We’re looking for best practices to remotely update iOS apps that are deployed in Single App Mode (SAM) or Autonomous Single App Mode (ASAM), managed through MDM. Imagine a typical use case: an iPad installed as a self-service kiosk at an airport restaurant. We need to update the app periodically without: Displaying any prompts to the user Relying on the user to approve or initiate the update (since the device is unattended) Sending technicians onsite, as many devices are in remote locations MDM providers have stated, “This is how Apple handles it,” without offering a workable solution. We’re hoping someone here has experience or suggestions for: Seamless or silent app updates in SAM/ASAM Update workflows that avoid interruptions or user interaction Any proven strategies or automation options under MDM supervision Any insight or documented approaches would be greatly appreciated. Thank you!

m personal iPhone is managed by an Unauthorized and Unknown mdm management team, The profile isn’t showing up in VPN Settings and I can’t remove them from having Remote access and control over my Personal Device! I’ve SPENT MANY MONTHS TRYING TO GET SUPPORT VIA EMAILING APPLE DEVELOPER AND SPEAKING TO APPLE SUPPORT WHICH HAS BEEN EXTREMELY EXHAUSTING AND HUMILIATIN! I’ve resorted to contacting Internet crime websit, the federal trade commissio, Better business bureau and Consumer Affairs to file an online complaint against Apple for not complying with their Security and Privacy policy for consumers accounts! Because of this unauthorized and unknown mdm device management profile I don’t have COMPLETE CONTROL OVER MY OWN IPHONE! ! Unable to find a team with the given Team II 'L95TAW5KWP' to which you belong. Pleas Developer Program Support. https://developer.apple.com/support I contacted developer support via email and also tried calling but they don’t respond!

Three months ago I molded a mold program. I believe could be tweaked and tried unlined zero code. swear. anyway I would like to scale with some people if I can go to commercial area code phoned series and calls.and if I have rights. but my next moves for them. on iOS I think they should have a seri settings. where they can call seri.on settings, and it jump many codes-and navigation is hard. plus I think seri can help in settings expecially since seri settings is verbal drop. if the words fit or are similar it cues goes to but you have to hard call the switch.so there’s no hey no Sami where you setting no Sammy right I think it could skip cauldron and everything verbally either. Seri settings I think iOS should try it.

how can i generate MDM Push Certificate for my own MDM server. Please guide me on that.

Hello all, We have built our own MDM solution as we plan to support quite a few devices running iOS. Manual activation is running fine and devices are checking in. We have setup ABM with Device management service setup and linked to our MDM. We have added reseller via Apple customer number and purchased devices are showing in ABM. We have setup default management service assignment as well. When we are setting up a device it gives an error: Remote Management The configuration for your iPhone could not be downloaded from . cancelled Error in the device log is as follows: Jun 11 14:16:36 iPhone Setup(DMCUtilities)[626] : <DMCHTTPRequestor: 0x84cfd7d40> cannot accept the authentication method NSURLAuthenticationMethodClientCertificate Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Task <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1> auth completion disp=2 cred=0x0 Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Task <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1> summary for task failure {transaction_duration_ms=285, response_status=-1, connection=7, reused=1, reused_after_ms=0, request_start_ms=0, request_duration_ms=0, response_start_ms=0, response_duration_ms=0, request_bytes=0, request_throughput_kbps=0, response_bytes=0, response_throughput_kbps=0, cache_hit=false} Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: TLS Client Certificates encountered error 1:89 Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Task <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1> finished with error [-999] Error Domain=NSURLErrorDomain Code=-999 UserInfo={NSErrorFailingURLStringKey=, NSErrorFailingURLKey=, _NSURLErrorRelatedURLSessionTaskErrorKey=, _NSURLErrorFailingURLSessionTaskErrorKey=, NSLocalizedDescription=} Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: encountered error(1:89) Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: cleaning up Jun 11 14:16:36 iPhone Setup(CFNetwork)[626] : Connection 7: summary for unused connection {protocol="http/1.1", domain_lookup_duration_ms=0, connect_duration_ms=0, secure_connection_duration_ms=0, private_relay=false, idle_duration_ms=0} Jun 11 14:16:36 iPhone Setup(DMCUtilities)[626] : <DMCHTTPRequestor: 0x84cfd7d40> failed to communicate with the MDM server. Error: NSURLError:Desc : cancelled Domain : NSURLErrorDomain Code : -999 Extra info: { NSErrorFailingURLKey = "https://mdm.domainname/enroll"; NSErrorFailingURLStringKey = "https://mdm.domainname/enroll"; "_NSURLErrorFailingURLSessionTaskErrorKey" = "LocalDataTask <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1>"; "_NSURLErrorRelatedURLSessionTaskErrorKey" = ( "LocalDataTask <663D2346-4B73-4DB2-A134-B1A7DC58E70B>.<1>" ); }

