My MacBook Air M1 has installed Mac OS Sonoma 14.3.1, and I tried to install game-poring-toolkit tonight. After the step which it requires me to input the command "brew -v install apple/apple/game-porting-toolkit", Terminal ran for minutes. But at the end this error appeared: Error: apple/apple/game-porting-toolkit 1.1 did not build. I don't know anything about coding and software. Could someone please tell me what cause this error and how to fix it after you read my post? I will appreciate your help!

I have a Core Image filter in my app that uses Metal. I cannot compile it because it complains that the executable tool metal is not available, but I have installed it in Xcode. If I go to the "Components" section of Xcode Settings, it shows it as downloaded. And if I run the suggested command, it also shows it as installed. Any advice? Xcode Version Version 26.0 beta (17A5241e) Build Output Showing All Errors Only Build target Lessons of project StudyJapanese with configuration Light RuleScriptExecution /Users/chris/Library/Developer/Xcode/DerivedData/StudyJapanese-glbneyedpsgxhscqueifpekwaofk/Build/Intermediates.noindex/StudyJapanese.build/Light-iphonesimulator/Lessons.build/DerivedSources/OtsuThresholdKernel.ci.air /Users/chris/Code/SerpentiSei/Shared/iOS/CoreImage/OtsuThresholdKernel.ci.metal normal undefined_arch (in target 'Lessons' from project 'StudyJapanese') cd /Users/chris/Code/SerpentiSei/StudyJapanese /bin/sh -c xcrun\ metal\ -w\ -c\ -fcikernel\ \"\$\{INPUT_FILE_PATH\}\"\ -o\ \"\$\{SCRIPT_OUTPUT_FILE_0\}\"' ' error: error: cannot execute tool 'metal' due to missing Metal Toolchain; use: xcodebuild -downloadComponent MetalToolchain /Users/chris/Code/SerpentiSei/StudyJapanese/error:1:1: cannot execute tool 'metal' due to missing Metal Toolchain; use: xcodebuild -downloadComponent MetalToolchain Build failed 6/9/25, 8:31 PM 27.1 seconds Result of xcodebuild -downloadComponent MetalToolchain (after switching Xcode-beta.app with xcode-select) xcodebuild -downloadComponent MetalToolchain Beginning asset download... Downloaded asset to: /System/Library/AssetsV2/com_apple_MobileAsset_MetalToolchain/4d77809b60771042e514cfcf39662c6d1c195f7d.asset/AssetData/Restore/022-19457-035.dmg Done downloading: Metal Toolchain (17A5241c). Screenshots from Xcode Result of "Copy Information" Metal Toolchain 26.0 [com.apple.MobileAsset.MetalToolchain: 17.0 (17A5241c)] (Installed)

Hi everyone, I'm developing an ARKit app using RealityKit and encountering an issue where a video displayed on a 3D plane shows up as a pink screen instead of the actual video content. Here's a simplified version of my setup: func createVideoScreen(video: AVPlayerItem, canvasWidth: Float, canvasHeight: Float, aspectRatio: Float, fitsWidth: Bool = true) -> ModelEntity { let width = (fitsWidth) ? canvasWidth : canvasHeight * aspectRatio let height = (fitsWidth) ? canvasWidth * (1/aspectRatio) : canvasHeight let screenPlane = MeshResource.generatePlane(width: width, depth: height) let videoMaterial: Material = createVideoMaterial(videoItem: video) let videoScreenModel = ModelEntity(mesh: screenPlane, materials: [videoMaterial]) return videoScreenModel } func createVideoMaterial(videoItem: AVPlayerItem) -> VideoMaterial { let player = AVPlayer(playerItem: videoItem) let videoMaterial = VideoMaterial(avPlayer: player) player.play() return videoMaterial } Despite following the standard process, the video plane renders pink. Has anyone encountered this before, or does anyone know what might be causing it? Thanks in advance!

