We are using Multipeer Connectivity (MCSession, MCNearbyServiceBrowser, MCNearbyServiceAdvertiser) for nearby peer discovery and communication. **Observed behaviour: ** When Wi-Fi is ON (Not connected to any network) and Mobile Data is also ON: Peer discovery (foundPeer) consistently succeeds Invitation is sent using invitePeer MCSession transitions to .connecting The session remains indefinitely in .connecting connected is never reached notConnected is also not reported When Mobile Data is turned OFF, the same flow reliably reaches .connected. Key details: Both devices have Wi-Fi and Bluetooth enabled Browsing and advertising are active on both devices Application-level timeouts and session resets are implemented The Issue is reproducible across multiple devices with iOS 26 versions. Expectation / Question: We understand that Multipeer Connectivity does not use cellular data for peer discovery or transport. However, when Wi-Fi is available and peers are discovered successfully, we would like clarification on the following: Is it expected behavior that enabling Mobile Data can cause the invitation/connection phase to remain indefinitely in .connecting without transitioning to .notConnected? Are there recommended best practices to avoid stalled invitation or transport negotiation in this scenario? Is there a supported way to detect or recover from a stalled .connecting state beyond application-level timeouts and session resets? Any guidance on expected behavior or recommended handling would be appreciated.

When using the NEHotspotConfigurationManager applyConfiguration interface for network connection.Sometimes there is a pop-up prompt when the connection fails, and sometimes there is no pop-up prompt. Why is there no pop-up prompt when the connection fails

Greetings.I have an app today that uses multipeer connectivity extensively. Currently, when the user switches away from the app, MPC disconnects the session(s) - this is by design apparently (per other feedback). I'd like to hear if anyone has experimented with iOS9 multitasking / multipeer and whether MPC sessions can stay alive?Thanks

Hello, I’m reviewing the open-source mDNSResponder repository and have a question regarding licensing/provenance in mDNSCore/DNSDigest.c file. That file contains an embedded notice stating that parts of the MD5/digest implementation were derived from older OpenSSL sources and therefore include the legacy OpenSSL/SSLeay license text, even though OpenSSL itself is now Apache-2.0 starting from version 3.0. The legacy OpenSSL/SSLeay license is widely understood to impose additional attribution and notice requirements compared to Apache-2.0, and some downstream projects prefer to avoid it when a permissively licensed alternative is available. Repository: https://github.com/apple-oss-distributions/mDNSResponder File: https://github.com/apple-oss-distributions/mDNSResponder/blob/main/mDNSCore/DNSDigest.c#L66 I’d like to clarify a few points: Is the MD5/digest code in DNSDigest.c still based on pre–OpenSSL-3.0 sources, such that retaining the legacy OpenSSL/SSLeay license block is intentional and required? If the goal were to simplify licensing (Apache-2.0 only), would Apple consider replacing this MD5 implementation with an Apache-2.0–licensed alternative (for example, code derived from OpenSSL 3.x or another permissive implementation)? Are there any technical or policy reasons (compatibility, crypto policy, platform APIs) that make such a replacement undesirable? Since GitHub issues and PRs are restricted for this repository, I’m asking here for guidance. If maintainers agree that such an update would be useful, I’d be happy to help by preparing a PR for review. I've also created a feedback report for this topic, the reference ID is FB21269078. Thanks for any clarification.

