We want to set key-value pair (installation_token: xxxxx) into an app installed by MDM. Formerly we could set the key-value using Settings MDM command like this. <dict> <key>Command</key> <dict> <key>RequestType</key> <string>Settings</string> <key>Settings</key> <array> <dict> <key>Configuration</key> <dict> <key>installation_token</key> <string>xxxxxxx</string> </dict> <key>Identifier</key> <string>com.cloudflare.cloudflareoneagent</string> <key>Item</key> <string>ApplicationConfiguration</string> </dict> </array> </dict> We can still use this for the apps installed withInstallApplication MDM command, however we cannot apply this configuration into the app using Declarative Device Management. When we try it, we got an error like this. <dict> <key>CommandUUID</key> <string>.............</string> <key>Settings</key> <array> <dict> <key>ErrorChain</key> <array> <dict> <key>ErrorCode</key> <integer>12008</integer> <key>ErrorDomain</key> <string>MDMErrorDomain</string> <key>LocalizedDescription</key> <string>Could not modify apps managed by Declarative Device Management.</string> <key>USEnglishDescription</key> <string>Could not modify apps managed by Declarative Device Management.</string> </dict> </array> <key>Identifier</key> <string>com.cloudflare.cloudflareoneagent</string> <key>Item</key> <string>ApplicationConfiguration</string> <key>Status</key> <string>Error</string> </dict> </array> How can we work with managed application configuration with DDM?

A profile that contains setting of allowVPNCreation is false was installed duiring activation in my requirements. The iOS version is 18. AllowVPNCreation is first, setting the app's network is second, the app can't use network. Setting the app's network is first, AllowVPNCreation is second, the app works well. For example: Scene 1 Step 1: Install a profile that contains a setting where allowVPNCreation is false during activation. Step 2: Complete activation and enter the main screen. Step 3: Tap App Store, the screen displays network unavailable, needs to be set in Setting. Step 4: Open the network setting for App Store, but still closed.And the network settings for other apps are all closed; Step 5: Remove the profile. Step 6: After a minute, opening the network setting for App Store is work. Result: AllowVPNCreation effects app's newtork after entering the system for the first time. It don't happen below iOS 18. Scene 2 Step 1: The app's network setting is ok. Step 2: Install a profile that contains a setting where allowVPNCreation is false. Result: No effect。The same result below iOS 18. Is this a bug or new features, how to handle？

I’m looking for advice on implementing an Active Supervision Mode for enhanced parental control. My goal is to restrict access to both iOS system apps and third-party applications to create a safer and more tailored digital experience for my child. Here’s what I’d like to achieve: App Restrictions: Block specific apps (both iOS and third-party) and allow access only to approved ones. Time Limits: Set daily usage limits for individual apps or app categories. Content Filtering: Apply restrictions to block inappropriate content and age-inappropriate apps. Remote Management: Manage these settings remotely from my device for added convenience. Activity Monitoring: View app usage stats or receive alerts for policy violations. I understand that Screen Time on iOS offers basic parental controls, but I’m exploring whether iOS supports more advanced capabilities natively or through additional configurations. I’ve also heard that enrolling a device in Apple Business Manager (ABM) and linking it to an MDM (Mobile Device Management) solution might provide greater control. If this is a viable solution, could anyone provide guidance on: Enrolling a personal or family-owned device into Apple Business Manager. Linking an MDM for configuring app restrictions and monitoring usage. Alternatively, if there are third-party parental control apps that work seamlessly with iOS to achieve these goals, I’d appreciate your recommendations! Thanks in advance for your insights!

I'm trying to use DDM manager Safari Extensins in macOS Sequoia. I generate json and load it by mdm and ddm , but it doesn't seems to work. The json I loading is the following: { "Type": "com.apple.configuration.safari.extensions.settings", "Payload": { "ManagedExtensions": { "*": { "State": "AlwaysOn", "PrivateBrowsing": "AlwaysOn", "AllowedDomains": [], "DeniedDomains": [] } } }, "Identifier": "com.test.safari" } This following image is macOS Sequoia Console log. It show the "com.apple.configuration.safari.extensions.settings" had been run successfully, and no errors. macOS Sequoia response is the following: { "StatusItems" : { "management" : { "declarations" : { "activations" : [ { "active" : true, "identifier" : "com.example.act", "valid" : "valid", "server-token" : "5cc191206d1b1933" } ], "configurations" : [ { "active" : true, "identifier" : "com.test.safari", "valid" : "unknown", "server-token" : "29d3ec5ab48e6367" } ], "assets" : [ ], "management" : [ ] } } }, "Errors" : [ ] } you can see macOS Sequoia response , The "valid" value is always "unknown" at ""identifier" : "com.test.safari", but "Errors" is empty, Safari app don't load extensions , the SafariExtensionSettings" ddm don't work, Is there anything wrong with "SafariExtensionSettings" json? or how can I debug it

