessary for VPN apps on the Mac App Store, because they work with "app extensions" rather than "system extensions". As a developer of a VPN app that is distributed outside of the App Store, my options are: Implement VPN functionality in an alternative way, without Network Extension. This is discouraged by Apple. Use a System Extension with Network Extension. This is going to discourage my users. I have submitted feedback to Apple: FB19631390. But I wonder, why did Apple create this difference in the first place? Is there a chance that they will either improve the System Extension installation process or even allow "app extensions" outside of the Mac App Store?

I filed FB19631435 about this just now. Basically: starting with 15.6, we've had reports (internally and outternally) that after some period of time, networking fails so badly that it can't even acquire a DHCP lease, and the system needs to be rebooted to fix this. The systems in question all have at least 2 VPN applications installed; ours is a transparent proxy provider, and the affected system also had Crowdstrike's Falcon installed. A customer system reported seemingly identical failures on their systems; they don't have Crowdstrike, but they do have Cyberhaven's. Has anyone else seen somethng like this? Since it seems to involve three different networking extensions, I'm assuming it's due to an interaction between them, not a bug in any individual one. But what do I know? 😄

This is a major issue. After my iPhone 12 Pro was upgraded to iOS 26 beta 6, Apple's official Wi-Fi Aware Sample APP crashed immediately and couldn't be opened. It just force closes. Has any developer encountered this problem?

Hello there, I am trying to add Nearby Interaction into my project, but it is not appear into +capabilities. I have already go to my account into developer account platform to try to add it from Identifiers: Then I search into my project to activated, but Nearby Interaction was not show: So, there is anything else that i have miss? please help :c

Hello, I am new to App development, so I am looking for some advice. I want to develop an app for iPhone, which downloads files (pdf, jpg)from a server to the local storage. I also want to get data from the server to be used in my app. This could be a database access or just simple xml files. I want a secure access based on userid and password. Since in a later version, my app should also run on Android Phones, I am reluctant to use iCloud. I was thinking sftp, but that does not seem to be supported for iOS.

We have an application which is written in Swift, which activates Transparent Proxy network extension. Our Transparent Proxy module is a system extension, which is exposing an app proxy provider interface (We are using NETransparentProxyProvider class and in extension’s Info.plist we use com.apple.networkextension.app-proxy key.) We are using JAMF MDM profile for installing our transparent proxy in customer environment. We are using VPN payload(https://developer.apple.com/documentation/devicemanagement/vpn) for this network system extension. This payload does not have any field for order. As per https://developer.apple.com/documentation/devicemanagement/vpn/transparentproxy-data.dictionary documentation there is another payload for TransparentProxy and we could create a Transparent Proxy profile using iMazingProfile Editor. Noticed that, if we add the Order attribute to the VPN/TransparentProxy payload, while installing the extension, the save to preferences fails with "Error in saving TP configuration in updateOnDemandRule permission denied" error. Can we use this Order field to ordering the installed Transparent Proxy extension in a machine? Customer devices will likely have other Transparent Proxy network extensions as well. We want to allow the Customer to control the order in which each Transparent Proxy network extension receives the network traffic. How can we set the order of the Transparent proxy extension that can be deployed using MDM profile with VPN/TransparentProxy payload? Attached the TransparentProxy payload profile for the reference. DGWebProxy_TransparentProxy_iMazing

Hello, I am currently investigating if we can disable usage of QUIC on application level. I know we can set enable_quic from /Library/Preferences/com.apple.networkd.plist to false but it will have a global impact since this is a system file, all the applications on machine will stop using QUIC. I don't want that. What i am looking for is to disable QUIC only for my application. Is there any way i can modify URLSession object in my application and disable QUIC? or modify URLSessionConfiguration so system will not use QUIC?