Hello, I have a few questions regarding URL Filter (iOS 26) and Content Filter Providers. URL Filter According to the WWDC26 video, URL Filter appears to be available for both consumer and enterprise deployments. This seems consistent with the classic Network Extension Provider Deployment documentation (TN3134 – August 2025), where no specific deployment restriction is mentioned. However, a more recent document (Apple Platform Deployment, September 2025) indicates the following for URL Filter: “Requires supervision on iPhone, iPad and Mac” (with a green checkmark). 👉 My question: Is URL Filter actually available for consumer use on non-supervised iPhones (deployed on Testflight and AppStore), or is supervision now required? Content Filter Providers From past experience, I remember that Content Filter Providers were only available on supervised devices. Based on the current documentation, I am questioning their usability in a consumer context, i.e. on non-supervised iPhones. In the Network Extension Provider Deployment documentation, it is stated that this is a Network Extension and that, since iOS 16, it is a “per-app on managed device” restriction. In the more recent Apple Platform Deployment document, it states for iPhone and iPad: “App needs to be installed on the user’s iOS and iPadOS device and deletion can be prevented if the device is supervised.” 👉 My understanding: Supervised device: The Content Filter Provider is installed via a host application that controls enabling/disabling the filter, and the host app can be prevented from being removed thanks to supervision. Non-supervised device: The Content Filter Provider is also installed via a host application that controls enabling/disabling the filter, but the app can be removed by the user, which would remove the filter. 👉 My question: Can Content Filter Providers be used in a consumer context on non-supervised iPhones (deployed on Testflight and AppStore), accepting that the user can uninstall the host app (and therefore remove the filter)? Thank you in advance for your feedback. Sources: TN3134 => TN3134: Network Extension provider deployment | Apple Developer Documentation Apple Platform Deployment / Filter content for Apple devices => https://support.apple.com/en-gb/guide/deployment/dep1129ff8d2/1/web/1.0

I want to know the reason for last Wi-Fi disconnection. It would be helpful to that I can get the reason-code received from the access point.

Hello eveybody,Currently I'm working on an app which connects to a device. During testing I encounter an internal error of NEHotspotConfigurationErrorDomain. See the log snippet:Domain=NEHotspotConfigurationErrorDomain Code=8 "internal error." UserInfo={NSLocalizedDescription=internal error.}This error appears randomly. In one day I encountered it three times. The only solution I can think of is catching this error somehow and then telling the user to restart the device.After this error appears, the wifi functionality of iOS in all third party apps seems to be broken. Only restarting helps as far as I know. Also there seems to be nothing we as app developers can do about it. Therefor I wonder if there is some way to prevent this error somehow? The only solution I can think of is catching this error somehow and then telling the user to restart the device.Also since there is not much information about this error on the web, it would be really nice if someone can clarify whats going on with this error.Regards.

For Local network access, Chrome prompts the user to allow access and adds it to Settings --> Privacy & Security --> Local Network. However, for Safari, no prompt appears. How do I force Safari to authorise these local network access requests if it won't trigger the permission dialogue? Is there a specific WKWebView configuration or Safari-specific header required to satisfy this security check?

private static func getEthernetIPAddress(from interfaces: [String: String]) -> String? { // 常见虚拟以太网接口名（根据适配器型号可能不同） let poeEthernetInterfaces = ["en2", "en3", "en4", "en5", "eth0", "eth1"] for interfaceName in poeEthernetInterfaces { if let ethernetIP = interfaces[interfaceName], !ethernetIP.isEmpty { return ethernetIP } } return nil }//我们通过该方法去抓取有线网的IP地址，但是有的设备无法抓取到，怎样才能更准确的抓取到有线网络的IP地址

Hello team, Would this mean that content filters intended for all browsing can only be implemented for managed devices using MDM? My goal would be to create a content filtering app for all users, regardless of if their device is managed/supervised. thanks.

This is just an FYI in case someone else runs into this problem. This afternoon (12 Dec 2025), I updated to macOS 26.2 and lost my network. The System Settings' Wi-Fi light was green and said it was connected, but traceroute showed "No route to host". I turned Wi-Fi on & off. I rebooted the Mac. I rebooted the eero network. I switched to tethering to my iPhone. I switched to physical ethernet cable. Nothing worked. Then I remembered I had a beta of an app with a network system extension that was distributed through TestFlight. I deleted the app, and networking came right back. I had this same problem ~2 years ago. Same story: app with network system extension + TestFlight + macOS update = lost network. (My TestFlight build might have expired, but I'm not certain) I don't know if anyone else has had this problem, but I thought I'd share this in case it helps.

