We’re exploring the use of Apple’s Automatic Assessment Configuration entitlement for an iOS app currently in the proof-of-concept stage. We’re enrolled in the Apple Developer Program with an active subscription. Both the Account Holder and team members have accepted all relevant license agreements. However, when we try to access the entitlement request form at: 👉 https://developer.apple.com/contact/request/automatic-assessment-configuration/ We are immediately redirected to: 🚫 https://developer.apple.com/unauthorized/ This happens for all team members, including the Account Holder, so it doesn’t appear to be a role-specific permissions issue. The app is still in the proof-of-concept stage — there’s no App Store listing or App ID yet. We’re trying to confirm entitlement eligibility before proceeding further. Questions: Is an App Store listing or App ID required to access this request form? Are there any hidden prerequisites (account permissions, team roles, prior submissions, etc.) that need to be fulfilled? Has anyone here successfully submitted this form — and if so, what steps or conditions were required? Any guidance or shared experience would be greatly appreciated. Thanks in advance!

We have been trying to figure out how to block Apple Private Relay in our enterprise so we can monitor and filter our employees traffic. We are able to block the Private Relay via this process: We used this article from Fortinet to achieve this: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-block-iCloud-Private-Relay-from-bypassing/ta-p/228629 This also appears to block the users ability to utilize Apple iCloud Drive Backups. They would like to allow that still. Is there a way to block iCloud Private Relay while still allowing iCloud Drive Backups to work? I am not finding a document listing the URL requirements for iCloud Drive Backups. We currently have this solution in place: https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-allow-iCloud-private-relay/ta-p/383703 Basically this solution is allowing all Apple URL/IPs to go through the firewall and not be filtered. They would like to scan the traffic through. When scanning is enabled the firewall blocks the iCloud Private Relay traffic as it is blocked as being a proxy. Any guidance is greatly appreciated.

Platform SSO not working on macos devices for zscaler application other app like safari / chrome working well. Need help from apple expert on the same. Environment : IDP : Entra ID MDM : Omnissa Workspace one UEM platform : macOS

As we know, we can't add restrictions payload in the mobileconfig when registing the device. We are developing MDM by ourselfs, met some trouble. Please help.

Hi We've had an Enterprise Developer a/c for years. But last year they asked a bunch a questions to confirm we were a company. I answered them all and then it said it would review the answers. Were a big company and answered these questions before so just expected it to go through. Then our Enterprise Program a/c was up for renewal in April. But the money was never taken from the company cc and every expiry date the renewal date keeps moving forward a month. Its now been moved to Sep 2025. Either were getting April-Sep free or were going to be landed with a CC bill for 12+5 months soon. Anyone else seeing this. Is there an email or webpage for Enterprise a/c support? We have the money :)

I registered in this summer, uploaded 2 apps. But recently I decided to add iAP to my apps, everything is ready, in Xcode sandbox everything works fine, but when I uploaded new version to TestFlight to test, when I tap on the subscription it says something like "Product not found". (I have added subscriptions to the app, and added them to the version before submitting, also, this version is in status "awaiting developer release" so I can tap a button and this new version with iAPs will be on App Store. But im unsure what to do, because exactly this verified by Apple's version is not working in TestFlight.) In Business section of my Apple Developer Account in Agreements I only have agreement of free apps, but not about the paid apps. 
When I registered I used my (R)(us)sian passport, I think this is the reason that I simply don't even have the agreement of paid apps to accept it. 
I have multiple passports, and multiple EU debit cards. I emailed apple to change the location of my account (to another EU country), but they ghosted me. They sent me emails to upload documents about 4 or 5 times, every time I uploaded my another passport, got an auto email "thank you, we will write you in 2-3 days", but either they did not write me, or they said that the document is not in English (it isn't). 
What do I do? Also, to my situation, someone of my family has a company in (R)(us)sia, and I have in EU (Estonia). Maybe if nothing will work out with "Individual account", I should change to my company? And what is better EU or (R)(us)sian? 
Im new to this community, hope to hear an answer, or just an advice. Thank you!

