Hi! I found a UI bug in iOS 26.0 (23A5276f). When you swipe down from the top right to open Control Center and adjust brightness using the slider, everything looks normal. However, if you long-press the brightness slider, the brightness knob detaches from the base. The button becomes smaller while the frame remains the same, making the UI asymmetrical and misaligned. This happens consistently and is clearly a layout issue.

Hello, can someone invite me to TestFlight ?

MacBook Pro M1: OS 26.1 open Pages, nothing happens. Documents won't open after reboot and re-installing Pages. Force Quit shows Pages in red (not responding). Numbers and Keynote work fine. Cheers - Dave

Here we are facing issue, which is mentioned below: On https://johnsoncontrols.com/, tapping the blue “Scroll to Top” button (up arrow icon) causes the entire page to reload instead of smoothly scrolling back to the top. This issue occurs only on physical iOS devices and is reproducible across multiple models and iOS versions. Similar behavior is rarely/occasionally seen in Chrome on iPhone and some Android devices. Environment • Devices: Any iPhone model, we are tested on available models like iPhone 12 mini, iPhone 14, iPhone 15 • iOS Versions: Latest stable releases • Browser: Safari (WebKit) • Network: Both Wi-Fi and cellular tested • Additional Occurrences: Rarely reproduced on Chrome (iPhone, Narzo Android) • Occurs only on physical devices (not observed in Simulator) Steps to Reproduce Open Safari on a physical iPhone. Navigate to https://johnsoncontrols.com/. Scroll down until the blue “Scroll to Top” button appears on the right side. Then tap on ‘Scroll to top’ button. The page reloads instead of scrolling to the top. Expected Result Tapping the Scroll to Top button should smoothly move the user to the top of the page without reloading. Actual Result Safari reloads the entire page when the button is tapped. Troubleshooting Done • Replaced # with javascript:void(0) in the button’s anchor tag • Tested with e.stopPropagation() • Switched button position from fixed to sticky • Tried overflow-y: scroll; and -webkit-overflow-scrolling: touch; on body • Updated scrollTop logic to match iOS‑compatible standards. Questions for Community • Is this a known WebKit issue on physical iOS devices? • Any recommended debugging or profiling steps to better understand the cause? • Are there best practices or example implementations to improve Safari compatibility for scroll to top interactions?

I have been trying to make phone calls using the Phone app on my MacBook Air. The calls will go through with absolutely no problem. If it's a service that needs touch-tone phone prompts, the tones do not register with the automated system. I have also just noticed that when a call rings on my computer (and it IS ringing), there is no way to answer it. I am running Tahoe Beta 26.1 Any thoughts?

Zoom is crashing when clicking the chat button. I am using iOS 26.1. I have already powered down and reinstalled the app.

Hello :-) I‘m not entirely sure, if I‘m on the correct Place here. But I would like to report a Bug with tvOS 18.3 (latest beta) to the Apple Engineers! When maximizing an app, a clear color jump occurs. The home screen is more colorful than the open app! You can easily force this: open an app, e.g. the App Store back to the home screen open the app again now you can see a color jump of the GUI!!! The color becomes paler when the app is open. On the home screen it is more colorful again! The problem occurs with every app! So it is a global tvOS Bug! I can also send an example video if that's helpful! Best regards, Christian :-)

Hello, I found an issue with the Games app on macOS 26 (Tahoe) when viewing achievements: In App Store Connect, each achievement has different values set for the pre-earned description and the post-earned description. When testing with GameKit directly (GKAchievementDescription), both values are returned correctly. However, in the macOS Games app, the post-earned description is shown even before the achievement is earned. This seems to be a display issue specific to the Games app on macOS. Could you confirm if this is a known bug in the Games app, or if there is a reason why pre-earned descriptions are not being shown? Thank you.

Hi Ed Ford, thank you for your response. I tried to reply directly in the forum with the requested output, but I keep receiving an error message ("Your post couldn’t be saved. Please try again in a few minutes."). It seems I cannot currently post a follow-up reply. Just to notify you: I ran the command you suggested, but my shell reports zsh: command not found: devicectl. Thank you!

I have an iPad 1 running iOS 5.1.1, I want to downgrade it to iPhone OS 3.2 Does anybody have a way to downgrade unsigned .ipsw's or do I have to sign it myself?

This is purely speculation (but I have reason to believe it is the case) because I'm trying to narrow it down but, has anyone reported CarPlay in iOS 26 Beta potentially crashing vehicle infotainment systems? I have a 2025 Jeep Wrangler which is running UConnect 5. I can't prove it is the case but since updating to IOS 26 PB, I've been noticing that my infotainment system in my vehicle has been freezing, locking up, and resetting upon boot. I can't narrow this down to the phone causing it, but I can't rule it out as of now. I know that most of our infotainment units that offer CarPlay are typically running off Android, but is there a possibility that the iOS Beta is crashing our infotainment units upon connection? Again, I am just posting this to see if a) anyone can confirm that yes CarPlay can crash the Android backend of infotainment units or b) if anyone has experienced odd issues with CarPlay and their vehicle's infotainment system either freezing, crashing, or rebooting since installing iOS Beta 26. It happens when the iPhone is connected wirelessly via CarPlay, and I believe also when it is connected wired via CarPlay.

so far the only issue I’m having since the update yesterday is my Bluetooth. Every time I try to use my Bluetooth headphones since the update, they either just stop working midway through playing a song or watching a video, etc., or they play a super high pitched noise that causes me to have to rip my headphones out of my ears.

As soon as I launch, Mail and Safari crash. I hope this is temporary. Tahoe 26.0 Beta

Hi, I have a ninth generation iPad updated to iPados 26 beta 3 but now it no longer updates to the latest version of iPados 26, what can I do?

Hi , since I've been trying out this latest beta, my battery life has dropped dramatically. I have an iPhone 16 Pro. It doesn't last until the evening. I didn't have any problems with version 4 before. Thanks

We plan to use signals emitted from iBeacon to perform region detection in an app currently under development. We would like to know if region detection (didEnterRegion) can be performed when the app is in certain states. Region detection must be performed reliably. Is it possible to perform region detection in all of the following situations? • When the app is in the foreground • When the app is in the background • When the app is force-closed • When the smartphone is in sleep mode • When the smartphone is restarted Translated with DeepL.com (free version)

Hello, I’m wanting to install macOS 26 on a partition on my MacBook Pro so I can use the fully featured Xcode Beta. I was able to create the partition but am having trouble figuring out how to install the operating system on the partition because on the developer downloads site there is only .ispw files. What are the steps to do this successfully? Thanks. Kevin

Does CarPlay driving tasks entitlement support push notifications on CarPlay? If no, can Critical Alerts entitlement help in this case?

Hi all, Well Im about to publish an app for iOS and the process is almost done but I don't know how is it to publish the same for MacOS, I mean, I can generate the app file from my engine (Unity) and even run it, but from there what are the steps? do we need to pass this to Xcode too? if so please direct me to where its explained because I couldn't find it, thanks a lot for any help

Hi all, I’m trying to add a file to a game on my iPhone via my MacBook. Now we have no iTunes connecting with the cable brings up the same menus however I’m being told I have to reset my iPhone back to factory settings to do this (see attached). I’m on IOS26 beta 6. A couple of questions I’ve backed up via iCloud, if I reset would I be able to reset it right back to my current set up with the beta, would I lose anything? Is there another way to connect to my MacBook to enable access to the games and files that would allow me to do a minor change without having to reset?