I want develop an app for real-time streaming spatial video transmission from an Apple Vision Pro to another Apple Vision Pro and play, like MV-HEVC, does it's possible? If it's possible how to make it?

I am trying to Build server for testing on Linux(Alma linux 9 VM) NAME="AlmaLinux" VERSION="9.7 (Moss Jungle Cat)" ID="almalinux" ID_LIKE="rhel centos fedora" VERSION_ID="9.7" PLATFORM_ID="platform:el9" PRETTY_NAME="AlmaLinux 9.7 (Moss Jungle Cat)" ANSI_COLOR="0;34" [azuki@AlmaDevVM ~]$ uname -m x86_64 I have tried the following steps: Before starting, ensured that Swift 6 installed. Referred https://www.swift.org/install/ for instructions. Build the library In Terminal, uses the following commands to compile the Swift library: cd Development/Key_Server_Module/Swift swift build -Xbuild-tools-swiftc -DTEST_CREDENTIALS After building the library, ran test cases to ensure the library behaves as expected. ALL unit tests are passing with the development credentials. • Since I was using an x86_64 machine: export LD_LIBRARY_PATH=./Sources/prebuilt/x86_64-unknown-linux-gnu/ Run all tests: swift test -Xbuild-tools-swiftc -DTEST_CREDENTIALS --disable-swift-testing Build the server Build the server: Apache Before starting, ensured the following: a. Installed Apache HTTPD and the dev tools. Using the following command for installation: yum install httpd httpd-devel redhat-rpm-config b. After this, integrated it into the Apache server environment with swift library that was built above. Used the following command to build the server using apxs: • Since I was using an x86_64 machine: apxs -i -a -c -Wl,-L${PWD}/.build/x86_64-unknown-linux-gnu/debug/ -Wl,-lswift_fpssdk -Wl,-L${PWD}/Sources/prebuilt/x86_64-unknown-linux-gnu -lfpscrypto -Wl,-R${PWD}/.build/x86_64-unknown-linux-gnu/debug server_setup/mod_fps.c c. Next, copied the dependent libraries to the Apache modules folder using these commands: • If using an x86_64 machine: cp Sources/prebuilt/x86_64-unknown-linux-gnu/libfpscrypto.so /usr/lib64/httpd/modules/libfpscrypto.so cp .build/x86_64-unknown-linux-gnu/debug/libswift_fpssdk.so /usr/lib64/httpd/modules/libswift_fpssdk.so d. Configuring Apache HTTPD Configured Apache HTTPD by adding the module and handler to your Apache HTTPD configuration (/etc/httpd/conf/httpd.conf). Note that the apxs command may automatically add the LoadModule line in the previous step. Listen 8080 LoadFile /usr/lib64/httpd/modules/libfpscrypto.so LoadFile /usr/lib64/httpd/modules/libswift_fpssdk.so LoadModule fps_module /usr/lib64/httpd/modules/mod_fps.so <Location "/fps"> SetHandler fps_handler Copy the credentials to the Apache modules folder. cp -r ../credentials /usr/lib64/httpd/modules/ export FPS_CERT_PATH= /usr/lib64/httpd/modules/credentials/test_certificates.json e. Run your server You can run the Apache HTTPD server with the configured module by using the following command: httpd -D FOREGROUND No issues see till step. Get SDK version [azuki@AlmaDevVM Key_Server_Module]$ curl localhost:8080/fps/v 26.0.0 But when i try to generate license [azuki@AlmaDevVM Key_Server_Module]$ curl -d ../Test_Inputs/iOS/spc_ios_hd_lease_2048.json localhost:8080/fps {"fairplay-streaming-response":{"create-ckc":[{"id":1,"status":-42601}]}} Can you please suggest what i might be missing here?

The ASk is used by the KSM to derive the dASk, which is then used to decrypt the SK...R1. If the only thing we give the client is the certificate, how does it encrypt the SK...R1 so the server is able to process it. Would be nice to know it it works generally, because I've been getting questions about it and can't provide a helpful answer. Thanks in advance.

