Hello all, As you may know, the company ProofPoint is an Apple partner, and is engaged (I think) to reduce misuse of icloud emails. We have two servers solely set up for our web-app, which is a specialised forum for apartment owners. The new servers were established about the same time, with the same provider, with clean new IP addresses - and as mentioned above, are only used for this web-app. During a testing phase a YEAR ago, we became aware that our in-house icloud emails weren't receiving notifications via the app, and further investigations revealed that the cause was that ProofPoint had placed a block on that server's IP. We immediately, via their website form initiated a Support Ticket, which, the site indicated was lodged, BUT we have never received any response to that Ticket, nor have we received any response to four subsequent Tickets we initiated - nothing. In over a year!! Yesterday, we contacted Apple support, but the devices area of support is the main section and they said it wasn't an issue they could assist with. Some relevant matters: SPF: DKIM: DMARC: are, I believe all configured correctly (and Gmail gives a PASS to all of them). The IP is not blacklisted by any list we are aware of. Our other server's IP isn't blocked by ProofPoint. So, literally at wits end, I'm reaching out to the developer subscribers here to see if they have any suggestions for us. We currently are unable to accept any new subscriber that is using an icloud email address, and that's an absurd situation to be in. Surely we don't have to go to the trouble and inconvenience of obtaining a new IP because of this!!! But when we can't get ANY response to the Support Tickets, it's really hard. Thanks

iOS18的app中加载了自己开发的H5页面，H5页面有个input输入框，每次输入框聚焦的时候，都会弹出键盘滑行键入的提示：“滑动手指将字母拼成词以快速键入”，应该怎么修改，达到不每次都弹出这个提示呢

WebAuthn can be used in Safari, but when using it with WKWebView, you need to set the default browser definition (com.apple.developer.web-browser). Is this correct? Also, is it possible that the terms of use will change or that it will no longer be available in WKWebView in the future?

Apple must comply with the requirements of the Level Index, the global digital credit gateway, and suspend gift cards and similar services until formal arrangements are made with service providers.

Hey, very strange problem I have on iOS when shared web as an app (pwa) to home screen. Whenever I use it via safari browser on iPhone, it works 100% fine every time. However, when I put it as an app on home screen, first time I open it it works fine, when i close it and reopen again, it just doesnt start recording. I have to restart my phone for it to work. So it works one time, I guess somehow it doesnt end stream or something, but in code I've tried all the possible ways to close and clean the track. tried GPT, Claude, Gemini solutions. nothing worked, it just works 1 time as PWA. my last hope is someone else encountered this issue and may try to help me ? https://pastebin.com/85i2L2vH

We have a Smart App Banner (including App Clip) on our website and have noticed today that the banner's background color has changed. It no longer has the default white background and blue button color, instead it has a background color that matches our page's background, and even the color of the button has changed. What's interesting is that we have not triggered this change at all. The colors seemingly changed by themselves. Looking at the Apple Documentation, no customization options are mentioned. Searching the web, the theme-color meta tag is mentioned in relation to this, however we haven't even included that tag on our page. What is triggering this color change then and how can we influence it?

When we embed some of the youtube videos are unable to load in the Mobile app but at the same time it works in Website. I need to allow it in both places. I have tried both embed and native sdk for youtube in iOS.

From a mail app or similar, when opening a webpage in Safari as an external browser, JavaScript on the webpage stops running if Safari goes into the background. Is there a way to prevent this from happening? Sample code for the counter: Behavior: Upon returning from the background, the counter continues for about 7-8 seconds but does not progress further. For example, if Safari is kept in the background for about 20 seconds and then brought back, the counter stops at around 7-8 seconds and only resumes counting after returning to the foreground. Expectation: The counter should continue running even if Safari goes into the background.

Enabling Private Relay seems to block XHR in Safari from reaching a local HTTPS server hosted by an iOS app, though it works in other browsers. Before (working): JS → https://local.example.com → 127.0.0.1 → OK After (blocked / no DNS reply probably): JS → https://local.example.com → ERR Is there any way to restore local domain access or mitigate this issue?

iOS 26 (from beta 1 to beta 2) We have a VPN app that installs a per-app VPN profile with SafariDomains to filter Safari network traffic. This setup works as expected on iOS versions lower than 26.0. See here more details on SafariDomains: https://developer.apple.com/business/documentation/Configuration-Profile-Reference.pdf On iOS 26, all SafariDomains configured to go through the per-app VPN result in the following error: "Safari can’t open the page. The error was: Unknown Error" Additional Details: Only SafariDomains encounter this error. Other managed apps traffic through the per-app VPN works correctly. Steps to Reproduce: Install the VPN app with a per-app VPN profile. Configure SafariDomains with any URL (e.g., example.com). Open Safari and navigate to the configured URL. Example Configuration: We tested with a simple example by adding only one URL to SafariDomains (example.com). Logs from the console were captured at the moment Safari opened and encountered the error. safari_google2.txt Has anyone else encountered this issue on iOS 26? Any insights or solutions would be greatly appreciated. Thank you!

