Delve into the world of graphics and game development. Discuss creating stunning visuals, optimizing game mechanics, and share resources for game developers.

All subtopics
Posts under Graphics & Games topic

Post

Replies

Boosts

Views

Activity

How to use MTKTextureLoader to load png data
I am trying to load some PNG data with MTKTextureLoader newTextureWithData,but the result shows wrong at the alpha area. Here is the code. I have an image URL, after it downloads successfully, I try to use the data or UIImagePNGRepresentation (image), they all show wrong. UIImage *tempImg = [UIImage imageWithData:data]; CGImageRef cgRef = tempImg.CGImage; MTKTextureLoader *loader = [[MTKTextureLoader alloc] initWithDevice:device]; id<MTLTexture> temp1 = [loader newTextureWithData:data options:@{MTKTextureLoaderOptionSRGB: @(NO), MTKTextureLoaderOptionTextureUsage: @(MTLTextureUsageShaderRead), MTKTextureLoaderOptionTextureCPUCacheMode: @(MTLCPUCacheModeWriteCombined)} error:nil]; NSData *tempData = UIImagePNGRepresentation(tempImg); id<MTLTexture> temp2 = [loader newTextureWithData:tempData options:@{MTKTextureLoaderOptionSRGB: @(NO), MTKTextureLoaderOptionTextureUsage: @(MTLTextureUsageShaderRead), MTKTextureLoaderOptionTextureCPUCacheMode: @(MTLCPUCacheModeWriteCombined)} error:nil]; id<MTLTexture> temp3 = [loader newTextureWithCGImage:cgRef options:@{MTKTextureLoaderOptionSRGB: @(NO), MTKTextureLoaderOptionTextureUsage: @(MTLTextureUsageShaderRead), MTKTextureLoaderOptionTextureCPUCacheMode: @(MTLCPUCacheModeWriteCombined)} error:nil]; }] resume];
5
0
592
May ’25
OS choosing performance state poorly for GPU use case
I am building a MacOS desktop app (https://anukari.com) that is using Metal compute to do real-time audio/DSP processing, as I have a problem that is highly parallelizable and too computationally expensive for the CPU. However it seems that the way in which I am using the GPU, even when my app is fully compute-limited, the OS never increases the power/performance state. Because this is a real-time audio synthesis application, it's a huge problem to not be able to take advantage of the full clock speeds that the GPU is capable of, because the app can't keep up with real-time. I discovered this issue while profiling the app using Instrument's Metal tracing (and Game tracing) modes. In the profiling configuration under "Metal Application" there is a drop-down to select the "Performance State." If I run the application under Instruments with Performance State set to Maximum, it runs amazingly well, and all my problems go away. For comparison, when I run the app on its own, outside of Instruments, the expensive GPU computation it's doing takes around 2x as long to complete, meaning that the app performs half as well. I've done a ton of work to micro-optimize my Metal compute code, based on every scrap of information from the WWDC videos, etc. A problem I'm running into is that I think that the more efficient I make my code, the less it signals to the OS that I want high GPU clock speeds! I think part of why the OS is confused is that in most use cases, my computation can be done using only a small number of Metal threadgroups. I'm guessing that the OS heuristics see that only a small fraction of the GPU is saturated and fail to scale up the power/clock state. I'm not sure what to do here; I'm in a bit of a bind. One possibility is that I intentionally schedule busy work -- spin threadgroups just to waste energy and signal to the OS that I need higher clock speeds. This is obviously a really bad idea, but it might work. Is there any other (better) way for my app to signal to the OS that it is doing real-time latency-sensitive computation on the GPU and needs the clock speeds to be scaled up? Note that game mode is not really an option, as my app also runs as an AU plugin inside hosts like Garageband, so it can't be made fullscreen, etc.
6
0
878
May ’25
Embedded links not clickable in PDFs for iOS devices
I have a SPFx React application where I am printing the HTML page content using the javascript default window.print() functionality. Once I save the page as pdf from the print preview window and open it using Adobe Acrobat, the links(for eg -> Google) within the content are not clickable and appearing as plain text. I have tried to print random pages post searching with any keywords in Google and saved the files as pdfs, but, unfortunately, the links are still not clickable there as well. To check whether it is an Adobe Acrobat issue, I have performed the same print functionality from Android devices and shared the pdf file across the iOS devices and in that case, when opened using Adobe Acrobat, the links are appearing to be clickable. I am wondering whether it is something related to how the default print functionality works for iPadOS and iOS devices. Any insights on this would be really helpful. Thanks!!! Note: The links are clickable for MacOS as well as for Windows. #ios #ipados #javascript #spfx #react