Hello, I am currently developing a video player using Custom AVPlayer SDK and testing LL-HLS live streaming. I encountered a specific error, CoreMediaErrorDomain -15418, during playback. I have searched through the official documentation and the forums, but I could not find any information regarding this error code. I would like to inquire about the following: Description & Cause: What does the error code -15418 specifically represent in the context of CoreMedia and LL-HLS? Severity: Is this a critical error that halts playback, or is it merely a warning? Environment Details: iOS Version: iOS 26.2 Device: iPhone 15 Pro Max Stream Type: LL-HLS (Low-Latency HLS) Impact: Quality drops Any insights or references to documentation would be greatly appreciated. Thank you.

Hello, I have a problem generating a 2048-bit FairPlay Streaming certificate. I tried generating SDK v26.x certificate in two ways. (1) Use existing certificate (2) Create new certificate Though, in both ways, Apple gives me a certificate bundle of 1024-bit certificate. (fps_certificate.bin) I've uploaded 2048-bit CSR on creating a certificate. Just to note, I have created a SDK v4.x certificate few years ago. Have anyone bumped into a same issue? Or am I missing something?

Hi We’re updating our KSM to support SPC v2/v3 and currently operate with both legacy SDK4 credentials (ASK + 1024 cert) and SDK26 credentials (certificate bundle + provisioning data + 1024/2048 keys). Our client apps run across a wide range of iOS/tvOS versions, so we want to follow Apple’s recommended client strategy for certificate selection. The docs describe SHA‑1 vs SHA‑256 in the SPC header, but do not specify which OS versions should use SDK4 vs SDK26 credentials. Could you clarify: Is there an official minimum iOS/tvOS version where you recommend SDK26 credentials for client apps? For older OS versions (e.g. iOS 15), is SDK4 still the recommended choice for client apps? Are there any official migration guidelines for client apps moving from SDK4 to SDK26 credentials? Thanks in advance.

Hello, I have implemented Low-Latency Frame Interpolation using the VTFrameProcessor framework, based on the sample code from https://developer.apple.com/kr/videos/play/wwdc2025/300. It is currently working well for both LIVE and VOD streams. However, I have a few questions regarding the lifecycle management and synchronization of this feature: 1. Common Questions (Applicable to both Frame Interpolation & Super Resolution) 1.1 Dynamic Toggling Do you recommend enabling/disabling these features dynamically during playback? Or is it better practice to configure them only during the initial setup/preparation phase? If dynamic toggling is supported, are there any recommended patterns for managing VTFrameProcessor session lifecycle (e.g., startSession / endSession timing)? 1.2 Synchronization Method I am currently using CADisplayLink to fetch frames from AVPlayerItemVideoOutput and perform processing. Is CADisplayLink the recommended approach for real-time frame acquisition with VTFrameProcessor? If the feature needs to be toggled on/off during active playback, are there any concerns or alternative approaches you would recommend? 1.3 Supported Resolution/Quality Range What are the minimum and maximum video resolutions supported for each feature? Are there any aspect ratio restrictions (e.g., does it support 1:1 square videos)? Is there a recommended resolution range for optimal performance and quality? 2. Frame Interpolation Specific Questions 2.1 LIVE Stream Support Is Low-Latency Frame Interpolation suitable for LIVE streaming scenarios where latency is critical? Are there any special considerations for LIVE vs VOD? 3. Super Resolution Specific Questions 3.1 Adaptive Bitrate (ABR) Stream Support In ABR (HLS/DASH) streams, the video resolution can change dynamically during playback. Is VTLowLatencySuperResolutionScaler compatible with ABR streams where resolution changes mid-playback? If resolution changes occur, should I recreate the VTLowLatencySuperResolutionScalerConfiguration and restart the session, or does the API handle this automatically? 3.2 Small/Square Resolution Issue I observed that 144x144 (1:1 square) videos fail with error:   "VTFrameProcessorErrorDomain Code=-19730: processWithSourceFrame within VCPFrameSuperResolutionProcessor failed" However, 480x270 (16:9) videos work correctly. minimumDimensions reports 96x96, but 144x144 still fails. Is there an undocumented restriction on aspect ratio or a practical minimum resolution? 3.3 Scale Factor Selection supportedScaleFactors returns [2.0, 4.0] for most resolutions. Is there a recommended scale factor for balancing quality and performance? Are there scenarios where 4.0x should be avoided? The documentation on this specific topic seems limited, so I would appreciate any insights or advice. Thank you.

