Hi, I recently updated to ios 18. And yes the music is playing in background with camera app. But unable to play music with notes app open

Hello, I'm getting an unknown, never-before-seen error at application launch, when running my iOS SpriteKit game on the iOS 18 arm64 simulator from Xcode 16.0 (16A242d) — AudioConverterOOP.cpp:847 Failed to prepare AudioConverterService: -302 This is occurs on all iOS 18 simulator devices, between application(_:didFinishLaunchingWithOptions:) and the first applicationDidBecomeActive(_:) — the SKScene object may have been already initialized by SpriteKit, but the scene's didMove(to:) method hasn't been called yet. Also, note that the error message is being emitted from a secondary (non-main) thread, obviously not created by the app. After the error occurs, no SKScene is able to play audio — this had never occurred on iOS versions prior to 18, neither on physical devices nor on the simulator. Has anyone seen anything like this on a physical device running 18? Unfortunately, at the moment I cannot test myself on an 18 device, only on the simulator... Thank you, D.

I have a text-to-speech app that generates speech using non-Apple technology. My users are requesting to use it for phone and FaceTime calls. Is there any way I can play generated audio through a phone or FaceTime call?

Hello! I’m making an app which will have a waveform of the frequency of what’s playing on a Mac. The question is whether it is possible to have access to the signal of the media and use it with the FFT?

Hello everyone, I'm new to Core Audio and still haven't found my footing. I'm learning how to capture audio from the default device, using Audio Units. On my MacBook, the default audio input is mono. But when I write a piece of code to capture audio using AUHAL, I'm discovering that I need to provide an AudioBufferList with two channels, not one. Also, when I try to capture audio from an audio interface with 20 audio inputs, I must provide an AudioBufferList with two channels, and not with 20 channels. To investigate the issue, I wrote a small diagnostic program, which opens the default audio device and probes it for the number of channels. Depending on which way I'm probing, I'm getting different results. When I probe the stream format, I'm getting information that there is 1 channels. But when I probe the input audio unit, I'm getting information that there are 2 input channels. Here's my program to demonstrate the issue: // InputDeviceChannels.m // Compile with: // clang -framework CoreAudio -framework AudioToolbox -framework CoreFoundation -framework AudioUnit -o InputDeviceChannels InputDeviceChannels.m // // On my system, this prints: // Device Name: MacBook Pro Microphone // Number of Channels (Stream Format): 1 // Number of Elements (Element Count): 2 #import <AudioToolbox/AudioToolbox.h> #import <AudioUnit/AudioUnit.h> #import <CoreAudio/CoreAudio.h> #import <Foundation/Foundation.h> void printDeviceInfo(AudioUnit audioUnit) { UInt32 size; OSStatus err; AudioStreamBasicDescription streamFormat; size = sizeof(streamFormat); err = AudioUnitGetProperty(audioUnit, kAudioUnitProperty_StreamFormat, kAudioUnitScope_Input, 1, &streamFormat, &size); if (err != noErr) { printf("Error getting stream format\n"); exit(1); } int numChannels = streamFormat.mChannelsPerFrame; UInt32 elementCount; size = sizeof(elementCount); err = AudioUnitGetProperty(audioUnit, kAudioUnitProperty_ElementCount, kAudioUnitScope_Input, 0, &elementCount, &size); if (err != noErr) { printf("Error getting element count\n"); exit(1); } printf("Number of Channels (Stream Format): %d\n", numChannels); printf("Number of Elements (Element Count): %d\n", elementCount); } void printDeviceName(AudioDeviceID deviceID) { UInt32 size; OSStatus err; CFStringRef deviceName = NULL; size = sizeof(deviceName); err = AudioObjectGetPropertyData( deviceID, &(AudioObjectPropertyAddress){kAudioDevicePropertyDeviceNameCFString, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMain}, 0, NULL, &size, &deviceName); if (err != noErr) { printf("Error getting device name\n"); exit(1); } char deviceNameStr[256]; if (!CFStringGetCString(deviceName, deviceNameStr, sizeof(deviceNameStr), kCFStringEncodingUTF8)) { printf("Error converting device name to C string\n"); exit(1); } CFRelease(deviceName); printf("Device Name: %s\n", deviceNameStr); } int main(int argc, const char *argv[]) { @autoreleasepool { OSStatus err; // Get the default input device ID AudioDeviceID input_device_id = kAudioObjectUnknown; { UInt32 property_size = sizeof(input_device_id); AudioObjectPropertyAddress input_device_property = { kAudioHardwarePropertyDefaultInputDevice, kAudioObjectPropertyScopeGlobal, kAudioObjectPropertyElementMain, }; err = AudioObjectGetPropertyData(kAudioObjectSystemObject, &input_device_property, 0, NULL, &property_size, &input_device_id); if (err != noErr || input_device_id == kAudioObjectUnknown) { printf("Error getting default input device ID\n"); exit(1); } } // Print the device name using the input device ID printDeviceName(input_device_id); // Open audio unit for the input device AudioComponentDescription desc = {kAudioUnitType_Output, kAudioUnitSubType_HALOutput, kAudioUnitManufacturer_Apple, 0, 0}; AudioComponent component = AudioComponentFindNext(NULL, &desc); AudioUnit audioUnit; err = AudioComponentInstanceNew(component, &audioUnit); if (err != noErr) { printf("Error creating AudioUnit\n"); exit(1); } // Enable IO for input on the AudioUnit and disable output UInt32 enableInput = 1; UInt32 disableOutput = 0; err = AudioUnitSetProperty(audioUnit, kAudioOutputUnitProperty_EnableIO, kAudioUnitScope_Input, 1, &enableInput, sizeof(enableInput)); if (err != noErr) { printf("Error enabling input on AudioUnit\n"); exit(1); } err = AudioUnitSetProperty(audioUnit, kAudioOutputUnitProperty_EnableIO, kAudioUnitScope_Output, 0, &disableOutput, sizeof(disableOutput)); if (err != noErr) { printf("Error disabling output on AudioUnit\n"); exit(1); } // Set the current device to the input device err = AudioUnitSetProperty(audioUnit, kAudioOutputUnitProperty_CurrentDevice, kAudioUnitScope_Global, 0, &input_device_id, sizeof(input_device_id)); if (err != noErr) { printf("Error setting device for AudioUnit\n"); exit(1); } // Initialize AudioUnit err = AudioUnitInitialize(audioUnit); if (err != noErr) { printf("Error initializing AudioUnit\n"); exit(1); } // Print device info printDeviceInfo(audioUnit); // Clean up AudioUnitUninitialize(audioUnit); AudioComponentInstanceDispose(audioUnit); } return 0; } It prints: Device Name: MacBook Pro Microphone Number of Channels (Stream Format): 1 Number of Elements (Element Count): 2 I tried to set the number of channels to 1 on the input unit, but it didn’t change anything. After calling setNumberOfChannels(1, audioUnit), I’m still getting the same output. Note 1: I know that I can ignore one channel, etc, etc. My purpose here is not to "somehow get it to work", I already did that. My purpose is to understand the API, so that I'll be able to write code that handles any number of audio inputs. Note 2: I already read a bunch of documentation, especially this here: https://developer.apple.com/library/archive/technotes/tn2091/ - perhaps the channel map could help here, but I can’t make sense of it - I tried to use it based on my understanding but I only got the -50 OSStatus. How should I understand this? Is it that that audio unit is an abstraction layer and automatically converts mono input into stereo input? Can I ask AUHAL to provide me the same number of input channels that the audio device has?