We are using management properties in DDM to assign configurations and assets to a particular device, and one of those properties should be updated by a business app on the device. For example, if the business application is not launched every 30 days, then a predicate should evaluate to false and the device put into single app mode to force the application to run. If, however, the app is launched any time in the 30 days, then the counter should be reset. Essentially trying to enforce that users in the field cannot work offline for extended periods of time without getting the latest dataset from the company. The single app mode part is very clear and the predicate to assign the configuration based on the date in the management property seems logical. However, the question is: Can a predicate be built upon data that is updated by the custom MDM app? ie: If the app is launched on the device without connectivity, can a property be updated that the DDM predicate system can access that can be used as an input property? such as "last launch time" or "last check-in" of the custom app? Alternately, could the custom MDM app read any of the management properties set via DDM? That way the user would know the value that the DDM configuration for restricting the device.

Main Issue We are experiencing an issue where iOS devices become unresponsive when attempting to shutdown or reboot from the lock screen while locked into Single App Mode via MDM or Apple Configurator. Steps to Reproduce: Start any iOS device. Use Apple Configurator or an MDM solution to enable Single App Mode. Wait for the device to lock into the specified app. Lock the device so that it goes to the lock screen. Hold the Power button and Volume Up button until the shutdown/emergency screen appears. At this point, the device becomes unresponsive. After approximately 30 seconds, the message "Guided Access app unavailable. Please contact your administrator" appears. The device is now frozen, and the only way to recover is to force restart it using Apple's forced restart method (Apple Support Link). Additional Issue: Additionally, we observe that when using an app in Single App Mode, attempting to reboot the device and canceling the reboot prevents any subsequent reboot attempts until a force restart is performed. Steps to Reproduce This Behavior: Lock the iOS device into Single App Mode. Use the app normally. Attempt to shut down the device by holding the Power and Volume Up buttons. The shutdown/emergency screen appears as expected. Cancel the shutdown by tapping "Cancel." The device returns to the lock screen. Swipe up to return to the app. Attempt to shut down the device again using the same method. Nothing happens—the shutdown screen no longer appears. The only way to reboot the device now is through a forced restart. This appears to be a bug in Single App Mode behavior, potentially related to Guided Access restrictions. Has anyone else encountered this issue? Is this the right place to report this issue? or should I report it elsewhere? I have more videos and material showing how to reproduce this issue if needed.

I found that "search" endpoint is recently added to api.ent.apple.com : https://developer.apple.com/documentation/devicemanagement/get-catalog-search-results However it seems we cannot find custom apps using this API even with sToken. Is it not suppoted yet? Thank you

Hello, I am currently attempting to use declarative management to install enterprise application, however I am running into errors. Initially the device was failing to unpac the initial manifest it downloaded. After pulling logs from the device it was revealed that the manifest must include the bundle-version for it to parse as valid. Adding this has allowed for the ipa to be fetched from the server however there is a secondary issue. The application is on the device but is unable to be opened due to the device being unable to validate its integreti. Any additional information would be useful. For completion the working manifest will be pasted below. It should be noted that the manifest below does work when requesting application installs through MDM commands. <***> <items type="array"> <dict> <assets type="array"> <dict> <kind type="string">software-package</kind> <url type="string">https://domain/web/mdm/ios/enterpriseipa/bundle.id</url> </dict> </assets> <key type="dict" name="metadata"> <bundle-identifier type="string">bundle.id</bundle-identifier> <kind type="string">software</kind> <subtitle type="string">app</subtitle> <title type="string">app</title> <bundle-version type="string">x.x.x</bundle-version> </key> </dict> </items> </***> </plist>