So I get JPEG data in my app. Previously I was using the higher level NSBitmapImageRep API and just feeding the JPEG data to it. But now I've noticed on Sonoma If I get a JPEG in the CMYK color space the NSBitmapImageRep renders mostly black and is corrupted. So I'm trying to drop down to the lower level APIs. Specifically I grab a CGImageRef and and trying to use the Accelerate API to convert it to another format (to hopefully workaround the issue... CGImageRef sourceCGImage = `CGImageCreateWithJPEGDataProvider(jpegDataProvider,` NULL, shouldInterpolate, kCGRenderingIntentDefault); Now I use vImageConverter_CreateWithCGImageFormat... with the following values for source and destination formats: Source format: (derived from sourceCGImage) bitsPerComponent = 8 bitsPerPixel = 32 colorSpace = (kCGColorSpaceICCBased; kCGColorSpaceModelCMYK; Generic CMYK Profile) bitmapInfo = kCGBitmapByteOrderDefault version = 0 decode = 0x000060000147f780 renderingIntent = kCGRenderingIntentDefault Destination format: bitsPerComponent = 8 bitsPerPixel = 24 colorSpace = (DeviceRBG) bitmapInfo = 8197 version = 0 decode = 0x0000000000000000 renderingIntent = kCGRenderingIntentDefault But vImageConverter_CreateWithCGImageFormat fails with kvImageInvalidImageFormat. Now if I change the destination format to use 32 bitsPerpixel and use alpha in the bitmap info the vImageConverter_CreateWithCGImageFormat does not return an error but I get a black image just like NSBitmapImageRep

Hi, I've got a Swift Framework with a bunch of Metal files. Currently users have to manually include a Metal Lib in their bundle provided separately, to use the Swift Package. First question; Is there a way to make a Metal Lib target in a Swift Package, and just include the .metal files? (without a binary asset) Second question; If not, Swift 5.3 has resource support, how would you recommend to bundle a Metal Lib in a Swift Package?

So I've been trying out GPTK with Elite Dangerous Horizons game and it looks like from what I can tell. The VRAM keeps going up until it goes over the limit where it drops the FPS to 1-3 FPS and then crashes the game. From the Performance HUD I can see that it looks like when using GPTK, the VRAM usage just keeps climbing and I never saw it drop down at all. I did some limited testing, and from that I think I can conclude that it is probably not a VRAM leak, but it might be caching it. The reason for this is because I noticed that if I went back to the area that I've been before. It won't increase the VRAM usage. So either there is something wrong with the freeing VRAM memory part, or it could be that GPTK might not be reporting the right amount of VRAM available to use? So maybe that's why it keeps allocating VRAM until it went out of memory and crashed the game. Just to test, I did try running the game with DXVK+MoltenVK combo, and I can see that it works just fine. VRAM is being freed up when it's no longer used. Is this a known issue in some games?

I have an AR game using ARKit with SceneKit that works just fine in iOS 17. In the iOS 18 betas, the AR background image shows black instead of showing the real world. As a result there's no tracking and obviously the whole game is useless. I narrowed down the issue to showing the Game Center Access Point. My app has ViewController 1 (VC1) showing the main menu and that's where I want to show the GC Access Point. From there you open VC2 which shows a list of levels. Selecting any level will open VC3 which has the ARScene. Following is the code I use to start Game Center in VC1: GKLocalPlayer.local.authenticateHandler = { gcAuthVC, error in let isGameCenterReady = (gcAuthVC == nil) && (error == nil) if let viewController = gcAuthVC { self.present (viewController, animated: true, completion: nil) } if error != nil { print(error?.localizedDescription ?? "") } if isGameCenterReady { GKAccessPoint.shared.location = .topLeading GKAccessPoint.shared.showHighlights = true GKAccessPoint.shared.isActive = true } } When switching to VC2 I run GKAccessPoint.shared.isActive = false so that the Access Point will no longer show in any of the following VCs. I tried running it in VC1, VC2, and again in VC3 - it doesn't change anything. Once I reach VC3, the background is black. If in VC1 I don't run GKAccessPoint.shared.isActive = true, so I don't activate the access point, the behavior is as follows: If I wait until after the Game Center login animation completes and closes on its own and then I proceed to VC2 and VC3, the camera image will show correctly If I quickly move to VC2 before the Game Center login animation has completed, so my code will close it by setting active = false, and then I continue to VC3, I will see the black background problem. So it does look like activating the access point and then de-activating it causes the issue. BTW, if I activate the access point and leave it on in all VCs, the same black background issue persists. Other than that, when I'm in VC3 with the black background and I switch to another app (so my game moves to the background), when it returns to the foreground, the camera suddenly shows the real world correctly! I tried to manually reset the AR session by pausing and restarting it, but that didn't change anything. Also, when I check with the debugger, it looks like when the app comes back to the foreground it also doesn't run the session start code. But something does seem to reset itself so I wonder what that is. Maybe I could trigger the same manually in my cdoe??? I repeat that everything works just fine in iOS 17 and below. This problem only started with the iOS 18 beta (currently on beta 5, but it started in some of the previous betas as well). So could this be a bug in iOS 18? As a workaround I could check the iOS version and if it's iOS18 not activate the access point, hoping that the user will not jump to VC2 too quickly, and show my own button which will open Game Center. But I'd rather give the users the full experience with their own avatar and the highlights showing up. Plus, certainly some users will move quickly to VC2 and that will be an awful experience. Any help would be greatly appreciated. Thanks!