現在新しいWebViewを使ってwebページを読み込むiPadプログラムを作成中ですが、読み込んだ後に部分のボタンをタップしても何も起こりません。safariで通常通りページを開いてボタンをタップするときちんと写真ライブラリ・カメラで撮るなどのポップアップが表示されます。下記がコードです。Webページは単純化のためにのみを配置しています。 struct SwiftUIWebView: View { @State private var webPage = WebPage() private let url = URL(string: "https://www.****.com/")! var body: some View { WebView(webPage) .onAppear { // URLを読み込む webPage.load(URLRequest(url: url)) } } } 何か追加のコードが必要なのでしょうか？

Issue Description I'm developing a hybrid iOS app and encountering WebView bridge communication issues after updating to Xcode 16 with iOS 18 SDK. App Architecture AViewController: Initial view controller displayed at app launch Handles WebView setup and web-to-native bridge communication Pushes BViewController when receiving "B" bridge message from web BViewController: View controller stacked on top of AViewController Managed by navigation controller AViewController's WebView continues bridge communication even when BViewController is active Problem Behavior Xcode 15 (iOS 18): WebView bridge communication in AViewController works normally while BViewController is active Xcode 16 (iOS 18 SDK): Server communication breaks or hangs without response while BViewController is active Communication resumes only after popping back to AViewController from BViewController Questions Is the current architecture (configuring WebView in AViewController and maintaining bridge communication through AViewController's WebView while BViewController is presented) not a recommended pattern? Is Xcode 16's iOS 18 SDK the cause of this issue? If so, could you help me understand which specific changes are affecting this behavior? This is urgent as we need to deploy soon. I would greatly appreciate a prompt response.

We are seeing an issue in Safari on iOS 26 where the a automatic unfocus of on select box dismisses the second one. <select name="choice1" onblur="console.log('onblur1');" onfocus="console.log('onfocus1');"> <option value="first">First Value</option> <option value="second" selected>Second Value</option> <option value="third">Third Value</option> </select> <select name="choice2" onblur="console.log('onblur2');" onfocus="console.log('onfocus2')"> <option value="first">First Value</option> <option value="second" selected>Second Value</option> <option value="third">Third Value</option> </select> select something in choice1. quickly tap choice2 before onblur1 is logged. At the timing of onblur1 the selection menu for choice2 is dismissed. Anyone know how to fix this behavior?

Hi! I'm trying to implement ASWebAuthenticationSession to log in to my app via the web app backend. However, I'm a bit confused about the cookies that this has access to. When I set prefersEphemeralWebBrowserSession=false it does not seem to use the cookies from Safari. Or at least, I'm logged into my web app in Safari, but when I use ASWebAuthenticationSession I still have to log in again. Does it not share session cookies with Safari? I did notice that if I don't use an ephemeral session, once I log out and try to log back in my app does automatically log me in but that's actually unhelpful in my opinion because now I have no way to clear that session because it only lives in the ASWebAuthenticationSession context. If that's the case I may as well use the ephemeral session then because it seems to have only drawbacks.

Please! is there an app or anything I can do ive posted multiple times. Ive researched all that I can even with screen time on and web limits it still lets u swipe to delete history! Yes it’s grayed out but u can still swipe and delete it!!

Hi, I’m trying to detect whether my Safari Web Extension is running in Safari or Safari Technology Preview. Is there a reliable way to do that? I can get the executable path of the parent process using proc_pidpath(). However, unlike Chrome or Firefox, Safari extensions run under /sbin/launchd as the parent process, not the responsible process (browser’s binary). In this scenario, I need the executable path of the actual browser process, but I haven’t found a way to get it. Also, Safari doesn’t implement the Web Extension API’s browser.runtime.getBrowserInfo(), unlike Firefox. I haven’t tested it yet, but I’m considering checking the user agent string, though I’m not sure how reliable that would be. Use Case Some users use my Safari extension as a web development tool and want to enable some features exclusively in Safari Technology Preview, while using other features only in standard Safari. If I could detect which browser is in use, I could provide the appropriate functionality for them.

