Hey, I cant can update or downgrade to a newer Version like IOS18.5 Can someone help me? And will Apple fix that?

I’m running macOS 26 Beta 1 (build 25A5279m) on a 2019 Mac Pro (MacPro7,1) with a single 4K display connected via HDMI. Whenever I attempt to launch Finder, WindowServer immediately aborts and the machine reboots. Crash details: Process: WindowServer (PID 1441) Exception: EXC_CRASH (SIGABRT) triggered in thread 0 (ws_main_thread) Termination Reason: Abort trap: 6 Backtrace highlights: CA::OGL::MetalContext::draw(MTLPrimitiveType, …) hits an internal __assert_rtn in libsystem_c.dylib Subsequent calls all stem from QuartzCore’s OpenGL/Metal bridge (CA::OGL::render_layers, LayerNode::apply, etc.) Related threads: Thread 2 (com.apple.coreanimation.render-server) idle in mach_msg_overwrite Thread 1 shows AmbientDisplay and ColorSync callbacks running Hardware/Software: MacPro7,1 (2019) macOS 26.0 Beta 1 (25A5279m) 4K monitor via HDMI System Integrity Protection enabled What I’ve tried so far: Safe-boot (crash still occurs) Switching display profiles in System Settings → Displays → Color (no effect) Happy to provide any additional logs or verbose console output. Let me know if there’s any other data that would help diagnose the Metal/OpenGL integration issue in this beta.

After updating to iPad iOS26 , the software update area shows that it cannot check for updates. Is this normal?

I set iOS 26 to install overnight, put my iPhone 16 Pro on the MagSafe charger, watched it charge just fine, and went to sleep. When I woke up the iPhone showed the “plug into power” dead battery screen. I took it off MagSafe and put it back on. A half hour later the phone was warm but still wouldn’t power on, just showed the battery screen with a little red in it. I took it off MagSafe and plugged it into my iPad charging brick with USB cable to give it more power, still it did not turn on. I tried holding all the buttons to try to force a restart but didn’t work. For anyone else encountering this, do this to enter DFU mode and restore it. I had to do it a few times before I got the timing right. Plug into your Mac and open Finder (or apparently a PC with Apple Devices or iTunes) Press and quickly release volume up Press and quickly release volume down Press and hold right side button When the battery disappears and screen goes black, hold volume down and continue holding side button After a couple seconds release the side button and continue holding volume down A prompt to allow connecting to the iPhone should appear after a couple seconds, click Allow, and it’ll say the iPhone entered DFU mode - proceed to restore the firmware

I have created an app and for the final stage i added subscription feature. This works great in testflight, but not when i push out to external testers. I set up what i needed to in apple store connect (i must have done it right as it works in testflight), and i linked it to th emost recent version. Nothing I do seems to get the sub info to display and pull through to the app in the sub box when selected. No price and the usual stuff. I was told send for review. Failed the review and im working on that but something tell sme this is a glitch athat needs fixed on my account maybe. Can anyone help please

Hey there, I recently updated my iPhone to the iOS 26 developers beta version, and I’m encountering an issue on the Software Update page. It says “Unable to check for updates,” and I’m unable to revert to iOS 18. Is this a temporary problem? Will I be able to update my iPhone in the future without needing to reset it? Thanks

There seems to be a broken USB sync and Finder recognition issue. Is there a fix to this?

Hello, I installed iOS 26 beta 1 yesterday when it came off but now, when I plug my iPhone, it just do nothing. I can charge it via the induction charger but I can't via USB-C port. The other way I can charge it is by turning my iPhone off and plugging it so it starts and then it charges via USB-C Port even when it starts. The thing is that when I unplug the cable and try to plug it back in, it doesn't charge anymore... I tried to put the restore mode (with the Mac and the cable on the screen) and even the DFU Mode but the iPhone is not detected by my Macbook and it's the same thing for my Windows PC : not detected... I also tried to erase the settings and content but same issue... Not charging Apple Store can do nothing because it's a dev beta... Am I the only one to have that issue ?