This test setup is Jamf Pro as the MDM with Entra as the IdP. PSSO is working on Sequoia devices. Prior to Tahoe, PSSO required the following three items: An existing local account, the delivery of Company Portal, and a profile containing PSSO payload. Based on the Tahoe announcement, it looks like PSSO is now available during Setup Assistant, removing the requirement of first creating a local account. I assume this means that the requirements now as easy as deploying Company Portal and the PSSO profile during the Pre-Stage policy. I attempted this on the macOS 26 beta 1 and during Setup Assistant, with the PSSO profile delivered, Setup Assistant prompts me to login to my IdP. However, pressing Continue will result in a failure, notifying me that the application required is not available. The continue button is now inactive but a "try again" button is available. This results in the loop of trying and then failing, stating that the required application is not available. I eventually must quit Setup Assistant which exits it and drops me at the login window. The only account that is visible is the management account. A trip into DFU and an IPSW restore then follows. Am I trying this too soon? Is PSSO at Setup Assistant not yet fully supported? Is there another requirement other than delivering Company App in the prestige alongside the profile? I've enabled the beta channel in MAU but there is no newer Company Portal being offered. Any guidance here would be appreciated as this is the PSSO announcement I've been waiting for since the deprecation of Apple Enterprise Connect.

This is in reference to the feedback ticket : https://feedbackassistant.apple.com/draft/57929340, we would like to know if there are any test enterprise websites that Apple can suggest to test passkeys declaration.

How to test ManagedAppConfigurationProvider without MDM ? Task { /* Configuration provider task */ for await configuration in configurationProvider.configurations(MyAppConfiguration.self) { self.configuration = configuration ?? MyAppConfiguration.defaultConfiguration } } Can the existence of a configuration be simulated, e.g. by storing a mocked configuration in UserDefaults? The UserDefaults key "com.apple.configuration.managed" seems not relevant here.

I'm the IT Admin in my company. We use Microsoft Intune, which is a Mobile Device Management tool, to manage our devices and apps. I created an app protection policy, restricting the data can only be shared between the allowed apps. For example, if our user want to copy the content in Outlook for iOS to WeChat or personal memo, the action will be blocked. However, may be it's too strict, here is the scenario that we need to hadle: A user selected the content in the Outlook for iOS mail, and wanted to use the "translate" function to do translation. Before the app protection policy was deployed, he can do the translation successfully. And now, it's blocked. Therefore, we need to find a way to exempt the app "Translate" so that users can do the translation successfully. We put the value "com.apple.Translate"(this is a package ID listed in the official document of Apple) to the exemption, but it's not working. May I know what is the correct "value" for the iOS native Translate APP? I need to put this value to our app protection policy to exempt Translate app. Thank you so much.

We are going to replace our iPhone SE to iPhone 16e. The issue is that we are unable to install an in-house app on the new iPhone 16e. The app works on the iPhone SE Both phones run on the same iOS version (18.5) Has anyone else experienced the same issue? I initially thought the iPhone 16e was the successor to the iPhone SE

I have created a jwt token with headers { 'typ': 'JWT', 'alg': 'RS256' } and claim as : { 'iss': dep server UUID from Accounts call, 'iat': epoc time in seconds, 'jti': random uuid, 'service_type': 'com.apple.maid' } And signed the token with private key created during DEP MDM server creation. On the device I see Verification error when tried to login with Managed Apple account. In ABM, Access management setting was set to Managed Devices /Supervised only. Any help would be appreciated.

Apple iPad Air device failing to enroll through ABM with "failed to retrieve configuration" error. This error occurs while reaching Apple ABM for fetching MDM server enrollment details. When we checked console logs when enrolling the device we found following error: ​default 13:54:07.229022+1000 teslad Error: Error Domain=MCCloudConfigurationErrorDomain Code=34004 "The cloud configuration server is unavailable or busy." UserInfo={NSLocalizedDescription=The cloud configuration server is unavailable or busy., CloudConfigurationErrorType=CloudConfigurationFatalError} default 13:54:07.229120+1000 Setup Service completed default 13:54:07.230096+1000 Setup Could not retrieve cloud configuration. Error: <Error domain: MCCloudConfigErrorDomain, code 33001>\ Feedback raised along with screenshot and console logs as well : FB17785513. Please analyse this issue and reply back to us.