Just installed iOS 18 Beta 3. I am seeing my AccessibilityUIServer using the microphone and this is causing no notification sounds, inability to use Siri by voice and volume is grayed out. If I start to play anything with sound AccessibilityUIServer releases the microphone and I am able to use the app. Calls still work since AccessibilityUIServer will release and the phone will ring. Feed back ID is FB14241838.

I often find when doing basic actions in MusicKit it is incredibly slow compared to Apple's Music App. I've tried different versions, devices, networks, Apple's sample code, it all throughout the last several years, and it is all the same. Does anyone else have this issue?

Is there a way to implement controls for background audio using ActivityKit like in the Apple Music application? I didn't found anything in your documentation about handling actions like this except deep links, but they're not suitable for this use case

Does anyone have a working example on how to play OGG files with swift? I've been trying for over a year now. I was able to wrap the C Vorbis library in swift. I then used it to parse an OGG file successfully. Then I was required to use Obj-C&#92;&#43;+ to fill the PCM because this method seems to only be available in C&#92;&#43;+ and that part hangs my app for a good 40 seconds to several minutes depending on the audio file, it then plays for about 2 seconds and then crashes. I can't get the examples on the Vorbis site to work in objective-c and i tried every example on github I could find (most of which are for iOS - I want to play the files on mac) I also tried using Cricket Audio framework below. https://github.com/sjmerel/ck It has a swift example and it can play their proprietary soundbank format but it is also supposed to play OGG and it just doesn't do anything when trying to play OGG as you can see in the posted issue https://github.com/sjmerel/ck/issues/3 Right now I believe every player that can play OGGs on mac is written in Objective-C or C++. Anyway, any help/advice is appreciated. OGG format is very prevalent in the gaming community. I could use unity, which I believe plays oggs through the mono framework but I really really want to stay in swift.