I've account access level of developer. I want to create app specific password but go through the account but could not get any option to do so. Can somebody help me on this. Thanks in advance.

We are facing an issue with Platform SSO registration on macOS devices for AD-bound user accounts with Microsoft EntraID configuration. We are using the Platform SSO payload on macOS devices integrated with Entra ID, and it works as expected — registration completes successfully, and the password syncs with the Entra ID password. However, when we try the same on macOS devices with AD-bound (mobile) user accounts, the registration does not complete. To elaborate, the process successfully completes the initial WebView authentication but fails at the stage where Apple prompts for the password to sync the local macOS user’s password with the Entra ID password. It does not display any error, and even after entering a valid password, the process does not proceed further. However, when we try the same on a non-AD user account, it works fine. We have checked with Microsoft, and they confirmed that there are no restrictions on their side for AD-bound accounts. Since the issue appears to occur at the Apple system level, they advised us to reach Apple teams on this. Could you please check and let us know how we can proceed with this? Payload used: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>PayloadContent</key> <array> <dict> <key>AuthenticationMethod</key> <string>Password</string> <key>ExtensionIdentifier</key> <string>com.microsoft.CompanyPortalMac.ssoextension</string> <key>PayloadDisplayName</key> <string>Extensible Single Sign-On Payload</string> <key>PayloadIdentifier</key> <string>com.apple.extensiblesso.B408A658-3DAF-41FF-8A5D-AE77B380CB7B</string> <key>PayloadType</key> <string>com.apple.extensiblesso</string> <key>PayloadUUID</key> <string>D506CAFD-C802-41F2-9C3E-DF5289C315FF</string> <key>PayloadVersion</key> <integer>1</integer> <key>PlatformSSO</key> <dict> <key>AccountDisplayName</key> <string>EntraID</string> <key>AuthenticationMethod</key> <string>Password</string> <key>EnableCreateUserAtLogin</key> <true/> <key>LoginFrequency</key> <integer>3700</integer> <key>LoginPolicy</key> <array> <string>AttemptAuthentication</string> </array> <key>NewUserAuthorizationMode</key> <string>Admin</string> <key>UseSharedDeviceKeys</key> <true/> <key>UserAuthorizationMode</key> <string>Admin</string> </dict> <key>ScreenLockedBehavior</key> <string>DoNotHandle</string> <key>TeamIdentifier</key> <string>UBF8T346G9</string> <key>Type</key> <string>Redirect</string> <key>URLs</key> <array> <string>https://login.microsoftonline.com</string> <string>https://sts.windows.net</string> <string>https://login.partner.microsoftonline.cn</string> <string>https://login.chinacloudapi.cn</string> <string>https://login.microsoftonline.us</string> <string>https://login.microsoft.com</string> <string>https://login-us.microsoftonline.com</string> </array> </dict> </array> <key>PayloadDisplayName</key> <string>Platform SSO</string> <key>PayloadIdentifier</key> <string>42GBHOLAP04621.1BD5B6D9-640B-4DC3-9275-56DDD191A5FB</string> <key>PayloadType</key> <string>Configuration</string> <key>PayloadUUID</key> <string>58548FC6-38D9-4B28-9EDF-BEEAB03BAB23</string> <key>PayloadVersion</key> <integer>1</integer> </dict> </plist>

Can I upload custom app onto the ABM? if yes then how can we install it into the user's devices?

We are trying to develop an app that will be responsible for managing 5000+ managed iPads through Intune MDM. The user flow is to have a device locked to a single app when a user is not logged in, but to make the device available to other apps once a user is authenticated. We already tried UIAccessibility GuidedAccess Mode and autonomous single app mode but those were not sufficient due to our need to be able to toggle this from the background. When the device may be asleep. So another way we could achieve this functionality would be to control all app access under a launching mechanism. That way we could allow one app to be visible in our MDM configuration and try to access our business app through that using deep links. If this were to work, we would have to be able to hide an app and still make it launchable from the manager. Any ideas? Thanks