Anyone else's phone die after installed iOS 26 beta? I'm not happy at all. shows that my phone is charging but will not turn on. have tried hard resetting it 50+ times, 5 different chargers.. nothing.

That time of year again. I’ve tried multiple restarts, and it still won’t load. I’m not sure if/how to remove the beta profile at this point (that seems to have worked for previous betas), given that the beta settings are hidden.

I installed the new developer beta 26 yesterday, but since that I only have problems with my iPhone. Besides not being able to update the software bc an error appears, I also don‘t have the abbility to use mobile data. If I try to, it only says „could not activate mobile data network“. I already tried to restart the phone, to reset it or to take the SIM out and in

Hello, I have a question regarding the ethernet-over-USB-C stack within iOS/iPadOS. It seems that when manually assigning an IP on this interface within iOS, the IP is stored. Therefore, when disconnecting (the USB-C cable) and reconnecting to another device for a subsequent ethernet connection, the iOS device will always default to the previously assigned IP address (obviously, this isn't the case if the other end is a DHCP server). So, within the iPhone's Ethernet-over-USB-C driver, I was curious if iOS just keeps the assignment based on the MAC of the local USB-C interface, or is stored information tied to some other identifier? Is there a way to override this behavior? Thank you

Installed the iOS 26 Beta on my iPhone 13 Pro last night, hated it. I wasn't aware that there is a supported way of restoring back to iOS18.5, so I (foolishly) opted to flash the iOS18.5 ispw file onto my device using a 3rd party tool. Now, my device is stuck in a state between. Unable to flash, unable to use itunes to restore, randomly gives error codes during restoration attempts. Worries my device may be lost permanently! Please advise.

MacOS 26 apple removed launchpad, how to get back?

I launched Amazon Prime and bricked my IPad all reset options have failed, any one have some thought?

Maybe a bit of a simplistic question, but…. Best ways to create music - programmatically - within an app? I have a few small, simple games that I would like to add some background music to. I’ve fiddled with AVAudio, SKAudio, and now AudioKit. I’m just not quite finding the holy grail of music generation. I don’t know if it’s more technique or tool. So I thought I’d hit up the pool of minds here for some suggestions…?

I recently updated to tvOS 26 on my Apple TV 4K (1st generation) and was disappointed to find that apps I restrict no longer appear at all. In earlier versions, restricted apps would still be visible and simply prompt for a passcode — this was much more convenient for adults in the household. Now, if I restrict apps for my children, they disappear completely. To use them again, I have to go deep into settings, turn restrictions off, and even recreate the passcode each time, which is frustrating and impractical for daily use. I also tried adding a Kids user account, but most restrictions still apply system-wide. Only the Apple TV app behaves differently between users. This makes switching between parent and child accounts nearly pointless for managing access. Please consider one or both of the following: 1. Bring back the passcode-on-launch behavior for restricted apps (instead of hiding them). 2. Give each user their own isolated settings environment, like how profiles work on iOS/iPadOS or even a fresh Apple TV—this way, restrictions, home screen, and app access could be personalized. Families are a huge part of the Apple TV audience, and these recent changes have made it much harder to use the device in a shared household. Thank you!

I recent installed IOS 26, with my iphone 15 as a machine. I am experiencing glitch on switching apps, switching users in a specific apps. Delay is also visible when unlocking the phone, typing, touching the screen, going back to the previous app (clicking the arrow button on the top left). When using a two fingers navigating the phone, the other finger is unrecognizable when clicking on to something. Overall, UI were elegant and amazing. Please fix the responsiveness and may consider lower versions of iphone when possible.

The iPhone mobile data usage skyrocketed to use 1GB per day whereas I am normally a 5GB a month data user. the culprit was Apple System Services General there is currently no iPhone functionality to turn off System Services Genera. the solution was to block updates.cdn-apple.com using data sniffer called Proxyman. Tip hat to the person who posted “High mobile data usage on iOS 18 and how to solve it” on Reddit.com This is something apple developers maybe should look at

Hi, Visual Intelligence doesn't work for my screenshot. Does anyone know why? I'm in Greece, maybe it's the region, or something to set up? Thanks