2
0
109
May ’25
vsync, drawable present, instrument gui
hi When analyzing our game using Instruments, I've always been confused about the two items "Drawable Present" and "Drawable Presented" in the GPU column. The timing of Drawable Present seems to be when the CPU layer calls commandbuffer:present, rather than when the actual encoding is completed on the GPU. Also, what does drawable presented specifically mean? In our case, when a CPU stall occurs, it appears that the vsync interval changes in the next frame, and a surface that has already been calculated is not displayed. Why is this happening?
0
0
105
May ’25
Apple Unity plugin issue
I use unity 2020.3.48f1 to develop a game; trying to implement Apple Services integration I use Apple unity plugins(https://github.com/apple/unityplugins) Using latest version of unity plugins I getting error in Unity project after plugin import It say "Not allowed platform VisionOS" When I tryed to use older version of the plugins I getting error on runtime when calling "var fetchItemsResponse = await GKLocalPlayer.Local.FetchItems();" in line 42 it drop EXC_BAD_ACCESS(code=257, address=0x0000...) error I tryed to use different commits from official repositorys and even custom branches of apple unity plugins like (https://github.com/muZZkat/unityplugins/tree/muzzkat/fix-fetch-items) but it did not help There is whole my script which trying to use apple unuity plugins using System.Threading.Tasks; using UnityEngine; using System.Collections; using System; using Apple.GameKit; using UnityEngine.UI; public class TheScript : MonoBehaviour { [SerializeField] InputField otp; string Signature; string TeamPlayerID; string Salt; string PublicKeyUrl; string Timestamp; void Start() { StartCoroutine(Call()); } private IEnumerator Call() { yield return new WaitForSeconds(5); Login(); } public async Task Login() { otp.text += $"Loginig... "; if (!Apple.GameKit.GKLocalPlayer.Local.IsAuthenticated) { try { var player = await GKLocalPlayer.Authenticate(); var localPlayer = GKLocalPlayer.Local; TeamPlayerID = localPlayer.TeamPlayerId; var fetchItemsResponse = await GKLocalPlayer.Local.FetchItems(); Signature = Convert.ToBase64String(fetchItemsResponse.GetSignature()); PublicKeyUrl = fetchItemsResponse.PublicKeyUrl; otp.text += $"Team Player ID: {TeamPlayerID} "; otp.text += $"PublicKeyUrl: {PublicKeyUrl} "; } catch(Exception e) { otp.text += $"Error: " + e.Message; } } else { Debug.Log("AppleGameCenter player already logged in."); } } async Task SignInWithAppleGameCenterAsync(string signature, string teamPlayerId, string publicKeyURL, string salt, ulong timestamp) { } }
0
1
126
May ’25
Game Center Sandbox: Achievements not unlocking in development build?
Hello Everyone I am new here, I am testing game center integration and using a development build of my IOS game. I have set up a couple of achievements in app store connect, but when I trigger them in the game then they do not unlock or show up. Okay so i am signed into the game center with a sandbox account on a test advice. Is there anything else I need to configure, or do achievements usually only work after the game is released?. I will appreciate any guidance… Thanks in Advance!!!
0
0
111
May ’25
Reality Composer Pro 2.0 shader graphs can't be loaded on visionOS 1
Using Reality Composer Pro 2.0, I created a simple shader graph that displays a texture on an unlit surface: On visionOS 2 beta, I can successfully use ShaderGraphMaterial(named:from:in:) to load that shader graph material and assign it to a model entity. However, on visionOS 1.2 and earlier, either in Simulator or on the device, ShaderGraphMaterial(named:from:in:) fails and I see the following logged to the console: If, using Reality Composer Pro 1.0, I experimentally open the same project and delete and recreate exactly the same nodes above, then ShaderGraphMaterial(named:from:in:) works as expected on visionOS 1.2. Is it a known issue that Reality Composer 2 can't be used with visionOS 1? Is this intentional behavior? I've submitted feedback as FB14828873, including a sample project and repro steps. If possible, I would appreciate guidance from an Apple engineer, like "This is a known issue for [list of node types]" or "Reality Composer Pro 2 is not supported for visionOS 1 development, please refer to [documentation]" or "We recommend [workaround]." Thank you.
7
0
1.4k
May ’25
How can I uninstall game-porting-toolkit completely
So, I'm done with GPTK and decided to delete it. The only thing I installed was brew -v install apple/apple/game-porting-toolkit and the external libraries from the ditto command. Now, I tried to remove it, but even after brew remove game-porting-toolkit brew autoremove all of the dependencies installed with brew are still there. The most obvious was game-porting-toolkit-compiler, but even after removing this there are so many libraries that are now orphaned and it's just impossible to manually identify those. Is there a way or is the easiest way to simply uninstall Homebrew completely and reinstall it again?