According to the documentation (https://developer.apple.com/documentation/avfoundation/avcontentkeyrequest/originatingrecipient?changes=_3&language=objc), starting with ios 18.4, I can get AVContentKeyRecipient from AVContentKeyRequest. But when I try to get it, I get a crash. What could be the issue? I want to note that I add the asset to the AVContentKeySession using the addContentKeyRecipient method (https://developer.apple.com/documentation/avfoundation/avcontentkeysession/addcontentkeyrecipient(_:)?changes=_3&language=objc).

Hello, I am developing a custom player SDK based on AVPlayer. While testing LL-HLS streams, I intermittently encounter the following error: Error Domain=CoreMediaErrorDomain Code=-12880 Since I cannot find documentation for this specific code, could you please clarify its meaning? Specifically, I would like to know if this is a critical error that disrupts playback, or if it is just a warning that can be safely ignored. Any insights would be appreciated. Thank you.

Hello, I’m using a valid certificate bundle generated with SDK 26 (combined RSA‑1024 + RSA‑2048). However, all my devices currently still generate SPC v2 during playback, including my iPhone 16 under iOS 26.2. Apple staff mentioned that future iOS versions will send SPC v3 when using an SDK 26 certificate bundle. Could you please clarify: Which iOS/macOS versions will first support SPC v3? Are there any additional client‑side requirements (Safari version, playback APIs, headers, etc.) to trigger SPC v3? Is there any way to test SPC v3 today, e.g., using beta builds? Thank you!

Hello, I am reviewing the sample codes of FairPlay Streaming SDK 26 and there was a place where I think is a mistake. The codes are for the server, for both Swift and Rust codes. There is an if statement which compares "ProtocolVersionUsed"(spcData.versionUsed) and SPCVersion1 constant, though "ProtocolVersionUsed" and SPC Version is a different thing, so shouldn't it be using a different constant value? [createContentKeyPayload.swift] // Fallback to version 1 if content can have encrypted slice headers, which need to be decrypted separately. Slice headers are not encrypted when using CBCS. if serverCtx.spcContainer.spcData.versionUsed == base_constants.SPCVersion.v1.rawValue && [createContentKeyPayload.rs] // Fallback to version 1 if content can have encrypted slice headers, which need to be decrypted separately. Slice headers are not encrypted when using CBCS. if (serverCtx.spcContainer.spcData.versionUsed == SPCVersion::v1 as u32) && Thank you.

Hi, Has anyone been able to protect the audio part of FairPlay protected content from being captured as part of screen recording on Safari/iOS (PWA and/or online web app)? We have tried many things but could not prevent the audio from being recorded. Same app and content on Safari/Mac does not allow audio to be recorded. Any tips?

Hello, I am currently developing a live streaming application using AVPlayer to play LL-HLS (Low-Latency HLS) content. During our testing phase, we consistently encountered the following error in the logs: CoreMediaErrorDomain Code=-15517 The challenge we are facing is that the error description is quite vague. It only provides cryptic messages such as "Key not found" or "No value information," which makes it extremely difficult to identify the root cause or perform a deep-dive analysis. I have searched through the official Apple Developer documentation and technical notes, but I couldn’t find any specific reference to what Code -15517 signifies in the context of LL-HLS or CoreMedia. Regarding this issue, I have the following questions: What is the specific meaning of this error code (-15517)? Does it relate to missing tags in the HLS manifest, or is it an internal state issue within the AVPlayer stack? Specifically, I would like to know if this is a critical error that disrupts playback, or if it is just a warning that can be safely ignored. Is there any additional logging or debugging tool you would recommend to further investigate "Key not found" issues in LL-HLS? Any insights or guidance from the community or Apple engineers would be greatly appreciated. Thank you in advance for your help.