Hello All, I am currently attempting to get application config working with enterprise apps but it seems as though the asset config is not applying at all. While the asset and application install correctly it does not seem that the config is read at all judging from the status message returned. "StatusItems" : { "app" : { "managed" : { "list" : [ { "name" : "apps", "config-state" : { "app-config-state" : { "state" : "unknown" } }, "identifier" : "app.identifier", "version" : "3.2", "short-version" : "3.2.0", "state" : "managed", "declaration-identifier" : "dec-identifier" } ] } } }, "Errors" : [ ] } The asset file being sent down is as follows: <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Config 1</key> <string>Value 1</string> <key>Config 2</key> <string>Value 2</string> <key>Config 3</key> <string>Value 3</string> </dict> </plist> This is the config report being sent back by the device after everything has been fetched: "StatusItems" : { "management" : { "declarations" : { "activations" : [ { "active" : true, "identifier" : "group.activation.payload", "valid" : "valid", "server-token" : "56792E4AE25C3286640B45E6BD265AE97545B2B87F90A6355919FD8B2E3C3AB3" } ], "configurations" : [ { "active" : true, "identifier" : "app.install", "valid" : "valid", "server-token" : "34D7ACECAE16EE9EEAC0630FF2FF85524FFBB5BA3CB18CFB6296FBC860368C85" }, { "active" : true, "identifier" : "ios.policy.subscription.list", "valid" : "valid", "server-token" : "376913E11BE7D26EC745B3B68C6FA94C4FC061B1B736D143EBE0F12FF73ADFF8" } ], "assets" : [ { "active" : true, "identifier" : "app.config.reference", "valid" : "valid", "server-token" : "1CFBE30EB56309005F742D667B80242E6A3CDC08ED228D0BC5F87749C6BBAB77" } ], "management" : [ ] } }, "app" : { "managed" : { "list" : [ { "state" : "downloading", "declaration-identifier" : "app.install", "identifier" : "app.identifier", "name" : "apps", "config-state" : { "app-config-state" : { "state" : "unknown" } } } ] } } }, "Errors" : [ ] } Additional info would be useful, though a sysdiagnosis will be submitted to feedback as well. Config did apply correctly when sending down through Install application command

Hello, We're testing the new allowedExternalIntelligenceWorkspaceIDs key in the MDM Restrictions payload on supervised iPads. According to Apple's documentation, this key expects an "external integration workspace ID", but it's not clear what this specifically refers to. We've tried the following IDs individually (one at a time, as documentation says only one is supported currently): OpenAI Organization ID ChatGPT user email Apple ID used in ChatGPT Google ID used in ChatGPT login The profile installs correctly via MDM and the key is set, but we want to confirm: What exactly is considered a valid "external integration workspace ID" for this key? Is there a way to verify that the restriction is working as intended on the device (e.g. does it limit specific integrations or apps)? Is there an official list of services that currently support this? Any clarification from Apple or other developers with experience on this would be very helpful. Thanks in advance.

Is there any mechanism to restrict camera usage on a user-owned device, once they have opted in, consented to the restriction, and installed a management profile? Documentation suggests it was possible with allowCamera, but has be deprecated on unsupervised devices. Am I understanding correctly that it's simply not possible anymore unless the device is supervised?

This test setup is Jamf Pro as the MDM with Entra as the IdP. PSSO is working on Sequoia devices. Prior to Tahoe, PSSO required the following three items: An existing local account, the delivery of Company Portal, and a profile containing PSSO payload. Based on the Tahoe announcement, it looks like PSSO is now available during Setup Assistant, removing the requirement of first creating a local account. I assume this means that the requirements now as easy as deploying Company Portal and the PSSO profile during the Pre-Stage policy. I attempted this on the macOS 26 beta 1 and during Setup Assistant, with the PSSO profile delivered, Setup Assistant prompts me to login to my IdP. However, pressing Continue will result in a failure, notifying me that the application required is not available. The continue button is now inactive but a "try again" button is available. This results in the loop of trying and then failing, stating that the required application is not available. I eventually must quit Setup Assistant which exits it and drops me at the login window. The only account that is visible is the management account. A trip into DFU and an IPSW restore then follows. Am I trying this too soon? Is PSSO at Setup Assistant not yet fully supported? Is there another requirement other than delivering Company App in the prestige alongside the profile? I've enabled the beta channel in MAU but there is no newer Company Portal being offered. Any guidance here would be appreciated as this is the PSSO announcement I've been waiting for since the deprecation of Apple Enterprise Connect.

m personal iPhone is managed by an Unauthorized and Unknown mdm management team, The profile isn’t showing up in VPN Settings and I can’t remove them from having Remote access and control over my Personal Device! I’ve SPENT MANY MONTHS TRYING TO GET SUPPORT VIA EMAILING APPLE DEVELOPER AND SPEAKING TO APPLE SUPPORT WHICH HAS BEEN EXTREMELY EXHAUSTING AND HUMILIATIN! I’ve resorted to contacting Internet crime websit, the federal trade commissio, Better business bureau and Consumer Affairs to file an online complaint against Apple for not complying with their Security and Privacy policy for consumers accounts! Because of this unauthorized and unknown mdm device management profile I don’t have COMPLETE CONTROL OVER MY OWN IPHONE! ! Unable to find a team with the given Team II 'L95TAW5KWP' to which you belong. Pleas Developer Program Support. https://developer.apple.com/support I contacted developer support via email and also tried calling but they don’t respond!