0
0
181
May ’25
SCNScene.write To USDZ, Node color fades
I use SCNScene.write To file ".usdz", then open the ".usdz" by SCNScene.url , all Nodes color fades. Export and load only once. The fading is not obvious. Return and repeat 4 or 5 times. It is obvious that the color is inconsistent with the original color and has become much lighter.
3
0
113
May ’25
How to obtain frame rate for iOS proMotion devices
Due to the release of ProMotion devices, the system may switch frame rates in certain scenarios, resulting in the loss of reference value for data collected through CADisplayLink callbacks at a fixed 60Hz frame rate. We cannot distinguish whether the slow callback of CADisplayLink is due to a stutter or a system switch in frame rate. I know Hitch Time Ratio, but I can't use this scheme for some reasons. How can I distinguish between stuck and frame rate gear shift in CADisplaylink callback? In iOS 15, CADisplayLink.preferredFrameRateRange.preferred always returns 0, while minimum and maximum do change. Can I use these minimum and maximum range values as criteria to distinguish between frame rate switching and stuttering?
1
0
114
May ’25
Achievement Banners Not always Showing
When running on my iPhone SE3 under IOS 18.4.1, achievement banners show as expected. The same code running on my iPad Air2 under IOS 15.8.4, achievement banners do not show, but they are accepted (as shown in the GameCenterViewController). The banners also don't show when running the simulator under iPhone 16 Pro Max under IOS 18.2 or simulator under iPhone SE3 under IOS 18.3. I haven't tried others. [Note that I clear the achievements each run during test so that I can duplicate this]
0
0
58
May ’25
Testing Achievements - Apple Documentation out of Date
New to achievements. I added them in App Store Connect and want to test them. Apple Documentation says this: "Before you begin testing your GameKit configuration, you need to enable Debug Mode. In Xcode, choose Product > Scheme > Edit Scheme. From the Run configuration, select Options and toggle Enable Debug Mode. To begin testing your achievement configuration, open the game Progress Manager. In Xcode, choose Debug > GameKit > Manage Game Progress." Sounds easy enough, but there is no "GameKit" under Debug in Xcode 16.2.
2
0
102
May ’25
GameKit Configuration File - Apple Documentation out of Date
This is the first time I have tried adding achievements to my games. The online documentation says: "Before you can access achievements in your code, you can configure them in Xcode and sync the configuration updates you make with App Store Connect. Begin configuring achievements by creating a GameKit configuration file. In Xcode, choose File > New > File from Template. Select GameKit File, and click Next. In the sheet that appears, enter a name for the configuration and click Create." Sounds easy - except Xcode 16.2 does not have a GameKit File as one of the Templates. Please advise on how to proceed and it would be nice if the documentation were updated.
1
0
97
May ’25
Gamekit Achievements Won't Unhide
Added achievements to my approved app. Added them for the next release version, which I am running in simulator. When I look at the Achievements page, I can see that there are 17 Achievements available (correct), but they all show as hidden, despite checking the "No" box in App Store Connect.
1
1
81
May ’25
Query GPU metrics
Hello! I'm a developer working on a plugin for the Elgato Stream Deck, called GPU Metrics. The plugin currently only works on Windows but I'd like to bring it to macOS. However, based on forum posts I've read (and StackOverflow) there isn't a very clear path to query GPU metrics like usage, temperature, used GPU memory, and power consumption. There are some tools out there that do similar things, but I wanted to see what would be the recommendation from Apple's engineering team to get this data via a public API. Requirements: Access GPU utilization, temperature, memory usage, power usage C/C++ based API for querying the metrics so I can expose the data to JavaScript via Node Addon No need to compatibile with Intel-based Macs, as Apple silicon will be fine for now Plugin GitHub Thank you! Noah
0
0
106
May ’25
D3DMetal unsupported CreateCommandQueue1 API while running simple wglgears using Mesa 24.3 GLon12 driver..