I am checking the response of DeviceInformation Command to collect network information from iPad. On iPad(iPad Pro 11, M4) devices that use WiFi without inserting Usim or Esim, network values ​​such as CurrentMCC and ICCID are received in response to the DeviceInformation command. cf.)Even though it may be garbage value, I blurred the unique information just in case. <key>ServiceSubscriptions</key> <array> <dict> <key>CarrierSettingsVersion</key> <string>61.0</string> <key>CurrentCarrierNetwork</key> <string></string> <key>CurrentMCC</key> <string>450</string> <key>CurrentMNC</key> <string>08</string> <key>EID</key> <string>blah blah</string> <key>ICCID</key> <string>blah balh</string> <key>IMEI</key> <string>blah blah</string> <key>IsDataPreferred</key> <true/> <key>IsRoaming</key> <true/> <key>IsVoicePreferred</key> <false/> <key>Label</key> <string>Provisioning</string> <key>LabelID</key> <string>00000000-0000-0000-0000-000000000000</string> <key>PhoneNumber</key> <string></string> <key>Slot</key> <string>CTSubscriptionSlotOne</string> <key>SubscriberCarrierNetwork</key> <string>iPad</string> </dict> </array> This is a bit weird. If I collect the same information from an iPhone(iPhone 15 Pro Max) that only uses wifi and does not use Usim or Esim, it does not respond with values ​​like ICCID, CurrentMCC, etc. <key>ServiceSubscriptions</key> <array> <dict> <key>IMEI</key> <string>blah blah</string> <key>Slot</key> <string>CTSubscriptionSlotOne</string> </dict> <dict> <key>EID</key> <string>blah blah</string> <key>IMEI</key> <string>blah blah</string> <key>Slot</key> <string>CTSubscriptionSlotTwo</string> </dict> </array> I'm confused by the network information collected. Is there a reason why the collected network information of iPad and iPhone are different?

VPP API v2 returns 9609 "Unable to find the registered user." when I disassociate assets from an existing user. Repro step: 1. Create user POST https://vpp.itunes.apple.com/mdm/v2/users/create { "users": [ { "clientUserId": "client-1", "managedAppleId": "valid managed apple id" } ] } => user is associated 2. Retire user POST https://vpp.itunes.apple.com/mdm/v2/users/retire { "users": [ { "clientUserId": "client-1" } ] } => user is retired 3. Recreate user with the same clientUserId POST https://vpp.itunes.apple.com/mdm/v2/users/create { "users": [ { "clientUserId": "client-1", "managedAppleId": "valid managed apple id" } ] } => user is associated 4. Associate asset POST https://vpp.itunes.apple.com/mdm/v2/assets/associate { "assets": [ { "adamId": "408709785" } ], "clientUserIds": [ "client-1" ] } => asset associated 5. Disassociate asset POST https://vpp.itunes.apple.com/mdm/v2/assets/disassociate { "assets": [ { "adamId": "408709785" } ], "clientUserIds": [ "client-1" ] } => {"errorNumber":9609,"errorMessage":"Unable to find the registered user."} Notes associate API works fine with the same payload. disassociate work with v1 API.

I am having an issue with duplicated SCEP client certificates on an iOS device. We deployed an SCEP profile via MDM, then deleted and redeployed it via MDM. In Settings > General > VPN & Device Management, only one SCEP profile is visible. However, Safari shows duplicated certificates when a server requests a client certificate. We have tried removing the cert profile on MDM and unenrolling the device from MDM, but only the latest certificate got removed, leaving previous ones stuck on the device or in the Safari app. We have found no way to remove these duplicated certificates other than factory reset the devices. This appears to be a potential iOS bug affecting certificate cleanup. We need assistance to resolve this issue. Also, the issue is difficult to reproduce but has happened to a number of our managed devices.