I'm trying to distribute a sandboxed macOS app with a PacketTunnelProvider (system extension) via direct distribution (outside of AppStore). The app and the extension both use the same app group, using the new group.com.XXXX.YYYY format detailed here for 10.15+ https://developer.apple.com/forums/thread/721701 I've also followed the instructions below to get around the quirk of not being able to directly process it via XCode: https://developer.apple.com/forums/thread/737894 I've re-signed with Developer ID certificate, all that is smooth and successfully notarized. However upon running the app I get: "My.app" would like to access data from other apps. Checking ~/Library/Containers ~/Library/Group Containers I see the correct files folders have been created before I select Don't Allow and Allow. My app does not access any files or folders outside of the sandboxed directories. How can I prevent this from happening? In order to diagnose further, how to diagnose exactly which files/folder the app is trying to access that is causing this problem?

Hello, We're exploring the new URL Filter capability and we managed change the SimpleURLFilter so that it could work on macOS. However, on macOS it won't work as even when signed for debugging it tries to use Apple's OHTTP Relay. Failed to fetch Token Issuer Directory. <NSHTTPURLResponse: 0xca10ca580> { URL: https://gateway.icloud.com/pat-issuer-directory?issuer=localhost } { Status Code: 503 So I have two questions: Will it be possible to debug URL Filter locally on macOS? Even more important: how can I send a capability request so that our OHTTP Gateway could be used? I checked everywhere, but it seems there's simply no way to request this capability at this moment.

We are experiencing a large number of crashes in our production environment, mainly occurring on iOS 16 systems and iPhone 8 and iPhone X devices. The crash log and stack trace are as follows: Error: Assertion failed: (false) function _onqueue_rdar53306264_addWaiter file TubeManager.cpp line 1042 Crashed: com.apple.CFNetwork.LoaderQ 0 libsystem_kernel.dylib 0x7198 __pthread_kill + 8 1 libsystem_pthread.dylib 0xd5f8 pthread_kill + 208 2 libsystem_c.dylib 0x1c4b8 abort + 124 3 libsystem_c.dylib 0x70d8c err + 266 4 CFNetwork 0x1eb80 CFURLRequestSetMainDocumentURL + 6288 5 CFNetwork 0x44fd8 CFURLCacheRemoveAllCachedResponses + 22624 6 CFNetwork 0x39460 _CFHostIsDomainTopLevel + 968 7 CFNetwork 0x1f754 CFURLRequestSetMainDocumentURL + 9316 8 CFNetwork 0x233e0 CFURLRequestSetRequestPriority + 8792 9 CFNetwork 0x20d38 CFURLRequestCopyHTTPRequestBodyStream + 1612 10 CFNetwork 0x4f950 CFHTTPCookieStorageCopyCookies + 16276 11 CFNetwork 0x15878 CFURLRequestSetURL + 7600 12 libdispatch.dylib 0x637a8 _dispatch_call_block_and_release + 24 13 libdispatch.dylib 0x64780 _dispatch_client_callout + 16 14 libdispatch.dylib 0x3f6fc _dispatch_lane_serial_drain$VARIANT$armv81 + 600 15 libdispatch.dylib 0x401e4 _dispatch_lane_invoke$VARIANT$armv81 + 432 16 libdispatch.dylib 0x41304 _dispatch_workloop_invoke$VARIANT$armv81 + 1620 17 libdispatch.dylib 0x49f14 _dispatch_workloop_worker_thread + 608 18 libsystem_pthread.dylib 0x1bd0 _pthread_wqthread + 284 19 libsystem_pthread.dylib 0x1720 start_wqthread + 8 Have you encountered a similar issue before?

Hi everyone, I’m currently developing a macOS app that is distributed via a DMG file on our website. The app includes an App Extension (appex) for Network Extension functionality. I’m wondering if distributing via DMG on the web requires the app extension to be implemented as a System Extension instead of an App Extension. Is it necessary to migrate to System Extension for web-based DMG distribution, or can I continue using App Extension as is? Any insights or recommendations would be greatly appreciated. Thank you!

