My Genmoji is not opening . Every time I open it it just closes right away.

i got mine yesterday it is so good but i waited almost 2 weeks

I add UDIDs but I don't see it in the list. Trying to add again and get error that this device already added. Also there is no added device in Provision Profile. What can we do with that?

i am unable to do cpu core offline using "sudo cpuctl offline 2" it is giving error like cpuctl: processor_exit(2) failed is there any ways to do cpu offline on Apple Silicon?

Every document you can think of has my name, "Pranam," in it, and I refuse to change my name, nor do I want any alias inserted. Kindly assist me with the right way to solve this issue in a manner that is ethical, inclusive, and legally valid according to government documents.

Hello, Where can I find invoices about my developer account? Where can I change payment information for my developer account? Thanks for your kind support! Johan

My credit card with name of my wife is not avaiable so now i want to use my card to purchase program of individual but name of account is not change to my name even i changed in appleid

Hi, ok everyone. I need help please. My developer account was suddenly blocked without any reason and any notice. What I should do now? On regular support I didn't get any useful information, they said that this is probably permanent. WTH?? Can I even know what I have done wrong???Any help please! I cant beleive it. I have building app for years to get some subscribers and now the block me without ANY info !!!!??? I pay for developer account for some year I was at wwdc etc. and now I get blocked. WTF PLEASE HELP! the account Im writing from is not the account that was blocked! I would write with my main developer account but I cant login.

Hello everyone, I recently enrolled in the Apple Developer Program, completed all required forms, and submitted my payment details. I received an email confirming my enrollment order and stating it would be processed within two business days, but it’s now been over four days, and I haven’t seen a charge on my card or received any follow-up communication. Here’s what I’ve tried so far: Emailed Apple Developer Support multiple times: No response after four follow-ups. Called Apple Support: They couldn’t connect me directly to Developer Support. Is there a way to expedite this or another contact method that I might have missed? Any advice or similar experiences would be greatly appreciated!

For un unknown reason, my Apple ID has been blocked. Since I can not connect anymore to my developer account ! I've asked to unblock it (iforgot.apple.com) but according to support the unblock sequence is not send because this Apple ID is in used. I need help to unblock my ID in order to manage my app.... note : I use an another account to post this messages.

Hi there, I subscribed and paid for the Apple Developer Program through the Developer app on my Mac two days ago, but the program is still not active. In the Developer app, I now see a message saying that I can’t enroll through the app with this account, even though I did it before. On the web version, it says I need to purchase the membership—how is that possible? I can see my subscription in my account subscriptions. Support hasn’t provided any answers yet.

Have been on 18.2 beta for a while and am now on beta 3 for the past few days and am still waiting acceptance for Genmoji, playground, etc... How long is the typical wait? On iPhone 16 Promax

Are Administrators able to request a system extension via https://developer.apple.com/contact/request/system-extension/ or are Account Holders the only ones who can?

I created a PointsOfInterestSearch (https://developer.apple.com/documentation/mapkitjs/pointsofinterestsearch) on the frontend using MapKit JS: const poiSearch = new window.mapkit.PointsOfInterestSearch({ center: new mapkit.Coordinate(userLocation.lat, userLocation.lng), radius: 10000, }); poiSearch.search((error, results) => { console.log("Length of poiSearch:", results.places.length); results.places.forEach((place) => { console.log("Name:", place.name); }); }); The length of results.places is 20. Trying it with a bigger radius also still results in 20. The docs for PointsOfInterestSearchResponse shows only a places (https://developer.apple.com/documentation/mapkitjs/pointsofinterestsearchresponse) and no options for pagination. How can I paginate the rest of the results?

I'm encountering an issue while trying to enroll in the Apple Developer Program using the mobile app. Every time I attempt to proceed, I receive the following error message: "There may be an issue with your account that needs to be resolved before you can continue." I have verified my account information and followed all the necessary steps. I sent an email to Apple, but I haven’t received a response for several days. I’d be grateful for any help if anyone else has experienced this issue.

Couple of days ago I installed ios 18.2 beta update and now my iphone 15 pro drains battery and overheats like hell. It is difficult to touch. and as i plug out my charger, the battery drains very fast (30% to O% in 10 minutes with no literally no use) To note, my battery health is 100% with around 176 battery cycles and i always use original apple 20W charger and cable. I have even changed the charger to a new original apple 20W charger and the issue persists. I have reset it but still the same happens. so it is lying dead for 2 days because i cannot charge it because of extreme heating. I got it checked at apple authorised service center as mentioned on apple website, they said they would reinstall the software in warranty. today they said they said the issue persists after sofware reinstallation and saying it is hardware thing. What should i do??

I am developing an access controller RF (NFC). I know that the ADP developer account can only handle NFC Tags. Can I use NFC AID and HCE in ADEP? ADEP supports hotel card keys, employee badges, etc. Is it NFC? Or is it NFC+BLE?

We applied for Location Push Entitlement on June. It has been several months since then but we still got not any results (either passed or rejected). Can anyone tell us what's going on?

Hello fellow developers, My team has been running into a persistent INVALID_CLIENT error while trying to implement Sign In With Apple JS in our Nextjs app with signInWithPopup from firebase/auth. Here is the full error: Error getting access token from https://appleid.apple.com, OAuth2 redirect uri is: https://[redacted]/__/auth/handler, response: OAuth2TokenResponse{params: error=invalid_client, httpMetadata: HttpMetadata{status=400, cachePolicy=NO_CACHE, cacheDurationJava=null, cacheImmutable=false, staleWhileRevalidate=null, filename=null, lastModified=null, retryAfter=null, crossOriginEmbedderPolicy=null, crossOriginOpenerPolicy=null, crossOriginResourcePolicy=null, permissionsPolicies=[], headers=HTTP/1.1 200 OK, contentSecurityPolicies=[], originTrials=[], reportToHeaders=[], varyHeaderNames=[], cookieList=[]}} I've checked every thread on these forums and stackoverflow for solutions to this very common issue, and we tried them all. We made sure to verify that the Services ID, Apple Team ID, Key ID and Private key are all correctly used in the firebase console, we have regenerated our keys, all to no avail. We also contacted Apple Support via the Development And Technical option with Certificates, Identifiers, and Provisioning Profiles topics, but they directed us to code-level support, which excludes 3rd Party libraries so this does not seem appropriate for us. Does anyone have any idea of what might be wrong or suggestions for something we could try? We are able to get the pop up to open with an Apple login form, allow us to enter the credentials, but then when we hit continue the error occurs. We are using firebase version ^10.4.0 Any help would be greatly appreciated and let me know if I need to provide any additional info. Thank you.

PLATFORM AND VERSION iOS Development environment: Xcode 15.4, macOS Sonoma 14.5 Run-time configuration: macOS Sonoma 14.5 DESCRIPTION OF PROBLEM Hi, I'm on DriverKit 21.0. I'm looking for a system call (that isn't deprecated) in my driver to set the Ethernet link speed manually. Normally a user would set it by System Settings... -> Network -> -> Details -> Hardware -> Configure (Manually), and then Speed (choose the link speed). With my driver, when I configure for manual, no link speeds show up. I want to know how to populate the speeds (1000BaseT, etc.) so a user can select one. What system APIs are used for this? I can't find much detail in the documentation. I do see Instance Methods for some related things like getSupportedMediaArray, but most of these newer methods don't have details in the documentation to guide me on what they actually do. Thanks in advance...