, it is after update to Xcode 14.3: [default] CGSWindowShmemCreateWithPort failed on port 0

Hi — we’re testing our app on iOS 26 and ran into strange behavior with GKLocalPlayer.local.authenticateHandler. GKLocalPlayer.local.authenticateHandler = { [weak self] viewController, error in // additional code } What happens: When we assign authenticateHandler on iOS 26 and the user is not signed in to Game Center, the system shows a full-screen Game Center overlay asking the user to sign in. If the user taps Cancel, nothing further happens — the closure is not invoked again, so we don’t receive an error or any callback. The app never learns whether the auth was cancelled or failed. In previous iOS versions the closure was called (with viewController / error as appropriate) and the flow worked as expected. What we tried: Verified authenticateHandler is being set. Checked GKLocalPlayer.local.isAuthenticated after the overlay dismisses — it’s unchanged. Observed system logs: a com.apple.GameOverlayUI scene is created and later removed (so the auth overlay is shown by the system). Confirmed the same code works on earlier iOS versions. :thinking: Question: Has anyone seen authenticateHandler not being invoked on iOS 26 when the Game Center auth overlay is presented? Could this be a behavioral change in iOS 26 (overlay runs in a separate system process), or a bug? Any suggested workarounds to reliably detect that the user cancelled the sign-in (for example: listening for willResignActive / didBecomeActive, watching for a system overlay, or saving/presenting the viewController manually)? Thanks in advance for any advice — we’d appreciate pointers or suggested diagnostics ?

Hey folks, I have a legacy game that is running OpenGL ES - and it no longer works on the simulators that are running Apple Silicon, ie iPhone 15 Pro, or the 13" iPads. And yes, i'm also running on Apple Silicon (M1 Max). The apps work fine on the actual devices, but the simulator crashes on any glDrawElements with a stack that looks like the following: I have not yet seen an announcement about this not working but i've seen mention in other apps of stopping to support GL (https://github.com/maplibre/maplibre-native/issues/2351) Can anyone shed some light? I'm obviously going to try to fix it, or find a recent sample app from which to start to see what might be up. Or move to metal, but i hadn't bargained for that level of effort atm ;) Any suggestions appreciated!