I'm writing an application that implements a Bonjour service and browser for the purpose of connecting to Logic Pro and interacting with a MIDI Device Script. Because it's connecting to Logic Pro running on the same system as the application, the service and browser do not need to access anything else on the local network. I'm creating the service and browser with calls like this: err = DNSServiceRegister( &serviceRef, 0, kDNSServiceInterfaceIndexLocalOnly, "MyService", "_osc._udp", "local", nullptr, 52854, txtLen, txtRecord, static_cast<DNSServiceRegisterReply>(myCallback), context ); err = DNSServiceBrowse( &browserRef, 0, kDNSServiceInterfaceIndexLocalOnly, "_osc._udp", nullptr, static_cast<DNSServiceBrowseReply>(browserCallback), context ); Despite the fact that I'm passing in kDNSServiceInterfaceIndexLocalOnly for the network interface, it still triggers an "Allow 'Application' to find devices on local networks?" permissions prompt. How can I avoid that prompt? It is both a significant failure point (in case users don't notice it or click 'Don't Allow' by mistake) but it may also scare them away, since it strongly implies my application is scanning devices on the local network, even though it's doing no such thing!

Im working on ios application that works with BLE device. The device uses BLE indications to provide data to the app. The goal is to achieve 100% data retrieval. According to the hardware team device behaves like this: CCCD Persistence: Device maintains Client Characteristic Configuration Descriptor (CCCD) with indication-enabled state across reconnections Resume Point: Device resends indications starting from the last unacknowledged indication before disconnection No Custom Logic: Follows standard BLE specification for indication reliability So it is expected that the device restores the indication streams from the last acknowledged one. My connection routine is: Discover services func centralManager(_ central: CBCentralManager, didConnect peripheral: CBPeripheral) { connectedPeripherals[peripheral.identifier] = peripheral peripheral.delegate = self updatePeripheralState(peripheral.identifier, to: .connected) print("Starting service discovery...") peripheral.discoverServices(nil) } Discover characteristics: func peripheral(_ peripheral: CBPeripheral, didDiscoverCharacteristicsFor service: CBService, error: Error?) { if let error = error { print("Characteristic discovery failed for service \(service.uuid): \(error.localizedDescription)") return } guard let characteristics = service.characteristics else { return } for characteristic in characteristics { if service.uuid == targetServiceUUID && characteristic.uuid == targetCharacteristicUUID { print("Found target characteristic! Enabling indications...") peripheral.setNotifyValue(true, for: characteristic) print(characteristic.properties.description) } } } Then the data retrieval: func peripheral(_ peripheral: CBPeripheral, didUpdateValueFor characteristic: CBCharacteristic, error: Error?) { if let error = error { print("Error reading characteristic value: \(error.localizedDescription)") return } if characteristic.service?.uuid == targetServiceUUID && characteristic.uuid == targetCharacteristicUUID { if let data = characteristic.value { let formatter = DateFormatter() formatter.timeStyle = .medium formatter.dateStyle = .none // data filtering since device is sending some other events sometims if data.count >= 15 { let event = decodeBytes(bytes: data) let now = Date() let timestamp = timestampFormatter.string(from: now) print("[\(timestamp)] Auto Increment: \(event.autoIncrement) Type: \(event.type)") } } else { print("Received indication with no data") } } } Using PacketLogger from xcode toolbox i have confirmed that: The device starts sending indications right after didConnect finishes The phone is sending ACKS for those indications Indications are not reaching didUpdateValueFor until peripheral.setNotifyValue(true, for: characteristic) properly executes This mekes me drop some data data on each reconnect. I already know I can do better in terms of service and characteristics discovery: I should discover only that one which is giving me the indications. But my intuition is: discover only the service and characteristic i care about will minimize the impact, but not guarantee 100% data retrieval Is this expected and confirmed CoreBluetooth behavior?

iPhone 12 pro with iOS 26.0 (23A5276f) App: https://developer.apple.com/documentation/wifiaware/building-peer-to-peer-apps We aim to use Wi-Fi Aware to establish file transfer between Android and Apple devices. Apple will act as the Publisher, and Android will act as the Subscriber. According to the pairing process outlined in the Wi-Fi Aware protocol (Figure 49 in the Wi-Fi Aware 4.0 specification), the three PASN Authentication frames have been successfully exchanged. Subsequently, Android sends the encrypted Follow-up PMF to Apple, but the Apple log shows: Failed to parse event. Please refer to the attached complete log. We request Apple to provide a solution. apple Log-20250808a.txt