Hi, wanted to test if possible to use Mesa3D OGLon12+D3DMetal 2b3 to get GL>4.1 support on windows apps via D3D12Metal.. using simple wglgears.c app (similar glxgears) and running like: GALLIUM_DRIVER=d3d12 wine64 wglgears64 -info with overridden opengl32.dll using contents from: https://github.com/pal1000/mesa-dist-win/releases/download/24.3.0-rc1/mesa3d-24.3.0-rc1-release-msvc.7z I get: [D3DMetal:LOG:5E53] Unsupported API: CreateCommandQueue1 caused by: https://gitlab.freedesktop.org/mesa/mesa/-/commit/c022c9603d500b59ff5e6f93c8a214d1785ab20a API: https://learn.microsoft.com/en-us/windows/win32/api/d3d12/nf-d3d12-id3d12device9-createcommandqueue1 note setup is correct as using: GALLIUM_DRIVER=llvmpipe wine64 wglgears64 -info I get: GL_RENDERER = llvmpipe (LLVM 19.1.3, 128 bits) GL_VERSION = 4.5 (Compatibility Profile) Mesa 24.3.0-rc1 (git-85ba713d76) GL_VENDOR = Mesa GL_EXTENSIONS = GL_ARB_multisample GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_minmax GL_EXT_blend_subtract r GL_EXT_texture.. etc..
1
0
543
May ’25
CMake unable to generate the Xcode file described in this tutorial
In the Creating A 3D Application With Hydra Rendering tutorial on the Apple Developer website, on the last step where I execute this command: cmake -S ~/Users/macuser/CreatingA3DApplicationWithHydraRendering/ -B ~/Users/macuser/CreatingA3DApplicationWithHydraRendering/ I keep getting an error: CMake Error at CMakeLists.txt:5 (include): include could not find requested file: /Users/macuser/USDInstall/bin/pxrConfig.cmake I've tried to follow the instructions as mentioned in the README.md file included in the project files at least 5 times as well as moving the pxrConfig.cmake file around and copying it in different folders, then executed the command and was still unsuccessful into generating the proper file expected to compile and render the HydraPlayer renderer. How do I get cmake to generate the Xcode file to create the HydraPlayer renderer?
1
0
123
May ’25
Game Center Authentication Crashing - Unity 6, Gamekit 3.0.2
When testing my development build for gamecenter authentication, the game crashes. I've breadcrumbed it to the "await GKLocalPlayer.Authenticate();" call. Can't find any documentation on this issue and have been looking through the forums! I've already done all of the usual stuff like verifying bundle identifiers match, ensuring game center is enabled for the app, setting up app store connect, using a sandbox account, etc... Please point me to some resources if you know any. Any help is appreciated, I'm starting to lose hope here!
2
0
119
Apr ’25
Metal and Swift PM
I have run into an issue where I am trying to use atomic_float in a swift package but I cannot get things to compile because it appears that the Swift Package Manager doesn't support Metal 3 (atomic_float is Metal 3 functionality). Is there any way around this? I am using // swift-tools-version: 6.1 and my Metal code includes: #include <metal_stdlib> #include <metal_geometric> #include <metal_math> #include <metal_atomic> using namespace metal; kernel void test(device atomic_float* imageBuffer [[buffer(1)]], uint id [[ thread_position_in_grid ]]) { } But I get an error on the definition of atomic_float . Any help, one more importantly, where I could have found this information about this limitation, would be helpful. -RadBobby
0
0
75
Apr ’25
Issue with Non-Consumable In-App Purchase in Unity (iOS Sandbox Environment)
Question: I'm encountering an issue with in-app purchases (IAP) in Unity, specifically for a non-consumable product in the iOS sandbox environment. Below are the details: Environment: Unity Version: 2022.3.55f1 Unity In-App Purchasing Version: v4.12.2 Device: iPhone (15, iOS 18.1.1) Connection: Wi-Fi iOS Settings: In-App Purchases set to “Allowed” initially Problem Behavior: I attempted to purchase a non-consumable item for the first time. The payment is successfully completed by entering the password. I then background the game app and navigate to the iOS Settings to set In-App Purchases to "Don't Allow." After returning to the game and either closing or killing the app, I try to purchase the same non-consumable item again. I checked canMakePayments() through the Apple configuration, and the app correctly detected that I could not make purchases due to the restriction. I then navigate back to Settings and set In-App Purchases to "Allow." Upon returning to the game, I try purchasing the non-consumable item again. A pop-up appears, saying, "You’ve already purchased this. Would you like to get it again for free?" The issue is: Will it deduct money for the second time, and why is the system allowing the user to purchase the same non-consumable item multiple times after purchasing it once? Is this the expected behavior for Unity In-App Purchasing, or is there something I might be missing in handling non-consumable purchases in this scenario? Additional Information: I’ve confirmed that the "In-App Purchases" are set to “Allowed” before attempting the purchase again. I understand that non-consumable products should not be purchased more than once, so I’m unsure why the system is offering to let the user purchase it again. I appreciate any insights into whether this is expected behavior or if I need to adjust how I handle the purchase flow.
1
0
407
Apr ’25