Hello, I have noticed a performance drop on SpriteKit-based projects running on iOS 26.0 (23A341). Below is a SpriteKit scene used to test framerate on different devices: import SpriteKit import SwiftUI class BareboneScene: SKScene { override func didMove(to view: SKView) { size = view.bounds.size anchorPoint = CGPoint(x: 0.5, y: 0.5) backgroundColor = .darkGray let roundedSquare = SKShapeNode(rectOf: CGSize(width: 150, height: 75), cornerRadius: 12) roundedSquare.fillColor = .systemRed roundedSquare.strokeColor = .black roundedSquare.lineWidth = 3 addChild(roundedSquare) let action = SKAction.rotate(byAngle: .pi, duration: 1) roundedSquare.run(.repeatForever(action)) } } struct BareboneSceneView: View { var body: some View { SpriteView( scene: BareboneScene(), debugOptions: [.showsFPS] ) .ignoresSafeArea() } } #Preview { BareboneSceneView() } The scene is very simple, yet framerate drops to ~40 fps as shown by the Metal HUD. Tested on: iPhone 13, iOS 26.0: framerate drops to 40 fps. Sometimes it runs at near 60fps. But if the screen is touched repeatedly, the framerate drops to 40-50 fps again. iPhone 11 Pro, iOS 26.0: ~40fps. iPad 9th Gen, iOS 18.6.2: 60fps, no issues. See screenshots attached. These numbers were observed by me and members of our beloved SpriteKit Discord server. Thank you for your attention.

I'm an iOS developer, and I've been testing our app in iOS 18.0 Beta. I noticed that there's a problem with the font rendering, and after troubleshooting, I've found out that it's caused by the removal of the PingFang.ttc font in 18.0. I would like to ask the reason for removing this font file and which font should be used to display Chinese in the future? My test device is an iPhone 11 Pro and the system version is iOS 18.0 (22A5297). I have also tested Beta 1 and it has the same issue. In previous versions of the system, the PingFang font is located in this directory /System/Library/Fonts/LanguageSupport/PingFang.ttc. But in iOS 18.0, the font file in this directory has become Kohinoor.ttc, and I've tested that this font can't display Chinese either. I traversed the following system font directories and could not find the PingFang.ttc font file. /System/Library/Fonts/AppFonts /System/Library/Fonts/Core /System/Library/Fonts/CoreAddition /System/Library/Fonts/CoreUI /System/Library/Fonts/LanguageSupport /System/Library/Fonts/UnicodeSupport /System/Library/Fonts/Watch Looking for answers, thanks for the help!

Hello, I'm working on a game that features online multiplayer. The game is developed using Unity and Apple Unity plugins. The "isUnderAge" property restricts the online multiplayer feature. Everything works as expected on all platforms (Mac, iPhone, iPad, AppleTV, and visionPro) except on Macs equipped with an Intel chip. Using the same iCloud and GameCenter, with no restrictions enabled, "isUnderAge" returns false, as expected, but on Mac equipped with an Intel chip, it returns true. Is there any restriction or compatibility issue with those chips? Is there a workaround? Thanks

Hello! Bare with me here, as there is a lot to explain! I am working on implementing a Game Center high score leaderboard into my game. I have looked around for examples of how to properly implement this code, but have come up short on finding much material. Therefore, I have tried implementing it myself based off information I found on apples documentation. Long story short, I am getting success printed when I update my score, but no scores are actually being posted (or at-least no scores are showing up on the Game Center leaderboard when opened). Before I show the code, one thing I have questioned is the fact that this game is still in development. In AppStoreConnect, the status of the leaderboard is "Not Live". Does this affect scores being posted? Onto the code. I have created a GameCenter class which handles getting the leaderboards and posting scores to a specific leaderboard. I will post the code in whole, and will discuss below what is happening. PLEASE VIEW ATTACHED TEXT TO SEE THE GAMECENTER CLASS! GameCenter class - https://developer.apple.com/forums/content/attachment/0dd6dca8-8131-44c8-b928-77b3578bd970 In a different GameScene, once the game is over, I request to post a new high score to Game Center with this line of code: GameCenter.shared.submitScore(id: GameCenterLeaderboards.HighScore.rawValue) Now onto the logic of my code. For the longest time I struggled to figure out how to submit a score. I figured out that in Xcode 12, they deprecated a lot of functions that previously worked for me. Not is seems that we have to load all leaderboards (or the ones we want). That is the purpose behind the leaderboards private variable in the Game Center class. On the start up of the app, I call authenticate player. Once this callback is reached, I call loadLeaderboards which will load the leaderboards for each string id in an enum that I have elsewhere. Each of these leaderboards will be created as a Leaderboard object, and saved in the private leaderboard array. This is so I have access to these leaderboards later when I want to submit a score. Once the game is over, I am calling submitScore with the leaderboard id I want to post to. Right now, I only have a high score, but in the future I may add a parameter to this with the value so it works for other leaderboards as well. Therefore, no value is passed in since I am pulling from local storage which holds the high score. submitScore will get the leaderboard from the private leaderboard array that has the same id as the one passed in. Once I get the correct leaderboard, I submit a score to that leaderboard. Once the callback is hit, I receive the output "Successfully submitted score to leaderboard". This looks promising, except for the fact that no score is actually posted. At startup, I am calling updatePlayerHighScore, which is not complete - but for the purpose of my point, retrieves the high score of the player from the leaderboard and is printing it out to the console. It is printing out (0), meaning that no score was posted. The last thing I have questions about is the context when submitting a score. According to the documentation, this seems to just be metadata that GameCenter does not care about, but rather something the developer can use. Therefore, I think I can cross this off as causing the problem. I believe I implemented this correctly, but for some reason, nothing is posting to the leaderboard. This was ALOT, but I wanted to make sure I got all my thoughts down. Any help on why this is NOT posting would be awesome! Thanks so much! Mark