I'm developing an application that makes use of a WebView. When resuming the app I occasionally run into an issue where the application just shows as a blank page. In the Console.app I see a stack trace, however the details are hidden (see below). The stack trace is thrown from JavaScriptCore. default 13:37:07.029261+0200 outlinerrs_dioxus 1 0x1b80cd678 <private> default 13:37:07.029360+0200 outlinerrs_dioxus 2 0x1b7d50e30 <private> default 13:37:07.029369+0200 outlinerrs_dioxus 3 0x1047ec800 <private> default 13:37:07.029539+0200 outlinerrs_dioxus 4 0x1b7d37924 <private> default 13:37:07.029548+0200 outlinerrs_dioxus 5 0x1b8102a78 <private> default 13:37:07.029789+0200 outlinerrs_dioxus 6 0x1b8100cb8 <private> default 13:37:07.029834+0200 outlinerrs_dioxus 7 0x1b7ba7b0c <private> default 13:37:07.029851+0200 outlinerrs_dioxus 8 0x1b879a520 <private> default 13:37:07.029870+0200 outlinerrs_dioxus 9 0x1b817f204 <private> default 13:37:07.030159+0200 outlinerrs_dioxus 10 0x1b76bfce8 <private> default 13:37:07.030186+0200 outlinerrs_dioxus 11 0x1b76ad838 <private> default 13:37:07.030245+0200 outlinerrs_dioxus 12 0x1b76bd76c <private> default 13:37:07.030324+0200 outlinerrs_dioxus 13 0x1b22c827c <private> default 13:37:07.030424+0200 outlinerrs_dioxus 14 0x1b22c8034 <private> default 13:37:07.030461+0200 outlinerrs_dioxus 15 0x19d6df230 <private> default 13:37:07.030514+0200 outlinerrs_dioxus 16 0x19d6df1a4 <private> default 13:37:07.030584+0200 outlinerrs_dioxus 17 0x19d6bcc6c <private> default 13:37:07.030592+0200 outlinerrs_dioxus 18 0x19d6928b0 <private> default 13:37:07.030601+0200 outlinerrs_dioxus 19 0x19d691c44 <private> default 13:37:07.030607+0200 outlinerrs_dioxus 20 0x23ca6e498 GSEventRunModal default 13:37:07.030675+0200 outlinerrs_dioxus 21 0x1a300cddc <private> default 13:37:07.031049+0200 outlinerrs_dioxus 22 0x1a2fb1b0c UIApplicationMain default 13:37:07.031064+0200 outlinerrs_dioxus 23 0x104a76278 <private> default 13:37:07.031070+0200 outlinerrs_dioxus 24 0x1047a0064 <private> default 13:37:07.031254+0200 outlinerrs_dioxus 25 0x104781efc <private> default 13:37:07.031343+0200 outlinerrs_dioxus 26 0x1047493e0 <private> default 13:37:07.031352+0200 outlinerrs_dioxus 27 0x10477e1c8 <private> default 13:37:07.031358+0200 outlinerrs_dioxus 28 0x1047a0184 <private> default 13:37:07.031373+0200 outlinerrs_dioxus 29 0x1047a033c <private> default 13:37:07.031409+0200 outlinerrs_dioxus 30 0x104733724 <private> default 13:37:07.031451+0200 outlinerrs_dioxus 31 0x104464e98 <private> I tried to create com.apple.WebKit.plist in /Library/Preferences/Logging/Subsystems with the following contents: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>DEFAULT-OPTIONS</key> <dict> <key>Enable-Private-Data</key> <true/> </dict> </dict> </plist> Does anyone know how to reveal the hidden logs?

updateDynamic rules is blocking ads on my device with iOS 17.4, but on my iOS 18 device the same code is not blocking ads. Is this a known issue?

I have a local HTML file used to display mixed content with images and text. Here's the issue: the same file displays everything correctly in Google Chrome, showing both images and text as expected. However, when opened in Safari, only the text is shown—images are missing, which is very strange. Interestingly, if I remove .png from the title attribute of the tag, the images show up properly in Safari. Alternatively, if I comment out the inclusion of html2canvas.min.js, the images also display correctly (although the layout breaks without it). I'm not sure if this is a Safari-specific issue. Can anyone explain what might be causing this problem?

Hello, I’m working on a cross-origin WebAuthn implementation where a parent page embeds an iframe from a different origin to perform authentication. According to the WebAuthn Level 3 spec (Section 7.1.1), when crossOrigin is true, the clientDataJSON may include topOrigin—but Safari does not seem to populate this field. Observed Behavior: Chrome/Firefox: Include topOrigin in clientDataJSON when crossOrigin: true. Safari (macOS/iOS): Omits topOrigin even though crossOrigin is correctly set to true. Example clientDataJSON from Safari: { "type": "webauthn.get", "challenge": "...", "origin": "https://iframe-origin.example.com", "crossOrigin": true // Missing `topOrigin` (expected: parent origin) } Questions: Is this an intentional omission in Safari for privacy/security reasons? Are there specific requirements (e.g., HTTP headers, permissions policies) needed for Safari to expose topOrigin? Is there a known workaround to reliably obtain the top-level origin in cross-origin WebAuthn flows? System Info: Version 18.4 (20621.1.15.11.10) OS: Sequoia Version 18.4 (20621.1.15.11.10) Reproduction Steps: Parent page (https://parent.example.com) embeds an iframe (https://webauthn-rp.example.com). The iframe calls navigator.credentials.get() with a WebAuthn challenge. Safari returns clientDataJSON with crossOrigin: true but no topOrigin. Code Snippet (iframe): const credential = await navigator.credentials.get({ publicKey: { challenge: new Uint8Array(/* ... */), rpId: 'webauthn-rp.example.com', allowCredentials: [], hints: [], userVerification: "preferred", } }); console.log(JSON.parse(atob(credential.response.clientDataJSON))); Has anyone encountered this? Any insights would be greatly appreciated!