Hi everyone, Our team is encountering a reproducible crash when using VTLowLatencyFrameInterpolation on iOS 26.3 while processing a live LL-HLS input stream. 🤖 Environment Device: iPhone 16 OS: iOS 26.3 Xcode: Xcode 26.3 Framework: VideoToolbox 💥 Crash Details The application crashes with the following fatal error: Fatal error: Swift/ContiguousArrayBuffer.swift:184: Array index out of range The stack trace highlights the following: VTLowLatencyFrameInterpolationImplementation processWithParameters:frameOutputHandler: Called from VTFrameProcessor.process(parameters:) Here is the simplified implementation block where the crash occurs. (Note: PrismSampleBuffer and PrismLLFIError are our internal custom wrapper types). // Create `VTFrameProcessorFrame` for the source (previous) frame. let sourcePTS = sourceSampleBuffer.presentationTimeStamp var sourceFrame: VTFrameProcessorFrame? if let pixelBuffer = sourceSampleBuffer.imageBuffer { sourceFrame = VTFrameProcessorFrame(buffer: pixelBuffer, presentationTimeStamp: sourcePTS) } // Validate the source VTFrameProcessorFrame. guard let sourceFrame else { throw PrismLLFIError.missingImageBuffer } // Create `VTFrameProcessorFrame` for the next frame. let nextPTS = nextSampleBuffer.presentationTimeStamp var nextFrame: VTFrameProcessorFrame? if let pixelBuffer = nextSampleBuffer.imageBuffer { nextFrame = VTFrameProcessorFrame(buffer: pixelBuffer, presentationTimeStamp: nextPTS) } // Validate the next VTFrameProcessorFrame. guard let nextFrame else { throw PrismLLFIError.missingImageBuffer } // Calculate interpolation intervals and allocate destination frame buffers. let intervals = interpolationIntervals() let destinationFrames = try framesBetween(firstPTS: sourcePTS, lastPTS: nextPTS, interpolationIntervals: intervals) let interpolationPhase: [Float] = intervals.map { Float($0) } // Create VTLowLatencyFrameInterpolationParameters. // This sets up the configuration required for temporal frame interpolation between the previous and current source frames. guard let parameters = VTLowLatencyFrameInterpolationParameters( sourceFrame: nextFrame, previousFrame: sourceFrame, interpolationPhase: interpolationPhase, destinationFrames: destinationFrames ) else { throw PrismLLFIError.failedToCreateParameters } try await send(sourceSampleBuffer) // Process the frames. // Using progressive callback here to get the next processed frame as soon as it's ready, // preventing the system from waiting for the entire batch to finish. for try await readOnlyFrame in self.frameProcessor.process(parameters: parameters) { // Create an interpolated sample buffer based on the output frame. let newSampleBuffer: PrismSampleBuffer = try readOnlyFrame.frame.withUnsafeBuffer { pixelBuffer in try PrismLowLatencyFrameInterpolation.createSampleBuffer(from: pixelBuffer, readOnlyFrame.timeStamp) } // Pass the newly generated frame to the output stream. try await send(newSampleBuffer) } 🙋 Questions Are there any known limitations or bugs regarding VTLowLatencyFrameInterpolation when handling live 60fps streams? Are there any undocumented constraints we should be aware of regarding source/previous frame timing, pixel buffer attributes, or how destinationFrames and interpolationPhase arrays must be allocated? Is a "warm-up" sequence recommended after startSession() before making the first process(parameters:) call?