Hello. In the iOS app i'm working on we are very tight on memory budget and I was looking at ways to reduce our texture memory usage. However I noticed that comparing ASTC8x8 to ASTC12x12, there is no actual difference in allocated memory for most of our textures despite ASTC12x12 having less than half the bpp of 8x8. The difference between the two only becomes apparent for textures 1024x1024 and larger, and even in that case the actual texture data is sometimes only 60% of the allocation size. I understand there must be some alignment and padding going on, but this seems extreme. For an example scene in my app with astc12x12 for most textures there is over a 100mb difference in astc size on disk versus when loaded, so I would love to be able to recover even a portion of that memory. Here is some test code with some measurements i've taken using an iphone 11: for(int i = 0; i < 11; i++) { MTLTextureDescriptor *texDesc = [[MTLTextureDescriptor alloc] init]; texDesc.pixelFormat = MTLPixelFormatASTC_12x12_LDR; int dim = 12; int n = 2 << i; int mips = i+1; texDesc.width = n; texDesc.height = n; texDesc.mipmapLevelCount = mips; texDesc.resourceOptions = MTLResourceStorageModeShared; texDesc.usage = MTLTextureUsageShaderRead; // Calculate the equivalent astc texture size int blocks = 0; if(mips == 1) { blocks = n/dim + (n%dim>0? 1 : 0); blocks *= blocks; } else { for(int j = 0; j < mips; j++) { int a = 2 << j; int cur = a/dim + (a%dim>0? 1 : 0); blocks += cur*cur; } } auto tex = [objCObj newTextureWithDescriptor:texDesc]; printf("%dx%d, mips %d, Astc: %d, Metal: %d\n", n, n, mips, blocks*16, (int)tex.allocatedSize); } MTLPixelFormatASTC_12x12_LDR 128x128, mips 7, Astc: 2768, Metal: 6016 256x256, mips 8, Astc: 10512, Metal: 32768 512x512, mips 9, Astc: 40096, Metal: 98304 1024x1024, mips 10, Astc: 158432, Metal: 262144 128x128, mips 1, Astc: 1936, Metal: 4096 256x256, mips 1, Astc: 7744, Metal: 16384 512x512, mips 1, Astc: 29584, Metal: 65536 1024x1024, mips 1, Astc: 118336, Metal: 147456 MTLPixelFormatASTC_8x8_LDR 128x128, mips 7, Astc: 5488, Metal: 6016 256x256, mips 8, Astc: 21872, Metal: 32768 512x512, mips 9, Astc: 87408, Metal: 98304 1024x1024, mips 10, Astc: 349552, Metal: 360448 128x128, mips 1, Astc: 4096, Metal: 4096 256x256, mips 1, Astc: 16384, Metal: 16384 512x512, mips 1, Astc: 65536, Metal: 65536 1024x1024, mips 1, Astc: 262144, Metal: 262144 I also tried using MTLHeaps (placement and automatic) hoping they might be better, but saw nearly the same numbers. Is there any way to have metal allocate these textures in a more compact way to save on memory?

