I am using CHCSVParser in objective-c to use the CSVString extension of the Array instance method. When I installed a new app on iOS18.1.1, the correct value (@"Application,"abc,def"") was returned for both the first and second turns, but when I installed a new app on iOS18.2, the correct value was returned for the first turn, but @"" was returned for the second turn. Even when I debug with step into, I can enter the CSVString for the first turn, but I cannot enter it for the second turn and after. It's as if the instance method is not being generated. There are in-app purchases between the first and second turns, but the view controllers that are called are also the same. Is there any change between iOS18.1.1 and iOS18.2? [Code] NSArray *application = [NSArray arrayWithObjects:KEY_APPLICATION, @"abc,def", nil]; NSString *applistring = [application CSVString]; NSString *appliStr = [application CSVString]; [Debug window 18.1.1 First] application __NSArrayI * @"2 elements" 0x0000000302118c00 [0] __NSCFConstantString * @"Application" 0x00000001005deab8 [1] __NSCFConstantString * @"abc,def" 0x00000001005deb78 applistring __NSCFString * @"Application,"abc,def"" 0x0000000302f7d050 appliStr __NSCFString * @"Application,"abc,def"" 0x0000000302f706f0 [18.1.1 Second] application __NSArrayI * @"2 elements" 0x00000003021b5200 [0] __NSCFConstantString * @"Application" 0x00000001005deab8 [1] __NSCFConstantString * @"abc,def" 0x00000001005deb78 applistring __NSCFString * @"Application,"abc,def"" 0x0000000302ff6dc0 appliStr __NSCFString * @"Application,"abc,def"" 0x0000000302fa4d20 [18.2 First] sapplication __NSArrayI * @"2 elements" 0x00000003019d7e80 [0] __NSCFConstantString * @"Application" 0x00000001041c6ab8 [1] __NSCFConstantString * @"abc,def" 0x00000001041c6b78 applistring __NSCFString * @"Application,"abc,def"" 0x000000030179e430 appliStr __NSCFString * @"Application,"abc,def"" 0x000000030179e5e0 [18.2 Second] application __NSArrayI * @"2 elements" 0x00000003019679a0 [0] __NSCFConstantString * @"Application" 0x00000001041c6ab8 [1] __NSCFConstantString * @"abc,def" 0x00000001041c6b78 applistring __NSCFConstantString * @"" 0x00000001efa04768 appliStr __NSCFConstantString * @"" 0x00000001efa04768

We want to do below addition to iOS Mobile App. Airpod announces Push notification = which is workking now we want to use voice command that "Reply to this" and sending Reply to that notification but it is saying it is not supported in your app. So basically we need to use feature - Listen and respond to messages with AirPods Do we need to add any integration inside app for this or it will directly worked with Siri settings ? Is it possible to do in non messaging App? Is it possible to do without syncing contacts ?

Stiamo sviluppando una App per iOS con Flutter, usiamo: Flutter barcode_scan2: ^4.3.3. Gli smartphone iOS cercano di riconoscere il tipo di codice a barre letto. Se il sistema crede che il codice sia gtin13 ma le cifre risultano 12, aggiunge uno zero iniziale. Come potremmo risolvere ? Grazie Settore sviluppo App Firenze Web Division

I use Kotlin Multiplayer Development to develop iOS applications. I access the methods in the Kotlin class of the shared module in the ContentView.swift file. Functions without parameters can be used normally, but functions with parameters cannot. For example, the 78th line of code on the left side of the screenshot works, but the 79th line does not. Can someone please tell me the reason? Thank you!