We have couple of devices that are registered into Platform SSO, and we have been noticing an issue when the user tried to login. After the users enters the password and hit the return key nothing happens, they need to hit the return key probably 10-15 times in order for the login to happen, the password entered is the correct one and it's just that hitting the return key doesn't invoke the login. On checking the log of the device one unusual thing that we noticed as compared to a different device where the login is working in a single go is that the AppSSOAgent or AppSSODaemon process were not getting invoked

In Device management profile, VPN.VPN.OnDemandRulesElement Action->Disconnect Example payload: OnDemandEnabled1OnDemandRules ActionDisconnectInterfaceMatchCellular When install my vpn payload with above configuration, I was unable to connect vpn manually when i try with wifi interface Based on the doc, VPN should tear down when i connect with specific type interface(here cellular) i was unable to connec the vpn when i'm in cellular network good but when i connect to wifi still the same is happening. Is this a bug? tried in ios 18

I'm working on the companion iOS app for my purpose-built MDM system. when I use the following in a .swift file: import DeviceManagement I get the build issue: No such module 'DeviceManagement' When I attempt to add the framework in the Frameworks, Libraries, and Embedded Content settings, DeviceManagement doesn't even show up in the available frameworks. Alll the documentation I can find suggests that is the correct framework to import, but I'm new to this and not sure if I'm just missing something. Some AI help is suggesting that the culprit might be v16.x of Xcode, but I don't know enough to prove that correct or not. Any ideas on why Xcode believes there is no such module? Is there documentation that might help me learn how to make that framework available for my project?

We are currently working on a SCEP server implementation that operates in FIPS-approved mode. In this mode, RSA PKCS#1 v1.5 encryption is disallowed due to compliance requirements, and only FIPS-approved padding schemes such as RSA-OAEP are permitted. However, we have observed that the SCEP client functionality on Apple devices currently does not support RSA-OAEP for CMS EnvelopedData decryption. This creates a challenge for us in ensuring FIPS compliance while maintaining compatibility with Apple devices during certificate enrollment through SCEP. We would appreciate your guidance on the following: Are there any alternative FIPS-approved encryption algorithms or configurations supported by Apple devices for SCEP CMS EnvelopedData decryption? Is there any plan or timeline for future support of RSA-OAEP on Apple platforms for this use case? Feedback raised along with sysdiagnose logs as well : FB17655410

Hello, we use an MDM profile that enables FDA for our program. The Identifier is set to be the path to our program. We'd like to have a profile that allows multiple CodeSignatures. Our older programs are signed with a different certificate than the current ones. We tried deploying 2 profiles (one for the 'old certificate' signed binary and the other for the 'new certificate' signed binary). But it looks like that MacOS accepts only one. I have also tried to use ProfileCreator to generate a profile with 2 entries, but it fails to do it. Manually editing the XML file and adding new entries does not work either. I'd like to know if there's a workaround for this issue.

On a supervised device running iOS 18 without any AirDrop restrictions applied, when a profile with allowListedAppBundleIDs restriction key is installed, the AirDrop sound plays. But still the accept prompt does not appear, making it impossible to accept files. The prompt works as expected on iOS 18 devices to which the allowListedAppBundleIDs restriction is not installed. This issue occurs only on supervised iOS 18 devices to which the allowListedAppBundleIDs restriction is being applied. Device must be in iOS 18 version > Install the (allowListedAppBundleIDs restriction) profile with the device > Try to AirDrop files to the managed device. The expected result is that the accept prompt must pop up but it does not appear. This issue is occurring irrespective of any Whitelisted bundle ID being added to the allowListedAppBundleIDs restriction profile. Have attached a few Whitelisted bundle ID here com.talentlms.talentlms.ios.beta, com.maxaccel.safetrack, com.manageengine.mdm.iosagent, com.apple.weather, com.apple.mobilenotes, gov.dot.phmsa.erg2, com.apple.calculator, com.manageengine.mdm.iosagent, com.apple.webapp, com.apple.CoreCDPUI.localSecretPrompt etc. Have raised a Feedback request (FB15709399) with sysdiagnose logs and a short video on the issue.