I have used SceneKit for several years but recently have a problem where a scene with fewer than 50 nodes is partially drawn, i.e., some nodes are, some aren't, and greater than 50 nodes are always draw correctly. This seems to have happened since concurrency was introduced. (w.r.t. concurrency, I had been using DispatchQueue successfully before then.) Since all nodes (few or many) are constructed and implemented by the same functions etc. I'm baffled. When I print the node hierarchy all nodes are present whether few or many. SceneView() has [.rendersContinually] option selected. Every node created (few or many) has .opacity = 1.0, .isHidden = false I haven't tried setting-back the compiler version as that is not a long term solution, and I know the same code worked fine then.

I've been playing with the new GameSave API and cannot get it to work. I followed the 3-step instructions from the Developer video. Step 2, "Next, login to your Apple developer account and include this entitlement in the provisioning profile for your game." seems to be unnecessary, as Xcode set this for you when you do step 1 "First add the iCloud entitlement to your game." Running the app on my device and tapping "Load" starts the sync, then fails with the error "Couldn’t communicate with a helper application." I have no idea how to troubleshoot this. Every other time I've used CloudKit it has Just Worked™. Halp‽ Here is my example app: import Foundation import SwiftUI import GameSave @main struct GameSaveTestApp: App { var body: some Scene { WindowGroup { GameView() } } } struct GameView: View { @State private var loader = GameLoader() var body: some View { List { Button("Load") { loader.load() } Button("Finish sync") { Task { try? await loader.finish() } } } } } @Observable class GameLoader { var directory: GameSaveSyncedDirectory? func stateChanged() { let newState = withObservationTracking { directory?.state } onChange: { Task { @MainActor [weak self] in self?.stateChanged() } } print("State changed to \(newState?.description ?? "nil")") switch newState { case .error(let error): print("ERROR: \(error.localizedDescription)") default: _ = 0 // NOOP } } func load() { print("Opening gamesave directory") directory = GameSaveSyncedDirectory.openDirectory() stateChanged() } func finish() async throws { print("finishing syncing") await directory?.finishSyncing() } }

After many former OS and Xcode updates, my Game Controller Swift code generates a "DIS-CONNECTED" MESSAGE. Mac Sequoia 15.2 Xcode 16.2 Tried to update PlayStation controller firmware on my Mac. Still no luck with Xcode and its use of a game controller with tvOS.

Using Reality Composer Pro 2.0, I created a simple shader graph that displays a texture on an unlit surface: On visionOS 2 beta, I can successfully use ShaderGraphMaterial(named:from:in:) to load that shader graph material and assign it to a model entity. However, on visionOS 1.2 and earlier, either in Simulator or on the device, ShaderGraphMaterial(named:from:in:) fails and I see the following logged to the console: If, using Reality Composer Pro 1.0, I experimentally open the same project and delete and recreate exactly the same nodes above, then ShaderGraphMaterial(named:from:in:) works as expected on visionOS 1.2. Is it a known issue that Reality Composer 2 can't be used with visionOS 1? Is this intentional behavior? I've submitted feedback as FB14828873, including a sample project and repro steps. If possible, I would appreciate guidance from an Apple engineer, like "This is a known issue for [list of node types]" or "Reality Composer Pro 2 is not supported for visionOS 1 development, please refer to [documentation]" or "We recommend [workaround]." Thank you.

I’m having issues getting Collision Shapes working in Reality Composer on iPadOS, or with Reality Composer Pro via Xcode on macOS? I’ve posted a video recorded through my Vision Pro showing the issue. The project i’m working on is a Dice Rolling application. The dice don’t appear to be working set as Collision Shape=Automatic, which I assume takes into account the actual silhouette of the shape. https://youtu.be/upPtQY4QOAk?si=yyx6rbSSmVkLxBLg They also don’t rest on their face when they land. Anyone experience this type of behavior and found a solution? I’m currently doing this with Reality Composer, but most likely will also be wanting to get it to work properly in Reality Composer Pro as well. Thx!