I wonder if this is correct behavior. I was surprised to get this result when compiling and running the following C code with Apple clang version 14.0.0 (clang-1400.0.29.102) target arm64-apple-darwin21.6.0 on a M1 Pro 12.7.6 with cc -O2 file.c: #include <stdio.h> #include <stdlib.h> unsigned long long factorial(int n) { unsigned long long fac = 1; while (n > 0) fac *= n; return fac; } int main() { return factorial(1); } Compiling with -O2 and running this code gives "Trace/BPT trap". Checking with LLDB: $ lldb ./a.out (lldb) target create "./a.out" Current executable set to '/Users/engelen/Projects/Euler/a.out' (arm64). (lldb) run Process 79580 launched: '/Users/engelen/Projects/Euler/a.out' (arm64) Process 79580 stopped * thread #1, queue = 'com.apple.main-thread', stop reason = EXC_BREAKPOINT (code=1, subcode=0x100003fb4) frame #0: 0x0000000100003fb4 a.out`main at 20.c:9:3 [opt] 6 unsigned long long fac = 1; 7 while (n > 0) 8 fac *= n; -> 9 return fac; 10 } 11 12 int main() The loop is non-terminating. But a breakpoint trap is triggered at the return statement. The code should just hang in the loop IMO, not trap, because it never updates variable n (a correct factorial function should decrement n). Never seen this before (not since I started wiring C code in the 80s.) If I change the update *= into += then there is no trap.

When Xcode is connected to the mobile phone for debugging, the app that contains the logic of executing machine code runs normally, but if Xcode is disconnected and the app is run alone, it will crash. First use the xcode-run execution function to start the app The machine code logic executes normally Disconnect the phone from xcode Start the app 5.Crash Here is the test code：https://gitee.com/FanChiang_admin/demo.git

We are Java application developers and we have a question regarding camera access via WebRTC on iPadOS. Specifically, on iPadOS 17.1, we are encountering an issue when trying to access the camera via the WKWebView API in the Chrome browser, where an error occurs and the camera capture fails. Our investigation suggests that device access through the navigator.mediaDevices property via the WKWebView API may not work in Chrome. However, it works as expected in the Safari browser, leading us to wonder if this is a Chrome-specific limitation, or if it's due to an iPadOS setting or specification. At this point, we are unsure if this issue is related to the WKWebView and WebRTC specifications on iPadOS 17.1, or if there are specific limitations in Chrome. We would appreciate any insights or solutions regarding camera access in iPadOS 17.1 with WKWebView and WebRTC, especially in relation to Chrome.

Hello, I have a problem with Xcode, in C++ language. When I create a new project, I put my program in a file and click Build. It works correctly and without any problems, but when I enter a second file in the same project and click build, it says build failed. In the log it says, duplicate symbols appear.

Hello everyone. macOS, IOBluetooth framework. My goal is to create a temporary SDP service. According to the documentation, by default a temporary service is created (aka Persistent = NO), which is deleted after the application is closed. The documentation also mentions the IOBluetoothRemoveServiceWithRecordHandle function for forced removal of the service. This function is deprecated and is currently unavailable. I guesse that it has been replaced by the IOBluetoothSDPServiceRecord.removeServiceRecord method. The essence of the problem is that the server is not deleted either using removeServiceRecord or even after app closing. That is, if you create several services and try to delete them, they will remain alive. Only turning Bluetooth off and on in the OS helps. I tested all versions of macOS starting with Monteray. The same behavior. for (int i = 0; i < 10; i++) { service = [IOBluetoothSDPServiceRecord publishedServiceRecordWithDictionary:dictionary]; if (!service) { NSLog(@"Failed to create service"); } else { [service getRFCOMMChannelID:&channelID]; [service getServiceRecordHandle:&serverHandle]; NSLog(@"A new service has been created handle=%u, channelID=%hhu", serverHandle, channelID); if (service.removeServiceRecord != kIOReturnSuccess) { NSLog(@"Failed to delete service"); } //service.release; service = nil; } } Can someone confirm this behavior? And is there a solution? A minimal test example is available at the link

Hello, I am a software engineer student and I have recently been getting problems on my Mac regarding the C/C++ libraries. I have used my macbook for uni work for months, but around 3 or 4 months ago my macbook could not compile my work since it couldnt find the basic libraries I was using. For example, iostream. I have been using VSCode, and what it exactly says is "cannot open source file "iostream". Please run the 'Select IntelliSense Configuration...' command to locate your system headers." I have tried researching, changing the include path, even using chatgpt, and nothing. Is anyone having this same problem, or is able to help me? If any other information is needed, please let me know!