There could be a case where-in multiple transparent proxies might exist in the system (for ex., Cisco AnyConnect, GlobalProtect, etc). We want to know if there is a way to order transparent proxies so that the desired transparent proxy gets the request first. During our research, we found a resource which talks about ordering transparent proxies through MDM. https://developer.apple.com/documentation/devicemanagement/vpn/transparentproxy Using this reference, we tried to create a profile and push it through JAMF. Below is the profile that we created and pushed with JAMF. Property List - &lt;?xml version="1.0" encoding="UTF-8"?&gt; &lt;!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"&gt; &lt;plist version="1.0"&gt; &lt;dict&gt; &lt;key&gt;TransparentProxy&lt;/key&gt; &lt;array&gt; &lt;dict&gt; &lt;key&gt;ProviderBundleIdentifier&lt;/key&gt; &lt;string&gt;com.paloaltonetworks.GlobalProtect.client.extension&lt;/string&gt; &lt;key&gt;Order&lt;/key&gt; &lt;string&gt;1&lt;/string&gt; &lt;/dict&gt; &lt;dict&gt; &lt;key&gt;ProviderBundleIdentifier&lt;/key&gt; &lt;string&gt;com.cisco.anyconnect.macos.acsockext&lt;/string&gt; &lt;key&gt;Order&lt;/key&gt; &lt;string&gt;2&lt;/string&gt; &lt;/dict&gt; &lt;dict&gt; &lt;key&gt;ProviderBundleIdentifier&lt;/key&gt; &lt;string&gt;com.mydomain.transparentproxy&lt;/string&gt; &lt;key&gt;Order&lt;/key&gt; &lt;string&gt;3&lt;/string&gt; &lt;/dict&gt; &lt;/array&gt; We are not sure if this is the right way to create the profile, though JAMF is not throwing any error while pushing this profile. We see this profile on the local machine as "/Library/Managed Preferences/com.apple.networking.vpn-transparent-list.plist". Is there a way to know if the profile took effect and the order of transparent proxies has changed. Thanks in advance.

Hello, I’ve run into an issue with a configuration profile on my supervised iPhone. I’m wondering if anyone here might be able to help? The profile contains the allowListedAppBundleIDs key within the restrictions payload. My Apple Watch is paired with the iPhone. The iPhone was supervised manually with Apple Configurator, hence the Apple Watch has not been directly supervised itself. The profile works completely as expected when installed on the phone. As soon as the profile is installed on the iPhone, I can witness the apps on the Apple Watch rearrange themselves as some apps are hidden. So clearly the profile is applying its restrictions to the Apple Watch to some degree. My issue however is that apps listed in the whitelist are hidden from the Watch. The apps that are missing from my Watch are Walkie Talkie, Find My Items, Find My Friends, Messages, Alarm, Remote, Now Playing, Sleep, Meditation and Heart Rate. This is despite the following bundle IDs being listed in the whitelist array: com.apple.findmy.findpeople, com.apple.findmy.finddevices, com.apple.HeartRate, com.apple.SessionTrackerApp, com.apple.NanoWorldClock, com.apple.findmy.finditems, com.apple.Mind, com.apple.NanoOxygenSaturation, com.apple.watchmemojieditor com.apple.NanoSleep com.apple.NanoNowPlaying com.apple.noise com.apple.tincan com.apple.NanoRemote com.apple.NanoAlarm com.apple.private.NanoTimer com.apple.NanoStopwatch I’ve done some testing, but not sure what I’ve found really. I’ve so far identified 3 scenarios. Scenario 1: I have the whitelist profile installed on the iPhone. I download an app that appears in the whitelist from my watch (or at least its iPhone version does). The apps show up on the iPhone automatically and can be launched there. These apps cannot be launched on the watch. Scenario 2: I downloaded a few apps to my watch, that didn’t automatically install on my iPhone at the same time. They were on the whitelist. These ones couldn’t be launched from my Watch. I then downloaded them to the iPhone and they could be launched there (since they were on the whitelist). Scenario 3: A couple of 3rd party apps on the whitelist could be downloaded and launched from the watch with the whitelist installed. It seems as though there are different kinds of Apple Watch app and this is what I’ve read elsewhere. First of all there are Watch-only apps, which do not automatically install a companion iPhone app. Secondly there are companion apps, which when installed from the Watch App Store download their companion app to the iPhone in the background. Someone please correct me - I’m bound to be overlooking something here. So maybe the apps that when installed from Watch automatically install on iPhone and can only be launched from the iPhone have a separate bundle ID for their Watch app which I haven’t included? Apps that are on the whitelist AND do not automatically install an iPhone app AND can be launched from the Watch, include: solstice What3words So maybe these do not need a companion app, but have the same Bundle ID as their iPhone app? However, I’m still not sure why many stock Apple Watch apps are missing from the Watch…. The most obvious answer is that I’ve got their Bundle IDs wrong, but I don’t think I have given I extracted the bundle IDs from the App Store pages of the Apple WatchOS apps. I noticed at this Apple Support page (https://support.apple.com/en-gb/guide/deployment/dep34c5cd30f/1/web/1.0) that there is no mention of whitelisting or blacklisting apps on WatchOS using MDM, yet something definitely happens on the watch when the configuration profile is installed on the iPhone. Furthermore, if I tap on a configuration profile, which comprises a blacklist, on my iPhone it will ask me if I want to install it on the iPhone or Watch. The same pop-up question doesn’t happen when the profile contains a whitelist. All this to say, I’m massively confused as to why I can’t get this working. I’d really appreciate anyone’s advice which is bound to be expert. Thank you