We've received logs and have spuriously reproduced the following behavior: calls to setTunnelNetworkSettings completing with NETunnelProviderError where the code is networkSettingsInvalid, and the error domain string is empty. After subsequent calls to setTunnelNetworkSettings, the tunnel is stopped via the userInitiated stop reason within around 1 second from the first failure. This happens after a number of successful calls to setTunnelNetworkSettings have been made in the lifetime of a given packet tunnel process. We can confirm that no user ever initiates the disconnection. We can confirm that the only significant changes between the different calls to setTunnelNetworkSettings are that the parameters contain different private IPs for the tunnel settings - the routes and DNS settings remain the same. In our limited testing, it seems that we can replicate the behavior we're observing by removing the VPN profile while the tunnel is up. However, we are certain the same behavior happens under other circumstances without any user interaction. Is this what memory starvation looks like? Or is this something else? Our main concern is that the tunnel is killed and it is not brought back up even though our profile is set to be on-demand. It's difficult to give any promises about leaks to our users if the tunnel can be killed at any point and not be brought back. The spurious disconnections are a security issue for our app, we'd like to know if there's anything we can do differently so that this does not happen. We tried to get DTS, but given that we have no way to reproduce this issue with a minimal project. But we can reproduce the behavior (kill the tunnel by removing it's profile) from a minimal Xcode project, is that considered good enough for a reproduction?

In our system, when a user enables a mobile hotspot and the system connects to it, the system attempts to verify WIFI availability by sending an HTTP GET request to http://captive.apple.com. Normally, the server returns: HTTP Status: 200 (OK) Content-Type: text/html This has always been used as a sign of normal connectivity. Issue: Since last Friday, the server sometimes responds with: Content-Type: application/octet-stream When this occurs, our system determines that the network is unavailable and displays a connection warning (a “!” icon). Question: Has Apple recently made any backend or CDN configuration changes to captive.apple.com that could affect the response type? Any advice how can we solve this problem? Thanks!

Is there any way to forcibly disable using QUIC? I've noticed this ends up causing issues with our ISP / router, and noticed for many of our customers as well. Creating an ephemeral session doesn't change things, and setting the request to "assumeHttp3Capable" to false doesn't fix things either. We are using Cloudflare Workers as the URL we are hitting, and thus aren't able to disable this server-side.

It works when one device is only a publisher and the other is only a subscriber. However, when both devices act as both publisher and subscriber simultaneously—which Apple’s documentation (https://developer.apple.com/documentation/wifiaware/adopting-wi-fi-aware#Declare-services) indicates is valid—the connection never establishes. After timing out, both NetworkListener and NetworkBrowser transition to the failed state. This appears to be a race condition in Network framework. Task.detached { try await NetworkListener( for: .wifiAware( .connecting( to: .myService, from: .allPairedDevices, datapath: .defaults ) ), using: .parameters { Coder( sending: ..., receiving: ..., using: NetworkJSONCoder() ) { TCP() } } ).run { connection in await self.add(connection: connection) } } Task.detached { try await NetworkBrowser( for: .wifiAware( .connecting( to: .allPairedDevices, from: .myService ) ), using: .tcp ).run { endpoints in for endpoint in endpoints { await self.connect(to: endpoint) } } }

NWPathMonitor appears to retain itself (or is retained by some internal infrastructure) once it has been started until cancelled. This seems like it can lead to memory leaks if the references to to the monitor are dropped. Is this behavior documented anywhere? func nwpm_self_retain() { weak var weakRef: NWPathMonitor? autoreleasepool { let monitor: NWPathMonitor = NWPathMonitor() weakRef = monitor monitor.start(queue: .main) // monitor.cancel() // assertion fails unless this is called } assert(weakRef == nil) } nwpm_self_retain()

NEAppProxyUDPFlow contains below property: open var localEndpoint: NWEndpoint? { get } Why is localEndpoint not available for NEAppProxyTCPFlow? Is there a way to determine the source port of a flow of type NEAppProxyTCPFlow within the following method of NETransparentProxyProvider? override func handleNewFlow(_ flow: NEAppProxyFlow) -> Bool {