I'm writing to point out a potential structural error in an example of the DeclarativeManagement command. This could cause significant confusion for developers implementing the MDM protocol. The standard structure for a server-to-device MDM command requires CommandUUID and the Command dictionary to be siblings under the top-level dictionary. The CommandUUID serves as a top-level identifier for the entire command envelope. This is the correct, expected structure: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Command</key> <dict> <key>Command</key> <dict> <key>RequestType</key> <string>DeclarativeManagement</string> </dict> </dict> <key>CommandUUID</key> <string>0001_DeclarativeManagement</string> </dict> </plist> This is an example of the incorrect structure I've seen: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Command</key> <dict> <key>CommandUUID</key> <string>0001_DeclarativeManagement</string> <key>Command</key> <dict> <key>RequestType</key> <string>DeclarativeManagement</string> </dict> </dict> </dict> </plist>

I want to install Chrome extension via configuration profile without user needing to go to System Settings and install profile manually. Can i install configuraation profile by making user only interact with my app?

We’re looking for best practices to remotely update iOS apps that are deployed in Single App Mode (SAM) or Autonomous Single App Mode (ASAM), managed through MDM. Imagine a typical use case: an iPad installed as a self-service kiosk at an airport restaurant. We need to update the app periodically without: Displaying any prompts to the user Relying on the user to approve or initiate the update (since the device is unattended) Sending technicians onsite, as many devices are in remote locations MDM providers have stated, “This is how Apple handles it,” without offering a workable solution. We’re hoping someone here has experience or suggestions for: Seamless or silent app updates in SAM/ASAM Update workflows that avoid interruptions or user interaction Any proven strategies or automation options under MDM supervision Any insight or documented approaches would be greatly appreciated. Thank you!

Hi everyone, We manage several macs through Microsoft Intune. We've deployed Platform SSO using the password based method (not the Secure Enclave) and have also enforced filevault encryption through policy. What we're trying to achieve is that multiple users can log into the same Mac. For example, I (the initial enrolling user) can log in without issues. However, we want a colleague to be able to log in as well if they're physically in front of the mac. The challenge we've run into is that once filevault is enabled (We're not sure about it but reading on forums it seems that the problem is filevault), it seems the network is not available at the login screen. This means that while the first user can create a mobile account and log in, a second user can't do the same. The moment we try to log in with another set of credentials, we get an immediate error and the password field shakes instantly, suggesting it's not even reaching out to the network or directory to validate the credentials. We'd like to confirm if this behavior is expected when FileVault is active and whether the only solution is to disable FileVault or if there are alternative solutions to allow network connectivity at the login screen. Essentially, we want to know if there's a way to let a second user log in without having to turn off disk encryption. Or if we can pre-authorize a set of users on the mac in order to create all the mobile account needed.. Thanks in advance! Thomas

I am trying to find clarification on something. We are seeing strange cases where customer devices seem to unenroll themselves after a period of MDM inactivity. This seems to tie into roughly when their identity certificate has expired. We can't confirm this because the device has since unenrolled. Is there any case where an Apple device will automatically unenroll if it's identity certificate has expired? This doesn't always seem to happen - I had a device respond immediately after being switched off for a year - but could this be down to some devices being DEP enrolled and others manually enrolled?

I need to verify my domain for Apple Pay but I'm on Shopify. Domain: blissta.co File IS accessible: https://blissta.co/.well-known/apple-developer-merchantid-domain-association But verification fails because it's a redirect, not direct hosting. Shopify doesn't allow .well-known folder creation. Has anyone solved this? Need either: Way to make Apple accept redirects Shopify workaround for direct file hosting Manual verification from Apple Using Authorize.net gateway. Case #102711828925

Hi, I’m testing the ClearPasscode MDM command: https://developer.apple.com/documentation/devicemanagement/clear-passcode-command Question: If a user enters the passcode incorrectly multiple times and the device becomes temporarily locked (e.g., “Try again in X minutes”) or reaches “Security Lockout”, can ClearPasscode still be executed successfully while the device is in that state? {'ErrorCode': 5013, 35708 'ErrorDomain': 'MCPasscodeErrorDomain', 35709 'LocalizedDescription': '\xe3\x81\x93...x89', 35710 'USEnglishDescription': 'The passcode cannot be cleared (-1)'} If it depends on conditions (e.g., supervised vs. user enrollment, availability of UnlockToken, network/check-in state), could you clarify which conditions are required? Thank you.