I'm currently implementing a managed app using the new AppConfig specification. I referred to Apple's official documentation: Specifying and decoding a configuration. Based on the example provided in the "Publish your configuration specification" section, I structured my application configuration plist like this: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>configuration</key> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </dict> </plist> When I deployed this configuration via my MDM server, the server reported valid for the activation, configuration and asset (which is the plist), but the configuration did not reflect or apply within my app. My app was unable to retrieve these settings. After some troubleshooting, I found that removing the top-level <key>configuration</key> wrapper resolved the issue. The following plist structure successfully pushed the configuration to my app: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>account</key> <dict> <key>username</key> <string>test user</string> <key>password</key> <string>test 123</string> </dict> <key>domain</key> <string>test example.com</string> </dict> </plist> My question is: Is the inclusion of the <key>configuration</key> wrapper (as shown in the Apple documentation example) incorrect for the current AppConfig implementation? Or is this structure intended for a future release (e.g., iOS 26 or beyond) and the documentation implicitly refers to it, causing confusion for current implementation? Any clarification would be greatly appreciated! Thank you!

Hello, I'm currently working on implementing app installation features, referencing the app.managed.yaml declaration on GitHub: https://github.com/apple/device-management/blob/0a4527c5ea21825fd23e08273ccdb9e2302458ce/declarative/declarations/configurations/app.managed.yaml My question pertains to the InstallBehavior.Version key. The current specification indicates its type as <integer>: key: Version title: Version supportedOS: iOS: introduced: '26.0' macOS: introduced: '26.0' visionOS: introduced: '26.0' type: <integer> Is there a way to specify the app version using a string format, such as x.y.z, instead of the integer (App Store External Version Identifier - EVID)? Allowing for a simpler version specification would make app version management through MDM more flexible and efficient. I believe this would significantly streamline the deployment and operation of Apple devices within organizations. Any guidance or consideration for this would be greatly appreciated. Thank you.

When I try to sign in Managed Apple ID in supervised device there appears a prompt stating that "Apple ID" is a work account.This account must be signed in as a work account on this device.When I click continue it takes to VPN and device management tab where MDM profile already exists. Note:The managed Apple ID has a ICloud subscription for it. When I remove the subscription for the Apple ID and try to sign in, it works. Kindly help on this or advise on any additional steps required to enable sign in for managed Apple ID in this scenario

ABM has introduced a target date for moving a device from one MDM server to a new one. However, there's nothing in the API for setting that when you use the API to move MDM server Am I missing something or does it just not exist? Thanks Caroline

Hello All, I am currently developing a mobile management system using declarative management and for the most part it is pretty great. There is one consistent issue I have run into and it comes when testing VPP app installs with not enough licenses. When my server detects that it can't provide a license ID it will return a 404, which causes the rest of the DM syncing to stop, and the activation to throw an error. Per the documentation for using simple activation: An array of strings that specify the identifiers of configurations to install. A failure to install one of the configurations doesn’t prevent other configurations from installing The above would imply that if a config fails it should not affect anything else (aside from possibly reporting an error. Am I returning the wrong error code for it to continue or is the behavior correct and the documentation is wrong? Any additional info would be useful

Hello, We are working with an iOS app that is distributed as a Public Unlisted App Store app. Our MDM allows us to import the app by URL, but when added this way, the app is marked as unmanaged in the inventory. Because of that, we cannot assign a Managed App Configuration payload to it in the normal way. What we are trying to achieve: Deliver a configuration profile to all enrolled devices before the app is installed. When the user installs the app from the MDM catalog, the app should immediately see the configuration values. Questions we’re hoping to clarify: Is it technically feasible to pre-provision a Managed App Configuration for an app in this scenario, by pushing a .mobileconfig profile to all devices? If yes, what would be the correct payload format and content of such a .mobileconfig file? We’ve tested a profile format we found here that uses com.apple.managed-app-config PayloadType and a ManagedAppConfiguration key with the bundle ID nested inside, but iOS reports this as “payload not recognized.” From what we understand, that may not be part of Apple’s schema. Any guidance from Apple or the community on whether this use case is possible (and, if so, what the valid profile format should look like) would be very helpful. Note: For a complicated company policy, at the moment we are not able to participate in ABM. Thanks in advance!

When an iOS 26.0 device is prepared in supervised mode, wifi connection screen is showing when the device is restarted. This wifi connect appears always on restart. I have tried using Apple Configurator GUI and Command line (cfgutil) command. In both cases, The behavior Wifi screen is showing up on restart for supervised mode. Cfgutil command: cfgutil -C {Certificate} -K {Key} prepare --supervised --name {NAME} --host-cert {Certificate} --skip-all Note: In non-supervised mode and other iOS, the wifi screen is not showing. Apple Configurator version: 2.18 iOS version: 26.0 Device model: iPhone 11 and above. Anyone else facing this issue? Any help is super appreciated.