Apologies if this is not the correct topic to post under. EpochField 5.2 is our application. It's a .NET MAUI application built against XCode 16. A customer of ours uses another app, TN3270, to connect to a mainframe host. After installing our app on an iPad and restarting the device, the TN3270 app will disconnect when suspended. Uninstalling our app (EpochField) will allow the TN3270 to suspend without disconnecting. We have tried removing background services, setting UIRequiresFullScreen to false or removing it entirely, and several other ideas. The only remedy seems to be uninstalling EpochField. On an iPad device: Install MochaSoft’s TN3270 app (free version is fine). Create a connection to ssl3270.nccourts.org, port 2023, SSL/TLS turned on, keep alive turned on. Verify that you can connect. Suspend the app by swiping up or choosing another app. Go back to TN3270 and verify that the app has not disconnected. Install EpochField 5.2. Do not run or configure the app, just install it. Repeat step 2. Restart the device. Open EpochField 5.2. You do not need to configure the app or login. Sometimes it isn't necessary to ever open EpochField to get the disconnects, but this is the most reliable way to reproduce the situation. Repeat step 2. The TN3270 app will now disconnect when suspended, even if EpochField is closed. You may need to wait a few seconds after suspending. Uninstall EpochField 5.2. Repeat step 2: the TN3270 app will now remain connected when suspended.

Hi, I am building an app that depends on multiple iOS devices connecting to a designated "coordinator" iOS device. I am using MPC, and it works great when the devices are connected to the same WiFi AP, with virtually 100% connection success. My definition of success is a near instant detection of available devices, >95% connection success rate, and a stable ongoing connection with no unexpected disconnects. The issue arises when the devices are not connected to the same WiFi network (or connected to no network with WiFi and bluetooth still on). Devices detect each other immediately, but when initiating a connection, both devices initiate a handshake, but the connection is not successful. In the few times where the connection succeeds, the connection quality is high, stable, and doesn't drop. Is this a known limitation of the framework? Could I be doing something wrong in my implementation?

I'm trying to use ThreadNetwork API to manage TheradNetworks on device (following this documentation: https://developer.apple.com/documentation/threadnetwork/), but while some functions on THClient work (such as getPreferedNetwork), most don't (storeCredentials, retrieveAllCredentials). When calling these functions I get the following warning/error: Client: -[THClient getConnectionEntitlementValidity]_block_invoke - Error: -[THClient storeCredentialsForBorderAgent:activeOperationalDataSet:completion:]_block_invoke:701: - Error: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service with pid 414 named com.apple.ThreadNetwork.xpc was invalidated from this process." UserInfo={NSDebugDescription=The connection to service with pid 414 named com.apple.ThreadNetwork.xpc was invalidated from this process.} Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service with pid 414 named com.apple.ThreadNetwork.xpc was invalidated from this process." UserInfo={NSDebugDescription=The connection to service with pid 414 named com.apple.ThreadNetwork.xpc was invalidated from this process.} Failed to store Thread credentials: Couldn’t communicate with a helper application. STEPS TO REPRODUCE Create new project Add Thread Network capability via Xcode UI (com.apple.developer.networking.manage-thread-network-credentials) Trigger storeCredentials let extendedMacData = "9483C451DC3E".hexadecimal let tlvHex = "0e080000000000010000000300001035060004001fffe002083c66f0dc9ef53f1c0708fdb360c72874da9905104094dce45388fd3d3426e992cbf0697b030d474c2d5332302d6e65773030310102250b04106c9f919a4da9b213764fc83f849381080c0402a0f7f8".hexadecimal // Initialize the THClient let thClient = THClient() // Store the credentials await thClient.storeCredentials(forBorderAgent: extendedMacData!, activeOperationalDataSet: tlvHex!) { error in if let error = error { print(error) print("Failed to store Thread credentials: \(error.localizedDescription)") } else { print("Successfully stored Thread credentials") } } NOTES: I tried with first calling getPreferedNetwork to initiate network permission dialog Tried adding meshcop to bojur services Tried with different release and debug build configurations