When I run app, it works on iOS16+ device. But when I run on iOS15 device just working on debug mode, if I run release or profile modeI got runtime error: Log: (lldb) dyld[4928]: Symbol not found: (_objc_claimAutoreleasedReturnValue) Referenced from: '/private/var/containers/Bundle/Application/C724D7C6-82FA-4AF3-AE83-EC035B4429A5/Runner.app/Frameworks/geolocator_apple.framework/geolocator_apple' Expected in: '/usr/lib/libobjc.A.dylib' thread #1, stop reason = signal SIGABRT frame #0: 0x0000000106cbb2cc dyld`__abort_with_payload + 8 dyld`__abort_with_payload: -&amp;gt; 0x106cbb2cc &amp;lt;+8&amp;gt;: b.lo 0x106cbb2e8 ; &amp;lt;+36&amp;gt; 0x106cbb2d0 &amp;lt;+12&amp;gt;: stp x29, x30, [sp, #-0x10]! 0x106cbb2d4 &amp;lt;+16&amp;gt;: mov x29, sp 0x106cbb2d8 &amp;lt;+20&amp;gt;: bl 0x106c8164c ; cerror_nocancel Target 0: (Runner) stopped. Flutter doctor : Doctor summary (to see all details, run flutter doctor -v): [✓] Flutter (Channel stable, 3.29.2, on macOS 15.2 24C101 darwin-arm64, locale en-VN) [✓] Android toolchain - develop for Android devices (Android SDK version 34.0.0) [✓] Xcode - develop for iOS and macOS (Xcode 16.2) [✓] Chrome - develop for the web [✓] Android Studio (version 2024.2) [✓] VS Code (version 1.97.2)

We have an iOS App built in .NET MAUI (Multi-platform App UI). This is a web view App. We wish to integrate APP Clips into this App. But we are unable to do it, due to less available resources online on such implementation. We do not wish to share code between .NET MAUI App and App clips We understand it is not possible to add APP Clips without a parent swift/Xcode app. As an alternative solution we were thinking to Create a new APP in APP Store Connect using XCode/swift and integrate app clips to it. This parent app when downloaded by users will only redirect users to our MAIN .NET MAUI app to app store connect. We need to know if such apps will be approved by APPSTORE Connect? Please guide us on this Also please do let us know if you have any other solution to integrate App clips to a .NET MAUI App

我的应用是在mac intel时发生这个问题，从dump看程序一直卡在mmap_locked，不知要怎么修改 程序dump如下 amaran.txt

I can't find the arm_neon.h header file in macOS 15.6.1 This header file defines NEON intrinsics.

When calling a perl script from an apple script (by dropping a file on it), I get the error: Can't load '/Library/Perl/5.34/darwin-thread-multi-2level/auto/Encode/Encode.bundle' for module Encode: dlopen(/Library/Perl/5.34/darwin-thread-multi-2level/auto/Encode/Encode.bundle, 0x0001): tried: '/Library/Perl/5.34/darwin-thread-multi-2level/auto/Encode/Encode.bundle' (mach-o file, but is an incompatible architecture (have 'arm64', need 'x86_64')), '/System/Volumes/Preboot/Cryptexes/OS/Library/Perl/5.34/darwin-thread-multi-2level/auto/Encode/Encode.bundle' (no such file), '/Library/Perl/5.34/darwin-thread-multi-2level/auto/Encode/Encode.bundle' (mach-o file, but is an incompatible architecture (have 'arm64', need 'x86_64')) at /System/Library/Perl/5.34/XSLoader.pm line 96. at /Library/Perl/5.34/darwin-thread-multi-2level/Encode.pm line 12. When I call the script manually from terminal, it runs fine. Why is Applescript running as X86 on M2?

I have a multi-platform application made with Delphi which uses FTDI D2XX drivers. All is well in other platforms but i have this issue in MacOS when i try to start the application: Termination Reason: Namespace DYLD, Code 1 Library missing Library not loaded: libftd2xx.dylib Referenced from: <CD2148C0-F76F-35D5-8E65-2BE51F201302> /Users/USER/*/USB_Editor.app/Contents/MacOS/USB_Editor Reason: tried: 'libftd2xx.dylib' (no such file), '/System/Volumes/Preboot/Cryptexes/OSlibftd2xx.dylib' (no such file), 'libftd2xx.dylib' (no such file), '//libftd2xx.dylib' (no such file), '/System/Volumes/Preboot/Cryptexes/OS//libftd2xx.dylib' (no such file), '//libftd2xx.dylib' (no such file) (terminated at launch; ignore backtrace) If i try to run the executable i get a similar error which includes the users/user folder in the paths specified above. So if i copy libftd2xx.dylib to users/user the app can start from the executable and the USB library works well. The library is bundled in Contents/Framework as this seems to be the best (or only) accepted practice. Btw the app only starts during deployment if the library is found in Contents/MacOS. Library version is the most recent from FTDI site for the ARM architecture and followed their instructions to install. If i try the otool command on the library i get this: otool -L libftd2xx.dylib libftd2xx.dylib: libftd2xx.dylib (compatibility version 1.1.0, current version 1.4.30) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 1336.61.1) /usr/lib/libobjc.A.dylib (compatibility version 1.0.0, current version 228.0.0) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit (compatibility version 1.0.0, current version 275.0.0) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 2202.0.0) I'm a Mac user since last week so my knowledge of the system is not so good yet (:

I am developing a simple camera JNI interface program in Objc. I managed to compile. But I get the following link error. I use the following command. Is there anything I can add to solve this problem? Note that I use Intel MacMini. g++ -framework Foundation -framework AVFoundation CameraMacOS.m Undefined symbols for architecture x86_64: "_CMVideoFormatDescriptionGetDimensions", referenced from: _openCamera in CameraMacOS-517c44.o _listWebcamNamesAndSizes in CameraMacOS-517c44.o "_CVPixelBufferGetBaseAddress", referenced from: -[CaptureDelegate captureOutput:didFinishProcessingPhoto:error:] in CameraMacOS-517c44.o "_CVPixelBufferGetBytesPerRow", referenced from: -[CaptureDelegate captureOutput:didFinishProcessingPhoto:error:] in CameraMacOS-517c44.o "_CVPixelBufferGetHeight", referenced from: -[CaptureDelegate captureOutput:didFinishProcessingPhoto:error:] in CameraMacOS-517c44.o "_CVPixelBufferGetWidth", referenced from: -[CaptureDelegate captureOutput:didFinishProcessingPhoto:error:] in CameraMacOS-517c44.o "_CVPixelBufferLockBaseAddress", referenced from: -[CaptureDelegate captureOutput:didFinishProcessingPhoto:error:] in CameraMacOS-517c44.o "_CVPixelBufferUnlockBaseAddress", referenced from: -[CaptureDelegate captureOutput:didFinishProcessingPhoto:error:] in CameraMacOS-517c44.o ld: symbol(s) not found for architecture x86_64 clang: error: linker command failed with exit code 1 (use -v to see invocation)

Hi To All. I have recently started a course that will teach me how to use C++ coding, so I can improve my career prospects. I have come across an obstacle when it comes to downloading a programming tool and that is, they are not compatible with Sequoia 1.15.1. This includes Xcode, Clion, Codelite and Vs, I am at a crossroads in my decision making on how to overcome this problem please. Can someone help withme with a solution please. Thank you.

I want to be able to write a cross-platform screensaver that works on both Windows and macOS using the Pygame 2D graphics library in Python. On Windows, this is super easy - you just write your program with three possible command line arguments: /p for preview mode, /c for the configuration dialog mode, and /s for the actual full-screen screensaver mode. Then you just use pyinstaller to build an .exe file and rename the extension to .scr, and you're good to go. However, it seems that making a screensaver on macOS is a pretty convoluted process, and there was stuff about specific Objective-C functions that you had to write, and I didn't really understand the documentation. Could you please tell me if there is any way to simply get my Python Pygame program to build as a proper .saver file? Thanks!

So I found out clang can do multiarch compiles (-arch arm64 -arch x86_64). But Apple seems to have left precompiled header support out. So I built the pch separately for each arch. That all works. The next problem is that one needs to specify -include-pch foo.x64.pch and -include-pch foo.arm64.pch on the command line. This doesn't work on the compile line, since it tries to prepend arm64 AST to a x64 .o file, and vice versa. So there is -Xarch_arm64 and -Xarch_x86_64 . But that option is limited to one argument. But "-include-pch foo.x64.pch" is two arguments. More details of failed attempts here: https://github.com/llvm/llvm-project/issues/114626 And no splitting out the builds isn't the same, because then -valid_arch I don't think skips the other build. This are all libraries being built by Make, and then the universal app built using an Xcode project from the libraries.